Data load erroring out but giving a completed status

Hello Everyone,
We are on BPC 5.1 SP3. We have our data imported daily on a schedule. The actuals import without any errors or problems. But our Budget/Forecast file is not importing correctly. We have it set to run each day at 5:30 am. The files are placed on the server and the scheduled job grabs the files imports them with the conversion and transformation files. It has been running successfully for months. Now all of a sudden they stopped working correctly. When you select View Status to see what happened. The package says it's completed but if you click on details. It shows that the data conversion on step 2 failed. Since it doesn't say failed we don't get a reject list or anything that we can use to troubleshoot why it's failing. Both the actual and forecast files use the same transformation and conversion files. I have revalidated the transformation and conversion files with both the data files and didn't get any errors or kickouts with the data files. So I am at a loss as to what would be causing the failure for one data file but not the other.
I forgot to add that when we run the import package manually with the forecast data file it runs successfully.
Any help would be greatly appreciated.
Thanks,
Eleasha
Edited by: Eleasha Counts on Aug 4, 2009 10:33 PM

Hi,
Ok I thought you are not using standard package.
In this case you really have to check your conversion and transformation files.
Also I suggest to try to use first a file with just online which normally should work and try to import that one.
If that's working then coversion and transformation file are fine you have to check the format of your input file.
Probably you have a TAB char instead of blank char or things like that.
Regards
Sorin Radulescu

Similar Messages

Data Load error Please respond ASAP

Hi ,
When i am trying to load data for year 07 using rule files its showing an error and aborting the data load
Error Msg " Data Value [2007] Encountered before all dimensions Selected,[5] Records Completed"
Any help greatly appreciated.
Thanks

Key here is that 5 records were loaded before failing on the 6th, indicating it's not a header issue on the load rule.
Check the first 5 records and see how the column containing 2007 differs between them and the failing 6th record. Perhaps the 6th record has a null (as indicated eariler) or prehaps 2007 is not the name of the member in the outline.
I have had both issues give similar error results.
J

Data load error regarding timestamp

Hi All,
I am getting data load error related to time.
I am using 2lis_02_SCN for CNFTM(time stamp) filed
with value "08:00:" need to convert to 08:00:00...for some records and rest of the records are coming with normal 6 digit time.
please send your suggestion as early as possible.
Thanks
Rupa

Hi Rupa,
Try out following sample code inthe transfer rule for the same info object and it should work
lv_len = strlen( str ).
if lv_len = 4.
concatenate str '00' into str.
endif
Regards
Kapadia

Sap bw 7.3 master data load error

sap bw 7.3 master data load error
erroe: Exception in Substep Rules

Hi Jayram,
I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
1. Duplicate records
PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
2. Erroneous records.
Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
Hope it helps!
Regards,
Pavan

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

Data Loading Error : ToomanyError records.

Hi All,
I got Data Loading error when I am loading from Flat File.
Following is the error message :
Too many error records - update terminated
Error 18 in the update
No SID Found for value '00111805' of Characterstic ZUNIQUEID (Message No 70)
can anybody help in resolving the issue.
Regards,
Chakravarthy

hi
Check the format of your charecteristics and key figures .
Check you put data separators in you flat files approriately
In the particular charecteristics ZUNIQUEID ,ensure data is consistent...check the related tables
Assign points if useful
Regards
N Ganesh

Common data load errors in BI 7

Hi , i would appreciate if any one can provide me a list with most common Data load errors effecting both master and transactional data in SAP BI 7 or BW 3.5..

Hi AAL,
There're lots of loading error posts in this forum. This one I guess is good for you:
production support errors
production support issues
Or you can search yourself using key word common load error etc.
Hope above helps.
Regards,
Frank

Data load error--urgent

hi friends ,
we are geting data load error as; Process 000087 for deterermined fro infoobject DUVTYPE started in STATUS TAB and in DETAILS TAB update(251new/160 chnaged): Errors occured.
what should i know from information and what are the reasons for this load failure and possible rectification methods.
This load is through process chains and aslo a delta load.
Can i delete the request and start the infopackage manually? also will it make my Process chain Green automatically or should i repeat from the subsequent process?
Plz help.
I award points.
regards,
siddartha

Hi siddharta,
look in the details of the monitor to see the error. Be very cautious with deltas! They can not be repeated every time. it depends on the datasource! What you can do is delete the failed request from all(!) the data targets meanwhile!
Regards,
Jzergen

Data Load Error after Client copy on Source System

We did a client copy to our QAS source system. After that was complete, I tried to do a couple of full data loads. But they fail. The only errors I see are on the source system when I try to manual update the Idocs. They are:
EDI: Partner Profile not available
Entry in inbound table not found
Is there a step I need to take after the client copy and before the loads? I have a feeling that I'm forgeting something.
Thanks,
Chris

Hi Chris,
Check the following.
1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
If your answer is no for <1> then perform all the steps.
Hope this will help you.
Suneel

