UDF Value is not coming in the query report

Hi all,
i have designed query report based on AR Invoice which has some UDF .
all udf have FMS applied and all these udf has values.
when i run report some times udf values are coming in the report and somtimes not even if udf contains values.
if i open perticular invoice and again update that udf and again run report now udf value will come in the report.
every time i need to manualy update the udf even if that udf contain value.
how to avoide this problem.
Pls suggest solution.
Regards,
Chetan

Hi Chetan,
Try this,
-> Open the require document(module).
Assign this procedure and then ADD the document
and Run the Query Report.
1. Goto the UDF and Click (ShiftAltF2).
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query in UDF.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the Auto Refresh Field (for example CardCode (or) Remarks).
6. Check the Display Saved Values.
OR
-> Open the require document(module).
1. Goto the UDF and Click (ShiftAltF2).
2. When will you add the document at that time
you can Click the SHIFT + F2 and than ADD the document.
and than Run the Query Report.
Regards,
Madhan.

Similar Messages

Leaving date is not available in the Query report

Hi,
I had a problem that the leaving date is not generated while running a report from the sap standard report.
Note:
I has assigned the leaving action config as
Coustomer Specific : 3
Employment: 0
Specific Payment: 0
Should we look into ADMIN LDATE switch
Anything to do with Feater "LEAVE"
Or anyother issue pls.
Thanks for the community.
Regards
sekhar

Hi,
Run the report RPLMIT00 and in the selection criteria select employment statusis not equal to 3.
Execute the report .
You can find the leaving date.
Warm Regards,
Kapil Kaushal

Data not coming to the query

Hi Experts,
I have a multiprovider build on a DSO. My query is build on the multiprovider.
Query requirement - to see the customers having no work excluding the date range provided by the user.
I have 2 variables: A & B.
This works as explained below:
Suppose the user entered the range - 03/27/2010 - 03/28/2010
then,
the variable A will get the data from 01/01/1900 to 03/27/2010 and
the variable B will get the data from 03/28/2010 to sy-datum (till date).
have both the variables as user exit.
I can see the data in the ODS & multiprovider, but when I execute the report, I cannot see any data...NO APPLICABLE DATA FOUND.
Can anyone plz help?
Preet

This is what I've written in the code:
DATA : diffdate type datum,
      g_date type datum.
if I_VNAM = ' CMUCREAL'.
IF I_STEP = 2.
    clear: l_s_range, v_mm, v_year, l_fiscper.
READ TABLE i_t_var_range into wg_t_var_range WITH KEY vnam = ' CMINMCRD'.
        if sy-subrc eq 0.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'BT'.
       l_s_range-low = '19000101'.
       diffdate = wg_t_var_range-low .
       diffdate = diffdate - 1.
       g_date = diffdate.
       l_s_range-high = g_date.
       append l_s_range to e_t_range.
     ENDIF.
    endif.
ENDIF.
    if i_vnam = ' CMUCREAH'.
      iF I_STEP = 2.
        clear: l_s_range, v_mm, v_year, l_fiscper.
READ TABLE i_t_var_range into wg_t_var_range WITH KEY vnam = 'CMINMCRD'.
        if sy-subrc eq 0.
       l_s_range-sign = 'I'.
       l_s_range-opt = 'BT'.
       diffdate = wg_t_var_range-high .
       diffdate = diffdate + 1.
       g_date = diffdate.
       l_s_range-low = g_date.
       l_s_range-high = sy-datum.
      append l_s_range to e_t_range.
endif.
endif.
endif.

Employee over manager is not reflecting in the Query

Hello Gurus
We have query reg the employee and manager :
In our Business prrocess when we run the report we will come to know the Employee and the reporting manager.
In our case manager is not in the position or left the next level manager is not coming in the picture /report. for this we need how to go ahead in fixing the issue.
Is there any std programme for it or else we need to do in the same query.....
Regards
Dineesh

Hi
Please let me confirm if you want the report to show Manager's Supervisor as Manager when a Managers Position is vacant
Yes i confirm that if the Manager position is vacant in need the one level up Manager for that Employee
Also let me know if you are using a standard query or a customised program to get this report.
I am using the standard Query in Sq02.
Thanks
Dinesh

