Data is not Getting refresh in Dashboard

Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
Thanks

QaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David.

Similar Messages

Oracle BI Publisher Report from OEM12c data is not getting refreshed...

Hello,
We've integrated BI Publisher with EM12c. I've developed a report which checks a given database extents information (initial, next, maxextents) at tablespace level. The dataset is chosen as EM repository. The report runs absolutely fine until new data is added to a database. For eg, I created a new tablespace. The new tablespace related info is not getting refreshed despite the fact that I've refreshed the data source and checked that the tablespace exists in the database.
Can anyone pls help.
Thanks,
Dhananjay

Dhananjay,
Has the data in the EM repository view been refreshed? The report retrieves data via the published repository views. If the view does not display the latest information, then you will have to wait till the relevant config or monitoring collections are complete.

Cell data not getting refreshed in which user enters data OO ALV(editable)

Hi Friends,
I am using OO ALV for editable grid display.
I am unable to change grid data in the cell in which user enters something, using OO ALV. Did through debugging of my own program and found that some problem with system program. Then I did all system debugging. Could not find out why is the grid not getting refreshed with the new data in the cell in which user had entered some value. Rest of the cell's data are getting refreshed with the values which i am updating in the final internal table. I can see that the data in the final internal table is changed for the cell in which user enters data. But even after the call of
      CALL METHOD obj_alvgrid1->refresh_table_display
does not refreshes the data in the cell in which user had entered data. Rest of the cells data are getting refreshed.
Piece of code:
SET HANDLER obj_event_receiver->handle_data_changed
                                     FOR obj_alvgrid1.
    METHODS: handle_data_changed
                   FOR EVENT data_changed OF cl_gui_alv_grid
                       IMPORTING er_data_changed
                                 e_onf4
                                 e_onf4_before
                                 e_onf4_after.
METHOD handle_data_changed.
DATA : v_valid    TYPE char1,
         v_refresh TYPE char1.
*--check mt_good_cells semantically
CALL METHOD perform_semantic_checks( er_data_changed ).
*--If PBO is again visited, just refresh the ALV grid.
CALL METHOD obj_alvgrid1->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
ENDMETHOD.
METHOD perform_semantic_checks.
    LOOP AT er_data_changed->mt_good_cells INTO w_good.
      v_index = sy-tabix.
      CASE w_good-fieldname.
        WHEN 'ZASCAS'.
*Now here based on some conditions I am changing my final internal table i_zamtsmatnp
                          MODIFY i_zamtsmatnp FROM w_zamtsmatnp INDEX
                                           w_good-row_id TRANSPORTING
                                             zascas modif.
User enters data in zascas field. Based on the data entered, I am changing other fields which is getting refreshed. I am also changing zascas in the program even after user had already entered the value which was bit wrong and i am correcting it in the program on the even "data_changed" even.
Please help me friends as i m strugling past hours wondering why the data is not getting refreshed for the cell in which user enter data.
Regards,
Surya

Hi Surya,
   The approach you are following is correct. You need to use the comibnation of all these things:
Event - DATA_CHANGED
Methods - CHECK_CHANGED_DATA
             - GET_CHANGED_DATA.
However, here are few standard programs which are having similar functionality.
BCALV_EDIT_03
BCALV_EDIT_07
Check out these once.
Note: If anything is helpful, dont forget to reward points
Thanks,
Adithya K
SAP Practise
[email protected]

CRM Header data not getting refreshed in BADI when clicked in New order

We have used a ORDERADM_H BADI, header badi to populate some custom field values.
Step 1) While creating sales order in CRM(CRMD_ORDER), we are giving inputs such as sold to party , material etc.
Step 2) Before actually saving the order, we found that we dont need this order to be created and again click on create new button in the transaction. In order header BADI, order data for the previous order is not getting refreshed. The previous GUID is still there and function module CRM_ORDER_READ still retrieves the old order values which was cancelled in the previous step. It is causing lot of issues and finally giving dump.
basically the previous GUID is not getting refreshed. Please suggest

Pls send the code that you have in the Badi. Did you actually compare the GUIDs manually ? Instead of CRM_ORDER_READ have you tried using CRM_ORDER_READ_OW ?

Data is not getting posted in ABAP Proxy.

Hi,
I am working on File to ABAPProxy scenario. The data is not going to proxy.
In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
Thanks,
Pragathi.

Hi,
The problem may be
Case 1: Cache is not getting refreshed(Check SXI_CACHE)
Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
Regards,
Sainath

Report is not getting refreshed after changing prompts once again?

HI,
I am running some webi and deski reports using webi sdk also i'm handling the prompts of
report.
Problem is that if i ran the parametrized webi or deski report then my application shows the prompt page
then i fill all the prompt for the report it shows the data for selected prompt values.
But if i once again changed prompt values it shows data of previously selected prompt values not for
the currently changed prompt values. means reports not getting refreshed.
sometimes its work correctly.
What will be problem?
How can i resolve this issues?
Please help me
Thanks in advance
Harshad

The workflow is:
1. Refresh
2. Set Prompts
3. Get View.
then repeat.
Are you refreshing before setting prompts?
Sincerely,
Ted Ueda

Values not getting refreshed in web report.

Hello Friends,
Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
IMS is the combination of all divisions and IMR is the combination of only three divisions.
In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
and using new selection we have restricted the divisions with IMS,IMN,etc.,
IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
IMN... all are with single divisions
Now we have assigned the query in the data provider for select options in hte web report,
But when we select any options the values of the remaining queries are not getting refreshed.
If we use the divisons directly with out using the structures the values are getting refreshed.
Can any one give me the solutions for this?
Regards
Srinivas

Hi Mansi,
Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
If the solution is not related to your question, please provide more details.
Thanks,
Rajesh

Message not getting refreshed in bsp pages.

