Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)

Hi Experts,
  I made few changes to the exisisting data target and transported it to Test system...
Today when i loaded test data i got Dump: ABAP/4 processor: ASSIGN_TYPE_CONFLICT error
Now i need to reactivate the Transformations and DTP's that will fix the error
What is the reason for this error
Thanks

Yes, you are correct, you need to activate your transformation and then DTP to get rid of this error.
The reason for this error is inconsistency b/w transformation and DTP.If you have made any changes to trasforamtion and activated it, then you need to activate the DTP also. If you are loading the data without DTP activation, you will get this error. This is because the DTP is build on transformation.
Thanks...
Shambhu

Similar Messages

  • Short Dump : ABAP/4 Processor:Syntax_Error

    Hello All,
    I scheduled one chain and while activating the ODS it gave the Short Dump
    ABAP/4 Processor:Syntax_Error.
    Then i tried to change the delete the request freom ODS after changing its status to RED.
    But while deleting also it is giving the same dump.
    I am unable to delete the request also.
    In sm37 following messeges were there in logs.
    Job started
    Step 001 started (program RSODSACT1, variant &0000000005515, us
    Activation is running: Data target MPU09O74, from 19.886 to 19.
    Data to be activated successfully checked against archiving obj
    SQL: 20.11.2007 09:02:49 PJAIN
    ANALYZE TABLE "/BIC/AMPU09O7440" DELETE
    STATISTICS
    SQL-END: 20.11.2007 09:02:49 00:00:00
    SQL: 20.11.2007 09:02:49 PJAIN
    BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
    'SAPEBF', TABNAME => '"/BIC/AMPU09O7440"',
    ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
    INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
    GRANULARITY => 'ALL', CASCADE => TRUE ); END;
    SQL-END: 20.11.2007 09:02:51 00:00:02
    SQL: 20.11.2007 09:02:51 PJAIN
    ANALYZE TABLE "/BIC/AMPU09O7400" DELETE
    STATISTICS
    SQL-END: 20.11.2007 09:02:51 00:00:00
    SQL: 20.11.2007 09:02:51 PJAIN
    BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
    'SAPEBF', TABNAME => '"/BIC/AMPU09O7400"',
    ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
    INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
    GRANULARITY => 'ALL', CASCADE => TRUE ); END;
    SQL-END: 20.11.2007 09:02:51 00:00:00
    ABAP/4 processor: SYNTAX_ERROR
    Job cancelled

    See the dump in ST22 for details.

  • Dump: ABAP/4 processor: ASSIGN_TYPE_CONFLICT

    Hi SAP gurus
    Load fails with shortdump
    Tried again 2 times.
    Very high priority please solve.
    Fulls points will be assigned if no dump.
    Greetings

    Hi George,
    Activate the Transformationa nd try to load again.
    If you change the Data target and you have noit activated the transformation, you will get this type of Dump.
    Regards
    Gopal

  • BI 7.0 Dump: ABAP/4 processor: ASSIGN_TYPE_CONFLICT

    Dear Friends,
    Could any of u pl. provide me solution to above error. I am trying to load transaction data from flat file into BI 7.0
    the problem is specific to unit characteristics 0unit & 0currency.
    Data Source has following fields.
    Production qty
    0unit
    production value
    0currency.
    I have created the said objects in cube as well, mapped IS to DS, then created transformation. everything works fine. But the loading fails.
    could you pl. give ur inputs.
    Regards
    Paddy

    Thanks to all.
    I checked in SAP Service.com
    Pack 14 had to be updated, this was released on 27th June'07.
    Regards
    Paddy

  • ABAP/4 processor : ASSIGN_TYPE_CONFLICT

    I am recieveing this error message ABAP/4 processor : ASSIGN_TYPE_CONFLICT  when i ran a DTP from a flat file datasource
    to the data source object (DSO) Can someone help me ?? please...

    Hi,
    if you have written some own code in transformation please make sure that you are using fields witch have the same data type...
    ASSIGN_TYPE_CONFLICT
    DTP -ASSIGN_TYPE_CONFLICT
    DTP failure
    Regards
    Andreas

  • Display Data Flow - Short Dump

    Hi all,
    When i select display data flow of any cube...it is going for a short dump.
    I have searched for the answer in previous Forum questions. I could find only for previous BW versions but not for for BI7.
    Could you please let me know the solution for this issue.
    Thanks & Regards,
    Eswari

    Hi All,
    Thank you very much for all of your responces.....
    I am working on Support Package 10.
    Here is the detailed description of the short dump.
    Short text
        The current application triggered a termination with a short dump.
    What happened?
        The current application program detected a situation which really
        should not occur. Therefore, a termination with a short dump was
        triggered on purpose by the key word MESSAGE (type X).
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        Short text of error message:
        GP: Control Framework returned an error; contact system administrator
        Long text of error message:
         Diagnosis
             The Graphical Framework is based on the basis technology known as
             the Control Framework. A method in the Control Framework returned
             an error.
         Procedure
             It probably involves a programming error. You should contact your
             system administrator.
         Procedure for System Administration
             Check the programming of the graphics proxy especially for the
             parameters that were sent and, if necessary, correct your program.
        Technical information about the message:
        Message class....... "APPLG"
        Number.............. 229
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "CL_AWB_OBJECT_NET_SAPGUI======CP" or "CL_AWB_OBJECT_NET_SAPGUI======CM005"
        "PBO"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
       4. Details about the conditions under which the error occurred or which
       actions and input led to the error.
    Thanks,
    Eswari.

