Data Load in BI7.0

Hello Gurus,
I am new to SAP. I want to load data into BI 7.0 from a source system but I dont want to use PSA. Could you please let me know how it can be done.
Thanks in advance.

Hello,
This depents on the Setup.
DTP & Transformation -> You have to use the PSA then you can Load the data to Data Target.
Update Rules & Transfer Rules -> You can directly load the data to Data target without using PSA,
Thanks
Geeta

Similar Messages

Data load in BI7 for an single infoobject

Hi
I had added a new info object (PO number) in ODS and mapped to the corresponding R/3 field (BSTNK). Now i want to load data only to the newly added field (PO number) in BW from R/3 with out deleting the existing data. I came to know it is possible in BI7 can someone help me with the steps please.
Thanks a lot
Sheetal

<u>it is possible even earlier versions as well provided that no key figure mapped to Addition Update Method</u>.
If any KF has Update Method "addition"...we have these 2 options ... even for BI 7.0.
1. you need to drop the Data and reload entire data.
2. create a custom extractor to load only this field.
If no KF set to Addition, Just reload entire data with existing DS.
Remodeling workbench in BI 7.0, we can't work with DSO. it's not supported for current Release we have. Planed for future release... don't have idea whether we can achive this or not!
Nagesh Ganisetti.
Assign points if it helps.

Problem in Flat file transaction data loading to BI7

Hi Experts,
I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold.
Flat file fields are:
Cust id SrepID Mat ID Price per unit Unit measure Quantity TR. Date
cu100 dr01 mat01 50 CS 5 19991001
created info objects are
IO_CUID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
When i created IO_QTY, unit/curency was given as 0UNIT. In creation of DS, under fields tab, extra field CS was shown I did confuse to which object should i map it. and at the same time when i enter IO_QTY its prompting one dailogbox with 0UNIT, so i said ok. Now i can't map CS to unit as system created automatic ally 0UNIT when i enter IO_QTY. Could you please give me solution for this and procedure to enter formulae for calculating Sales revenue at this level instead of query level. Your solutions will be more appreciated with points.
Await for ur solutions
Thanks
Shrinu

Hi Sunil,
Thanks for your quick response. I tried to assign the infoobjects under the fields tab in creation of DS. I have not reached to data target yet.
Could you please answer to my total question.
Will you be able to send some screen shots to my email id [email protected]
Thanks
Shri

Data loading in BI7.0

Hi SDNers,
In BI 7.0, how the Data is loading (Request wise) from PSA to further datatargets through DTP when loading Full Update and Delta Update.
Please give clear idea on this
Thanks,
Satya

Hi,
Please check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
-Vikram

Data load from ECC6 Unicode to BI7 MDMP

Hello Contributors,
We are upgrading R3 system to ECC6 Unicode but BI7 is still MDMP system. I'm testing data load and there are some errors related with unicode conversion.
ECC has multiple langusges like English, Korean, Chinese etc...
BI7 MDMP has English and Korean.
Error1 : Korean characters are broken in 0CUSTOMER_TEXT.
   As you know customer name doesn't have language code in R3 and Korean text are being used for Korean customers. After loading the data, English characters are okay but Korean characters are broken and displayed as #
Error2 : Values of fields are merged each other if there is Korean characters in 0CUST_SALES_ATTR.
   We have Korean characters in some of attributes of 0CUST_SALES. So if a record has Korean characters in one of the field then the following fields are merged each other. But if there is no Korean characters then it is loaded correctly.
For an example;
Values of R3 extractor
    Cust#      Name               Field1          Field2     Field3
    1234     Korean Text               ABCD          EFGH     JKLM
    3456     English Text               OPQR          STUV     WXYZ
Values of PSA table after loading
    Cust#      Name               Field1          Field2     Field3
    1234     Korean Text AB     CDEF          GHJK     LM
    3456     English Text              OPQR          STUV     WXYZ
(*if there are Korean characters then the following fields are divided and a part is updated in to the previous field)
Please help me if you have any ideas to resolve this issues.
Best Regards
HD Sung.

Convert your BI system to Unicode. MDMP is not supported in this scenario, as you have found.

