Data load in BI7 for an single infoobject

Hi
I had added a new info object (PO number) in ODS and mapped to the corresponding R/3 field (BSTNK). Now i want to load data only to the newly added field (PO number) in BW from R/3 with out deleting the existing data. I came to know it is possible in BI7 can someone help me with the steps please.
Thanks a lot
Sheetal

<u>it is possible even earlier versions as well provided that no key figure mapped to Addition Update Method</u>.
If any KF has Update Method "addition"...we have these 2 options ... even for BI 7.0.
1. you need to drop the Data and reload entire data.
2. create a custom extractor to load only this field.
If no KF set to Addition, Just reload entire data with existing DS.
Remodeling workbench in BI 7.0, we can't work with DSO. it's not supported for current Release we have. Planed for future release... don't have idea whether we can achive this or not!
Nagesh Ganisetti.
Assign points if it helps.

Similar Messages

Master data Reorganization Process for a single InfoObject

Hallo Experts,
mayby someone else had this problem bevor us?
SAP-BWProducion: Master data Reorganization Process for a single InfoObject (selfmade), other InfoObjects worked fine.
SAP BW 7.0 SP20 or 21
This element has daily attributes and the Q-Table has actual 180Mio entries. We startet reorganisation with 250Mio. entries.
Because of the daily loading, we cancel the batchprocess in the evening and started it again in the morning. This was fine for about 5 days. We elliminate 80Mio entries.
Our destination would be 80Mio entries left.
Whenever we run this feature now - in a process chain - no entries were deleted after 30 hours working, and there were no counting-stastics in SM50
     Sequentielles Lesen
     Insert
     Update
     Delete
The five days before, we saw Mio's of entries in this statistics.
We have checked the Q-table and there exist a number of records which have the same attribute values across several records and the date from - date to values of these records are in a row.
RSRV is fine and we checked note 1234411 Master data reorganization - Performance improvement.
There are no other notes helping us.
Please give us a solution-idea.
Thanks
Santra

Hi Santra,
Could you please provide the solution for this?
Thanks
Vinod

BPC NW 7.0: Data Load: rejected entries for ENTITY member

Hi,
when trying to load data from a BW info provider into BPC (using UJD_TEST_PACKAGE & process chain scheduling), a number of records is being rejected due to missing member entries for the ENTITY dimension in the application.
However, the ENTITY member actually do exist in the application. Also, the dimension is processed with no errors. The dimension member are also visible usnig the Excel Client naviagtion pane for selecting members.
The error also appears when kicking of the data load from the Excel Client for BPC. Any ideas how to analyze this further or resolve this?
Thanks,
Claudia Elsner

Jeffrey,
this question is closely related to the issue, because there is also a short dump when trying to load the data into BPC. I am not sure whether both problems are directly related though:
Short dump with UJD_TEST_PACKAGE
Problem desription of the post:
When running UJD_TEST_PACKAGE, I get a short dump.
TSV_TNEW_PAGE_ALLOC_FAILED
No more storage space available for extending an internal table.
Other keywords are CL_SHM_AREA and ATTACHUPDATE70.
When I looked at NOTES, I found this Note 928044 - BI lock server". Looking at the note and debugging UJD_TEST_PACKAGE leaves me some questions:
1. Do I need a BI lock server?
2. Should I change the enque/table_size setting be increased on the central instance from 10000 to 25000 or larger?
Claudia

Problem in Flat file transaction data loading to BI7

Hi Experts,
I am new to BI7, got problem in activating data source for transaction data and create transfer routine to calculate sales revenue which is not there in flat file but flat file has got price per unit and quantity sold.
Flat file fields are:
Cust id SrepID Mat ID Price per unit Unit measure Quantity TR. Date
cu100 dr01 mat01 50 CS 5 19991001
created info objects are
IO_CUID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
When i created IO_QTY, unit/curency was given as 0UNIT. In creation of DS, under fields tab, extra field CS was shown I did confuse to which object should i map it. and at the same time when i enter IO_QTY its prompting one dailogbox with 0UNIT, so i said ok. Now i can't map CS to unit as system created automatic ally 0UNIT when i enter IO_QTY. Could you please give me solution for this and procedure to enter formulae for calculating Sales revenue at this level instead of query level. Your solutions will be more appreciated with points.
Await for ur solutions
Thanks
Shrinu