Value does not fall within the expected range while passing a spfieldlookupvalue in a caml QUERY

i have to pass a column from master list -single line of text - and this will be the lookup of another column in another list
splist1---> column1 [ free text]
splist2--> column2 [ lookup column of the above list -splist1]
now am writing a caml query :
   objDisciNodeQuery.Query =
                                      string.Format(
                                   "<OrderBy>" +
                                     "<FieldRef Name='ID' />"
+
                                  "</OrderBy>" +
                                   "<Where>" +
                                    "<And>" +
                                      "<Eq>" +
                                         "<FieldRef
Name='somecolumn' />" +
                                         "<Value
Type='Text'>{0}</Value>" +
                                      "</Eq>" +
                                      "<Eq>" +
                                         "<FieldRef
Name='column2' LookupId='TRUE' />" +
                                         "<Value
Type='Lookup'>{1}</Value>" +
                                      "</Eq>" +
                                     "</And>" +
                                   "</Where>", valueofsomecolumn, lookupidvalueofcolumn2);
                                    SPListItemCollection splistItemAssocCollec
= null;
                                    splistItemAssocCollec = splist2.GetItems(objDisciNodeQuery);
here it throws Value does not fall within the expected range
Anyone has idea why i am getting this error, .
any ideas are appreciated.

We can use lookup column in caml query link this
<Where>
<Eq>
<FieldRef Name=’Departments’ LookupId=’TRUE’ />
<Value Type=’Lookup’>10</Value>
</Eq>
</Where>
Multi lookup column reference
http://naimmurati.wordpress.com/2013/12/03/multi-lookup-fields-in-caml-queries-eq-vs-contains/

Data from one cube is not coming in the multiprovider

Hi,
I have two cubes with a common characterstic.
I created multiprovider above these two cubes. But data is not coming from the cube 2. The values from cube 2 are showing as 0.
Can anyone help me out in this?

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Value is not coming in excise invoice ..

Hi .all,
We have created one plant . For that we did STO , delivery , PGI , and billing ( commercial and excise ). But in Excise invoice , excise value is not coming ...
Pls Advc ....

hi,
pls check whether u have done relevant setting for the new plant code.
SPRO >Log general > Tax on Goods Movements > India > Basic Settings
reg
Deepak

ALV report value is not coming in output

Hi all,
I have developed one ALV report using ABAP OOPS. i have used Custom Container to display my all values.
below are the methods i am calling to dispaly and all values is coming in T_DATASET[] ans fcat, But after Executing my report it is not displaying any value.
my container is blank in output only fcat-coltext is coming and fieldname value is not coming.
wa_fcat-fieldname = 'T_DATASET-KAVS'.
             wa_fcat-coltext = ' '.
CALL METHOD grid1->set_table_for_first_display
    CHANGING
      it_outtab       = T_DATASET[]
      it_fieldcatalog = fcat.
please guide me.
Thanks in Advance.

Check below code. And make sure you code below steps before calling set table for first display.
IF G_CUSTOM_CONTAINER1 IS INITIAL.
*     create container for ALV grid1
      CREATE OBJECT G_CUSTOM_CONTAINER1
         EXPORTING
           CONTAINER_NAME = 'CUST_CONT'.
else.
    ENDIF.
    IF GRID1 IS INITIAL.
*     create ALV grid
      CREATE OBJECT GRID1
         EXPORTING
           I_APPL_EVENTS = SELECTED    "application event
           I_PARENT = G_CUSTOM_CONTAINER1.
      G_LAYOUT1-EDIT       = 'X'.
      G_LAYOUT1-sel_mode   = '3'.
      G_LAYOUT1-NO_TOOLBAR = 'X'.
      G_LAYOUT1-ZEBRA      = 'X'.
      G_LAYOUT1-info_fname = 'ROWCOLOR'.
      G_LAYOUT1-GRID_TITLE = TEXT-006.
      G_LAYOUT1-STYLEFNAME = 'CELLTAB'.
      CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
           EXPORTING IS_LAYOUT        = G_LAYOUT1
                     IT_TOOLBAR_EXCLUDING = GT_TOOLBAR_EXCLUDING
           CHANGING IT_FIELDCATALOG = GT_FIELDCAT_LVC[]
                     IT_OUTTAB        = CONP[].

