Data is not loading into the target table in BODS

BODS job is executing successfully but data is not loading.
can anyone please let me know what is the problem
Regards,
Deva

Hi Deva
The Information provided is very limited, what are your Source and Target Databases?
What is the structure of the job design?
If the job completed without error, review the job logs to confirm that rows were indeed processed.
Regards
Charles

Similar Messages

  • Transaction data can be loaded into the Fact table without loading the

    Transaction data can be loaded into the Fact table without loading the corresponding master data (Example : Sales analysis transaction data can be loaded without populating any of its  dimension’s master data)
    a.     True
    b.     False

    Hi Kutti,
    True - You need to select the option in the infopackage - alwyas load even if no master data exists.
    Bye
    Dinesh

  • PSA data change not loaded to the target.

    Hi all,
    We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
    What could be the reason for this behaviour.
    Can experts help.
    Regards,
    M.M

    Dear Mr.Goud/Murali,
    Thank you for your immediate reply and instructions.
    Mr. Goud,
    The PSA QM status is only green but even then the corrected record is not loaded to the target.
    Mr. Murali,
    As per your information we do not have an Error DTP -  i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
    Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
    Kindly clarify.
    Regards,
    M.M

  • Urgent ......data is not  loaded  into  the ODS

    Hi,
    we try to load the data in to ODS via the Infopackage. Job is finished with Green status. In the requests tab I saw that transferred  are 1486 & the addded records are 1486.
    But the ODS sah empty structure,  no records are loaded into the ODS?
    Any suggestions please?
    sailekha

    Hi
    It is availabe for reporting the status is green
    all the related objects are active
    I try to actvate ODS Data, But it asks me the job name
    I am unable to actvate the Data of ODS.
    Still I have the same problem how to proceed further........please let me´know
    Yesterday It is working fine but today I got this problem in Production.
    any suggestions please......
    thanks in advance

  • How to delete the data loaded into MySQL target table using Scripts

    Hi Experts
    I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
    My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
    But in the script i have written the code as
    sql('database','delete from <tablename>');
    but as it is an SQL Query execution it is rising exception for the query.
    How can i delete the data loaded into MySQL Target table using scripts.
    Please guide me for this error
    Thanks in Advance
    PrasannaKumar

    Hi Dirk Venken
    I got the Solution, the mistake i did was the query is not correct regarding MySQL.
    sql('MySQL', 'truncate world.customer_salesfact_details')
    error query
    sql('MySQL', 'delete table world.customer_salesfact_details')
    Thanks for your concern
    PrasannaKumar

  • CDC Error (JOURNALIZED DATA is not loading into tartet database)

    HI,
    I have enabled source database for CDC and got green mark on source database model tables.
    while inserting data into source, J$ tables updating JRN_SUBSCRIBER and other filed.
    when I run the package/ interface JOURNALIZED DATA is not loading into target database.
    i have implemented cdc for 7 source table.
    and using JKM MSSQL Simple
    and enable JOURNALIZED DATA in interface level.
    and
    source database is : MSSQL Server
    Target Database : Oralce 11g.
    please advice me.
    thanks in advance.
    Zakeer Hussain

    Zakeer look into this link , -http://odiexperts.com/?p=1096 . Hope this helps.
    also before running Can you right click on the Source Datastore and click on Journal Data and can you see the data ? and if still the data is not passing through ,in that case make temporary objects t- yes in LKM , IKM and debug and see at which step data is not flowing through and look if there is any filter or condition which is stopping it .
    Still not able to figure out please tell us which step the data is not flowing through we will try to guide you.