  • Master data load gives dump with exception CX_RSR_X_MESSAGE

    Hi all,
    I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
    I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
    We are on SP 12 in BI 7.0.
    We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
    with regards,
    Ashish

    Hi,
    The log of the dump is given below.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 78
    of the (Include) program "LRRMSU13".
    Source Code Extract
    Line
    SourceCde
    48
    *... Nachricht an den Message-Handler schicken
    49
    50
    *... S-Meldung wenn kein Handler initialisiert
    51
    DATA: l_type  TYPE smesg-msgty,
    52
    l_zeile TYPE rrx_mesg-zeile.
    53
    CALL FUNCTION 'MESSAGES_ACTIVE'
    54
    IMPORTING
    55
    zeile      = l_zeile
    56
    EXCEPTIONS
    57
    not_active = 1.
    58
    IF sy-subrc NE 0.
    59
    l_type = 'S'.
    60
    ELSE.
    61
    l_type = 'W'.
    62
    ENDIF.
    63
    64
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    65
    EXPORTING
    66
    i_class  = 'BRAIN'
    67
    i_type   = l_type
    68
    i_number = '299'
    69
    i_msgv1  = i_program
    70
    i_msgv2  = i_text.
    71
    ELSE.
    72
    DATA: l_text  TYPE string,
    73
    l_repid TYPE syrepid.
    74
    75
    l_repid = i_program.
    76
    l_text  = i_text.
    77
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_x_message
    79
    EXPORTING text = l_text
    80
    program = l_repid.
    81
    ENDIF.
    82
    83
    ENDFUNCTION.
    I went to SM21 and went through the system log.  There was a log with the following text  ORA-20000: Insufficient privileges#ORA-06512: at
    "SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
    I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
    I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
    Thanks Oliver and Oscar, for replying.
    regards,
    Ashish

  • SPL load short dump

    Dear Experts,
          We have a problem when trying to load the SPL (Full load/ Some deltas) in the GTS system.
    It is throwing a short dump with message saying
    "Run time Error:  DATA_LENGTH_0"
    "Except.            CX_SY_RANGE_OUT_OF_BOUNDS"
    We are not sure if there is any kind of OSS to be applied, or if something is missing.
    This is causing in Std. SAP program: /SAPSLL/SAPLSPL_UPLOAD_INTACT
    Any suggestions would be highly appreciated
    -Amit

    Hi Amit,
    could be a problem of delimiters.
    plese do the following:
    - call transaction sm30                                       
    - call view /SAPSLL/V_CMPD in change mode
    - choose your comparison schema
    Please change the structure of the delimiter the following way:                               
    It is important that the characters start with a SPACE.
    Of course you can add delimiters this structure if needed.
    Regards,
    Christin

  • Improve data load performance using ABAP code

    Hi all,
             I want to improve my load performance using ABAP code, how to do this?. If i writing ABAP code in SE38 how i can call
    in BW side? if give sample code to improve load performance it will be usefull. please guide me.

    There are several points that can improve performance of your ABAP code:
    1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
    2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
    3. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
    4.Avoid using nested SELECT and SELECT statements within LOOPs.
    5. Avoid using INTO CORRESPONDING FIELDS OF. Instead use INTO TABLE.
    6. Avoid using SELECT * and select only the required fields from the table.
    7. Avoid Executing a SELECT multiple times in the program.
    8. Avoid nested loops when working with large internal tables.
    9.Whenever using READ TABLE use BINARY SEARCH addition to speed up the search.
    10. Use FIELD-SYMBOLS instead of a work area when there are more than 200 entries in an internal table where some fields are being manipulated.
    11. Use MOVE with individual variable/field moves instead of MOVE-CORRESPONDING.
    12. Use CASE instead of IF/ENDIF whenever possible.
    13. Runtime transaction code se30 can be used to measure the application performance.
    14. Transaction code st05 can be used to analyse the SQL trace and measure the performance of the select statements of the program.
    15. Start routines can be used when transformation is needed in the data package level. Field/individual routines can be used for a simple formula or calculation. End routines are used when you wish to populate data not present in the source but present in the target.
    16. Always use a WHERE clause for DELETE statement. To delete records for multiple values, use SELECT-OPTIONS.
    17. Always use 'IS INITIAL' instead of equal to '' because null for a character is '' but '0' for an integer.
    Hope it helps.

