Data fields not filled in DSO Activation

Dear All,
I have written an End routine to extract data into a DSO to fill some data fields. The End routine will perform a lookup on another DSO and modifies the records of the result_package. The data fields are characteristics and hence in the transformation, they are set to No Transformation.
When I extracted the data into DSO, the new table has all the data fields correctly filled. But, after activating the request, all the data fileds data are erased. However, the keyfields data is still available in the Active table.
Can you please help me on this.
Thanks,
Srinivas

Hi Srinivas
I have faced the same issue.Data was coming till new table,but after activation fields were getting
blank.
There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
routine symbol with an arrow symbol
similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
exact field in the target.
Thanks,
Saveen Kumar

Similar Messages

  • 0HR_PY_1 Datasource: Fields not filled

    Hello to everyone!
    I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource  and I have realized that the extraction program doesn´t fill these fields.
    Do you know how can I do to make these fields to be filled?
    The fields are:
    - KOKRS_CO
    Controlling area 
    Not filled
    - CO_AREA_WP
    Controlling area of master cost center
    Not filled
    -LSTAR_CO
    Debited activity type
    Not filled
    VORNR_CO
    Debited transaction
    Not filled
    GSBER_CO
    Debited business area
    Not filled
    KOSTL_CO
    Debited cost center
    Not filled
    BUKRS_CO
    Debited company code
    Not filled
    NPLNR_CO
    Debited network
    Not filled
    AUFNR_CO
    Debited order
    Not filled
    PS_POSID_CO
    Debited WBS element
    Not filled
    Thanks in advance!
    Best regards,
    Mª Victoria Durá

    Thank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
    I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
    Mariví

  • Time/Date Field Not Returned in PDF

    I have created a very simple form in LiveCycle Designer 8.0. The form enables the user to input data into columns labeled "name," "change type," and "change date." I used the date/time object for the "change date" row fields.
    When my testers (using Acrobat 7.0) email the saved form back to me, all of the fields are populated with the information they entered, except the "change date" column fields. I asked if they used the flyout calendar or typed in the date manually, and all used the calendar.
    Is this a compatibility issue, or is there something I need to do to bind the chose value to the field when the form is saved?

    The issue with the time portion of date field not displaying in Data tab of a Table window has been posted before - see date format while browsing data
    I still get the problem in v1215 connecting to either 9i or 10g databases. Note that this problem does not happen in the SQL Worksheet results area, so simply querying the table data with a select doesn't test this.
    As for Ctrl-C, Ctrl-V changing the date format to MM/DD/YYYY HH24:MI:SS when copying data out of the SQL Worksheet Results - I also still get this in v1215.

  • Manual bank statement error: "Bank reference" field not filled

    Hi,
    I'm getting an error (see below) while entering details in the manual bank statement.  I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
    Did I miss something?
    Hope for your speedy reply. Thanks!
    "Bank reference" field not filled
    Message no. FV094
    Diagnosis
    An interpretation algorithm is given in transaction 003-.  This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
    The field "Bank reference" is not filled.
    System Response
    No interpretation will be carried out.
    Procedure
    Recheck your entries.

    Hi,
    The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
    In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
    Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
    You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
    IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
    Hope this helps.
    Thanks,
    Uma

  • End routine  not workind when DSO Activated

    I have code in End routine of the transformation to populate a date field (from sales header to  sales line item to have the assocaited date to populate for each line item ) to the DSO.
    The code works and displays data being populated in new data table before DSO actiavtion but when DSO is activated, the particular  field is blank.
    Please suggest.
    Thanks.