  • Incremental load into the Dimension table

    Hi,
    I have the problem in doing the incremental load of the dimension table.Before loading into the dimension table,i would like to check the data in the dimnesion table.
    In my dimension table i have one not null surrogate key and the other null dimension tables.The not null surrogate key, i am populating with the Sequence Generator.
    To do the incremental load i have done the following.
    I made lookup into the dimension table and looked for a key.The key from the lookup table i have passed to the expression operator.In the expression operator i have created one field and hard coded one flag based on the key from the lookup table.I passed this flag to the filter operator and rest of the fields from the source.
    By doing this i am not able to pass the new records to the dimension table.
    Can you please help me.
    I have another question also.
    How do i update one not null key in the fact table.
    Thanks
    Vinay

    Hi Mark,
    Thanks for your help to solve my problem.I thought i share more information by giving the sql.
    I am giving below the 2 sqls, i would like to achieve through OWB.
    Both the following tasks need to be accomplished after loading the fact table.
    task1:
    UPDATE fact_table c
    SET c.dimension_table_key =
    (SELECT nvl(dimension_table.dimension_table_key,0)
    FROM src_dimension_table t,
    dimension_table dimension_table
    WHERE c.ssn = t.ssn(+)
    AND c.date_src_key = to_number(t.date_src(+), '99999999')
    AND c.time_src_key = to_number(substr(t.time_src(+), 1, 4), '99999999')
    AND c.wk_src = to_number(concat(t.wk_src_year(+), concat(t.wk_src_month(+), t.wk_src_day(+))), '99999999')
    AND nvl(t.field1, 'Y') = nvl(dimension_table.field1, 'Y')
    AND nvl(t.field2, 'Y') = nvl(dimension_table.field2, 'Y')
    AND nvl(t.field3, 'Y') = nvl(dimension_table.field3, 'Y')
    AND nvl(t.field4, 'Y') = nvl(dimension_table.field4, 'Y')
    AND nvl(t.field5, 'Y') = nvl(dimension_table.field5, 'Y')
    AND nvl(t.field6, 'Y') = nvl(dimension_table.field6, 'Y')
    AND nvl(t.field7, 'Y') = nvl(dimension_table.field7, 'Y')
    AND nvl(t.field8, 'Y') = nvl(dimension_table.field8, 'Y')
    AND nvl(t.field9, 'Y') = nvl(dimension_table.field9, 'Y')
    WHERE c.dimension_table_key = 0;
    fact table in the above sql is fact_table
    dimesion table in the above sql is dimension_table
    source table for the dimension table is src_dimension_table
    dimension_table_key is a not null key in the fact table
    task2:
    update fact_table cf
    set cf.key_1 =
    (select nvl(max(p.key_1),0) from dimension_table p
         where p.field1 = cf.field1
    and p.source='YY')
    where cf.key_1 = 0;
    fact table in the above sql is fact_table
    dimesion table in the above sql is dimension_table
    key_1 is a not null key in the fact table
    Is it possible to achieve the above tasks through Oracle Warehouse builder(OWB).I created the mappings for loading the dimension table and fact table and they are working fine.But the above two queries i am not able to achieve through OWB.I would be thankful if you can help me out.
    Thanks
    Vinay

  • How do I make Merge operation into the target table case insensitive?

    Hi All,
    We have a target table that has a varchar 2 column called nat_key and a map that copies over data from a source table into the target table.
    Based on wheteher the values in the nat_key column matches between the source and the target, an update or an insert has to be done into the target table.
    Let us say target table T has the following row
    nat_key
    EQUIPMENT
    Now, my source table has the same in a different case
    nat_key
    equipment
    I want these rows to be merged .
    In the OWB map, I have given the property of nat_key column in the target table as 'Match while updating' = 'Yes'. Is there a built in feature in OWB, using which I can make this match as case insensitive?
    Basically, I want to make OWB generate my mapping code as
    if UPPER(target. nat_key)=upper(source.nat_key) then update...else insert.
    Note: There is a workaround with 'Alter Session set nls_sort=binary_ci and nls_comp=linguistic', but this involves calling a pre-mapping operator to set these session parameters.
    Could anyone tell me if there is a simpler way?

    Hi,
    use an expression operator to get nat_key in upper case. Then use this value for the MERGE. Then nat_key will only be stored in upper case in your target table.
    If you have historic data in the target table you have to update nat_key to upper case. This has to be done only once and is not necessary if you start with an empty target table.
    Regards,
    Carsten.

