Custom Field using screen exits CS01/CS02/CS03

Dear Experts,
I am using Screen exits to add some text description in CS01/CS02/CS03, my requirement is to add a field 'Product Appearance' with multiple lines for the material description. For this I have created customer field 'ZTEXT1' and appended it to STKO table. Now in screen painter(SE51) i need to add 3-4 lines of type stko-ztext1 because the product desc is of size 300-400 character.
I am not able to create 3-4 lines of type stko-ztext1. Can u plz suggest how can i add 3-4 lines of type stko-ztext1 in SE51.
I am able to create a blank field in SE51 using Edit->Grouping->Step Loop->Define, but while activating it is giving error as "Input/Outpt field STKO-ZTEXT1 and key word are not in the same screen".
Plz suggest.
Regards

Hi Kurtt,
Below are the available user exits :-
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
PCSD0014 Knowledge-based order BOM: Status
Check which one suits your requirement.
Regards
Abhii

Similar Messages

Enhancing CAT2 Screen using screen exit.

I am working for a custmer enhancement whuch requires to include a input field on the CAT2 Main screen. I am using CATS005 exit & subscreen at the top of header area.
But with this I cannot use the values that is entered in this input field for processing as technically they have not included this subscreen in PAI module.
Here is the flow logic of screen 2000 of SAPLCATS
PROCESS BEFORE OUTPUT.
global module for global settings
MODULE D2000_GLOBAL_SETTINGS.
initialization
MODULE D2000_INIT.
modify fields outside loop
MODULE D2000_MODIFY_HEADINGS.
Customer-Subscreen - carrier
CALL SUBSCREEN CATS005 INCLUDING 'SAPLCATS' SUBSCR-005.
Header-area
CALL SUBSCREEN CATS003 INCLUDING 'SAPLCATS' SUBSCR-003.
Worklist
CALL SUBSCREEN CATS001 INCLUDING 'SAPLCATS' SUBSCR-001.
Entry-screen
CALL SUBSCREEN CATS002 INCLUDING 'SAPLCATS' SUBSCR-002.
View-switches
CALL SUBSCREEN CATS004 INCLUDING 'SAPLCATS' SUBSCR-004.
PROCESS AFTER INPUT.
MODULE D2000_ABBRUCH AT EXIT-COMMAND.
Worklist
CALL SUBSCREEN CATS001.
Entry-screen
CALL SUBSCREEN CATS002.
Header-data
call subscreen cats003.
OK-Code
MODULE PROCESS_OK_CODE.
Can any body tell me how to achieve the values defined ain any Input field added using the screen exit.
Is there any other way to achieve this functionality...???

Check the documentation of the enhancment CATS0005
1. You want to enter the customer fields along with the SAP fields on
     the data entry screen. Proceed as follows:
o   Define customer Include CI_CATSDB in the ABAP/4 Dictionary. Include
     only fields in the customer name range in structure CI_CATSDB.
     Otherwise, this may cause problems during a system upgrade. Use only
     fields of type 'CHAR' and 'NUMC'.
o   Activate the customer fields using a special Customizing transaction
     for the Time Sheet.
Regards,
Naimesh Patel

Regarding field and screen exits

Hi,
     plz. send me the step-by-step procedure to create Field and Screen exit.

Screen Exits:
Screen exits are provided by SAP to allow the programmer to add his own sub screen in the already available standard SAP screen. The standard screen will have a sub screen area defined especially for this purpose. The call to this sub screen will also be present already in the standard code.
For example, there is an enhancement RVEXAKK1 available for foreign trade transactions.
As you see in the above screen in screen areas block the calling screen, its number, sub screen area and the called screen with its number are defined. Here the main screen 101 in program SAPMV86E is having a sub screen area ZUSATZ and the screen 100 from program SAPLXAKK will be the sub screen for that area.
It is mandatory for the called screen to be in a function group that starts with X. Here the function group is XAKK.
Also, if you see the above enhancement, it also has two FM exits. These two FM exits will be used to pass data to & from the sub screen. These FM calls will be in PBO & PAI modules of the main screen. These FMs are also part of the above said function group.
And the function group will not have that sub screen 100 defined. The programmer can create his own screen with the number 100(or whatever is called).
Calling of the sub screen.
sub screen call     in PBO of main screen 101          this module has the FM exit call
Sub screen call in PAI block of main screen          this module has FM exit call
Create the screen 101 in program SAPLXAKK from transaction CMOD.
Double click here to create the screen
Once screen creation is done, use the two FM exits present in the enhancement to pass data to the sub screen and get data from the sub screen.
Field Exits
1. Field exit was created with CMOD, but is not processed when calling the screen.
   o Since the field exit is not processed until PAI, an action must be
      triggered on the screen (Return, Save, ...).
   o Set profile parameter abap/fieldexit to YES and restart the
      system. Setting the profile can be done by a BASIS person.
o     To check if the parameter is set or not use transaction RZ10.
   o After activating the function module FIELD_EXIT... and the field
      exit, leave the transaction on whose screen the field exit is to
      be executed. The screen is not generated until the transaction is
      started.
   o Do not work on different application servers since there may be
      some delay before the field exit is activated.
   o The profile parameter must be set on all or none of the
      application servers.
   o If the field exit is to only be active on specific screens, check
      whether you chose the correct program and the correct screen
      number (take care with subscreens).
   o Using SE51 -> Field list, check that the screen field does have a
      reference to a data element. In the name of the field exit use the
      name of the data element and not the field name.
   o After transport, field exits are marked as active but will not be
      processed. Tip: First try deactivating the field exit once more
      and then afterwards, activate it again.