    Hi,
    Your answer is explained in the below link:
    http://help.sap.com/saphelp_smehp1/helpdata/en/48/6e375c0b104e6de10000000a421937/content.htm
    this is happening because of the "Update behaviuor in end routine".
    It has two options - only fields with active rule(Default) & All fields.  Since the default setting is that the end routine is active for fields which have and active rule for it and not for other so for the field for which u have written the code is not having any active transformation thats why its not giving any value after activation.
    Please change the properties, for how to set this option chcek the link.
    Thanks
    Dipika

  • Data is not updating from DSO to CUBE

    Hi Friends,
    Can any one please Guide me.
    Data is updating upto ODS but not from this lower level ODS to top of the  cube from last  week and displaying error as " Exception condition "DATE_INVALID" raised" .
    How i can proceed to find which date field is getting wrong date or not getting date ..Can any body tell that how we can analize the possibilities in this case to find the error and solution .I need to solve this today,Can any body guide me please.
    BR,
    Venkat

    hi
    check the transformations between dso and cube, and check any inconsistence. if not then follow the link
    http://www.consolut.com/en/s/sap-ides-access/d/s/doc/F-DATE_CONVERT_TO_FACTORYDATE
    this may help you.

  • New field NOTES required for each activity listed in BP factsheet

    Hi Experts.
    We are trying to have a new field NOTES for each activity listed in BP factsheet. For activity we have several fields like description, status , dates etc but notes (long text) is not there for the activity.
    Could anyone help us out.
    Regards,
    Rahul

    Hi Saumya,
    I want to use the standard activity notes field here.
    My requirement is to display the column Activity notes in activities assigment block of account Factsheet.
    BP_Factshheet/Activities is the view and the Context node BUILACTIVITY does not have the attribute activity notes.
    Please give your inputs
    Regards,
    Rahul

  • Master Data fields not copied to posting document

    Hello together,
    I have the problem that some fields of the supplier master data, like terms of payment and payment method are not copied into the posting document.
    For example, I am using transaction FB60 or FB01 to post a supplier invoice, but the payment method is not filled in automatically by the system although these data is available in the master data of that supplier. I debugged the program and the system is really going to the supplier master data table LFB1 and reading the information but later it is not visible.
    The wired thing is that it worked before and now it stopped working just from one day to another.
    I am happy for any help and ideas.
    Thanks a lot in advance,
    best regards, Rica

    Hi Rica,
    User need to enter payment method while posting doucment if you want to display payment method in line item.
    Anyhow, if the payment method is available in the master record than automatic payment program will consider the payment method while gerating proposal.
    Following is the F1 description for payment method in display document:-
    Payment Method
    Payment method with which this item is to be paid.
    Use
    If you enter a payment method, then only this payment method can be used in automatic payment transactions. If you do not enter a payment method, then one of the payment methods which was allowed in the master record is selected in the payment program according to specified rules.
    Procedure
    For document entry or document changes, you only enter a payment method if you want to switch off the automatic payment method selection of the payment program.
    Regards,
    Anand Raichura

  • Data is not uploaded from dso to cube

    Dear Experts,
    In one of my process chains uploading of the data is taking place from dso to the cube through DTP.
    But only data in data package 1 are transfeered .
    The data gets stuck up in data package 2 and data package 3 so the request remains in yellow state only.
    Please suggest.

    Dear All,
    As per ur issue, try to check the following,
    1) Check the short dump is there are not in SM12.
    2)If found then try to load manually  the packet2 and 3 , (we have got an option on the right most corner to load them manually).
    3) if 1 & 2 are unsuccessful, try to keep an option of PSA and load the data again.
    kindly let me know if you have any issues.
    Thanks and Kind Regards,
    Saisandeep.

  • Date field not working like a date field

    We have quite a few date objects in the Universe but only some seem to function as a date field whereas some do not.
    The easiest way to tell whether a date field is functioning as a date field seems to be to add the date fields as a filter in a query. If it is a proper date field a Calendar option appears. If it is not, no Calendar option appears.
    In the screenshot below, the Latest Approved Date functions like a proper date object and shows a calendar option. The other field does not even though it is a date field too.
    I'm checking with this forum as the Universe designer didn't have any answer for this.