Data Load performance in BI7.0

Hi,
I have a generic question regarding BI7.0.
From the perspective of data load performance what are the features that BI7.0 has compared to earlier versions.
Thanks in advance,,
Rama Murthy

Hi,
In BI, the entry layer is PSA, and it is mandatory to maintain the PSA to maintain the data in BI from any source. Here(in BI) it is possible to make the PSA as typed and untyped.
The Infopackage functionality is reduced, it will loads data up to PSA only.
The DTP upload the data between BI object in BI. Transformations replaces the updates rules and transfer rules.
DTP and Transformations removes the Data mart interface between the BI objects.
It is possible that, if no transformation of data is required, we can load data directly to target without maintaining the InfoSource.
All these properties are available bcoz of the new concept and new object type DataSource ie., BI DataSource (object type RSDS).
Depending on the situation, the InfoSource is not mandatory and at some times it is mandatory but PSA is mandatory in BI and rest of all are same as in 3.x.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Data loading after field enhancement.

Dear all,
We are using BI7.00 and in one of our data source, a new field has to be enabled. Our people are under the impression that without downtime, the previous data which is available in the Target and the PSA can have values for the new field also.
I could not perceive the possibility. Experts suggestion required in this regard. Can you kindly provide answers for the following questions.
1) Can enhancement be done to the data source without deletion of setup table?
2) Can the delta queue be as it is without stopping the delta pull process i.e., the process chain and the background jobs.
3) If the field is enhanced, can the value of the field be loaded to all the data which is previously loaded to the PSA and the Target.
Request Experts to provide apt solution so that field enhancement can take place without disturbing any of the data loads.
I went through the forum posts and was able to find something about export data source and Loop back principles - these suggests that my requirement is possible.
I do not know the process. Can experts provide step by step suggestion to my query.
Regards,
M.M

Hello Magesh,
1)Enhancement cannot be done if there are records in the set up tables.
2)When an enhancement is done...delta queue also needs to be empty...so you will have to stop the collective running jobs...lock the system and empty the delta queue by scheduling the delta package twice....then only the transports to production will go succesful.
3)Until you fill the set up tables again and do a historial loads...the old values for the new added field will not appear..
If you just do an init without data transfer and schedule new delta loads...then the new added fields will contain values from that day and changes to them...previously loaded values to BW will remain as it is...to have the values for newly added fields you need to load the history through full repair loads by filling the set up tables first.
Follow the following steps to load only the new values for the added fields
1)Lock the system
2)schedule the collective update job through job control so that all the records are in the delta queue and no records or LUW are left in LBWQ for that data source.
3)Schedule the delta infopackage twice so that even the queue for repeat delta is also empty.
4) do the transports and then delete the old init and do a new init without data transfer.
5)schedule the normal delta.
To have history for the added fields
1)Lock the system and
2)Delete the old init and clear the LBWQ from LUW's
3)Do the transports
3)Fill the set up tables and do init without data transfer for the data source.
4)Unlock the system
5)Do the full repair loads to the BW data targets
6)Schedule the delta loads.
Thanks
Ajeet

Data load for target after target enhancement

Dear all,
We are using BI7.00 and in one of our design we have the data first loaded to the ODS and then to the Cube. Now we wanted to get the value of one more field. This field is already avaialable in the data source and data is flowing upto PSA. I have added that field in the ODS. My problem starts here. I want the data to flow for all the previous requests i.e., earlier requests in the ODS and the Cube (Prior to enhancement) without disturbing the data load.
Kindly provide the step by step instructions. I do not want the earlier data to be deleted. The current field value to be updated to the previous loads to the ODS and the Cube.
Regards,
M.M

Hi,
Overwrite optrion is available in the update mode of key figures.
Its key figure which determines whether the DSO is in overwrite or addition mode.
Go to the mappings of each infoobject in the tranformation from the data source to DSO and check the mapping type of each key figure and then see if its overwrite or not??
To avoide reloading to the cube.....One of the option is to add the fields in both cubes and DSO and then activate the transformation and mappings,DTP ect.
After that load the data to the DSO and then schedule the delta from the DSO to the cube.Thi will bring all the chnages to the DSO in the cube.
But this delta may be a huge one and may fail depending upon the data in the DSO.
But you can try for this and if it is not working then you may have to delete the cube and reload it.
Thanks
Ajeet

