Created by field not filled in ITS

Hi all.
SRM 4.0.
Transaction BBP_MON_SC - the field Created By is no longer being filled out in my ITS screens; web screens. However, if I process this from SAP Gui, the field is filled. Have you seen this type of behaviour before?

Hi Dennis,
Try notes:
1148093 - Shopping cart monitor: Search done based on User ID
961422 BBP_MON_SC: No search help for 'Created By'
764135 - Shopping cart monitor: Selection according to 'Created by'
The last note should give you some hint / direction.
Regards,
Prashant

Similar Messages

  • Manual bank statement error: "Bank reference" field not filled

    Hi,
    I'm getting an error (see below) while entering details in the manual bank statement.  I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
    Did I miss something?
    Hope for your speedy reply. Thanks!
    "Bank reference" field not filled
    Message no. FV094
    Diagnosis
    An interpretation algorithm is given in transaction 003-.  This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
    The field "Bank reference" is not filled.
    System Response
    No interpretation will be carried out.
    Procedure
    Recheck your entries.

    Hi,
    The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
    In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
    Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
    You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
    IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
    Hope this helps.
    Thanks,
    Uma

  • Create table field (not record) using ADDT software

    Hi,
    I wondered if anyone can give me detailed help on how to create a table field on-the-fly instead of creating records, using ADDT software.
    For Example:
    I have two tables.
    One table holds language names and codes, ie Australia and AU for the shortened code.
    The other table holds country descriptions, but each table field is the shortened country code (in this case AU)
    So what I want to do, is when I add a new language in the admin (ie, France) then it will create france in table 1, and also create the table field FR in table 2.
    I am not up on programming, so if anyone can detail as much as possible, you will be saving my bacon here.
    Many thanks
    Mark

    Hi.
    Sounds like what you need is a "foreign key" in the detail table that points to the id of the country in the country table.
    ADDT is perfect for this even if the documetation (and this klunky forum) is now third class.
    I suggest that you read this http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=MXK3_052000_MX_K3_cont rol_panel.htm
    Make special note of Step 2, item 5, second bullet point.
    (Note item 4 demonstrates the point about pathetic documentation)
    This would be applicable to your Detail Table that needs to have its foreign key pointing to the id of the country table.
    For example, consider two tables with these fields:
    Countries:
    id_cou (the record ID)
    name_cou (the name of the country)
    isocode_cou (the ISO code for the country eg: AU for OZ)
    Details:
    id_det (the record ID)
    idcou_det (the foreign key which is the ID in the Countries table - so this is an interger field - not a text field)
    detailfield1_det (some detail info)
    detailfield2_det (some more detail info)
    etc
    etc
    So in the Dynamic LIst Wizard for the Details list you make sure that the foreign key points to the primary key of the Countries record.
    Now, here is the neat thing: When you get to creating the form for the Details table the foreign key gets displayed as a menu showing the actual names of the countries listed in the countries table.
    Experiment with that and see how you go.

  • Work email field not filling in for mail enabled security groups in sharepoint

    I've recently been trying to setup alerts to send to mail enabled security groups on our sharepoint site.
    I've created universal mail enabled security groups for this purpose, and populated them with users, and then set those in the alert field, but no one is getting alerts.
    After a lot of investigation, I've found that this is likely because the security groups listed under sharepoint in the people and groups section don't have work email fields filled in. Theres a couple of groups that work which do have this field filled
    in, but everything created recently is missing this. I can't seem to set this field up to be editable instead of importing from AD either. I've confirmed the AD import is working fine, all user details and work email fields are filled out correctly, it is
    only the security groups that are having problems.
    Does anyone have any experience with this?

    As per your description I assume that individual user gets email alert, right ?
    If no then go to central administration > operation > timer job definitions > “web application” view > select your web application in the menu bar to check if Immediate alerts working fine
    If not, please run the following operations:
    stsadm -o setproperty -propertyname alerts-enabled -propertyvalue false -url http://...
     stsadm -o setproperty -propertyname alerts-enabled -propertyvalue true -url http://...
     stsadm -o setproperty -propertyname job-immediate-alerts -propertyvalue "every 5 minutes"  -url http://...
    And then try again.
     At last, if the issue is still there, please check your email server settings in terms of the following articles:
    http://www.sharepoint-tips.com/2007/10/email-alerts-not-getting-sent-while.html
    http://social.technet.microsoft.com/Forums/en-US/sharepointworkflow/thread/36c3b5b5-af03-4f8a-b202-b62db330c21c/
     And if individual user gets an alert then you can create cutomized alert for Sec group
     Please refer
     http://sptoolbox.codeplex.com/releases/view/8255
     hope this will help you
    Regards, Pratik Vyas | SharePoint Consultant | http://sharepointpratik.blogspot.com/

  • Data fields not filled in DSO Activation

    Dear All,
    I have written an End routine to extract data into a DSO to fill some data fields. The End routine will perform a lookup on another DSO and modifies the records of the result_package. The data fields are characteristics and hence in the transformation, they are set to No Transformation.
    When I extracted the data into DSO, the new table has all the data fields correctly filled. But, after activating the request, all the data fileds data are erased. However, the keyfields data is still available in the Active table.
    Can you please help me on this.
    Thanks,
    Srinivas