  • Load into single target table frm multiple source table in single interfac

    Hi
    I have four source table and a single target table.
    I need to move data from either of these tables into a target table , and we have to decide the source table based on user input.
    Example :
    Lets say there are four tables A,B,C,D and one target table T.
    If user input says A
    then the data from table A will move to table T
    And again , if the user says table C then data from table C will move to table T.
    And we have to create only one interface for achieving this in oracle Data Integrator ( ODI ).
    You can take assumptions in source and target table.

    Hi ,
    In ODI 11g , there are new feature callled dataset. It allows to use UNION , MINUS etc.
    Google it , you will get many tutorials on Dataset. check the link
    http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/
    In your case , you can provide filter conditions on your tables i.e.
    Say My target table is EMPLOYEE , My source tables are EMPLOYEE and DEPARTMENT
    INSERT INTO EMPLOYEE(CUSTOMER_ID , CUSTOMER_NAME) SELECT CUSTOMER_ID , CUSTOMER_NAME from employee where 'EMPLOYEE' = :EMP
    UNION DEPARTMENT_ID , DEPARTMENT_NAME from departments where 'DEPARTMENT' = :EMP ;
    Just pasted the Screenshots on following page : http://oracoholic.blogspot.in/ . Have a look
    Edited by: user8427112 on Jan 8, 2013 11:04 AM

  • 2LIS_06_INV -  Records not getting into the setup table ..Please help..

    Hello Gurus,
    I am trying to setup 2lis_06_inv but i am not able to understand why i am not able to get any records in the setup table.The job shows finished in few seconds.
    What can be the possible reason for this?
    I activated the datasource using RSA5. I setup the Update Mode to 'Direct Delta' in LBWE ( Extraction Cockpit). I deleted the data in the setup table and then ran the OLI6BW tcode and gave tomorrow's date for finishing the job and then ran the job. The job shows finished in a few seconds but no data gets into the setup tables.
    Error message in log says:
    Recompilation has not selected anything -> Refer to error log
    Message no. MRBW015
    Diagnosis
    This error message was issued for one of the following reasons:
    No documents exist
    No selection criteria were entered
    BW updating has not been activated
    Any help is deeply appreciated.

    Hi,
    Check table RBEX on R/3 side whether any entries exists in that or not.
    if it does not contain any entry it will not bring any data.
    Check the link.
    2LIS_06_INV   Extractor problem
    Regards
    SH

  • Urgent:-Values are not inserted into the custom table

    Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
    In CO
    if (pageContext.getParameter("Continue") != null)
    OAApplicationModule am = pageContext.getRootApplicationModule();
    OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
    am.invokeMethod("initializevo");
    in AM
    public void initializevo()
    CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
    testVo.insertRow(testVo.createRow());
    getTransaction().commit();
    Urgent Help is required.
    Regards,
    Ashish

    Hi Ashish,
    Double check whether you have attached the correct EO based VO attribute to the columns.
    In the Controller
    Process Request use the following code:-
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    if (!pageContext.isFormSubmission())
    am.invokeMethod("initQuery", null);
    ProcessForm Request
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    System.out.println("Inside Process Form Request");
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    if (pageContext.getParameter("submitButton")!=null)
    am.invokeMethod("submit")
    AM Code
    public void initQuery()
    OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
    if (!vvo.isPreparedForExecution())
    vvo.executeQuery();
    Row row = vvo.createRow();
    vvo.insertRow(row);
    row.setNewRowState(Row.STATUS_INITIALIZED);
    public void submit()
    getTransaction().commit();
    Import necessage classes.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Multi-table mapping is not inserting into the primary table first.

    I have an inheritance mapping where the children are mapped to the parent table oids with the "Multi-Table Info" tab.
    One of children is not inserting properly. Its insert is attempting to insert into one of the tables from the "Additional Tables" of "Multi-Table Info" instead of the primary table that it is mapped to.
    The other children insert correctly. This child is not much different from those.
    I looked through the forums, but found nothing similiar.

