Data is not getting displayed into a table

Hi,
here i used 2 views
Personal info view :--user fill the details in this and clicks go...Then the user entered details should be displayed into a table view...
In context of personalinfoView i took a node as "personal" and added the details as attributes to personal node,and while mapping i mapped Controller data with PersonalinfoView...
No i have to retrive data from controller component and i have to display in table
But the table is getting displayed but no values are getting displayed..
the code for getting data from component controller i used in inplug method od table is
String tblName=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getName();
    if((tblName!=null)&& tblName.equals(""))
          wdContext.currentPersonalElement().setName(tblName);
    String tblFirstName= wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getFirstName();
     if(tblFirstName!=null && tblFirstName.equals( ""))
          wdContext.currentPersonalElement().setFirstName(tblFirstName);
    String tblEmail=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getEmail();
     if(tblEmail!=null && tblEmail.equals(""))
       wdContext.currentPersonalElement().setEmail(tblEmail);
    String tblCountry=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getCountry();
    if(tblCountry!=null && tblCountry.equals(""))
        wdContext.currentPersonalElement().setCountry(tblCountry );
    String tblGender=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getGender();
    if(tblGender!=null && tblGender.equals(""))
        wdContext.currentPersonalElement().setGender(tblGender);
    String tblSports=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getSports();
    if(tblSports!=null && tblSports.equals( ""))
        wdContext.currentPersonalElement().setSports(tblSports );
    String tblOthers=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getOtherinterests();
    if(tblOthers!=null && tblOthers.equals(""))
        wdContext.currentPersonalElement().setOtherinterests(tblOthers );

Hi Padma
You said you have context structure like this
Personal
Name
Firstname
Email
if you set personal node's cardinality 1..1 it can hold only one person's Information.i.e. personal node has only one element.
if you set the personal node's cardinality 0..n it can hold 0 to N nor of person's data.i.e. personal node has 0 to n elements
If Personal node has cardinality 0..n and it has 10 elements holding 10 person's data, and you are displaying it in a table control. If we set the selection property single only one row can be selected at a time. if it is Multi user can select multiple rows from the table.
Now in your case, there is no need to take cardinality as 0..n. Because you are holding information of one person, so the cardinality is 1..1
Regards
Abhimanyu L

Similar Messages

Table PA0045 is getting updated but data is not getting displayed in Infty

Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
Jyoti

Check if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ...

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

If Records of different list items are entered, then the data is not getting inserted in the table.

Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
CUST_CODE     NUMBER(9),
FD_AMT        NUMBER(15),
FD_INT_BAL    NUMBER(15),
TDS           NUMBER(15),
CHQ_NO        NUMBER(10),
CREATED_DATE DATE,
CREATED_BY    VARCHAR2(15 BYTE),
PREV_YR_TDS   NUMBER(15),
ADD_FD_AMT    NUMBER(15),
DESCRIPTION   VARCHAR2(100 BYTE),
P_SAP_CODE    NUMBER(10),
P_TYPE        VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY     EXECUTE_QUERY     SAVE     CLEAR     EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO                NUMBER(8)             NOT NULL,
FD_DTL_SL_NO            NUMBER(5),
ACCT_FD_NO              VARCHAR2(17 BYTE)     NOT NULL,
FD_AMT                  NUMBER(15,2),
INT_RATE                NUMBER(15,2),
SAP_GLCODE              NUMBER(10),
CATOGY_NAME             VARCHAR2(30 BYTE),
PROCESS_YR_MON          NUMBER(6),
INT_AMT                 NUMBER(16,2),
QUTERLY_FD_AMT          NUMBER(16,2),
ITAX                    NUMBER(9,2),
MATURITY_DT             DATE,
FDR_STAUS               VARCHAR2(2 BYTE),
PAY_ACC_CODE            VARCHAR2(85 BYTE),
BANK_CODE               VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE      NUMBER,
QUATERLY_PAY_DT         DATE,
CHEQUE_ON               VARCHAR2(150 BYTE),
CHEQUE_NUMBER           VARCHAR2(10 BYTE),
CHEQUE_DATE             DATE,
MICR_NUMBER             VARCHAR2(10 BYTE),
PAY_TYPE                VARCHAR2(3 BYTE),
ADD_INT_AMT             NUMBER(16,2),
ADD_QUTERLY_FD_AMT      NUMBER(16,2),
ADD_ITAX                NUMBER(16,2),
ECS_ADD_INT_AMT         NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX            NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
     Commit_form;
          UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
          UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
     INSERT INTO KEC_FDACCT_DTL
          SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
               GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
               FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
               MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
               NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
          FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
     WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
     MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
     MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.

Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this???

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Data is not getting displayed in my form

hi,
i have declared variable to hold amount in that as v_amt type konv-kwert in my program and in form interface in import parameters i gave it the same as v_amt type konv-kwert..............and in text i gave the variable v_amt.............
but it is not getting displayed................

Hi!
on the application toolbar on the top a icon is there for Field list on/off.
click on it.
below left hand side field names will be displayed.
now from the import parameter drag that parameter and drop it in the text boc where you are to display it.
try this way.....it can work.....sometimes there is problem when u don't drag and drop the fields from the list box in the text nodes.
Regards.

Error in SNC SMI Scenario - Demand Data is Not Getting Displayed

Hi All SCM SNC APO Members,
                                              For SMI scenario I am sending Stock and Demand data from R/3 to SNC(5.1) System. The Stock data(Safety Sotck, Stock on hand etc) is visible in XML messages but demand is not getting updated in Supplier view in SNC.
What could be the reson behind that and how it will be rectified?
Please let me know which program and which table/keyfigure is responsible and how can i correct this.
I am using standard SAP settings.
Do i need to execute any report to update demand?
Regards,
SK

Hi SK,
Make the following SPRO settings if it is not there:
Step 1:          Goto SPRO--->SAP SCM - Implementation Guide -->
                     SCM Basis-->
                     Processing Inbound and Outbound Messages-->
                     Process Types for Inbound Messages-->
                     Determine Default Process Types
                     Checked XML PROACT_I ProductActivityNotification - Inbound should be linked to ICH - Supplier Collaboration.
Step 2:         Goto SPRO--->SAP SCM - Implementation Guide -->
                    SCM Basis-->
                    Processing Inbound and Outbound Messages-->
                    Process Types for Inbound Messages-->
                    Define Sender- and Recipient-Dependent Process Types
                    Click on new entry enter as follows:
                   XML Message:   PROACT_I ProductActivityNotification
                   Send. System
                   Sender
                   Recipient        : <Supplier_location>
                   Process Type :ICH - Supplier Collaboration
After above setting you should get Stock and demand in Web UI.
Regards,
Nikhil.

Data is not getting displayed after Exception,mysterious cause?

Hi, Good Afternoon all,
I'm Kittu. I have got a peculiar problem(it seems peculiar atleast to me) in my application, i donno whether it is programmatic error or problem with the environment that i'm using.
In my application,I'm using java with NetBeans 5.5.1(Server being Tomcat). Problem is : once I get certain kind of exceptions in 'Bundled Tomcat(log)' window of Netbeans output, all the data and content that generally gets displayed in 'Bundled Tomcat' window of NetBeans output.(Note that these two are different windows) , gets erased and no more displaying is happening. Dont know what must be the problem. Please, if anybody knows the cause of such situation, DO RESPOND. I'll be waiting for your replies.Thanx in advance.
---Kittu.

It's likely what'd confusing you is the way Netbeans automatically switches between tabbed windows in the Output area at the bottom of the window.
There's a variety of windows to look at (especially when running a server), but it only shows one at a time, and will switch to the one with the latest output. To see the window you were previously looking at you'll have to switch back by clicking a tab.

Data is not being displayed into DataGridview until Clicked inside the cells

Hi,
On a windows form, I have a DataGridView, its columns are auto-generated every time. Data is loaded after the user click a data-load button. However this is NOT working well, the data is not displayed until manually clicked inside the grid cells. The following
is the code. Could you please help? Thanks!
private void ButtonTestGrid_Click(object sender, EventArgs e)
            for (int i = 0; i < 10; i++)
                this.MainDataGrid.Columns.Add(TestHelper.CreateTextBoxColumn("Col" + i.ToString(), 120));
            Dictionary<string, object>[] data;
            data = TestHelper.CreateTestData();
            this.MainDataGrid.EndEdit();
            TestHelper.LoadGridData(this.MainDataGrid, data);
            this.MainDataGrid.Refresh();
public class TestHelper
        public static DataGridViewTextBoxColumn CreateTextBoxColumn(string name, int width)
            DataGridViewTextBoxColumn column = new DataGridViewTextBoxColumn();
            column.HeaderText = name;
            column.Name = name;
            column.ReadOnly = false;
            column.Width = width;
            return column;
        public static void LoadGridData(System.Windows.Forms.DataGridView grid, Dictionary<string, object>[] data)
            int index;
            foreach (Dictionary<string, object> row in data)
                index = grid.Rows.Add();
                LoadRowData(grid, index, row);
        public static void LoadRowData(System.Windows.Forms.DataGridView grid, int index, Dictionary<string, object> data)
            string name;
            for (int i = 0; i < grid.Columns.Count; i++)
                name = grid.Columns[i].Name;
                if (data.ContainsKey(name))
                    grid.Rows[index].Cells[name].Value = data[name];
        public static Dictionary<string, object>[] CreateTestData()
            Dictionary<string, object>[] dataList = new Dictionary<string, object>[5];
            Dictionary<string, object> data;
            for (int j = 0; j < 5; j++)
                data = new Dictionary<string, object>();
                for (int i = 0; i < 10; i++)
                    data.Add("Col" + i.ToString(), i);
                dataList[j] = data;
            return dataList;