Hi Sunil,
Thanks for your quick response. I tried to assign the infoobjects under the fields tab in creation of DS. I have not reached to data target yet.
Could you please answer to my total question.
Will you be able to send some screen shots to my email id [email protected]
Thanks
Shri

Second BW data load job waits for first to complete.

Hi all,
Iam manually loading data into my BW system , i have observed that if i try to load two data source together the system wait fror one to complete then only it will trigger the secnond load. eg if i run 2lis_11_vahdr and 2lis_13_Vdhdr together.
The RSMo shows data records for 11_vahdr but for 13_vdhdr it is zero untill the the 11_vahdr finishes.
I have 8 background processes are available both in Bw and R/3
Please help.
Regards,

Hi,
the case may not be like that...if one finishes then only the other one starts....
When u start those 2 loads observe the background process in R/3 which starts with job name:BI_REQ*
As per my guesses bcoz of ur 8 background processes when u start 2 loads at a time there will be 2 jobs trigerring in R/3 with job name given above....
One job may be going into RELEASED state in R/3 and waits for the first job to finish and after that finishes the previous one comes into ACTIVE state and start generating idoc's...
by this we can say that this may be due to resorces avialability in R/3...
u closely mnitor the jobs in R/3....
rgds,
nkr.

Hierarchical Data Loading: XSD design for Native data

We are working on native data received in the form of flat file (attaching a few lines below)
FWDREF VXA04_X001_GC
FWDREF VXA04_X010_GC
FWDREF VXA04_X050_GC
FWDREF VXA04_X051_GC
FWDREF VXA04_X075_GC
FWDREF VXA04_X100_GC
FWDREF VXA04_X101_GC
FWDREF VXA04_X150_GC
SECTIDAVXBOSY SHELL AND PANELS
SECTIDAGBBOSY SHELL AND PANELS
SECTIDABKº¾À¿ÃÁ ½° º°À¾ÁµÀ¸ÏÂ° ¸ ¿°½µ»¸
SECTIDACZDKELET KAROSERIE A PANELY
ILLREFBA1 A05_A1_B
ILLREFBA1-1 A05_A1-1_B
ILLREFBA1-2 A05_A1-2_B
FWDREF VXB04_X101_GC
FWDREF VXB04_X150_GC
SECTIDBVXBOSY SHELL AND PANELS
SECTIDBGBBOSY SHELL AND PANELS
SECTIDACZDKELET KAROSERIE A PANELY
ILLREFBA1 B05_A1_B
ILLREFBA1-1 B05_A1-1_B
This data is hierarchical.
-FWDREF
--SECTID
---ILLREF
The challenge is that the number of occurrences of parent and child are not fixed and they might not occur at all
for eg there might be a set of rows like this (in the example below, there is no SECTID)
FWDREF VXB04_X150_GC
ILLREFBA1 B05_A1_B
How can the schema be designed in this case?
Thanks in advance

@rp0428
Thanks for taking out the time to reply to this. If we talk in terms of a tree structure, in the normal scenario we would the hierarchy as described before.
-FWDREF
--SECTID
---ILLREF
If we don't talk in terms of xml and xsd and just talk in terms of database and keys, FWDREF would be parent, SECTID would be child and ILLREF would be grandchild. Now, in case, SECTID does not appear, we would still want a key to be generated but have a default value corresponding to it so that the parent, child and grandchild relationship is mentioned.
The whole purpose of this XSD design is to use it in ODI where this feed file will be automatically loaded into tables from the XML generated with the parent, child and grandchild relationship maintained.
Also, I have taken a sample data set. In the actual case, the hierarchy goes upto a maximum of 20 levels.
Thanks to everyone and anyone who takes out time for this!