    HI Vivek,
    Go to Universe Designer
    click on object (Latest Approved Date)
    click on definition
    go to TYPE scroll down and select type as DATE
    and export now check the filter it will work
    try once
    Regards,
    Ranjeet

  • Date field not updated when select on F4 value on editable ALV Grid

    Can some one look into this to see what was wrong.
    I have a report that display fields extracted from a ZTable and display on an ALV Editable Grid.
    The data are displayed as read only mode for these fields:
    Field A -   type char20 and have a search help available.
    Start Date - type dats
    End Date - type dats.
    Field B
    Field C ...
    When user select to add new record,  Field A, Start Date and End Date must be editable, the rest are read only.
    On field A because there is search help available, I have no problem select data on F4 pull down menu and the data is updated on the grid.
    But on field start date and end date, there is F4 menu and when you pull down, it shows the calendar date.  But when I select the date to change, it acts like nothing happens.  I run the debug mode and found out that in function module 'F4IF_FIELD_VALUE_REQUEST', after you select the date field, I got the return code irc = 8 from line 305 of this FM.
    Here is what I did.
    I build field catalog similar like BCALV_EDIT04  (add table type lvc_t_styl to each extracted record to indicate which field will be  editable.
    In the PBO,  I build field catalog and set style as enable for these fields:
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
          i_structure_name = p_struct
        CHANGING
          ct_fieldcat      = p_t_fieldcat.
    LOOP AT p_t_fieldcat INTO ls_fcat.
        CASE   ls_fcat-fieldname.
           when 'Field_A'.
               ls_fcat-ref_table = 'ZTABNAME'.
            ls_fcat-ref_field = 'FIELD_A'.
            ls_fcat-edit = 'X'.
            MODIFY p_t_fieldcat FROM ls_fcat.
       when 'START_DATE' or 'END_DATE'.
        ls_fcat-style = CL_GUI_ALV_GRID=>MC_STYLE_enabled.
             MODIFY p_t_fieldcat FROM ls_fcat.
       endcase.
    Just curious, I copied program BCALV_EDIT_08 to ZBCALV_EDIT08 and make field booking date as editable to test.  When I select to change booking date from F4 menu pull down, the new date is populated to the screen field.  So what was wrong between my program and BCALV_EDIT_08?  Thanks for your help.  I am stuck on this problem for 2 days and could not figure out what was wrong.

    not sure why you use that FM for date filed , you just need in the field catalog make sure that are use a date field of reference , anyway check program BCALV_EDIT_01

  • Date field not retent in Adobe form - Review

    Hi,
    I have a date field(Last day worked) which is not bound to any data view field in SFP transaction. When the form is in a Edit mode, I select a date in Last day worked field. After I click on Click & Send option, the form is in Review mode (with field editable), the Last day worked field goes blank.
    How do I save the value that I entered in Edit mode.
    Kindly advice.
    Thanks,
    Gowri

    You should bind the field to an attribute.
    Regards,
    Antony

  • Inbound Idoc - Date fields not getting saved

    Hello,
    I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
    then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
    One of the segments in IDoc type has date as a field. It is of type sy-datum.
    When I receive Idoc in SAP only date fields are not getting saved in tables.
    Is anything specific need to be done for date fields? please advice.

    check which format you are getting into sap and make sure you are coverting in into required format.

  • Created by field not filled in ITS

    Hi all.
    SRM 4.0.
    Transaction BBP_MON_SC - the field Created By is no longer being filled out in my ITS screens; web screens. However, if I process this from SAP Gui, the field is filled. Have you seen this type of behaviour before?