What are the CRM Trasaction data Data Sources and Data load Procedure

Hi BI Gurus,
Does anybody provide the CRM Transaction data DataSources names and Load procedure into BI7.0
I know the master Data load procedure from CRM to BI7.0.
if you provide Step-by-Step documents it is more help.
Thanks in Advance,
Venkat

Hi Venkat
In order to find the transactions want you can login the CRM system and then use the transaction RSA6. There you can expand all the subtrees by left clicking on the first line and then clicking expand the further left button. After that you can easily search any datasource you may want
Hope that helps
Rgds
John

Data Load to BI (7.0 SP 9) from R3(ECC 6.0 SP-Basis 9)

Dear All,
We have new instance of Devlopment BW System with version 7.0 and R/3 upgraded to ECC6.0. We connected the source system. When we extract the data through DTP the data load is sucessful with 0 Records.
This is case with all the extractors.
The data base is on Oracle 10.2
Observations for this:
0) Source system connection check OK.
1) When I test in RSA3 for the same extract I could fetch some data there.
2) I could transfer the global setting
3) I could not see any of the iDoc generated in BW and received in R/3
4) No back ground job is generated in R/3 in SM37
5) I could extract the data from other Source System(SEM) instance based on 3.5 technology.
As a progress on this issue I could load the load sucessfully by 3.X methodolgy (Using update rules) but not by BI7.0 Methodology(Using Transformation).
As a standards by the client we have to use 7.0 Methodology so still need to find a solution for the same.
No clue on how to solve and what is going on wrong. Help me in solve this issue.
Thanks in Advance,
PV
Message was edited by:
USERPV

I am not sure if you have followed all the necessary steps to do a data load to the infocube. I also wish I had more information about your system and the error message you are getting. A data load can fail due to a variety of reasons -- depending on the BW version, system settings and the procedure you followed. Please use the data load monitor transaction rsmo, identify the error message and take the necessary action.
if it may be useful reward point are appreciated

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

Data load taking very long time between cube to cube

Hi
In our system the data loading is taking very long time between cube to cube using DTP in BI7.0,
the maximum time consumption is happening at start of extraction step only, can anybody help in decreasing the start of extraction timing please
Thanks
Kiran

Kindly little bit Elaborate your issue, Like how is mapping between two cubes, Is it One to one mapping or any Routine is there in Transformation. Any Filter/ Routine in DTP. Also before loading data to Cube did you deleted Inedxes?
Regards,
Sushant

Data load process for FI module

Dear all,
We are using BI7.00 and in one of our FI data source 0EC_PCA_1 we had data load failure, the cause for the failure was analysed and we did the following
1) deleted the data from cube and the PSA
2) reloaded (full load) data - without disturbing the init.
This solved our problem. Now when the data reconciliation is done we find that there are doubled entries for some of the G/L codes.
I have a doubt here.
Since there is no setup table for FI transactions (correct me if i am wrong), the full load had taken the data which was also present in the delta queue and subsequently the delta load had also loaded the same data
(some g/l which was available as delta).
Kindly provide the funtioning of FI data loads. Should we go for a Down time and how FI data loads works without setup tables.
Can experts provided valuable solution for addressing this problem. Can anyone provide step by step process that has to be adopted to solve this problem permenantly.
Regards,
M.M

Hi Magesh,
The FI datasources do not involve Setup tables while performing full loads and they do not involve outbound queue during delta loads.
Full load happens directly from your datasource view to BI and delta is captured in the delta queue.
Yes you are right in saying that when you did a full load some of the values were pulled that were also present in the delta queue. Hence you have double loads.
You need to completely reinitialise as the full load process is disturbed. Taking a down time depends on how frequent the transactions are happening.
You need to.
1. Completely delete the data in BW including the initialisation.
2. Take a down time if necessary.
3. Reintialise the whole datasource from scratch.
Regards,
Pramod

Number of parallel process definition during data load from R/3 to BI

Dear Friends,
We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI. I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
3) How system works and what will be net result of increasing or decreasing the number of parallel process.
Expecting Experts help.
Regards,
M.M

Dear Des Gallagher,
Thank you very much for the useful information provided. The following was my observation.
From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
Can you kindly explain about the above mentioned point. i.e.,
1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained -> can you explain in detail
Can you calrify my doubt and provide solution?
Regards,
M.M

Data Load in BI7.0

Similar Messages

Maybe you are looking for