Implementation:Enhancement using screen exit:QQMA0001 for Tcode:QM01

Dear Abaper,
I am implementing the Enhancement for Quality notification using screen exit:QQMA0001 for the transaction code :QM01,QM02,QM03.
when i was creating the subscreen in function group:XQQM and after saving that subscreen(for example 100) , it is automatically stored in local object, that mean local package or development class. it is not transporable.
my requirement is , i want to transport that Project. how to do that.
if you have a any idea, please help me.
advance thanks.
with best regards,
Velmurugan.S

Dear ravi,
yes of course , I have created already customer enhancement in CMOD.but my requirement is ,
when i save that subscreen after creation of subscreen, it is not ask Package or development class.but it is taking local object(local package) automatically . what is reason, i donot know .
if you have a any idea, please help me.
thank you.
with best regards,
velmurugan.S

Error while adding custom fields using EEWB.

Hi
While trying to add custom fields using the transaction EEWB i got an error message
'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
Thanks
sureshpaul

closing this unresolved

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

How to register User custom field using PHP?

Hi!
I am looking for a way to share user specific data between connected users. For example, all participants should know each other IDs(our own system IDs, not LCCS).
User's custom fields looks the best solution for this, but I can't find a way to register one using PHP, while creating room.
How to register User's custom field using PHP? Or may be there are better solution to make such things?

Got it, just need to add new node to UserManager collection.
const USER_MANAGER_COLLECTION = 'UserManager';
static private $USER_MANAGER_CUSTOM_FIELD_CONFIGURATION = array(
   'accessModel'=>self::ROLE_VIEWER,
   'publishModel'=>self::ROLE_VIEWER,
   'persistItems'=>true,
   'modifyAnyItem'=>false,
   'userDependentItems'=>true,
   'sessionDependentItems'=>false,
   'itemStorageScheme'=>self::STORAGE_SCHEME_MANUAL,
   'allowPrivateMessages'=>true,
   'lazySubscription'=>false,
   'p2pDataMessaging'=>false
const USER_INVITE_ID_CUSTOM_FIELD = 'inviteId';
static private function createUserManagerCustomFields($room){
   $account = self::init();
   $collection = self::USER_MANAGER_COLLECTION;
   $account->subscribeCollection($room, $collection);
   $account->createNode($room, $collection, self::USER_INVITE_ID_CUSTOM_FIELD, self::$USER_MANAGER_CUSTOM_FIELD_CONFIGURATION);

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

Customize Approval Form to add custom fields using SharePoint Designer

Hi,
i have a created a Custom approval workflow using SharePoint Designer 2010. This is two steps approval WF, All i did put the variable "CancelonRejection" Value "Yes" and one Approval action with 2 different users as Serial. Right now
Status, Requested by, Consolidated comments and comment fields are available on the approval form. Now i want to add some fields with radio buttons on Approval Form, so that 1st approver can select those radio/check box. Once 1st approver will approved this
then display all the values on 2nd approver approval from or send email to 2nd approver along with all the information from 1st approver.
Thanks in advanced!

Hi,
According to your post, my understanding is that you wanted to customize Approval Form to add custom fields using SharePoint Designer.
In the SharePoint Designer, you can customize the task form.
Here is a great article for your reference:
Creating Custom Workflow Task Approval Forms with SharePoint Designer 2010
However, every task can only have one task form.
That is to say, the two approvors will have the same task form.
As a workaround, I recommend to customzie the task form using InfoPath.
You can create different view for the approvors.
You need to add form load rules to swich views based on the approvors.
More information:
Using Multiple Views in Customized List Forms
Add, delete, and switch views (pages) in a form - InfoPath
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Modify Screen CS01 CS02 CS03

Hi Experts,
I would like to know if there's a way in modifying the screen 0152 for program SAPLCSDI of transaction CS01, CS02 and CS03. We would like to make the field RC29P-AUSCH - Component Scrap to be displayed as one of the columns in the item display after the column quantity.
Is there a way in modifying the screen through any exits or BADIs?
Thanks in advance for your help!
Best Regards,
Kurtt

Hi Kurtt,
Below are the available user exits :-
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
PCSD0014 Knowledge-based order BOM: Status
Check which one suits your requirement.
Regards
Abhii

