Data Flow from TXT to a table error

Hello,
I am trying to fill in the data from a .txt file I have into a table in a DB. Previously this worked fine in DTS and I can still do it when I import the DTS command but I want to update this to a data flow because the DTS commands needs to be run on 32 bit
and I'm using 64 bit.
I'm getting 3 errors:
[OLE DB Destination [322]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Destination [322]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (335)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE
DB Destination Input" (335)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (322) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (335). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
Before I changed the Flat File Source input advanced editor input and output properties to text stream [DT_TEXT] because the table has VarChar I also had an other error but this seems to be resolved. The only problem is if I look at the mappings the
input is text stream [DT_TEXT] but the output is a string and I am unable to change this in the advanced editor of the OLE DB destination. I can change it but it changes back on it's own.
Could I please get some help on these errors?
Thanks

Hi SQLNewbie101,
According to your description, when you change column data type in the advanced editor of OLE DB Destination, it always changes back.
Based on my research, the column data type is already confirmed by the destination table, it depends on the columns in the table, so we cannot change it.
To fix this issue, one way as you said, we can use Data Conversion Transformation to convert the [DT_TEXT] data type to [DT_STR] after Flat File Source. Another way is directly change the column data type in the Advanced tab of Flat File Connection Manager
Editor as below. Then double click the Flat File Source to update the columns.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Mapping data flow from R/3 to BW

Hello,
I am pretty new to BW and I have been tasked with creating a detailed map of the data flow from R/3 into BW.
I need to record where the data originates from in R/3 (field names/tables) and literally track the flow of that data all the way including any info objects along the way to any cubes that it may be sitting in.
How do I track this flow ? And how can I identify what a characteristic in BW is in R/3 ?
Has anybody had to create a similar data flow ? If so how did you approach this ?
Many Thanks,
Matt

Hi Matthew,
From the R/3 side:
BW treats all the data from R/3 as Datasources.
From the Datasource the upload of data to the cube is done as..
Datasource->Transfer Rule->psa/infosource->communication structure->cube
(for a 3.5 system)
in case of 7.0 system... data flow is as follows...
Datasource->infopackage->psa->transformation/DTP-> Data target(cube)
-> Go to transaction RSA5( for Business Content datasources ) and RSA6( for all the active Datasources ) found in the system.
-> There you can find all the data that you want...(For your mapping purpose this will do..)
-> You can as well check from the BI side in the transaction RSA1 -> click on the Monitor button on the left ( for custom objects ) or Business Content button -> choose the object from the tree... right click and replicate to find if all of them were used.
Hope this helps!!
*Reward Pts if useful*
regards,
Naveenan.

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

Data Flow from CRM to BW

Dear SAP Experts,
Greetings for the Day!
I am looking forward for some information on the Data flow happening from CRM to BW system. Some of the few queries are as below:
Do we have any settings for this data flow in Transaction SMOEAC.
How does the below setting impact the BDOC flow in BW. Also, if we un-check the “Do Not Snd”, will BDOCs
flow to BW system ? <PFA>
PS: We are on CRM 7.0 with EHP2.
Thanks!
Regards,
Kanika

Hi Kanika,
Data flow from CRM to BW happens via XIF using IDocs. You can check in transaction WE21 for your RFC destination of BW and the output parameters, which decides what data would be send to the corresponding destination.
You can also check my blog:
External Interface (XIF) Setup but this is XIF setup in general and not specific to BW.
Hope this helps.
Best Regards,
Shanthala.

Need to check the data flow from R/3 to BW server.

Hi BI experts,
This query is regarding need to check the data flow from R/3 to BW server.
As of now I have some set of reports which I would need to take up in BW. The requirement is to go through the list of transaction codes for reports in R/3 and find out if there are already any existing objects in BW system which I can use for these reports.
So, can u plz help me.