    Hi Srinivas
    I have faced the same issue.Data was coming till new table,but after activation fields were getting
    blank.
    There is no necessity for doing a dummy mapping. In the transformation screen you will be having an ikon near to the delete
    routine symbol with an arrow symbol
    similar to select all and unselect all, just clikc on it and then mention the setting as Update all the target fields need to be populated.
    This will solve the issue, if it is not solved, then you can make a direct mapping to any of the field in the source, it need not be the
    exact field in the target.
    Thanks,
    Saveen Kumar

  • 0HR_PY_1 Datasource: Fields not filled

    Hello to everyone!
    I'm afraid that I need some help from you. We are extracting HR data via 0HR_PY_1 Datasource and I have noticed that some fields are not filled by the extraction program. I've read BW Online Help about this datasource  and I have realized that the extraction program doesn´t fill these fields.
    Do you know how can I do to make these fields to be filled?
    The fields are:
    - KOKRS_CO
    Controlling area 
    Not filled
    - CO_AREA_WP
    Controlling area of master cost center
    Not filled
    -LSTAR_CO
    Debited activity type
    Not filled
    VORNR_CO
    Debited transaction
    Not filled
    GSBER_CO
    Debited business area
    Not filled
    KOSTL_CO
    Debited cost center
    Not filled
    BUKRS_CO
    Debited company code
    Not filled
    NPLNR_CO
    Debited network
    Not filled
    AUFNR_CO
    Debited order
    Not filled
    PS_POSID_CO
    Debited WBS element
    Not filled
    Thanks in advance!
    Best regards,
    Mª Victoria Durá

    Thank you very much for your help but, I'm afraid that the procedure that you explained is for enhancing the datasource but my problem is that the fields already exist but they are not filled by extraction programmes. I don't understand why does SAP make this and I was wondering if there are any way to make these fields to be filled using the standard procedure. I mean, if these fields are not filled (and SAP tells you so in BW Online Help), why these fields are included in the extract structure and in the datasource?. I tend to think that there are any procedure to follow in order to fill these fields. What do you think about it?. In adition, the not-filled-fields are CO objects so it doesn´t appear to me to be very easy the filling of them.
    I don't know if anybody has been in the same situation or if is there any documentation about it that can help. Thank you for your help!
    Mariví

  • Created "Hierarchy Field" not saved in Import Mapping File

    Hello experts,
    I want to save the mapping created after having imported categories via MDM Import Manager.
    Everything works fine as I execute an initial import (In "Map Field" tab, I create a "hierarchy field" based on the three fields "Categorie Name, Categorie Name 2, Category Parent" and mapp the Split Hierarchy field consequently ).
    My problem is as I save the Mapping and try to reuse it for a new Categories import, the former "hierarchy field" does not appear anymore. I assume Saving Mapping does not save created hierarchy fields...
    Can anyone help me on this?
    Thanks in Advance
    Stephane Naigeon

    From XML, with fields "Category Name, Category Parent".
    Then in MDM Map Tab, I clone the Field "Category Name" and create the Hierarchy Field with name "Categories", parent field "Category Parent", Child Field "Category Name", and Node name field "Category Name Clone".
    Then I map the Split Hierarchy field with the destination field "Category Name [DF]", and the source field "Category Name" with the Remote Key.
    The matching field in Match Record Tab is "Category Name [DF]".
    I save then the mapping file but am not able to reuse it : as I said, the Hierarchy field disappears !

  • Elements 9 Error when creating panorama -  could not fill because there is not enough memory (RAM)

    I have elements 9. I am making a panorama using about 10 images. Each time i click in the box to fill in the edges ( content aware fill) i get the error:  could not fill because there is not enough memory (RAM).
    This is not possible, as i have a machine with 8gb of RAM, and i can clearly see that less than 5GB is utilized.
    I tried converting the individual images to jpeg as this is considerably smaller than RAW but i get the same error.
    In Photoshop preferences i have set the memory to the max amount it allows ( 3255mb in my case). why will it not let me assign more RAM to it?
    I got PSE 9 for content aware fill as i do a lot of panoramas, and if this does not work, its been a waste of 100 euros.

    Yes, this is very common. You can either up the amount of ram available to PSE in the editor preferences, or just let PSE finish the pano with unfilled edges. There is an action available in the forums at elementsvillage.com that will turn on the same kind of content aware patching that's in Photoshop and you can use that after leaving the pano creation feature.
    EDIT I see you've already upped the memory. PSE is a 32 bit program and there's a limit to how much ram such programs can see.