There are different ways to bind the datagridview control to it's datasource, the question is where and what is your datasource? Is it from a database or XML file, or is it built on runtime...etc?
Based on your explanation I can understand that the Datagridview is binding correctly in the code behind since the rows of the grid are created. Because the row of the Datagridview are created only while it is binded correctly to it's datasource. The issue
of the display seems something different and strange.
Try also this way by using DataTable one the common ways used:
static DataTable GetTable()
// Here we create a DataTable with four columns.
DataTable table = new DataTable();
table.Columns.Add("Dosage", typeof(int));
table.Columns.Add("Drug", typeof(string));
table.Columns.Add("Patient", typeof(string));
table.Columns.Add("Date", typeof(DateTime));
// Here we add five DataRows.
table.Rows.Add(25, "Indocin", "David", DateTime.Now);
table.Rows.Add(50, "Enebrel", "Sam", DateTime.Now);
table.Rows.Add(10, "Hydralazine", "Christoff", DateTime.Now);
table.Rows.Add(21, "Combivent", "Janet", DateTime.Now);
table.Rows.Add(100, "Dilantin", "Melanie", DateTime.Now);
return table;
Then to bind the above Datatable to the grid control:
this.MainGrid.DataSource = null;//To clear before bind
this.MainGrid.DataSource = GetTable();
Fouad Roumieh

Custom field not getting added into MSEG table throuhBADI MB_MIGO_BADI

i have created a new tab in MIGO transaction and created a zfield called ZZcert . i have also created one append structure in MSEG table with field name ZZCERT .
i have created new tab for migo using BADI MB_MIGO_BADI . when i enter value in ZZCERT in MIGO transaction , it is not updated in MSEG table . but in debugging mode im able to see the value in (SAPLMIGO)MSEG . i have tried the option of using Field symbols also . but it didnt work .
I have searched in the forum for suitable answers.
can anybody guide me how to update the ZZCERT value into MSEG table ??
thanks in advance
pavan

Hi,
if i am not wrong these are standard transactions..when you have created a screen then for your field you can click on "get from dictionary" and the map your field(drag a field from MSEG directly on to the custom field on screen) and the you have to activate the screen....i think thats the only thing you need to do so as to update the field value in database...
or else as sugegsted by the post above you need to use BDC recording to update the databse table MSEG.
Abhijeet.

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Records Not Getting Displayed in Advanced Table

Hi All ,
I am rendering an advanced table that displays some records . i have created a VO that is tagged to this Table . The Table was displaying the records satisfactorily initially . Now suddenly the table shows no Search Conducted .
I checked the VO and the AM . I found out that the query gets executed when the executeQuery() Method is called . The records are also fetched . (i verified this using methods like getRowCount() , getFetchedRowCount() , getRowCountInRange )
But the records dont get displayed on the page . What could be the problem . Kindly Help !
Thanks
Chirag Shah

Did you make any change to VO later on which might have change the column aliases?
If you are sure of VO returning the rows during page call, then I will suggest to delete the mapping from table and do that again.
--Shiv