Depends what are your Tcode or Reports users run in R/3 and they want the same in BW.Then in BI Content we have Out of the box Delivered reports.You can activate those Load data and use it.
Gimme T-codes you have I can send you Standard reports in BI or Cube you can get these from.
~AK

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

Data Flow from Source systemside LUWS and Extarction strucures

Hi
Can Anybody Explain the Data flow from Source system to Bi System .Especially I mean the Extract Structure and LUWS where does they come in picture ,the core data flow of inbound and out bound queues .If any link for the document would also be helpful.
Regards
Santosh

Hi See Articles..
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Data Flow from LBWQ/SMQ1 to RSA7 in ECC (Records Comparison).
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/enterprise-data-warehousing/data%20flow%20from%20lbwq%20smq1%20to%20rsa7%20in%20ecc%20(Records%20Comparison).pdf
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
Thanks
Reddy

Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

DS 4.2 get ECC CDHDR deltas in ABAP data flow using last run log table

I have a DS 4.2 batch job where I'm trying to get ECC CDHDR deltas inside an ABAP data flow. My SQL Server log table has an ECC CDHDR last_run_date_time (e.g. '6/6/2014 10:10:00') where I select it at the start of the DS 4.2 batch job run and then update it to the last run date/time at the end of the DS 4.2 batch job run.
The problem is that CDHDR has the date (UDATE) and time (UTIME) in separate fields and inside an ABAP data flow there are limited DS functions. For example, outside of the ABAP data flow I could use the DS function concat_date_time for UDATE and UTIME so that I could have a where clause of 'concat
_date_time(UDATE, UTIME) > last_run_date_time and concat_date_time(UDATE, UTIME) <= current_run_date_time'. However, inside the ABAP data flow the DS function concat_date_time is not available. Is there some way to concatenate UDATE + UTIME inside an ABAP data flow?
Any help is appreciated.
Thanks,
Brad

Michael,
I'm trying to concatenate date and time and here's my ABAP data flow where clause:
CDHDR.OBJECTCLAS in ('DEBI', 'KRED', 'MATERIAL')
and ((CDHDR.UDATE || ' ' || CDHDR.UTIME) > $CDHDR_Last_Run_Date_Time)
and ((CDHDR.UDATE || ' ' || CDHDR.UTIME) <= $Run_Date_Time)
Here are DS print statements showing my global variable values:
$Run_Date_Time is 2014.06.09 14:14:35
$CDHDR_Last_Run_Date_Time is 1900.01.01 00:00:01
The issue is I just created a CDHDR record with a UDATE of '06/09/2014' and UTIME of '10:48:27' and it's not being pulled in the ABAP data flow. Here's selected contents of the generated ABAP file (*.aba):
PARAMETER $PARAM1 TYPE D.
PARAMETER $PARAM2 TYPE D.
concatenate CDHDR-UDATE ' ' into ALTMP1.
concatenate ALTMP1 CDHDR-UTIME into ALTMP2.
concatenate CDHDR-UDATE ' ' into ALTMP3.
concatenate ALTMP3 CDHDR-UTIME into ALTMP4.
IF ( ( ALTMP4 <= $PARAM2 )
AND ( ALTMP2 > $PARAM1 ) ).
So $PARAM1 corresponds to $CDHDR_Last_Run_Date_Time ('1900.01.01 00:00:01') and $PARAM2 corresponds to $Run_Date_Time ('2014.06.09 14:14:35'). But from my understanding ABAP data type D is for date only (YYYYMMDD) and doesn't include time, so is my time somehow being defaulted to '00:00:00' when it gets to DS? I ask this as a CDHDR record I created on 6/6 wasn't pulled during my 6/6 testing but this 6/6 CDHDR record was pulled today.
I can get last_run_date_time and current_run_date_time into separate date and time fields but I'm not sure how to build the where clause using separate date and time fields. Do you have any recommendations or is there a better way for me to pull CDHDR deltas in an ABAP data flow using something different than a last run log table?
Thanks,
Brad

Migrate data flow from 3.5 to 7.3?

Dear Experts,
After technical had upgrade SAP BW from 3.5 to 7.3, I did test migrating data flow. I found that if I specified "migration project" to another name different from DataStore Object name, I could not find related objects (e.g. transformation or DTP) under that DataStore Object. And the DataStore Object was also inactive version, even the migration was done without error.
For example
- Original DSO name = AAA was showed inactive
- Migration Project name = AAA_Migrated
- After selecting all the objects including process chains and clicking on 'Migration/Recovery' button, status showed with no error (Migration History displayed all green)
- recheck objects in transaction = RSA1
- DSO name = AAA was still showed inactive
I just wonder where all objects under DSO name = AAA were gone?
What happened to the migration project name = AAA_Migrated?
How should I find the migration project name = AAA_Migrated?
How to recover all objects under DSO name = AAA? (Just in case misspelling "migration project")?
If you have similar case mentioned above, could you share any experience how to handle this?
Thank you very much.
-WJ-

BW 7.30: Data Flow Migration tool: Migrating 3.x flows to 7.3 flows and also the recovery to 3.X flow
Regards,
Sushant

Why do my rules fail in the data flow from connector view to Meta view?

