Data Guard and EHCC on Exadata over to *Non*-Exadata box -- does it work?

Storage folks are proposing to DG the Exadata over to a non-Exadata box for backup purposes. I have been told it wont work. Seems to make sense that it wouldnt. Any confirmation out there in the docs?
Daryl.

Dan.Norris wrote:
While true that the base 11.2.0.1 release was not able to decompress EHCC tables with alter table move, that functionality was made available to 11.2.0.1 starting with Exadata BP4 for 11.2.0.1 (via bug 9074066). MOS note 1316026.1 shows that 11.2.0.1 BP4 is when that functionality was added to 11.2.0.1. Technically, it wasn't "added" functionality, but rather the bug was fixed :)
Thanks for the insight on this, Dan. I hadn't tested it again after BP4 came out. That's great to hear that they were able to get that fixed up.

Similar Messages

  • DB link problem between active Data Guard and report application database

    My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
    I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
    SQL> select name, database_role, open_mode from v$database;
    NAME DATABASE_ROLE OPEN_MODE
    ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
    Problem detail is below
    I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
    SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
    Database link created.
    But when I run a query using db link from my report application database I got this below error.
    ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
    ORA-02063: preceding line from DATADB_LINK
    Then I check Active Data Guard database alart log file and get below error
    ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
    But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
    So is it a problem of DB link between active Data Guard and other database?

    Fazlul Kabir Mahfuz wrote:
    My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
    I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
    SQL> select name, database_role, open_mode from v$database;
    NAME DATABASE_ROLE OPEN_MODE
    ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
    Problem detail is below
    I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
    SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
    Database link created.
    But when I run a query using db link from my report application database I got this below error.
    ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
    ORA-02063: preceding line from DATADB_LINK
    Then I check Active Data Guard database alart log file and get below error
    ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
    But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
    So is it a problem of DB link between active Data Guard and other database?
    Check this note which is applicable for your environment
    *ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
    also
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

  • Oracle 11g Active Data Guard and SAP R3

    Hi All,
    I have a query regarding Oracle 11g Active Data Guard and SAP R3.
    Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
    I appreciate your help to provide any link or document for the same.
    Thanks,
    Vihang

    I have a query regarding Oracle 11g Active Data Guard and SAP R3.
    Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
    I appreciate your help to provide any link or document for the same.
    Oracle database 11g functionality certified by SAP, check below link
    http://www.oracle.com/us/solutions/sap/oradb11g-article-upd-1-323074.pdf
    http://www.oracle.com/technetwork/middleware/ias/downloads/osb-11gr1certmatrix.xls

  • Data Guard and XMLDB

    Has anyone set up or can provide advise on using Data Guard and XMLDB?
    Right off the top of my head I have a couple of questions:
    Can we use Active Data Guard and XMLDB?
    Can we use Logical Data Guard and XMLDB?

    Yes and yes !
    On a primary database we have a schema dedicated for xml.
    We use xml in structured and unstrucutred mode (I mean the xmldb with the xml table that make you be able to load the xml in the database and modify it, and the other that is just putting xml in lob).
    You just do your data guard for your database like another one. Working for us withtou any special things to do.

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • I updated to Yosemite and now I can't open my YNAB finance app. There is a question mark in the Dock where the App should be and when I hover over the question mark it does say YNAB but I can't open it.

    I updated to Yosemite and now I can't open my YNAB finance app. There is a question mark in the Dock where the App should be and when I hover over the question mark it does say YNAB but I can't open it. When I double click on the question mark nothing happens. Has the link to YNAB been broken with the update? Has this happened to anyone else?

    Check the Application folder.
    If it is not there, contact YNAB Finance for a OS X Yosemite compatible version of the application.
    Best.

  • I can not download the last Iphoto update, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    I can not download the last Iphoto update that I already purchased it by app store, and in the actual version 9.4.3 it does not work the sending photos by e-mail.

    Thanks for your replay,
    Finally the Iphoto 9.5 was installed...any way ..I had to go to app store to purchase it because the previous version did not updated autimatically... only shoed me that there is a new version ...but it guided me to the app store to purchase it.... and I did it because I did not know that the up date was free...and the sistem did not adviced me about that...
    I have the last up date of os x 10.9 already...
    in this new version I have no problem to send the photos by e-mail... but in the previous one it allways showed me an error message like ¨I should try later because the server does not work¨  but I tryed with 4 differents e-mail account that worked perfectly in the app Mail.
    any way, this new version is ok..
    thenks a lot
    Damian from Buenos Aires

  • HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

    I backed up and encrypted with password but on restore the password does not work. Advice

    After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
    Any suggestions please

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    Get it fixed then, make an appointment with the Apple genius bar.

  • What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What has happened to the iPad 2 finger select and drag technique?
    Since upgrading to iOS7 it does not work?
    I used this all the time to select multple images, approx 75  from an SD card containing 1000  images. Its painful indvidually selecting the images

    What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
    Please submit your feature request to Apple at this link: http://www.apple.com/feedback

  • HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

    Check the status of your warranty here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Make a Genius Bar appointment to have your iPhone checked:
    http://www.apple.com/retail/geniusbar/

  • I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
    Before 10.6.7 my system was running fine.
    I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve.  I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.  
    I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade.  Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
    As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
    Good luck.
    david

  • I connected iPad to someone else's windows computer to charge it. Their iTunes came up, and I hit cancel. Now none of my purchased apps work. What can I do?

    I connected iPad to someone else's windows computer to charge it. Their iTunes came up, and I hit cancel. Now none of my purchased apps work. What can I do?

    Okay, then what you will need to do is plug your ipad back into your friends computer; you may have to sync it with his computer, but thats okay.  When it is plugged in, click the update button.  This will take about an hour, maybe more if your friend has slow internet.  Once it is updated, reset your ipad.  When your ipad is reset, sign into your apple id.  You can now use a feature called icloud (brand new in ios 5) to download all of your apps and music you purchased back to your ipad.  You may lose some things if they were not purchased from apple, but is is better than not being able to use it at all (I think).
    If you already have ios5, then this is unnecessary (it says you are using an ipad running ios4)

  • I own an iPhone 4S and have installed ios8. Subsequently none of my apps will work. How do I uninstall and go back to the previous operating system?

    I own an iPhone 4S and have installed ios8. Subsequently none of my apps will work. How do I uninstall and go back to the previous operating system?

    Good luck at the Genius bar.
    I have figured out that if I do a hard restart of the phone the apps will work for a time, but then they begin to all freeze up again after a short time.
    This may be a problem of not enough free storage. Have you checked the storage used by your apps?
      Go to Settings > General > Usage

Maybe you are looking for