Data loading from planning forms into two different essbase application

Hi All,
I have 2 different planning application into 2 different planning and essbase server but the application repository for these applications is same which is lying into 3rd server. Due to this when I add the member into any application it will automatically reflect into another application because the application repository is same. When I refresh the applications the meta data is loaded into there corresponding Essbase server.
My problem is:
When I enter the data figure into the planning form it is going into there corresponding Essbase cube. But I want when user enter the data into 1 planning application form it should be reflected into both Essbase application , LIKE METADATA which is not happening. We are doing this for fail over support.

Hi,
I am sorry but that is not how I look at, the point of failure for a planning application would the web server, repository, essbase database...
If it is the web server element then surely you would have two planning web servers pointing to one planning application and one repository.... then if one web server went down to switch to the other web server?
You won't get a planning application to write to two seperate essbase applications, if you want failover on essbase then you will need to look at alternative methods.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • How to insert data from APEX form into two tables

    Hi,
    I'm running APEX 4.1 with Oracle XE 11g, having two tables CERTIFICATES and USER_FILES. Some of the (useless) fields are cut to reduce information:
    CREATE TABLE CERTIFICATES
    CERT_ID NUMBER NOT NULL ,
    CERT_OWNER NUMBER NOT NULL ,
    CERT_VENDOR NUMBER NOT NULL ,
    CERT_NAME VARCHAR2 (128) ,
    CERT_FILE NUMBER NOT NULL ,
    ) TABLESPACE CP_DATA
    LOGGING;
    ALTER TABLE CERTIFICATES
    ADD CONSTRAINT CERTIFICATES_PK PRIMARY KEY ( CERT_ID ) ;
    CREATE TABLE USER_FILES
    FILE_ID NUMBER NOT NULL ,
    FILENAME VARCHAR2 (128) ,
    BLOB_CONTENT BLOB ,
    MIMETYPE VARCHAR2 (32) ,
    LAST_UPDATE_DATE DATE
    ) TABLESPACE CP_FILES
    LOGGING
    LOB ( BLOB_CONTENT ) STORE AS SECUREFILE
    TABLESPACE CP_FILES
    STORAGE (
    PCTINCREASE 0
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    FREELISTS 1
    BUFFER_POOL DEFAULT
    RETENTION
    ENABLE STORAGE IN ROW
    NOCACHE
    ALTER TABLE USER_FILES
    ADD CONSTRAINT CERT_FILES_PK PRIMARY KEY ( FILE_ID ) ;
    ALTER TABLE CERTIFICATES
    ADD CONSTRAINT CERTIFICATES_USER_FILES_FK FOREIGN KEY
    CERT_FILE
    REFERENCES USER_FILES
    FILE_ID
    NOT DEFERRABLE
    What I'm trying to do is to allow users to fill out all the certificate data and upload a file in an APEX form. Once submitted the file should be uploaded in the USER_FILES table and all the fields along with CERT_ID, which is the foreign key pointing to the file in the USER_FILES table to be populated to the CERTIFICATES table. APEX wizard forms are based on one table and I'm unable to build form on both tables.
    That's why I've created a view (V_CERT_FILES) on both tables and using INSTEAD OF trigger to insert/update both tables. I've done this before and updating this kind of views works perfect. Here is where the problem comes, if I'm updating the view all the data is updated correctly, but if I'm inserting into the view all the fields are populated at CERTIFICATES table, but for USER_FILES only the fields FILE_ID and LAST_UPDATE_DATE are populated. The rest three regarding the LOB are missing: BLOB_CONTENT, FILENAME, MIMETYPE. There are no errors when running this from APEX, but If I try to insert into the view from SQLDeveloper, I got this error:
    ORA-22816: unsupported feature with RETURNING clause
    ORA-06512: at line 1
    As far as I know RETURNING clause in not supported in INSTEAD of triggers, although I didn't have any RETURNING clauses in my trigger (body is below).
    Now the interesting stuff, after long tracing I found why this is happening:
    First, insert is executed and the BLOB along with all its properties are uploaded to wwv_flow_file_objects$.
    Then the following insert is executed to populate all the fields except the BLOB and it's properties, rowid is RETURNED, but as we know RETURNING clause is not supported in INSTEAD OF triggers, that's why I got error:
    PARSE ERROR #1918608720:len=266 dep=3 uid=48 oct=2 lid=48 tim=1324569863593494 err=22816
    INSERT INTO "SVE". "V_CERT_FILES" ( "CERT_ID", "CERT_OWNER", "CERT_VENDOR", "CERT_NAME", "BLOB_CONTENT") VALUES (:B1 ,:B2 ,:B3 ,:B4, ,EMPTY_BLOB()) RETURNING ROWID INTO :O0
    CLOSE #1918608720:c=0,e=11,dep=3,type=0,tim=1324569863593909
    EXEC #1820672032:c=3000,e=3168,p=0,cr=2,cu=4,mis=0,r=0,dep=2,og=1,plh=0,tim=1324569863593969
    ERROR #43:err=22816 tim=1324569863593993
    CLOSE #1820672032:c=0,e=43,dep=2,type=1,tim=1324569863594167
    Next my trigger gets in action, sequences are generated, CERTIFICATES table is populated and then USER_FILES, but only the FILE_ID and LAST_UPDATE_DATE.
    Finally update is fired against my view (V_CERT_FILES), reading data from wwv_flow_files it populates BLOB_CONTENT, MIMETYPE and FILENAME fields at the specific rowid in V_CERT_FILES, the one returned from the insert at the beginning. Last, file is deleted from wwv_flow_files.
    I'm using sequences for the primary keys, this is only the body of the INSTEAD OF trigger:
    select user_files_seq.nextval into l_file_id from dual;
    select certificates_seq.nextval into l_cert_id from dual;
    insert into user_files (file_id, filename, blob_content, mimetype, last_update_date) values (l_file_id, :n.filename, :n.blob_content, :n.mimetype, sysdate);
    insert into certificates (cert_id, cert_owner, cert_vendor, cert_name, cert_file) values (l_cert_id, :n.cert_owner, :n.cert_vendor, :n.cert_name, l_file_id);
    I'm surprised that I wasn't able to find a valuable source of information regarding this problem, only MOS note about running SQLoader against view with CLOB column and INSTEAD OF trigger. The solution would be to ran it against base table, MOS ID 795956.1.
    Maybe I'm missing something and that's why I decided to share my problem here. So my question is how do you create this kind of architecture, insert into two tables with a relation between them in APEX ? I read a lot in the Internet, some advices were for creating custom form with APEX API, create a custom ARP, create two ARP or create a PL/SQL procedure for handing the DML?
    Thanks in advance.
    Regards,
    Sve

