Data load from ODS to

A basic question, I am working on a BI7 system but using the 3.5 BC objects for loading purchasing data.
data source 2LIS_02_ITM
-> Transfer rule
-> infosource
    -> update rule
      -> 0PUR_O01
       -> update rule
         -> 0PUR_O02
from the info package when i schedule the load immidiately (init with data) the data is successfuly loaded into the first ODS 0PUR_O01 but dosen't load into the second ODS 0PUR_O02
How to do this?

Hello Ramesh,
I have some questions on this activation and loading of this DSO.
1.We are using 7.0 do u still need to use 3.5 Info source/Update/transfer rules?
2.If I only need to activate 0PUR_O01 DSO, and only data coming from one 2lis_02_itm what are my options
3.When you activate the Business Content objects "In Data Flow before" How did you deal with Transformations/Transfer & Update rules did u get them from Business content or you have to create them your own.
4.I hope you are using LO Cockpit.
Appreciate your Help.
Thanks
Jagadish

Similar Messages

Summing up key figure in Cube - data load from ODS

Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field   quantity
123                301          10
123                302           20
123                303           30
Expected record in Cube
Header-field       Quantity
   123                    60
====================
Regards,
Pramod.

Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod.

Direct vs Indirect data load from ODS - InfoCube

We know that there are two options to load data from ODS to InfoCube:
1. Direct load:
If the ODS setting is checked with the option of "Update data targets from ODS object automatically", then when loading data to ODS, then the data also can be loaded to the InfoCube, in this way, only one InfoPackage is needed to load data to the ODS, then the InfoCube can be filled with data automatically.
2. Indirect load:
If the ODS setting is NOT checked with the option of "Update data targets from ODS object automatically", then not only the InfoPackage to load the data to the ODS is needed, but also the InfoPackage to load data from the exported datasource of the ODS to the InfoCube is needed to be created in order to load the data from ODS to the InfoCube.
I wonder what are the pro and con between the above two loading methods from ODS to InfoCube.
Welcome to every BW expert inputs!

HI Kevin,
Direct Loads or rather Automated Loads are usually used where u need to load data automatically into the final data target. And it has no dependencies.This process has less of maintenance involved and u need to execute a single infopackage to send data to the final data target.
But Indirect Loads are usually used when u have a number of dependencies and this ODs object is one of the object in a process chain. So if u require the this ODS data load wait till some other event has been executed , then indirect loads are used through process chains.
Regards,
JAsprit

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

Debugging data load from ODS to InfoCube?

Hi Expert,
I got some errors when I load data from ODS to Cube. I tried to simulate the load, but I got No data in PSA table. I checked mt Infopakage, it is only update Datatarget directly. How can I debug in this situation. I have only that choice "Data Target only" How can I select update Cube through PSA? Thanks in advance!
Weidong

Hi robert,
Thanks for your reply! Do I have to delete the old one? It looks like that system generated two Infopackages - One is full update and another one is Initial update. I think that I have to delete both of them and re-created both, right? Thanks a lot!
Weidong

Data loading from ODS toODS

Hi All,
Iam having one source ODS and target also ODS.Can u explain when we have to go for
1. Full Repair.
2.Full Load.
3. Delta Load.
and also pls give the procedure for loading for all the three above said scenarios.
Points will be awarded suitably for the answers.
Thanks in advance gurus.
Regards...
BW World

Hi,
For loading from one ODS to another you use export datasource. Its called a datamart load.
Full load is generally performed once to load all the historical data.
After that you do an init load and deltas will follow which will load only the changed or new records frequently.
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
You need to create an export datasource (8<Source ODS>) and the update rules from Source ODS to target ODS for loading.
Also InfoPackages for Init, Full/Full repair and Delta loads.
Loading procedure had been discussed previously in SDN.
You will get detailed info in SDN.
Thanks,
JituK

Data loads from ODS TO CUBE

Hi,
   i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
sp

Hi Srinivas,
        check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
         Do a Init load and then do the delta load.
hope this will help.