Data Load in BI7.0

Hello Gurus,
I am new to SAP. I want to load data into BI 7.0 from a source system but I dont want to use PSA. Could you please let me know how it can be done.
Thanks in advance.

Hello,
This depents on the Setup.
DTP & Transformation -> You have to use the PSA then you can Load the data to Data Target.
Update Rules & Transfer Rules -> You can directly load the data to Data target without using PSA,
Thanks
Geeta

Data loading in BI7.0

Hi SDNers,
In BI 7.0, how the Data is loading (Request wise) from PSA to further datatargets through DTP when loading Full Update and Delta Update.
Please give clear idea on this
Thanks,
Satya

Hi,
Please check this link:
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
-Vikram

Data Load - un-successful for LIS structure 2LIS_01_S005

Hi Guys,
I have installed a SD infocube 2LIS_01_S005 (for Shipping Point) from BC, every thing went on smooth, finally when I arrive at content display, I found zero records.
I am unable to trace where thing(s) went wrong.
please write in your valuable suggestions/solutions,
it would be greatly appreciated.
Regards,
Nasir.

Those seem to be old datasources.
Check the below link
question about 2LIS_01_S001
Hope this helps.

Is HCM Data Loader functional on fusion HCM release 8? or will it be on release 9?

I understand that the long-term plan for data loading is to provide a single tool, which is referred to as HCM Data Loader.
HCM Data Loader is intended to provide the standard data-import solution and a single entry point for managing bulk data loading to Oracle Fusion HCM.
What is the task to use this tool? (document with explanations)
Also can someone explain (in short) when to use each one the functions currently delivered by HCM File-Based Loader, HCM Spreadsheet Data Loader,
and some of the specialized data loaders and the tasks needed to get to this tools.

I have no knowledge of HCM feature availability, however this seems duplicate of this support forum thread. Adding the link here in case someone else is looking for the same information.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Master Data Loading scenario

Hi folks,
Am still struggling to understand some of the complexities associated with data loading so it would be helpful to clarify some of these.
Scenario - Master data load, 7.0 datasource, delta enabled, data is loaded to PSA via infopackage, and subsequently loaded to infoobject using DTP.
1. data load set up for Initialization:
          Infopackage level : Update Mode set to 'Initialize with Data Transfer'
          DTP level: Extraction mode set to 'Delta'. Are there any additional settings to be checked?
2. data load set up for delta:
         Infopackage level: Update Mode set to 'Delta'
         DTP level: extracton mode set to 'Delta. Are there any additional settings to be checked? Do we have to use the same DTP as was used in the Initilization?
Also, what is the process chain for the above scenario going to look like?Thank you for your replies.
Edited by: Intel1 on Feb 7, 2012 7:57 PM
Edited by: Intel1 on Feb 7, 2012 7:58 PM

Hi
1. data load set up for Initialization:
Infopackage level : Update Mode set to 'Initialize with Data Transfer'
DTP level: Extraction mode set to 'Delta'. Are there any additional settings to be checked?
This is correct. Because if you run DTP first time with delta option, it will work like init with data transfer(it will pick all the data from source and sets the delta timestamp)
2. data load set up for delta:
Infopackage level: Update Mode set to 'Delta'
DTP level: extracton mode set to 'Delta. Are there any additional settings to be checked? Do we have to use the same DTP as was used in the Initilization?
Yes, correct. No other settings are required.
Also, what is the process chain for the above scenario going to look like?
i) include delta Info package
ii) include delta DTP in process chain.
Regards,
Venkatesh

