Data getting duplicated on B2B

We are having a strnage issue of data getting duplicated on B2B, when a inbound transaction is received by TP for 2 of the Vendors we are seeing that the data is getting duplicated but the same Document Defination is being used by a 3rd trading partner too, but for that 3rd partner we are not seeing any duplicate, also for rest of the 2 Trading partners duplicate happen for couple of days and strangley one day their will be no duplicates. I have verified the WEb logs there is no duplicate entries at Web tier, so data being sent twice by TP is ruled out, Any inputs on the issue will be really helpful. I have SEV 1 SR open for the issue even oracle and working with them on the same.

Can you provide few more details -
1. Exact version and patch level of your B2B?
2. When you say duplicate then does it mean that you are seeing two business message report for same message or You see only one report at B2B and middleware is receiving the message twice?
3. Which document and exchange protocols are you using?
There were few known bugs related to duplicate message appearance so it's good that you have logged a SR in parallel with support. You might be hitting one of the known bugs. Can you also let me know the SR number please?
Regards,
Anuj

Similar Messages

  • I have an amazing number of duplicates - not photo - but other.  How can I get rid of them?   Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.

    I have an amazing number of duplicates - not photo - but other.  How can I get rid of them?   Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.

    https://discussions.apple.com/message/25888564#25888564

  • Insert of data getting missed/duplicated while using Cursor

    Hi all,
    Greeting !!
    I got a strange issue with cursor usage in a SP . Below is the cursor detail.
    Basicially the SP pulls around 2,25,000 records to a temp table(#TMP_ADJ) from there cursor picks and inserts to a physical table(B_SHEET) with some conditions.
    Recently we are facing issues in records getting inserted to B_SHEET , the strange part is if this SP is called in a specific period of time i.e every day this job runs at 2 PM GMT and we encountered some of the records getting missed to insert in to B_SHEET
    table and some time the record is getting duplicated. Around 200-300 records are getting missed.
    we retriggered i.e ran the SP again but this time it was fine, so we confrim that there is no issue with data.
    Later we postponed the same job to get triggered at 3 PM GMT post which we dint encounter the problem.
    Tough this seems to be not a problem with cursor logic, but i need experts help to identify the exact issue what happens at when the job is triggered at 2 PM GMT.
    There has been no change recently done on the SP and the same SP was running fine for past 3-4years.
    1 . What are the checks that needs to be done that affects CURSOR.
     DBA has confirmed that CPU utilization / temp db memory are fine during the period of time. And no issues with Data since the second run of the same SP is fine.
    Thanks.

    If you want suggestions out of the blue, the only recommendation I can give is that you should make sure that the cursor declartion reads:
    DECLARE cur CURSOR STATIC LOCAL FOR
    The default cursor type is dynamic. Dynamic cursors are difficult to understand and rarely perform well.
    Apart from this specific advice, I can only give generic advice since you don't share the code.
    It is a common mistake to believe that just because a piece of code produces the expected result that the code is correct. However, the code may only work as intended because of happenstance. For instance a query may be non-deterministic and produces different
    results because of the query plan.
    Other reasons for "works most of the time, but fails some times" is poor error handling, where you fail to consider errors or handle them inappropriately. In a cursor loop, a common error is also to fail to initiate local variables in the beginning
    of the loop, so that they retain their values from the previous iteration.
    What I like to emphasise once more is that just because the code works most of the time does not mean that it is correct. The fact that it under some circumstances produces incorrect results, carries much more weight. There is at least one flaw in the code
    - you only need to spot it.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Records are getting duplicated on presing enter key in table control

    Hi All,
    I am using table control in module pool program.  The issue is records are getting duplicated on press of enter key.
    I cannot use sy-ucomm enter and do some validation thing in my code. As the record should get update in int_tab(internal table). Otherwise ZSTR_TAB(table control)will be blank after pressing enter key.
    I have gone through all the previous threads on this. Have implemented sol provided in one of threads. Now records are not getting duplicated but the next line is getting disabled. The code to avoid duplication is :
    MODULE read_table_control INPUT.
      data tc-lines type i.
      DESCRIBE TABLE int_tab LINES tc-lines.
      IF tc-lines GE control-current_line.
        MODIFY int_tab FROM zstr_tab INDEX control-current_line.
      ELSE.
        IF gcreate_code = 'CREATE'.
          zstr_tab-zemp_num = gemp_num.
          INSERT zstr_tab INTO int_tab INDEX control-current_line.
        ENDIF.
        IF gchange_code = 'CHANGE'.
          MODIFY int_tab FROM zstr_tab INDEX control-current_line.
        ENDIF.
      ENDIF.
    ENDMODULE.   
    This module is in PAI. Now how to make the lines in control input enabled??
    Any other sol for avoiding duplicate records on pressing enter key?
    Thanks,
    Seema