No data loaded from ODS to Cube

Hi,
I am trying to do init with data transfer from 0FIAP_O03 to 0FIAP_C03...
though there is data in the ODS, nothing is loaded to the cube. It just says
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Any suggestions?
Thanks
Shalini

Hi
"Info IDoc received with status 8" implies that there is no data in the source.
But as you say, that data is there in the source(ODS), then there is some inconsistency in the data source and you need to replicate the data source and reactivate that.
IDoc Status 8 signifies that there is no data in the source and its not any error.
For more info on idocs check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
Also goto sm58 and clear the idoc there.
Hope this helps
Regards
Shilpa

Data load from ods to ods

Hi All,
I have loaded data from ods1 to ods2...its a delta update.
In ods2 the request has failed due to short dump. I deleted the request in ods2 hoping to reconstruct it. But i couldn't find the request in reconstruction tab.
I tried to run the infopack but its not taking the delta.
Please help me out...its urgent
Thanks & Regards
AP

hi,
Reconstruct will only work incase you use pas for loading. By default ods to ods does not have PSA, that is why you cannot reconstruct. your option is to either delete all data in ODS2 and init from ODS1 or reset datamart status in ODS1 and then run normal delta for ods2.
Award points if helpful
Sachin

Data Load from ODS to Infocube

Hi All,
I have been trying to load Data from Standard ODS (activated from Business Content) to InfoCube (activated from Business Content). The records are present in ODS and it has been activated. However, when the load was scheduled and run for the Infocube, the data did not show up in the "Infocube" content and "Fact Table" as well. When I looked at Infocube->Manage->Requests, it showed transferred records as 21 (same as shown in the "monitor" of the existing request) and added records as 0. Similarly for other requests in the cube, it showed the same way. The only difference was the number of records (eg 178 or 48, etc). The number of entries for Fact table was 0 and the it is not compressed. The cube name is 0BBP_C02. Can any of you come up with an idea towards the solution to this problem.
Thanks

Hi Saura,
Check start routines in the cube URs.
For example, in my system for 0BBP_SC ODS object as infosource I see the start routine:
LOOP AT DATA_PACKAGE.
    IF NOT ( DATA_PACKAGE-BBP_RELSC = 'I1129'
*    if shopping cart is approved
      AND DATA_PACKAGE-BBP_ORIGIN = 'B' ).
* and record originates in BBP
      DELETE DATA_PACKAGE.
    ENDIF.
ENDLOOP.
As you can see, records not conforming some conditions are deleted.
The similiar routines you can find in another URs.
Best regards,
Eugene

We have some data loads from ODS to Cube (Deltas)

Dear Experts,
We can see request status green in DSO but in cube it is in yellow and not available for reporting (the request got compressed)
I want to make the status to green and available for reporting but i could'nt do it as i can see some popup message saying the request is already activated and change QM status not possible.
when i run the delta again that also becomes yellow status due to the previous request's was in yello status.
please suggest me how to change the status of compressed request and why it is happening.
Thank you in advance,
Kiran.

Hi,
Chk whether automatic request processing--->Set quality status Ok checked or not?
It might be in manage of cube, in the menu-->goto options somewhere
as I was not before the system ...I couln't guide u exactly...
rgds,
Edited by: Krishna Rao on Mar 30, 2010 3:47 PM

Loading from ODS to Master data Object

Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishna

Hi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
 We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
 The following is from the Short Dump (ST22):
 The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
 MAXSIZE (in KB) : 20,000
 Frequency : 10
 Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
 clear DATA_PACKAGE.
 loop at DATA_PACKAGE.
 select single /BIC/ZMATERIAL PLANT
 into (material, plant)
 from /BIC/AZCPR_O0400
 where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
 and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
 if sy-subrc = 0.
 DATA_PACKAGE-/BIC/ZMATERIAL = material.
 DATA_PACKAGE-plant = plant.
 modify DATA_PACKAGE.
 commit work.
 endif.
 select single CPR_ROLE into (role_assignment)
 from /BIC/AZCPR_O0100
 where CPR_GUID = DATA_PACKAGE-CPR_GUID.
 if sy-subrc = 0.
 select single CPR_BPARTN into (resource)
 from /BIC/AZCPR_O0200
 where CPR_ROLE = role_assignment
 and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
 if sy-subrc = 0.
 DATA_PACKAGE-CPR_ROLE = role_assignment.
 DATA_PACKAGE-/BIC/ZRESOURCE = resource.
 modify DATA_PACKAGE.
 commit work.
 endif.
 endif.
 clear DATA_PACKAGE.
 endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Thanks,
Venkat.

Error on activation of data records from ODS object

hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated" and "Activation of data
records from ODS object ZPUR_O01 terminated"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated"
Please help me with this problem.

Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull

Error when loading from ODS to Cube

Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.

Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
        voodi

Data load from ODS to

Similar Messages

Maybe you are looking for