Field value is not coming in my customize ALV report

Hi All,
Good day.
I have added two fields in a customized ALV report. But the customized report was not developed by me. Therefore I am unable to understand the whole report. As per my requirement I have added 2 fields more like* quantity* & unit field in that ALV. But not understanding why values are not coming in my report though values are there in DB. Plz help me regarding this. The portion of the code is given below.
SORT t_ekbe by belnr.
loop at t_ekbe INTO w_ekbe where vgabe = '1'.
    on CHANGE OF w_ekbe-belnr.
      SELECT MBLNR
        BWART
        SMBLN
        ERFMG   " This is the new added field
        erfme     " This is the new added field
      INTO CORRESPONDING FIELDS OF TABLE t_mseg
      from mseg
      where mblnr = t_ekbe-belnr
      AND   bwart = '101'.
    endon.
ENDLOOP.
Thanks,
Tripod.

hi ,
Do according to this
SORT t_ekbe by belnr.
if t_ekbe[] is not initial .
      SELECT MBLNR
        BWART
        SMBLN
        ERFMG   " This is the new added field
        erfme     " This is the new added field
      INTO CORRESPONDING FIELDS OF TABLE t_mseg
    for all entries in t_ekbe
      from mseg
      where mblnr = t_ekbe-belnr
      AND   bwart = '101'.
endif.
after this
loop at t_ekbe .
loop at t_mseg where mblnr = t_ekbe-belnr .
t_ekbe-ERFMG = t_mseg-ERFMG .
t_ekbe-erfme =   t_mseg-erfme .
modify t_ekbe transporting ERFMG erfme .
clear t_mseg .
endloop.
clear t_ekbe .
endloop.
Regards
Deepak .

Problem in the main area of the table not coming on the same page

Hi Experts,
I have created a invoice in the table header with descriptions and main area with the values,below main area i have also created a template in smartform for calculation when i have assigned this to a transaction and i goto printpreview my main area and the calculation template are not coming in the same page,and the calculation and the header template goes to next page without main area,even if i decrease the size of main window my problem does not get solved.Is there any way out.
Please Help
Regards

Hi Summet ,
Just check in the form where your writing the code if theer are any new lines before your calculation template .
It happens that may be the form you write is unabl;e to accomadate your window size .
Try this!
Hope it helps!
Much Regards ,
Amuktha .

Sharepoint2010: ArgumentException: Value does not fall within the expected range

I have a lookup column 'usertype' in one of my list, that is lookup for another list. and in my code when i try to access this column,
item["usertype"]
i get an error: ArgumentException: Value does not fall within the expected range.
I tried with Lookup Resource Throttling in Central Administration. But still i am not able to access this field. And this field is not programmatically created.
Any idea to solve this..
Thanks in advance.

Hi Hemendra,
In the "Course " List there is a lookup field "CourseType"
which is lookup to a list having two values "Internal" and "external"
Here is my code:
SPList Course = Helpers.GetList(web, "Course");
SPListItemCollection Mycourse = Helpers.GetListItemsByField(Course, "Course_x0020_Code", "001");
string CourseType=Mycourse[0]["CourseType"].ToString();
"Helpers.GetListItemsByField" method will return proper result using CAML query. So Mycourse[0] will have all the fields except the one which i mentioned above. There are other Lookup fields in the same list and all works fine. (Assume Mycourse
will always have exactly 1 row.)
Regards,
Vikas

Value are not coming (tcode cm50)