    Thank you however I was wondering if there was an example available which uses EJB and persistence.

  • Data loading from flat file into bw

    Hi Experts,
    When we load data from flat file into BW the <b>sequence of fields in flat file</b> should be matched with the <b>transfer structure</b> or <b>communication structure</b>?
    wid thanX,
    arijit

    Arijit,
    The sequence of fields in a flat file must be the same as this one in the transfer structure.
    The comm and tran structures are the same after the first creation of datasource from flat file source system. After that someone could change the sequence in the CS -- if the mapping of fields in transfer rules remains unchanged, then the load is to be succesful.
    In case of changing the sequence in TS you'll get either error or wrong load (values to be loaded into some infobjects will go to another ones.)
    Best regards,
    Eugene

  • Can I load data collected from one form, into a new form?

    I have created an Employment Application which collects pre-employment data for our prospective employees. I would like to be able to load that data into an Employee Packet once the decision is made to hire the prospect. Is that possible?

    Are you using a PDF form, and if so, do you have Acrobat?

  • Can I embed my form into two different websites?

    We are collecting registrations for an event that two organizations are putting on together. Is there an issue if we use the same embed code on the website of each organization? If not, will we be able to automatically determine which site the registration came through or should I add that as an option on the form itself?

    You should be able to use the same code. You can also create a duplicate form and use it on the other site and then combine the responses after exporting.

  • Open two Forms  Connecting Two different Data bases simultaneously.

    i am facing a problem for opening two forms in two different SAPB1 applications where it is connecting into two different databases.please send me a solution for this problem.

    Hi Hareen,
    What is your goal to design a form for connecting 2 databases in the same time?
    Thanks,
    Gordon

  • Data loading from flat file to cube using bw3.5

    Hi Experts,
                       Kindly give  me the detailed steps with screens  about Data loading from flat file to cube using bw3.5
           ...............Please

    Hi ,
    Procedure
    You are in the Data Warehousing Workbench in the DataSource tree.
           1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
           2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                                c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
    Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
    In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
           4.      Go to the Extraction tab page.
                                a.      Define the delta process for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      Real-time data acquisition is not supported for data transfer from files.
                                d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
    Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
    Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
    You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                                  f.      Depending on the adapter and the file to be loaded, make further settings.
    ■       For binary files:
    Specify the character record settings for the data that you want to transfer.
    ■       Text-type files:
    Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
    Specify the character record settings for the data that you want to transfer.
    For ASCII files:
    If you are loading data from an ASCII file, the data is requested with a fixed data record length.
    For CSV files:
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
    Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
    If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                                g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                                h.      Make the settings for currency conversion, as required.
                                  i.      Make any further settings that are dependent on your selection, as required.
           5.      Go to the Proposal tab page.
    This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
    Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                                a.      Specify the number of data records that you want to load and choose Upload Sample Data.
    The data is displayed in the upper area of the tab page in the format of your file.
    The system displays the proposal for the field list in the lower area of the tab page.
                                b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
           6.      Go to the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                                a.      To define a field, choose Insert Row and specify a field name.
                                b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                                c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                                d.      Change the data type of the field if required.
                                e.      Specify the key fields of the DataSource.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                  f.      Specify whether lowercase is supported.
                                g.      Specify whether the source provides the data in the internal or external format.
                                h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                  j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    For More Info:  http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

  • Calling Sql*Loader from oracle Form builder

    How do i call sql* loader from my forms to import the external data in different formats into my existing database?
    Specify the flexibility of sql* loader to import external data from .txt files or .xls files.
    Would be thankful if certain examples are given along with the answer.