Data Load with warnings, but dataload.err empty

Hi guys,
laoding data on EAS Console for a Essbase database gives below message:
Database has been cleared before loading.
dataload.err is EMPTY.
Any ideas??
Some data is loaded but how can I find out where it stopped or is all my data loaded?
Message:
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Transaction [ 0x190004( 0x4fd89600.0x64578 ) ] aborted due to status [1003050].
There were errors, look in H:\My Documents\temp\dataload.err
Database import completed ['AXN_Sim'.'BewMod']
Output columns prepared: [0]
Thanks Bernd

Hi,
There is nothing much you can say whether the data is completely loaded or not. You have to check by yourself on that.
Since the loading was aborted with a warning, it could be a network issue..
Try to load a small file and then check whether you are facing the problem or you coulfd also post your finding on that..
Thanks,
CM

HFM - Ownership Data Load error

Hi All,
I am running in to errors when trying to load ownership data for the year 2014 using load tasks under Tasks Folder. I made sure the file has the right format of data with all the dimensions included and I checked the File contains the ownership data tab. I tried loading using both merge and replace options but looks like it does not work.
The data gets scanned with no errors but when I try to load it, it shows 25% processed and status as completed which is weird and when I try to extract it, it gives zero records..
I was able to successfully extract and load ownership data for the current and previous years with out issues..
Are there any flags that I need to make sure to open in order to load the ownership data for future years? I tried opending the periods and the year for which I am loading the data but it does not work.
Please help!!
Thanks a lot!!

Hi Thanos,
Thanks for the reply!!
Yes, I tried extracting some ownership data for the years 2013 and 2012 and I was successful in loading the data back.
I extracted the 2013 ownership data updated the year to 2014 and month to Jan and try to load it back then I am getting these errors.. same with for year 2015 and future years..
The format of the load file looks correct as I was able to load for previous years with the updated ownership data with no errors..
I killed the HFM process on the app server and tried to load it back but still could not succeed.
Any suggestions.. please help...
Thanks again!!

Data load Error to Planning

Hi All,
I have created One Interface for loading data to Planning Application i have make the Account Dimension as Load dimension and Segment as Driver dimension (member is Audio)
I have created one form for this now when i am running the interface its get successfully executed but at report statics it showing following problem
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 2, in ?
Planning Writer Load Summary:
     Number of rows successfully processed: 0
     Number of rows rejected: 48
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)
I have find out a log file for it which says :
Account,Data Load Cube Name,MP3,Point-of-View,Error_Reason
Max Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Avg Hits Per Day,Consol,Jan,"USD,Cannot load dimension member, error message is: java.lang.IllegalArgumentException: Unbalanced double quotes found at character 3 in the member list: "USD
Can any buddy tell me what i did wrong. My Data file not contains any Double Quote mark with USD the POV is like this :---> USD,E01_0 ,Jan,Current,Working,FY11
Thanks
Gourav Atalkar
Edited by: Gourav Atalkar(ELT) on May 3, 2011 4:06 AM

As it is comma separated and all the members for the POV need to be together try enclosing it in quotes e.g "USD,E01_0 ,Jan,Current,Working,FY11"
Cheers
John
http://john-goodwin.blogspot.com/

Master data load error

Hi I am getting following error while executing the DTP:
0MATERIAL : Data record 84 ('1-80200-01 '): Version '1-80200-01 ' is not valid. I know its because of space and I can correct it in PSA. But its loaded daily as full load and I dont want to change it manually daily. Why is it erroring out for space when space is allowed character ? what could be the solution ?

Hi Sridhar
Contact your R/3 team to edit this particular record in the base tables .
As you said its a fulll load from then on words it wont give this error.
The reason might be non displaying charcter..
Hope its clear a little..!
Thanks
(P159793)K M R
Assigning points is the only way of saying thanks in SDN
>
Sridhar Jallepalle wrote:
> Heres i sthe error msg i am getting rsdmd 194

Data Load Error - Unknown Item

Under the advisement of an Oracle engineer our users were instructed to export the data from one of their DBs using "Level 0 Data", and then import the data back into the database. This process was needed in order to allow us to restore compression on our DBs as it had been lost during a patching process.
In any event,
I've exported the data to a .txt file and now I am attempting to load the file back into the database. I am receiving the below error:
Parallel dataload Enabled: [1] block prepare threads, [1] block write threads.
Unknown Item[-1. #IND] in Data Load, [360639] Records Completed.
Unexpected Essbase error 1003000
I did some searching on the web and located a discussion topic dealing with this type of an error. Id indicated that the error was related to an attempt to write a value to the DB that does not have a corresponding "table" in the DB. I 'kind of see' that from the error message, but I don’t understand how it could be occurring if the data export and import are occurring on the exact same application DB.
Any assistance would be greatly appreciated.
Thanks!

It is a planning database, if so log on my oracle support and have a read of -
Error "1003000 Unknown Item [1.#QNAN] or [-1.#IND] in Data Load, [xxxx] Records Completed" [ID 961934.1]
Even if it is not there is invalid data that has been exported.
Cheers
John
http://john-goodwin.blogspot.com/

Data load erroring out but giving a completed status

Similar Messages

Maybe you are looking for