  • Master Data Loading Error

    Hi,
    While loading the master data from R/3 below error message getting.
    Error Message:DUMP:ABAP/4  Processor:ASSIGN_TYPE_CONFLICT.
    Thanks,
    Jayapal.

    hi,
    Check..
    /thread/261418 [original link is broken]
    Data Load Short Dump (ABAP/4 processor: ASSIGN_TYPE_CONFLICT)
    Also, Check..
    OSS note 971584 - ASSIGN_TYPE_CONFLICT in the DTP program
    Regards
    Lavanya

  • Short dump Error-ABAP/4 Run time Error

    Hi Expert,
    Dump:ABAP/4 Processor:MESSAGE_TYPE_X Why this error came,I would like to Investigation on Perticular error,Please Some body give me an Exact answer,so that i closed the ticket.
    Regards,
    Raju.

    Hi Suresh,
    What is the actual issue?
    When did you get this error.
    To know about this type of error, check below link...
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dump%3aABAP%2F4Processor%3A+MESSAGE_TYPE_X&adv=false&sortby=cm_rnd_rankvalue
    Also check this:
    Note 1016317 - SP13:PC: Start type 'Date & time' gets scheduled wrong
    "Process chain scheduling results in dump- ABAP/4 processor: MESSAGE_TYPE_X"
    Solution:
    In the short dump analysis, the process fails at function module
    RSS2_PSA_NEW_OLD_DS
    call function 'RSDS_DATASOURCE_SINGLE_GET'
    Regards,
    KK.

  • Master data load for 0COSTCENTER (Cost Center) failing

    Hi Experts
    I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
    (R) Filter Out New Records with the Same Key
          (G) Starting Processing...
          (R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
    I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
    Could you help me on this one please.
    Regards
    Akshay Chonkar

    Thanks All
    I have got the issue resolved
    The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
    So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
    Everything is fine now thanks for your help.
    Regards
    Akshay Chonkar

  • Short dumps, tuning

    What are techniques used for tuning query performance? Please explain in detail?
    What are short dumps how can we check?
    What methodologies we follow for the PSA cleansing? Where exactly is the PSA change log where we can delete the request based on timestamp details am using BW 3.1c?
    plz help points assured....

    Hi,
    For query performance please check the following link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm
    Short dumps:
    A short dump is an program error because of which the process terminates. It is notified and can be viewed in t-code ST22 on a particular usernaem where you can analyze the reason for short dump.
    and refer these links
    http://publib.boulder.ibm.com/tividd/td/ITMAN/SC32-9195-00/en_US/HTML/sap_add06.htm
    short dump
    Short dump while loading data?
    Update rules activation gives short dump?
    Delete of Master Data creates short dump?
    PSA:
    check the following link
    http://help.sap.com/saphelp_nw70/helpdata/EN/bd/c627c88f9e11d4b2c90050da4c74dc/frameset.htm
    Hope it help u.
    Assign Points if it helps.
    Regards,
    RKC
    Edited by: RKC on Mar 7, 2008 11:29 AM

  • EWA on solution manager - short dumps

    Hi there
    I've setup EWA on solution manager for Remote System BWQ, all test etc went fine, but as soon as I start service processing on solman to retrieve the data, a short dump is create as follows:
    Short text
        Syntax error in program "RDSVASAEA_ROOT_____________049 ".
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "RDSVASAEA_ROOT_____________049
      " in include "RDSVASAEA_ROOT_____________049 " in
    line 87:
    "INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    could anyone please assist me with this.
    Regards,
    Stephan

    Hi
    So i tried to implement the above mentioned notes, but to update the solution manager stack, i have to use maintenance optimizer to approve the stack...
    I have added solution manager 7.0 to the solution overview, and can select it from 'Plan Maintenance' window.. but as soon as i try and go to the second step, another short dump is created.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Exception              CX_SOCM_NOT_IMPLEMENTED
    Date and Time          13.06.2008 09:25:45
    |Short text                                                                                |
    |    An exception occurred that was not caught.                                                    |
    |What happened?                                                                                |
    |    The exception 'CX_SOCM_NOT_IMPLEMENTED' was raised, but it was not caught                     |
    |     anywhere along                                                                               |
    |    the call hierarchy.                                                                           |
    |                                                                                |
    |    Since exceptions represent error situations and this error was not                            |
    |    adequately responded to, the running ABAP program                                             |
    |     'CL_CHM1_CHANGE_REQU_INSTANCE==CP' has to be                                                 |
    |    terminated.                                                                                |
    i then looked at Notes:
    Note 851496 - Exception: CX_SOCM_NOT_IMPLEMENTED missing implementation
    Note 849690 - BC Set Change Management
    But none of them seem relevant to our SOLMAN.

  • Short dump in delta extract  using bgRFC in NW 2004s

    Short dump in delta extract after Support Pack install, using bgRFC. 
    InfoSet Query extractor from Z-table residing on BW system into ODS. 
    Init and Full loads load successfully, delta loads short dump.
    "MESSAGE_TYPE_X"        
    "SAPLARFC" or "LARFCU25"     
    "TRFC_SET_QUEUE_RECEIVER_LIST"
    Problem began after support pack install, from SP 9 to SP 12.   Switched to Classic RFC in SM59,  seemed to correct this extractor but caused problems in  other extractors.

    Hi Kevin,
    check out this note: https://websmp205.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1054970&_NLANG=EN
    it might help.
    regards
    Siggi

Maybe you are looking for