    I would expect the Children to be inserted into both the primary table and the Additional Table? Is the object in question inserted into the primary table at all? Is the problem that it is being inserted into the Additional Table first? If it is, are the primary key names different? Is it a foreign key relationship?
    If the object in question has no fields in the additional table is it mapped to the additional table? (it should not be)
    Perhaps providing the deployment XML will help determine the problem,
    --Gordon                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Date is not inserted in the DB table

    Hi,
         I have a view, showing some data, including date and I have a save button. View has some of the fields update able. When I click the save button a bean function is called which run the query to update values in the DB table, taking those values from the view.
         Now the problem is, date is not updated as the query doesn't run just  because of the date and I am getting this error:
    ORA-01861: literal does not match format string
    and the date format is: 2013-09-23
    I have tried using to_date() method, but it didn't work for me.
    Here is my query:
                oracle.jbo.domain.Date  Pshipdate =( oracle.jbo.domain.Date) rowSelected.getAttribute("Pshipdate");
                    "UPDATE SHIPEXT" +
                    " SET APP = " +
                    "'" + status + "' " +
              ", PSHDAT = " + "to_date('" + Pshipdate + "', 'dd/mm/yyyy')"
                    +  ", MBY = " +
                    "'" + LoggedInUser + "'"
                    + ", IP = " +
                    "'" + IP + "'"
                    + ", DSREMS = " +
                    "'" + descrems + "'" +
                    ",  MDAT  = "
                    + "to_date('" + getCurrentTimeStamp() + "', 'dd/mm/yyyy')" +
                    " Where WO =" +
                    "' " + workorder + "'"
                    + "AND SR = " +
                    "'" + sr + "'"

    I'll repost what you branched off
    There's all kinds of things wrong.
    For a start, I can't see P_shipdate anywhere, though I can see Pshipdate.
    If you mean Pshipdate, Java is converting it to a string which you are then converting back to a date with to_date.
    Check that the default print  string returned is of dd/mm/yyyy format.
    Similarly with MDAT and getCurrentTimestamp - what is default print string of geCurrentTimestamp?
    All these problem could be avoided if you use bind variables.
    We are trying to help but you seem determined not to accept any help.
    Have you checked the print string formats of Pshipdate and getCurrentTimestamp?

  • Data is not Loading into Active data table on DSO in BI 7.0

    Hi,
    Iam loading data from a flat file to ODS in BI 7.0, the data is loading up to PSA and New data table , But the DSO is not activating, after all possible steps like, automatically setting/ manualy doing  /  through Process Chain....still unable to do it....Cud u pls tell the reason and solution.

    Hi Sri,
    Did you get any solution for this issue. Your input is highly appreciated.
    We are also running on the same boat, I am using the End-Routine to fill up the 2 fields (one is Key figure and Characteristics) from one DSO to the other. In my case along with all other fields this key figure is also populating before and after the Activation of DSO. But the new Characteristics is populating in the update table (/BIC/A***40) before activating the DSO, once I activated the DSO the new characteristics is not filling up in the (/BIC/A***00), rest are coming without issues.
    I built the same logic for other current data DSO (write optimized) from other DSO to fill the same fields with the similar logic in the end routine, it is up and running without any issues.
    Thanks,
    Dileep

  • How to Down load Data in Application server into the Internal Table

    hi freinds,
    iam having a file in the application server.
    now i need to send the data in the file to the internal table.
    is there any Function Module?
    i need with out using the OPEN DATA SET and CLOSE DATA SET Keywords.
    is there any possible?
    Regard's,
    Ranjith.

    Hi,
    There is no other option for uploading the data from the application server to the internal table without using OPEN DATASET and CLOSE DATASET. Even if you find the FM internal logic in FM uses these keywords to read the data from Application server.

Maybe you are looking for