hi expert ,
in below code values are not comes into ITAB_TXTLINES ( WA_DATA ) . we use a standard program cm50 tcode . into
customize program memory but values is not coming into wa.
values(arbpl ,werks,kapar,planr)
this is my first time i use standard progarm
so plz help
REPORT ZPP_CM50 LINE-SIZE 170..
TYPE-POOLS : SLIS.
DATA : INT_CAT TYPE SLIS_FIELDCAT_ALV,
       INT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : LS_LINE TYPE SLIS_LISTHEADER,
       VN_TOP TYPE SLIS_T_LISTHEADER,
       IT_SORT TYPE SLIS_T_SORTINFO_ALV,
       WA_SORT LIKE LINE OF IT_SORT.
DATA : LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: BEGIN OF SLIST_LISTLINE,
      LINE(1024)      TYPE   C,
      END OF SLIST_LISTLINE.
DATA: ITAB_TXTLINES LIKE SLIST_LISTLINE OCCURS 0 WITH HEADER LINE.
TABLES : CRHD , KAKO .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
      AA(20),LEVEL(20),ITEM(20),OBJ(20),OBJID(20),
      OBJDES(20),OVRFLW(20),QTY(20),UOM(20),ICT(20),
      END OF ITAB_DATA.
DATA : WA_DATA LIKE ITAB_DATA.
DATA: TEXT TYPE C LENGTH 10,
      RSPAR_TAB TYPE TABLE OF RSPARAMS,
      RSPAR_LINE LIKE LINE OF RSPAR_TAB,
      RANGE_TAB LIKE RANGE OF TEXT,
      RANGE_LINE LIKE LINE OF RANGE_TAB.
*DATA: TEXT TYPE C LENGTH 10,
     RSPAR_TAB TYPE TABLE OF RSPARAMS,
     RSPAR_LINE LIKE LINE OF RSPAR_TAB.
     RANGE_TAB LIKE RANGE OF TEXT,
     RANGE_LINE LIKE LINE OF RANGE_TAB.
DATA : LIST_TAB TYPE TABLE OF ABAPLIST.
SELECTION-SCREEN : BEGIN OF BLOCK ABC WITH FRAME TITLE TLT.
SELECTION-SCREEN   SKIP 1.
*SELECT-OPTIONS     ARBPL FOR CRHD-ARBPL.
SELECT-OPTIONS     WERKS FOR CRHD-WERKS.
SELECT-OPTIONS     KAPAR FOR KAKO-KAPAR.
SELECT-OPTIONS     PLANR FOR KAKO-PLANR.
SELECTION-SCREEN   SKIP 2.
SELECTION-SCREEN : END OF BLOCK ABC.
START-OF-SELECTION.
*RSPAR_LINE-SELNAME = 'TRUST_ID'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = 'RPF1'."'VD06011013'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'YEAR'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = '2009'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
RSPAR_LINE-SELNAME = 'REPONAME'.
RSPAR_LINE-KIND    = 'P'.
RSPAR_LINE-LOW     = 'FORM3A'.
APPEND RSPAR_LINE TO RSPAR_TAB.
CLEAR RSPAR_LINE.
SUBMIT RCCRY000 EXPORTING LIST TO MEMORY
USING SELECTION-SCREEN '1000'
                WITH CRHARBPL-LOW EQ ARBPL
                 WITH CRHWERKS-LOW EQ WERKS
                 WITH KAKKAPAR-LOW EQ KAPAR
                 WITH KAKPLANR-LOW EQ PLANR
                  AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      LISTOBJECT = LIST_TAB
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS     = 2.
CALL FUNCTION 'LIST_TO_ASCI'
    EXPORTING
      LIST_INDEX         = -1
      WITH_LINE_BREAK    = ' '
    TABLES
      LISTASCI           = ITAB_TXTLINES
      LISTOBJECT         = LIST_TAB
    EXCEPTIONS
      EMPTY_LIST         = 1
      LIST_INDEX_INVALID = 2
      OTHERS             = 3.
LOOP AT ITAB_TXTLINES .                                   "from 5.
    CLEAR WA_DATA.
    SPLIT ITAB_TXTLINES AT '|' INTO: WA_DATA-AA
                                     WA_DATA-LEVEL
                                     WA_DATA-ITEM
                                     WA_DATA-OBJ
                                     WA_DATA-OBJID
                                     WA_DATA-OBJDES
                                     WA_DATA-OVRFLW
                                     WA_DATA-QTY
                                     WA_DATA-UOM
                                     WA_DATA-ICT.
   IF ITAB_TXTLINE-SY-INDEX .
then
     DO 4 TIMES.
       REPLACE '.' IN WA_DATA-LEVEL WITH SPACE.
     ENDDO.
*DELETE ITAB_DATA-INDEX=1." WHERE WA_DATA = ITAB_DATA.
     CONDENSE WA_DATA-LEVEL.
     IF NOT WA_DATA-LEVEL IS INITIAL and not WA_DATA-LEVEL cp 'Emp*'.
        APPEND WA_DATA TO ITAB_DATA.
     ENDIF.
   ENDIF.
ENDLOOP.
thanks.

