Data in tables AGR_1251, UST12 and USR12

Hi there,
I know that table AGR_1251 contains authorization data for SAP Roles. USR tables contain authorization definitions for access and UST tables contain data for SUIM reporting. The USR and UST tables that concern me are USR12 and UST12.
I have a couple of questions about these tables (AGR_1251, UST12 and USR12):
1) it seemed that these three tables were kept in sync when I created new roles and generated profiles for those roles. But when I checked other roles that were already there when the system was installed, the data for those role are not in sync. Is there a way to bring data for those role in sync for these three tables?
2) In table AGR_1251, when the value for the "LOW" field starts with "$", it indicates a variable and the actual value for that field needs to be found in table AGR_1252. When I checked the same field in table UST12, it seemed that the value were already resolved. Could I depend on this?
Thanks in advance
GG

Hi,
> 1) it seemed that these three tables were kept in sync when I created new roles and generated profiles for those roles. But when I checked other roles that were already there when the system was installed, the data for those role are not in sync. Is there a way to bring data for those role in sync for these three tables?
--> regenerate the profile shall do. If usr12 and ust12 are not in synch, run FM susr_synch_user_tables with option TABLETYPE=X
> 2) In table AGR_1251, when the value for the "LOW" field starts with "$", it indicates a variable and the actual value for that field needs to be found in table AGR_1252. When I checked the same field in table UST12, it seemed that the value were already resolved. Could I depend on this?
USR/UST12 are populated upon generating the profile! So the agr_12-data is put into usr/ust* tables then.
b.rgds, Bernhard

Similar Messages

Accessing data from tables P2050, P2051 and P2052

Hello all,
I am trying to access the data stored in P2050, P2051, and P2052. I cannot access this data directly. Is there a way to get this data through another tables??
Thanks
SL

HI!
You have to trace the transaction, which fills these structures.
Use the transaction ST05 to sqltrace them.
1. Turn on SQL trace in ST05
2. Switch to an another modus with alt-tab, enter into the transaction
3. Navigate until you will see the required data on the screen
4. Go back to ST05 with alt-tab, deactivate trace, and show results. You'll see all read tables here.
Regards
Tamá

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Insert data Flatfile table to Parent and child tables

Hi All,
I have Flatfile table which is we getting from daily txt files and i want to populate flatfile data to parent as well as child tables. parent table has primary key as ID. This ID is foreign key of child tables.
Here i have mentioned our process.
1. Flatfile duplicates has to remove with condition of daily date.
2. Before Insert parent table have to check duplicate(we have Unique key of 4 columns in parent) if duplicate is there we have to delete duplicate then Insert into parent table unique records(Primary key is ID).(here why we are delete duplicate record meaning
we getting daily files so if any records updated in future that record should be insert to parent and child table so only we delete old records and insert new records).
3.After insert parent we have to populate child tables from Flatfile table as well as we have to insert parent table primary key as foreign key of child tables.
4. if any truncation error occurs that errors should go to error log table.
Right now we are using cursor for this concept and cursor has performance issue. so we are trying to optimize other way to populate parent and child table to increase performance to populate.
Please help us to which way to do this process increase of performance .
Please can any one reply.

Hi RajVasu,
Since this issue is related to Transact-SQL, I will move this thread to Transact-SQL forum. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Table AGR_1251: Search between a range of the field "LOW" and "HIGH