I have Meta directory 5.0 alongwith the iplanet Directory Server 5.0 installed which is working fine.
I have created an instance of NT Domain Connector which retrieves entries in a Connector view.
Where do I get the examples about writing the data flow rules for the NT Domain Connector for flowing specific entries from CV to MV. Basically I do not want the NT Groups in the MV. Also I want to create an additional attribute e.g myflag whose value should be updated manually in the CV. And now if myflag = 0 I dont want this entry to be moved to MV and if myflag = 1 the entry should be moved to MV.
I tried to write a few rule but it fails in testing only (Rule Tester). And I am not able to locate the exact error in my rule. Does it require any specific configuration ?
Thanks
Amol Talap

You should post your rule.
But either way, have you tried this:
(objectclass==ntuser) or
(objectclass!=groupofuniquenames)
The first set allows only entries that are user.
The second allows only entries that are not groups.
As for the flags, try this:
(myflag==1) or
(myflag!=1)
Same effect as above.
Further more if rule testing fails, it could that you are not referencing the right Directory when using the rule tester. The rule tester does not always point to the right location.
J.F.

Data Extraction from SAP R/3 Table View in BW

Dear All,
I am trying to create a BW query from SAP R/3 Table View.
Till now i have created a table view
Extracted Data source in R/3 Useing Tcode : RSA3
In BW Side
1. I have replicated the data source in Source system
2. Created info object
and info object catalog
and assigned it
Now i am little confused over what to do next
wheather to create ODS object in info cube,
Please guide me with rest of steps to follow.
Regards,
Gaurav

Hi,
After replicating DS in BW, you have to maintain ODS or Cube for maintaining data in BW.
After loading data into Data Targets you can create Reports based on those Data Targets.
For better reporting performance you can create Cube rather ODS.
Info Source(After Creating info Objects, you have to create a Transfer Structure to map the Fields.)
Then create a Data Target ODS/Cube.
Update rules
Info Package
Hope it helps you .
Let us know if you still have any issues.
Reg
Pra

Data needed from emp and dept tables

Wondering if somebody can querry the emp table and dept table that comes with some versions of oracle already built in.
I need the data produced from these two querries
select * from emp
select * from dept

If you look in ORACLE_HOME/sqlplus/demo you'll find demobld.sql which contains the script the build all the scott tables.

Data Flow from SAP Source (ECC) system to SAP BI system

Hi All,
I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
1) Data will be flown by using the IDOCs?
2) What all are the interfaces involved while data is transferring?
3) What will happen exactly, if you execute the PSA?.
If you have any info on this, could you please post here....I
Regards,
K.Krishna Chaitanya.

Hi Krishna,
Please go through this article :
"http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
Hope this answers all the mentioned questions.
Regards,
Sarika

SEM-BCS data extractor from ECC general ledger table(s)

We are a utility company working on an SEM-BCS implementation and use the FERC solution. We do not use the new GL. We are trying to extract the transaction data from ECC to a BI virtual remote cube. We cannot use the profit center extractor (0EC_PCA_3) as the profit center tables do not contain any ferc data. We need to be able to extract the transaction data from a general ledger table. We have run into several issues with various extractors we have tried because they donu2019t allow direct access (0FI_GL_4) or are at a summary level and we canu2019t extract group account, trading partner, and transaction type detail (0FI_GL_1). Would you have any suggestions on how to extract general ledger data with the detail information required from ECC to be able to load to a BI virtual remote cube?

We are going forward with getting the natural account detail data using the profit center extractor 0EC_PCA_3, and getting the ferc summary data using the general ledger extractor 0FI_GL_1. With our testing so far, this combination will provide us the data we need in BCS.

Data Flow from TXT to a table error

Similar Messages

Maybe you are looking for