    Hi Dennis,
    Try notes:
    1148093 - Shopping cart monitor: Search done based on User ID
    961422 BBP_MON_SC: No search help for 'Created By'
    764135 - Shopping cart monitor: Selection according to 'Created by'
    The last note should give you some hint / direction.
    Regards,
    Prashant

  • Search Page by date field not showing up results

    Hi,
    I am using Jdev 11g and new to adf.
    My applciation needs a search page based on a date field.
    I created a viewcriteria for the object which expects a date field from the user.( the bind variable is of type Date)
    After this i dragged the viewcriteria as af:query (panel with table) on the jspx page.
    Now when i run the application, that is when i enter the date (calendar autogenerated by query component),
    it does not show up any results.
    My date field in the database has a timestamp attached to it, somewhere i read that the timestamp may be causing the problem.
    But i have not found any solution for this one.
    This looks very basic to me, i am sure i am missing soemthing important.
    Besides i even tried the approach of programmaticlly populating the Viewobject(by not using the any query component),
    i can see the Viewobject being populated in the logs( the row count) but on the display page, no rows are shown.
    I am sure i am doing something wrong for this one.
          AppModuleImpl am = this.getAm();
           ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
           System.out.println("after getting VO");
           String subDate = this.getSubDate().getValue().toString();
           String query = " to_char(SubmitDtTm,'mm/dd/yyyy') = '"+subDate+"'";
           submittalVO.setWhereClause(query);
           System.out.println("QUERY>>>> "+submittalVO.getQuery());
           submittalVO.executeQuery();
          System.out.println("after executing query "+submittalVO.getRowCount());
           this.setRenderLogTable(true);But i actually want to use the built in query component instead of programmatically doing it.
    Can someone please guide me further.
    Any help will be grt.
    Thanks in advance
    ash
    Edited by: user1175461 on Jul 15, 2010 1:18 PM

    Still not working for me either, here's exactly what I'm doing.
    My query is as follows:
    SELECT
    RO.repair_line_id,
    RO.repair_number,
    SR.customer_po_number, segment1,
    trunc(RO.creation_date) as creation_date,
    I've created a Bind Variable for the creation_date as follows:
    <Variable
    Name="createDate"
    Kind="viewcriteria"
    Type="oracle.jbo.domain.Date"/>
    Which is linked to a view criteria:
    <ViewCriteria
    Name="RepairSearchVVOCriteria"
    ViewObjectName="com.services.cs.vvo.RepairSearchVVO"
    Conjunction="AND">
    <Properties>
    <CustomProperties>
    <Property
    Name="displayOperators"
    Value="InAdvancedMode"/>
    <Property
    Name="autoExecute"
    Value="false"/>
    <Property
    Name="allowConjunctionOverride"
    Value="true"/>
    <Property
    Name="showInList"
    Value="true"/>
    <Property
    Name="mode"
    Value="Basic"/>
    </CustomProperties>
    </Properties>
    <ViewCriteriaRow
    Name="vcrow1"
    UpperColumns="1">
    <ViewCriteriaItem
    Name="CreationDate"
    ViewAttribute="CreationDate"
    Operator="="
    Conjunction="AND"
    Value=":createDate"
    IsBindVarValue="true"
    Required="Optional"/>
    </ViewCriteriaRow>
    </ViewCriteria>
    I then dragged the criteria into the page. When running it I get the following:
    AND SR.customer_id =:psCustomerId) QRSLT WHERE ( ( (CREATION_DATE = :createDate ) ) )
    <ViewObjectImpl><bindParametersForCollection> [3510] Bind params for ViewObject: [com.xxx.services.cs.vvo.RepairSearchVVO]RepairSearchAM.RepairSearchVVO1
    <OracleSQLBuilderImpl><bindParamValue> [3511] Binding param "psCustomerId": 34758
    <OracleSQLBuilderImpl><bindParamValue> [3512] Binding param "createDate": 2010-02-18
    Which never brings back any data. My date's look as follows in the database:
    '18-FEB-10'
    I never get any results for the date. I've also tried using the to_char to format the date as the same format, but that always gives a variety of errors. This is driving me batty =0 Any ideas on why it never pulls back data?
    Thanks, Graeme.

Maybe you are looking for