Data Load Requirement through Process Chain

Hello All,
I have implemented an area through a custom data source and following is my data load requirement through Process Chain. Request you to kindly help me for the same.
1. The design is an InfoCube and updated using a Transformation through the custom data source.
2. For the entire year 2008 I want a single request to be loaded. So it gets loaded into the PSA and then into the Infocube through a (Delta) DTP.
3. Now, I have created an InfoPackage (Full Update) with year as 2009 in the selection. Tht is I want tht hencforth the data load should be for the year 2009.
4. Hence, the Infopackage will run to bring the 2009 data into PSA and I run the (Delta) DTP to update the same in the Cube.
5. Now, what i require is everyday the InfoPackage (Full Update) with 2009 should run and bring data into PSA. and the same should be updated in the InfoCube after deleting the 2009 request already present keeping 2008 request loaded previously intact.
I hope the above is nt confusing.
Please let me know if i can elaborate the same.
Thank you.
Regards,
Kunal Gandhi

Hi,
Please go through the links.
http://help.sap.com/saphelp_nw04/Helpdata/EN/21/15843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/f8/e5603801be792de10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
These may help you in designing the process chain as required.
Regards,
Sunil
Edited by: sunil kumar on Apr 17, 2009 6:20 PM

GL Data Load - INIT and FULL

Hi,
I am getting different record count for Full and Init GL - Data loads.
Count for Init is about 300 records less than the count for Full load.
What could be the reason ?
Thanks,

while posting question be clear what cube/datasource ,which GL OLD or NEW you are working whats the background...else its just speculating and beating around bush guessing..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/45/757140723d990ae10000000a155106/content.htm
New Gl data flow-
Re: New GL cubes 0FIGL_V10, 0FIGL_V11
Hope it Helps
Chetan
@CP..

P/L A/c for a single day gives different results for different users

Hi!
     We have SAP B1 8.81 (PL 09) in our office. P/L Account for a particular date gives different value for a single account (Other Income Account) for one user and a consistent value for all other users. The user in question is a super user and does not seem to pick a specific entry posted in the Other Income Account for that day thus giving erroneous result. I have checked the Trial Balance for that day and it gives proper result. Only the P/L account gives erroneous data. Could anyone help with the reason for this.
Thanks
Sreekumar

Hi Jitin,
          Thanks for your reply.
          I tried the way you mentioned. However, the result is the same.
          The entry that I'm talking about is an automatic journal entry posted through the Outgoing Payment option.
          To make it more clear, an outgoing payment to a vendor was posted on 05/19/11 for 1,42,178.32. The check was drawn only for 71,089.16 which was the correct amount and the remaining amount (71,089.16) got posted in the Other Income account. The P/L account for this date is not picking the amount of 71,089.16 in the Other Income Account.
Thanks & Regards
Sreekumar
Edited by: Sreekumar on Jan 31, 2012 5:58 PM

How to design data load process chain?

Hello,
I am designing data load process chains for the first time and would like to get some general information on best practicies in that area.
My situation is as follows:
I have 3 source systems (R3 and two for which I use flat files).
How do you suggest, should I define one big chain for all my loading process (I have about 20 InfoSources) or define a few shorter e.g.
1. Master data R3
2. Master data flat file system 1
3. Master data flat file system 2
4. Transaction data R3
5. Transaction data file sys 1
... and execute one after another succesful end?
Could you also suggest me any links or manuals on that topic?
Thank you
Andrzej

Andrzej,
My advise is to make separate chains for master & transaction data (always load in this order!) and afterwards make a 'master chain' where you insert these 2 chains one after the other (so: Start process -> Master data chain -> Transaction data chain).
Regarding the separate chains; paralellize as much as possible (if functionally allowed). Normally, the number of parallel ('vertical') chains equals the nr of CPU's available (check with basis-person).
Hope this provides you with enough info to start off with!
Regards,
Marco

Data load in BI7 for an single infoobject

Similar Messages

Maybe you are looking for