    Hi,
    Have you written any code in when Others of case...Endcase  ?
    If Yes then checkout if there is anything wrong over there, debug and check.
    If not then write delete adgecent duplicates from Int_tab comparing key fields.
    Also check in PBO, if you have written any query that selects data from particular table and appending the internal table irrespective of entry is already exist. So you should write select query in the if...Endif block as below,
    If int_tab[] is not initial.
    select * from ZSTR_TAB
    into table int_tab
    where .........
    endif.
    If above is not the case then debug and check where exactly entries are getting duplicated so that I can have idea what exactly is happening.
    Regards,
    Umang Mehta

  • Master Data load duplicated records - 0ART_SALES_ATTR

    Hi All,
    I'm trying to load Master Data in the Test System and I'm getting an error that says that There are duplicates of the data record 70114 with the key '10 30 000000000001034170 ' for characteristic 0MAT_SALES .
    This is wrong, no data is duplicated, I already check the PSA and it's fine.
    The dataflow is the 3.5.
    The Infopackage has been set up with Update Initialization with Data Transfer.
    The PSA and the Infoobjects are empty, they have never been loaded.
    The Processing in the Infopackage has been set as PSA and Infoobject (Package by package).
    I can't modify the Infopackage as I am in a Test System.
    Any Idea on how to solve this?

    The problem was that the person who designed the dataflow made a mistake and swapeed two fields.

  • Items In safari reading list get duplicated

    For some strange reason any items that I add to my reading list in safari get duplicated, about 5 times. Same thing happens to my bookmarks that are outside the "bookmarks bar" and "bookmarks menu" folders. I have an ipad, an iphone and one computer all connected to icloud. Can anyone suggest a solution?

    Duplication can be the result of synchronizing the same data with an iOS device both in iCloud and in iTunes. Are you doing that?

  • Data got duplicated with two requests.

    I have loaded data two times one week back. Data got duplicated with two requests.
    how can I remove one request.
    If i delete one request it will affect next load. getting error again of the deleted request.
    Please suggest.
    Regards,
    kumar
    Edited by: kranthi kumar on Aug 29, 2009 2:46 PM

    Hi,
    If you have loaded to cube, you select that request and delete it or you can go for selective deletion by giving the request ID.
    If you have loaded to DSO / ODS, you need to delete the record based on only selective deletion. you cannot delete the request.
    You should be able to do without anyproblem. What is the error you are getting when loading the next request.
    Regards,
    Akhan

  • Differential Invoice - Product costs are getting duplicated

    Hi,
    I set up differential invoice process for my client. Everything is perfect except an issue on PA document where product costs and other costs are getting duplicated (hence double cost). On differential invoice, in 'Diff. Condition' tab, these costs doesnot appear for difference condition types. Yet, they are again reflected in PA document when the Differential invoice is posted.
    Can you please share if anybody has some info how the issue can be handled.
    Points will be given for approriate suggestions and answers
    Regards,
    Praveen

    Hi Stefan,
    I think creating A/P invoice with posting date=03.01.2015 would be wrong.
    Instead you may create the same with posting date=07.01.2015 and document date=03.01.2015.
    Thank You,
    JO

  • When I back up our Thunderbird email from our office computer to our laptop, all of our folders from our inbox get duplicated to our archives, or vice versa.

    When we back up our Thunderbird email from our office computer to our laptop so we can continue doing business when we are away from the office, most (if not all) of our folders get duplicated between our inbox and our archives, or vice versa, we're not sure which. All we know is that many of our folders are copied. We have 62 folders in our archive, and 74 in our inbox. After checking- it appears that our archived folders are being duplicated back in to our inbox.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Data getting truncated while exporting report to a text file in crystal 10?