  • Error in address output (name not filled). Its urgent

    Hello folks,
    when  i execute smartfrom prog i m getting this error.
    Error in address output (name not filled).
    Message no. SSFCOMPOSER323
    With regards,
    Shashank Reddy

    This is because an  alternate Address Details are being Pulled and the form errors out Since there is a validation in the smartform which needs the NAME1 field to not be Blank.
    I had this issue Printing, emailing a Smart-form for a Purchase Order.  It turned out that the Storage location address was maintained for the Storage location in the PO. 
    I Deleted the Storage location address in the IM. Enterprise Structure > Definition > Materials Management > Maintain Storage Location for the Storage location.
    Table view (V_TWLAD)
    Now that the Alternate Delivery address is not checked , the issue does not arrive anymore. Note:  If the Storage location address is needed, the NAME1 field for the address should not be left blank. Once the NAME1 field is specified, there will be no error printing the Smartform
    <removed by moderator>
    Edited by: Thomas Zloch on Feb 5, 2012 9:05 AM

  • Calender field not filled in Informer Tab

    Hi All,
    I have installed and configured Compliance calibrator 5.2.
    All the rules are properly uploaded, User Risk analysis is also working fine , but in the informer tab the management view in not configured properly.
    Calender filed is not filled.
    Can anyone please tell me , what could be the reason behind it.
    Regards,
    Anubha

    I have selected all options (checked all) in the batch risk analysis section in the Full sync mode and also the same for user/role/profile synchronisation. 
    This has completed successfully. Yet the calendar tab is not filled.
    Please help.
    Thanks.

  • Create a field NOT NULL in a z table

    Hi,
    I want to create a ztable and i need to create in it a field that can't be initial but it's not a field of the key.
    Is there any kind of property to set a NOT NULL in the field??.
    Thanx.
    Jorge

    "Initial Values" Column is an Indicator that NOT NULL is forced for that fieldCheck out the documentation below for you reference.
    Use
        Select this flag if a field to be inserted in the database is to be
        filled with initial values. The initial value used depends on the data
        type of the field.
        Please note that fields in the database for which the this flag is not
        set can also be filled with initial values.
        When you create a table, all fields of the table can be defined as NOT
        NULL and filled with an initial value. The same applies when converting
        the table. Only when new fields are added or inserted, are these filled
        with initial values. An exception is key fields. These are always filled
        automatically with initial values.
        Restrictions and notes:
        o   The initial value cannot be set for fields of data types LCHR, LRAW,
            and RAW. If the field length is greater than 32, the initial flag
            cannot be set for fields of data type NUMC.
        o   If a new field is inserted in the table and the initial flag is set,
            the complete table is scanned on activation and an UPDATE is made to
            the new field. This can be very time-consuming.
        o   If the initial flag is set for an included structure, this means
            that the attributes from the structure are transferred. That is,
            exactly those fields which are marked as initial in the definition
            have this attribute in the table as well.

  • Created By and Created Date fields not showing up on Custom List form webpart

    Hi,
    I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
    <td width ="400px" valign= "top" class="ms-formbody">
    <xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
    </td>
    However these fields are not showing/populating data on the form ?? Any inputs ???
    Regards

    Hi,
    I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
    Hope it can help you.
    Xue-Mei Chang

  • Customer field not fill in FAGLFLEXT

    I'd actived a customer field (PS_PSP_PNR) in the main ledger and I'd included this field in totals table (FAGLFLEXT). I tested this customization and it worked fine.
    The problem happens when G/L account is a statistical cost element (type 90). In this situation, I fill the field (PS_PSP_PPNR) and save the document, when I'm going to check its value in the position of the document (BSEG) is filled ,but  when I check the balance of this G/L account in the table FAGLFLEXT it's empty.
    I appreciate your help in this problem.

    Dear Anto,
    In the table Enhancement, you select Additional fields and choose ZZPS_PSP_PNR.
    Field name (total)    Data element   Check Table   Short Text                                                                         Field Name
    ZZPS_PSP_PNR     PS_PSP_PNR     PRPS           Work Breakdown Structure Element (WBS Element)     PS_PSP_PNR

  • Sales Order field not filled in FAGLL03

    Hi,
    We have a reqmnt where we want to have sales order field in Tcode FAGLL03. Infact field is already there but not getting populated.
    Our GL code is Cost of Goods sold & we wanted to see Sales order field in it.
    Plz suggest
    regards
    MC

    Dear M C,
    Did you ever get an answer to this question?  I don't see anything in the thread, but maybe you found it out yourself.  I have the same problem.  I want to see the sales order and item in FAGLL03 (similar to KE5Z).  Let me know if you have a solution for this.
    Sincerely,
    MIchael

  • Language field not filled

    Hi,
    I am getting error while executing DTP
    EMPNAME : Data record 1 ('BARAK WATSON') : Language key is initial
    details : The data record 2. with the key '3.' for characteristic 1. has a blank
    language key.
    I have seen in error stack that language feld  is empty ( EN is supposed to be extracted)
    how to correct this ??
    Regards,
    Vivek

    HI,
    The reason for the error message is the blank entry for the filed. Since the there is a blank value it wont be able to genrate SID for the blank value hence the error in case you are loading to the cube. or its one of a key filed on the ODS.
    for the time beling you can chnage the data in the PSA and assigne the value to the fileld nad then load the data.
    Hope this helps.
    regards,
    Mahesh.

Maybe you are looking for