Hello Experts,
i've got a problem by searching all users who have the authority for a transaction.
The transaction was written in a parameter, called p_trans.
I've the Tables AGR_1251, AGR_AGRS and AGR_USERS.
I know what I've to do.
Here is my Join.
SELECT agru~uname
INTO CORRESPONDING FIELDS OF TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~agr_name = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SELECT agru~uname
APPENDING TABLE gt_users
FROM agr_1251 as ag12
INNER JOIN agr_agrs as agrs
    ON ag12~agr_name = agrs~child_agr
INNER JOIN agr_users as agru
    ON agrs~child_agr = agru~agr_name
INNER JOIN usr01 as us
    ON agru~uname = us~bname
WHERE ag12~object = 'S_TCODE' AND
               ag12~field = 'TCD' AND
               ???? parameter p_trans between ag~low and ag~high????
SORT gt_users BY uname ASCENDING.
DELETE ADJACENT DUPLICATES FROM gt_users COMPARING uname.
Here is my question:
In my code are question marks...here i want to say, that my transaction lays between the fields LOW and HIGH.
But how can i say, that in WHERE.
I have to say... Search that agr_name, where object = s_tcode, field=tcd and where my transaction lies between.
For example: low is T and high is X and i have the transaction va21.
So i must find out, in which range lays ma transaction.
I hope somebody understands me
Thanks!
Regards,
Marcel

Hi Marcel,
You are mentioning it as a parameter between having low & high values. Is it a parameter or select option.
If its a parameter, then anyway it will have only single value at any point of time.
If its a select option, then you need to use
select * from
and tcode in s_tcode.
Thanks,
Best regards,
Prashant

Data Table Fixed rows and Scroll Bar

Hi
I have data table which displays the data dynamically, but when there is no data , the table is shrinking and moving the other elements of the page. Is there any way i can keep to fixed number of rows irrespective of data presence?
Like i need to display only 10 rows at a time, if there are 7 rows in DB, i have t o display 7 rows containing data and rest as blank .
If my data increases more than 10 rows how can i enable Scroll Bar Automatically on this?
Thanks in advance.

Then add empty row objects to the collection or datamodel which is been passed to the datatable value.

RFC WHICH CAN USE DYNAMIC SQL AS INPUT AND SHOW COMPLETE DATA FOR TABLE

Hi Expert,
I am trying to create a FM like RFC_READ_TABLE. In this table we put table name and the field name for which we write a query and option for query we get the out put only for that field in this case.
My requirement is very similar to this. But here i want to enter any table name and in option i want to write dynamic sql query for any filed of table then i want data based on this so that it will display the entire table entries.
Like TABNAMELIKE     EKKO
OTHERCON     bukrs_k = 3000.
Based on this selection it has to show the entire table fields.
To make this easy to understand i made a custom FM which are getting data from table or view and i select any field and put query it will show the result.
FUNCTION ZDYNSQL_EKKO_EKPO.
""Local Interface:
*" IMPORTING
*"     VALUE(ERNAMLIKE) TYPE CHAR15 OPTIONAL
*"     VALUE(OTHERCON) TYPE CHAR50 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE V_EKKO_EKPO
*TABLES : V_EKKO_EKPO, EKKO, EKPO.
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE EDPLINE.
*CONCATENATE 'EBELN LIKE''' EBELNLIKE '%''' INTO STR_LINE.
        CONCATENATE 'ERNAM LIKE ''' ERNAMLIKE '%''' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM V_EKKO_EKPO INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
Now here is sample code of exact requirement.
FUNCTION ZDYNSQL_TABLE_READ.
""Local Interface:
*" IMPORTING
*"     VALUE(TABNAMELIKE) TYPE DD02L-TABNAME
*"     VALUE(OTHERCON) TYPE CHAR80 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE DD02L
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE STRING.
        CONCATENATE 'TABNAME LIKE ''' TABNAMELIKE '%' 'DD02L' 'TABNAME' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM DD02L INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
In this i put table name as EKKO and put sql query as bukrs_k = 3000 it provide a short dump.
How can i solve this problem. Please provide some input or modification
Thanks And Regards
Ranjeet Singh