In a popup the tree table data is not getting displayed properly

Hi,
I have a taskflow which contains a tree table within a panelStetchLayout. Following is the taskflow code :
<af:panelStretchLayout id="SecurityAdminManageRoles" bottomHeight="0" topHeight="auto" inlineStyle="width:725px;height:400px;">
<f:facet name="center">
<af:treeTable value="#{bindings.WebCenterSecurityDCPermission.treeModel}" var="node" expandAllEnabled="true" fetchSize="150" verticalGridVisible="false" horizontalGridVisible="true" columnSelection="none" rowBandingInterval="0" columnStretching="last" contentDelivery="immediate" summary="#{uib_o_w_w_r_WebCenter.SECURITY_PERMISSIONS}" disclosedRowKeys="#{webcenterAdminSecurityBean.disclosedRowKeySet}" inlineStyle="border:none" binding="#{webcenterAdminSecurityBean.rolesTable}" id="tt2" styleClass="AFStretchWidth" autoHeightRows="150">
<f:facet name="nodeStamp">
<af:column width="260"
selected="false" noWrap="false" id="c3">
<f:facet name="header">
<af:outputText value="#{uib_o_w_w_r_WebCenter.LABEL_PERMISSIONS}"
id="ot5"/>
</f:facet>
<af:panelGroupLayout id="pgl26">
<af:forEach items="#{bindings.getRoleHeaders.result}" var="role">
<af:outputText value="#{role.value}" visible="false" id="ot1"/>
<af:selectBooleanCheckbox selected="#{node.dataProvider.serviceActions[role.value]}"
rendered="#{!node.dataProvider.serviceHeader}"
label="#{null}"
disabled="#{(node.dataProvider.readOnly and role.seededRole) or node.dataProvider.actionDisabledMap[role.value] == true}"
simple="true" id="sbc2">
<f:attribute name="permission" value="#{node}"/>
</af:selectBooleanCheckbox>
</af:forEach>
<af:spacer width="5" id="s2"/>
<af:outputText value="#{node.name}" noWrap="false" id="ot2"
inlineStyle="#{node.dataProvider.serviceHeader? 'font-weight:bolder;': ''}"/>
</af:panelGroupLayout>
</af:column>
</f:facet>
<af:column headerText="#{uib_o_w_w_r_WebCenter.LABEL_DESCRIPTION}" rowHeader="unstyled" noWrap="false" id="c1">
<af:outputText value="#{node.description}" noWrap="false"
inlineStyle="color:grey;" id="ot3"/>
</af:column>
</af:treeTable>
</f:facet>
</af:panelStretchLayout>
</jsp:root>
This taskflow is included as a region within another page :
<af:commandToolbarButton id="cb3"
shortDesc="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION_HINT}"
icon="/adf/webcenter/edit_sm_ena.png"
text="#{uib_o_w_w_r_WebCenter.LABEL_EDIT_PERMISSION}"
inlineStyle="align:left">
<af:showPopupBehavior popupId="managePopup"/>
</af:commandToolbarButton>
<af:popup id="managePopup" contentDelivery="lazyUncached">
<af:dialog modal="true" type="cancel"
title="#{requestContext.formatter[uib_o_w_s_r_Spaces.EDIT_ROLE][pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value == webcenterAdminSecurityBean.spacesUsersRole ? uib_o_w_s_r_Spaces.LABEL_AUTH_USER : pageFlowScope.o_w_wa_spacesRoleBacker1.selectedRole.value]}"
titleIconSource="/adf/webcenter/empty.png" id="d4">
<af:region value="#{bindings.editroletaskflow.regionModel}"
id="r2"/>
<f:facet name="buttonBar">
<af:commandButton partialSubmit="true"
text="#{uib_o_w_w_r_WebCenter.LABEL_SAVE}"
actionListener="#{o_w_w_i_v_b_webCenterViewUtilsBean.saveChangesAndCloseWCLinksPopup}"
id="cb4">
<f:attribute value="#{bindings.editroletaskflow.regionModel}"
name="wcRegionModel"/>
<f:attribute value="bindings.saveRoles.execute"
name="wcMethodToExecute"/>
</af:commandButton>
</f:facet>
</af:dialog>
</af:popup>
In the main page, there is a table, I select one row and then click on this commandButton, which launches the popup.
The problem here is that when I launch the popup, there are many rows in the table and hence a scroll bar appears. Scroll down the popup and close the popup.
Again I launch the popup, I see that the popup displays in the same state as it was closed before, i.e the scrollbar is at the bottom and the first row is not displayed.

...also do not forget to:
1. adjust the Active property for the task flow binding (in the pageDef).
Set property value to the true on popupFetchListener, and to the false when closing popup
2. for the af:popup containing region, set childCreation to deffered

Data is not getting displayed in Management Console.

Hi Experts,
I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking "Who's Online" link under WebServer section of management console.
Do I need to do some more settings for getting the records display in Management Console.
Please Advice.
Thanks & Regards,
Rohit

Hi Roberto,
I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
Please Advice.
Thanks & Regards,
Rohit

Data is not getting displayed into a table

Similar Messages

Maybe you are looking for