    Hi All,
    I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
    HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
    The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
    When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
    What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
    Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

    Hi Venkateswaran,
    The other option to avoid truncation of the data could be
    Right click the text filed
    Click on Format Text to open the Format Editor
    On Common tab check the text box for Can Grow.
    This will prevent the data from truncating in preview as well as while exporting to text.
    Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
    Regards,
    Aditya Joshi

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • HT2905 When I sync recently bought albums to my iPhone I get duplicated tracks.  How can I resolve this.  The duplicated tracks do not appear in my itunes library, just on my iPhone.

    When I sync recently bought albums to my iPhone I get duplicated tracks.  How can I resolve this.  The duplicated tracks do not appear in my itunes library, just on my iPhone.

    It seems to happen with songs that were purchased before synchronizing the new iPhone
    I will tell you how I fixed it.
    Note: I have iTunes in spanish so I will try to translate and figure out the commands that appear on ITunes in english. I will put my translations into brackets. English is not my native language. I will do my best.
    The workaround is:
    1.- Dragg no working songs from iTunes to a folder on the hard disk. (Only for backup purposes)
    2.- Deleted those songs from iTunes library.
    3.- On the left panel in ITunes click on "Purchased" under the STORE option. All your purchased songs will appear on the right panel
    4.- At the bottom and right there is the option : "Download Previous Purchases". Click there.
    5.- Click on the option "Are not in my Library" (top right)
    6.- The songs you deleted from iTunes will appear.
    7.- Downloaded them again. (You have the option to download at the bottom right)
    8.- Syncronize your iPhone and that's all.

  • When synchronizing my iPhone 4G with Outlook 2007 in my Windows 7 PC I get duplicated folders of Contacts and Calendars in both. How can I solve it?

    When synchronizing my iPhone 4G with Outlook 2007 in my Windows 7 PC I get duplicated folders of Contacts and Calendars in both. How can I solve it?

    Well, you can go into setting>mail, contacts, calendars>add new account or through iTunes you can plug your phone into your computer, open iTunes, select your device, then select info. I hope this helps. Au revoir!

  • Scehdule Line Date getting change to future date once the Sales Order is saved

    Hello Experts,
    Good Morning to you all,
    This is with respect to the Issue we are facing for the Orders having Product Allocation on multiple materials. Please find enclosed the detials below.
    Issue : Scehdule Line Date getting change to future date once the Sales Order is saved. These Order's are having Product Allocation on multiple materials.
    Description:
    We have implemented Product Allocation few months back.
    We have Product Allocation on multiple materials which are in demand and has been reserved for the Customers of different PA behaviors.
    When we are trying to create the Sales Orders for the normal customer who is not on Product Allocation. The Order Schedule Line is getting changed to future date once the Sales Order is saved after initial creation.
    These Order's are having materials of Product Allocation.
    I have enclosed the sample screen shot of the error we are getting which saving the Sales Order and also the Order Schedule Line screen shot showing future date.
    Error Message : There may be Product Over Allocation in Delivery Group 001.
    Message No : VV023
    This is a random behavior we are coming across and out of 10 Order 2 or 3 Orders is getting this Issue.
    Please share your inputs how to rack this Issue.
    Your suggestions will be highly appreciated.
    I am unable to upload the attacments dont know what the reason.
    Thanks,
    Farhan.

    Check whether you need to carry out the coding corrections as recommended in the following note:-
    Note 52067 - Message VV023/VV024, but no prod.alloc.processing    
    But I wonder this is for older versions and not sure whether this would help you to overcome from the issue.
    G. Lakshmipathi

  • Data getting lost in essbase

    We use a replicated partition to copy data from planning to essbase application. Partition works fine and data gets copied. We have another separate maxl script which does changes to the outline. This script exports the data from essbase, clears the database, updates the outline, reimports the exported data and does a cube build. Once this maxl completes, whatever data copied from planning is lost. But if I look at the export file, planning data exist in the export file. We know import process is working fine, because other data not loaded thru partition exist in essbase.. Only data loaded from planning gets lost..
    Can someone help me on this issue?

    Hi Mahe,
    1. You maxl does the following things
    exports data
    clears data
    updates the outline
    reimports the data
    2. After you reimport,Are you trying to retrive to confirm the data ?
    3. After you reimport the data, check the properties of database ( check whether the new blocks have been loaded , and increased the count ).
    4. Are you exporting all data , or only level 0 ?
    5. If its only level 0, You need to aggregate or consolidate ( by running calculation script).
    Hope this helps
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

Maybe you are looking for