Hi Kris,
I tried to make sample using that link you provide to me. How can i declare Global Interface in FM and in import parameter references like "REFERENCE(I_INTERFACE_CHECK) DEFAULT SPACE".
Also it uses a function-pool.
Let me tell you about my exact requirement about FM.
I want in import parameter input as any SAP Table name like
TABNAME TYPE EKKO
OPTIONS TYPE CHAR80
I want my output to be stored in TABLES attributes as per the table name entered in import parameter. In import parameter Table name can be any one of SAP tables and Option based on that particular table. Like if i go with table EKKO and put OPTIONS as
ebelp = 4 then TABLES attributes Tab contains all the relevant data for input.
Is there any way with the help of that i can put my data into internal tables. I tried to put in TABLES as VALUE LIKE ANY but it shows that generic are not allowed. Can you provide some sample on this.
I also getting exceptions like CX_SY_DYNAMIC_OSQL_SEMANTICS, SAPSQL_INVALID_FIELDNAME.
Waiting for your valuable reply.
Thanks And Regards
Ranjeet Singh

Internal server error after query. Large amount of data in table.

Hello All,
I have created a custom search page. Before executing a query i had to call a PLSQL procedure (I had to parametrize the table by search parameters so the data in table are calculated and actual before showing to user). This is quick and should not couse any problems, but when there is a lot of data in the table, i receive an internal server error.
How to limit the query to take only 200 rows and stop or throw Exception when 200 row limit is reached?
Any clue to solve it?
Edited by: user11986623 on 2013-04-15 10:52

Hi,
Try by using below method in restricting VO rows return.
vo.setMaxFetchSize(xyz);
public void setMaxFetchSize(int max)
Maximum number of rows to fetch for this View Object. This number takes effect the next time the query for this View Object is executed.
Passing -1 to this method will retrieve an unlimited number of rows. This is the default.
Br, 903096

Issue with Data Load Table

Hi All,
       i am facing issue with apex 4.2.4 ,using the Data Load Table concept's and in this look up used the
      Where Clause option ,it seems to be not working this where clause ,Please help me on this

hi all,
    it looks this where clause not filter with 'N' data ,Please help me ,how to solve this or help me on this

Table for Customer and vendor open balance on a key date

Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.

Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu

Fetch data from table and generate attachment than mail it.

Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
               a.item_code,
               b.description item_desc,
               to_char(a.manufact_date,'ddMonyy')mfg,
               to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
               to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
               round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
               a.closing_balance_posted quantity
          from wms_stock_current_balance_v a, wms_item_setup_mast b
         where a.closing_balance > 0
           and a.item_code = b.item_code
           and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
           and nvl(b.qurantine_period,0) > 0
           and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
      order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0

Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

How to insert row in table control and save the data in tables

Hi,
I have one table control i am displaying data into table control ,
my problem is : i want to display data into read mode in table control.
but when i click on insert button on the same screen i want one blank line should inserted into table control , then i want to insert some data into table control on that row , when i click the save button . the new data inserted into the table control is insert that data into ztable ,
please give me solution
main problen is how can know inserted line in table control and pass that data into ztable.

Hi,
Follow the below logic,
PROCESS BEFORE OUTPUT.
MODULE STATUS_0001.
MODULE POPULATE_TABLE_CONTROL. --> Get the data from table store in
                                                                      ITAB
LOOP AT GT_CTRL_LP_D516 INTO GS_WA_CTRL_LP_D516
       WITH CONTROL CTRL_LP_D516
       CURSOR CTRL_LP_D516-CURRENT_LINE.
The following module moves data to control
    MODULE MOVE_TO_CONTROL.--> Move data from ITAB to table control
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT GT_CTRL_LP_D516.
ENDLOOP.
MODULE EXIT AT EXIT-COMMAND.
MODULE USER_COMMAND_0001. --> Here you have to take out the values from table control and update database table
Reward points if helpful.
Thanks and regards,
Mallareddy Rayapureddy,
Munich, Germany.

How to find out when data was deleted from table in oracle and Who deleted that

HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME                                 TYPE        VALUE
audit_file_dest                      string      /oracle/admin/pbowe/adump
audit_sys_operations                 boolean     TRUE
audit_syslog_level                   string
audit_trail                          string      DB, EXTENDED
please help
Thanks
Sam

LOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

Data in tables AGR_1251, UST12 and USR12

Similar Messages

Maybe you are looking for