How to make a field in custom screen as display field in screen exit

Hi ,
I have created a screen exit for CO02 with a field for item text in header level as input field , when value is given and save button is cliked it gets updated in database but the problem is same field shows as input field in CO03 ( display mode ) .
Code which i have used .
in PBO
if sy-tcode = 'CO03'.
loop at screen .
if screen-name cs 'SUBSCREEN' or screen-name cs 'RESB-POTX1'.
( subscreen - screen name given in screen editor and resb-potx1 field name given in screen editor )
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
and even i tried in PAI too .....
if sy-tcode = 'CO01' or sy-tcode = 'CO02'.
update resb set POTX1 = RESB-POTX1
where aufnr = i_aufnr.
elseif sy-tcode = 'CO03'.
*oop at screen .
*f screen-name cs 'SUBSCREEN' or screen-name cs 'RESBD-SORTF'.
SCREEN-INPUT = '0'.
modify screen.
endif.
endloop.
endif.
but itshows as input field only ........how to make that custom field as display field in CO03

HI Andy,
Try this out.
FIrst check the sy-dynnr, if it is same as your custom screen number
in PBO of your custom screen
if sy-dynnr = 'YOUR_NUMBER' and sy-tcode = 'CS03'.
loop at screen
if screen-name = 'YOUR_SCREEN_NAME'
screen-input = 0.
modify screen
endif
endloop.
endif.
if it wont work they try using Tcode SHD0
Hope this will serve your purpose.
Regards
Ramchander Rao.K

ABAP: SD user-exits - custom fields using from KNVV or VBAK

Hi all,
I have a technical question.
I've created some custom fields in table KNVV. The values of these custom fields have to be used during Sales Order creation/modification for determining materials or princing, in sales order user-exits.
My question is:
During the Sales Order creation/modification, in the userexits:
Is it preferable to get directly the values of the custom fields from KNVV?
OR
Is it preferable to transfer values of the custom fields from KNVV to VBAK (which was extended with the same custom fields like KNVV...) with transfer data, and then use only VBAK?
Thanks in advance for your answers.
Have a nice day!

Anderton,
I would prefer moving them to VBAK and then using it. Why?
1. Once you have queried KNVV and moved it to VBAK you do not have to perform the select again.
2. During SO change, you already have the data in VBAK so you do not have to fetch again from KNVV.
3. Lets say the Z field was changed on KNVV after creation of SO and if your requirement is to use the Z field content when the SO was created, you cannot go back to KNVV since the data is changed. But if the same was stored in VBAK, you do not have that problem.
Thanks,
Vikram.M

Adding field to Table Control using screen exit

Hi Folks,
I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
The field is also not existing in the table, it is also added to the table using Append Structure.
Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Punit,
There are various screen user exits(QQMA0001,QQMA0008,QQMA0010,
QQMA0011,QQMA0012) available for this transaction but all are related to adding a subscreen.So, I am not very sure whether we can modify a table control for this transaction. So, If possible if u r requirement still can be acheived with creation of a subscreen then it would do only if the exits which were mentioned above belongs to u r main screen..
Regards,
Swaroop

Using Screen Exit AMPL0001 in TCode MP02 but fields are not showing.

Hello SAPients!
I created a project, added the enhancement AMPL0001, included some test fields in the subscreen, activated components and project but when I run the transaction where my custom fields are supposed to be shown this is not happening. None of my fields is displaying just the rest of fields that already were there.
I have reviewed what can be the differences between my fields and the others but I don't see any.
What am I missing?
Thanks in advance for your kind help.

Hi Klaus,
Thanks for your reply. Yes, I'm sure, I have reviewed several times. Actuallly I deactivated and reactivated my project a couple of times before you mention, now I did it again and I get the same result.
A couple of questions:
Is it normal that the new fields I add to the subscreen are grayer than the rest of fields?
Is it normal that the status of the subscreen is shown as "Modified/Activated" instead of "Activated"?
Thank you.

Field and screen exit..

Hi I am used function moduel user exit many times but I am not sure about the concept of field exit and screen exit.
Can someone elaborate it by giving an example..
Thanks.

Hi Tushar Shah
·        Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with + (a plus sign). You specify the menu items text when activating the item in an add-on project.
·        Screen Exits
Add screen layouts to applications. SAP creates screen exits by placing special subscreen areas on a standard screen and calling a customer subscreen from the standard screens flow logic.
·        Function Module Exits
Add functions to applications. Function module exits play a role in both menu and screen exits. When you add a new menu item to a standard pulldown menu, you use a function module exit to define the actions that should take place once your menu is activated. Function module exits also control the data flow between standard programs and screen exit fields.
SAP application developers create function module exits by writing calls to customer functions into the source code of standard programs. These calls have the following syntax: CALL CUSTOMER-FUNCTION 001.
From Release 4.5A, you can change field texts on screens and add data element documentation using the Modification Assistant.
Just have a look at following Link>:
http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
regards,
Vijay Raheja

Custom Field using screen exits CS01/CS02/CS03

Similar Messages

Maybe you are looking for