Hi experts,
An error message which is getting displayed should be removed on leaving the page. I mean the meassage area is not getting refreshed on leaving the page. Everytime i need to refresh the page to remove it. Please help.
Abhi.

hello Friend,
Please clear the internal table / work are used to show message in OnInitialization method of the BSP page.
now It is not getting cleared at the time leaving the page and data stays in memory...
Thanks
K.

DDocType meta filed not getting refreshed

Not sure what could be the cause for this. I added some values for dDocType meta data fleld. The values are not getting refreshed. I restarted the server removed browser cookies but still the doct types I see is old. I checked the database to see if the table is updated with values. The values in the table are correct. What could be the reason for dDocTypes not showing the latest entries?
Regards,
Pratap

This sounds familiar, I think I solved it by just restarting the browser.
Also check that you're not using pre-defined values for your rules.

Toplink Cache not getting refreshed after executing UpdateAllQuery

After executing UpdateAllQuery, the records in the database are getting updated, however the Toplink cache is not getting refreshed with the new data, it still has stale data which is causing issues.
We're also setting
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
Thanks.

Toplink version is 10.1.3.0.0
Here is the code
UpdateAllQuery updateQuery = new UpdateAllQuery(RegisterImpl.class);
updateQuery.setCacheUsage(UpdateAllQuery.INVALIDATE_CACHE);
ExpressionBuilder registerBuilder = updateQuery.getExpressionBuilder();
updateQuery.addArgument("userIdArg");
updateQuery.addArgument("channelArg");
updateQuery.addArgument("tokenArg");
updateQuery.addArgument("dateArg");
updateQuery.addArgument("businessFuncIdArg");
Expression reservedDetailRegExp = registerBuilder.get("reservedDetail");
// build expressions
Expression userIdExp = reservedDetailRegExp.get("userId").equal(
registerBuilder.getParameter("userIdArg"));
Expression channelExp = reservedDetailRegExp.get("channel").equal(
registerBuilder.getParameter("channelArg"));
Expression tokenExp = reservedDetailRegExp.get("token").equal(
registerBuilder.getParameter("tokenArg"));
Expression dateExp = reservedDetailRegExp.get("date").equal(
registerBuilder.getParameter("dateArg"));
Expression busFuncExp = registerBuilder.get("businessFuncId").equal(
registerBuilder.getParameter("businessFuncIdArg"));
// set selection criteria
updateQuery.setSelectionCriteria(userIdExp.and(channelExp.and(tokenExp.and(dateExp
.and(busFuncExp)))));
// substitute the values
updateQuery.addUpdate(reservedDetailRegExp.get("userId"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("channel"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("token"), "");
updateQuery.addUpdate(reservedDetailRegExp.get("date"), "");
updateQuery.addUpdate(registerBuilder.get("businessFuncId"), "");
In the object model for the query, the RegisterImpl has an aggregate mapping (ReservedDetail), which in turn has a number of direct-to-field mappings and an one-to-one mapping to businessFunction (for our query we use a direct query key "businessFuncId")

Materialized View not getting refreshed

Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production
I am having a situation here..there a materialized view named mv_empdept,the base table of this MV is located on a remote database.Therefore the MV creation scripti contains a DB link.
Please find the script below.
Select Deptno,dept_name,empno,ename,DOB,Job
from [email protected];
The refresh mode of this MV is set as FAST,and the refresh cycle is scheduled through Oracle Job.
The job does get triggerd but from the log we found this error.
The error message is:ORA-12008: error in materialized view refresh path
ORA-01461: can bind a LONG value only for insert into a LONG column.
I even checked at the source Db and found that there is no mismatch as far datatype and datalength is concerned.
Strangely when i do a manual Complete refresh of the same MV the data does gets populated in mv_empdept snapshot.
Can anybody explain me the why the data is not getting populated in FAST refresh mode.
Your help is highly appreciated.
---Vineet

Read the following...
http://download.oracle.com/docs/cd/B10500_01/server.920/a96567/repmview.htm
and analyze the restrictions of Fast Refresh in your situation.

ALV tree not getting refreshed

Hi
I have 2 fields A and B in the main screen and a tabstrip with 4 tabs.
Each tab contains a ALV tree
Now when I open the main screen for the first time the ALV tree data is coming properly as per the default values of A and B.
But when I change the values of A or B the ALV tree does not get refreshed. The final table has the changed data but the ALV shows only the old data.
I am doing the ALV tree for the first time in module pool. Please provide some sample code to refresh the ALV tree.
Regards,

Hi
Alv tree is now getting refreshed.The subscreen refresh problem is solved
we have to use REFRESH_TABLE_DISPLAY method to do it.
if tree1 is initial
create object
create container
call method set_table_for_first display
else.
call method refresh_table_display.
endif.
Regards,
Mozila

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

Data is not getting posted to R/3 from CRM

Hi to All,
When i am creating sales order in CRM data is not getting replicated to R/3. System is showing that B Doc is created , posted and validated. But here in CRM system outbound queue is generated but in R/3 there is no data in inbound queue.
Can anybody tell me the reason behind this?
Regards,
Anurag

Hi,
Could you please check the if the Site-R/3 in SMOEAC has the subscription All Business Transactions (MESG)? If not please create a subscription to the R/3 site.
If this doesn't work please update the post.
Hope this helps.
Thanks,
Karuna.

Data is not Getting refresh in Dashboard

Similar Messages

Maybe you are looking for