    Hi,
    1. First you have to create seperate ctl (Control files) which maps to different file formats
    2. Using Oracle Forms,
    2a) You can use the 'HOST' command to execute the command line ie. In this case executing
    SQL*Loader script
    2b) You also have the feature in ORACLE forms to read text files and load the data into
    ORACLE db.
    This can be achieved by using TEXT_IO package which comes with ORACLE Forms.
    Hope this helps
    Ta
    Shailender

  • Data transfer from planning to ASO.

    Hi,
    Like that:
    Data load in Planning, and data retrieve in ASO. And we want a real time data transfer from Planning to ASO.
    Transparent partition from BSO to ASO is a choice, but the performance is an issue.
    If we user replicated partition, data cannot be transferred to ASO instantly, since there is a step to replicate data to ASO.
    And for Map Reporting Application in Planning, we got the mapping issue, since there are some dimension members totally different between Planning and ASO.
    So, can anyone help to show other ways to do that?
    Thank you.

    iTunes does transfer files like pictures, music, video, and I believe under the apps section it should transfer specific app files too.
    otherwise I don't know. I tried to get my ipad to link to my computer with bluetooth (it saiys it is linked now) but when I try to transfer a file or browse the device it won't work.... I dunno!

  • Identifying user who submitted the data through SmartView / Planning Forms

    Hi All ,
    We are facing one strange issue wherein data from the data files of the source system is not getting matched with the data loaded in Planning Application.
    We think that the data for the member combination which is not getting matched is modified by user either through SmartView or Planning Form.
    We need to Identify whether such modification is happened or not from the user either through SmartView or Planning Forms ?
    Is there any way we can find this details from any log or any back end tables ?
    Could you please share your thoughts on this.
    Thanks in advance !

    If you have setup auditing in Planning. See Setting up Audit Trails for more details.
    Regards
    Celvin Kattookaran

  • BPC:: Master data load from BI Process chain

    Hi,
    we are trying to automatize the master data load from BI.
    Now we are using a package with:
    PROMPT(INFILES,,"Import file:",)
    PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
    PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
    PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%TEMPNO2%,%INCREASENO%)
    TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
    TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
    TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
    TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
    TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
    But we need to include these tasks into a BI process chain.
    How can we add the INFO statement into a process chain?
    And how can we declare the variables?
    Regards,
    EZ.

    Hi,
    i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
    \ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
    How can we put this root???
    Regards,
    EZ.

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • Delta load from planning area to third party system

    Hi All,
    Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
    Thanks

    Hi Tarun,
    It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects,  and planning area is not a BW object.
    SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
    PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
    Thanks - Pawan

  • How to split one monitor into two, differently configured desktops

    Hello,
    I have a 27" iMac. I would like to split the screen into two differently configured desktops or monitors. Apps like TwoUp or Divy don't exactly do this. I'll explain it with an example:
    Suppose I'm working on a document and I need to open many folders to retrieve files. One common problem is that opened folders overlap each other and sometimes they overlap with the document I'm working on, or they go underneath the document. I would like to split the screen vertically in, say, two virtual, independent desktops/monitors, like this:
    - one window/space on one side (say, on the left) of the screen would contain the document  from top to bottom, with no dock bar on the bottom
    - the other window/space (right) would behave as a regular, full desktop, with the entire dock on the bottom
    In this way, if I need to navigate to find a file to use in the document, I would move the cursor to the right. The Finder would work only in this window/space, thus windows or other applications would never overlap or clutter the left side of the screen. Drag-and-drop from right to left should be possible.
    One way to imagine it is as if the 16x9 monitor were comprised by two vertical, 8x9 independent monitors side by side, each with its own configuration.
    Is this possible? Can anyone recommend an application or type of setup?
    Thank you,
    -celso

    Looking for something like this?
    You can tell Display Maid to save the positions of your open windows across many apps and later restore those positions when things become a mess. With Display Maid you don’t have to restore windows one at a time, or even one app at a time. Display Maid restores all saved window positions across all apps with one command. It will also restore window positions automatically when it detects a workspace change.
    http://www.funk-isoft.com/index.php/display-maid

Maybe you are looking for