Hi,
CM50 is generated from CM10 main program for parameter 'M'. It generates it on the runtime and exports values into memory. It's less likely you will be able to generate the whole set into a Z Program.
I didn't find a function module to do so. But, with your consultants help you can create your own function module that gives results similar to CM50, it's merely calculation of capacity of workcenters for a period using the sales order booked against the work centers in that period. If you try a bit you can create it.
Good luck.
Also remember, before you post a code, use ...

Decimals not seen in the query...

Hi Guys,
I have a problem with the query..
I have loaded a KF with 2 decimal places in the cube.
But when I run a query created on the cube, the digits after the decimal place are not seen in the query.
For e.g. the value of the KF in the cube is 9.85...but in the query, it is seen as 9
please let me know where do i need to make the changes.
FYI..the unit of the KF is %. Has this got anything to do with the problem ?
thanks in advance,
Punkuj...

Hi Aby,
Sorry, i just missed to mention this imp point :
I had done the operation that you have suggested :
I am getting the following output :
In the Cube : 9.85
in the query ( after the decimal selection) : 9.00
I hope that clears my problem..
Thanks..
Punkuj

REST API - Can't expand Title of lookup columns "System.ArgumentException : Value does not fall within the expected range"

I have a list that has more than 12 columns of type lookup with more than 5000 items and I am using a date field as an indexed column so I can restrict the results to meet the list view threshold. I am also using $select to restrict the columns to
meet the lookup column threshold.
If I run the query below it all works as expected:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Id&$expand=Lookup1
If I run this query it does not work:
_api/web/Lists/MyList/items/?$Filter=Created gt '2015-03-10T05:00:00.000Z' and Created lt '2015-03-17T18:25:00.712Z'&$select=Lookup1/Title&$expand=Lookup1
Error:
<m:error xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<m:code>-2147024809, System.ArgumentException</m:code>
<m:message xml:lang="en-US">Value does not fall within the expected range.</m:message>
</m:error>
The lookup column "Lookup1" is using Title as the column's information and this should be working. What is interesting is that changing the lookup threshold has no effect on this but raising the list item view limit does make it work. The
date range is selecting less than 5000 items. So what am I missing here? I just want the Title for the lookup column and my query has about 10 items in it.

Looking through the logs the error is thrown due to the following error messages:
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields 84h8
High Field with internal name 'LookupFieldName_x005f_Title' already exists in the field cache
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
Fields ki9p
High Unable to add join related fields to the Query.[Error 0x80070057]
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General xxpm
High Unable to execute query: Error 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General 8e2s
Medium Unknown SPRequest error occurred. More information: 0x80070057
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
03/19/2015 08:26:12.12 w3wp.exe (0x6D34)
0x7F38 SharePoint Foundation
General aix9j
High SPRequest.GetListItemDataWithCallback2: UserPrincipalName=<removed>, AppPrincipalName= ,pSqlClient=<null> ,bstrUrl=siteUrl ,bstrListName=<removed> ,bstrViewName=<null> ,bstrViewXml=<View
Scope="RecursiveAll"><Query><Where><Eq><FieldRef Name="ID" /><Value Type="Counter">5481</Value></Eq></Where></Query><ViewFields><FieldRef Name="LookupFieldName"
LookupId="TRUE" /><FieldRef Name="LookupFieldName_x005f_Title" /></ViewFields><ProjectedFields><Field Name="LookupFieldName_x005f_Title" Type="Looku ,fSafeArrayFlags=SAFEARRAYFLAG_DATES_IN_UTC
3446f49c-f2d2-d0a2-89f4-59dee19b2f45
The very first message states that it is unable to add join related fields, what could be the possible cause of this? As you can see rather than specifying a date range which I know contains less than 5000 items, even filtering based on ID gives the
same result.

Amount is not coming into the Invoice for Warranty Order

Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950

Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram

UDF Value is not coming in the query report

Similar Messages

Maybe you are looking for