Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects,  and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Similar Messages

  • Handling load of data in PI - third party systems to SAP R3(Idocs)

    Hi,
    Request your help in addressing the below issue:
    PI (PI 7.0) is receiving a huge load of messages from third party systems at one point of time and it is creating Idocs and dispatching the Idocs to SAP R3 system.
    Since the load that is being received by R3 is more than the work processed available in R3 system, the Idoc processing is being set as a background job which inturn is creating spool requests in R3 system and this is leading to spool overflow issue.
    Is there any possiblity to control the dispatch of Idocs from PI system, say, the Idocs should be queued up in tRFC of PI until the work process in R3 system would be available.
    Please suggest any other possible resolutions to resolve this issue.
    Thank you.
    Regards,
    Subbu

    >>Please suggest any other possible resolutions to resolve this issue.
    Modify idoc occurences and send individual idocs could solve your problem
    Check Michal blog
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    Idoc packaging suggestion given in this thread
    Re: XI/PI: Receiver IDOC adapter packaging
    Edited by: Baskar Gopal on Mar 25, 2011 12:52 PM

  • Commitment Interface from SAP to the third party system!

    When we created Purchase Requisition or Purchase Order, the commitment will be created. The third party system needs to track the commitment. So SAP needs to send the commitment to the third party system by this interface.
    But when the Goods have been delivered, the commitment will be zero out and the actual will be posted to SAP. SAP needs to send the offsetting records to the third party system. In this way, the third party systems knows that how much commitments have been reduced.
    My problem is that I cannot find the right table to record the offsetting entry. In the table COSP, I can identify the commitment by the Business Transaction -- RMBA and RMBE. But it did not record the offsetting entry. It just becomes zero when the goods have been delivered. But I have nothing from that table to send to the third party system.
    Does anyone meet this problem before? Can you share some experience on this?
    Thanks

    Hello All,
    The issue is resolved now. In the EAI seebeyond at the time of writing the file to be sent after reading the IDOC the format is changed. Initially the file is written in the ASCII format now we have changed the formatting to ISO to resolve the same.
    Thanks,
    Mohit

  • Sending Data from BI to Third Party System through CIB Interface

    Hi Experts ,
    We have a requirement where we need to send data from BI to any Third Party System through CIB Interface . We do not have to use the OHD's . Please share the documents for the same .
    Regards
    Garima

    Hi,
          My problem is solved.
    Sol:  Getting wrong data from third party sytem. They are adding spaces in front of the payload and end of the payload so it was not processing. After deleting that spaces its is working fine.
            Thanks for your help.
    Thanks & Regards,
    Purshothamm

  • How to file data from sap server to third party-tibco using EDI-Idoc?

    Hi all,
    I need to send data from sap server to third party system in th form of file.
    Please guide me how to send data file from sap server to third party-tibco using edi-idoc?
    Also guide the configuration ti be done for EDI.
    Thank you.

    1)create file port
    2)TCP-IP RFC destination with a program RFCEXEC to be executed on application server
    3)Dummy distribution model
    4)Partner pofile of type other han LS

  • Error in delta loading from a planning cube

    hi all,
    I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
    any help is appreciated.

    Hello Ajay,
    Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
    It is a customizing issue to tell the infopackage to end "green" when it has no data.
    Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
    Hope that helps
    best regards
    Yannick

  • Incoming invoice from third party system

    Hi All,
    Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
    Thanks in advance for response.

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • PO import from third party system

    Hi All,
    We have a third party system where PO's are created and imported into Oracle as an approved PO via Standard interface table. A PO was created in Aug 2012 and is stuck in interface tables with rejected status as the vendor site ID missing. So updated the interface table with vendor site ID. And ran import standard PO program. PO is imported but with the date in FEB 2013 instead of the date in Aug 2012. ( As the PO period for Feb 2013 is opened)Why it happened? And is there any way I can cancel/delete the PO from Oracle and resend it with the same old date I.e., Aug 2012 date and so that it can create with old PO Number.
    Thanks in advance,
    Regards,
    Pramod

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • Avtivation of BC set from Third party system

    Dear All,
    We are using BC sets for configuration of regular business organizational units. We also have a workflow in third party system (like MS Share Point) for approval of such elements. Now we are looking to call BC sets for configuration of these elements Via third party system upon approval in workflow.
    Kindly help me to understand the feasibility & possible approach to develop the system.
    Thanks & Regards,
    Sandip

    Hi,
    Your question if i understood correctly.
    You cannot transfer the BC Set from one system to another.
    BC sets are used to have a snap shot for your customizing in SAP.
    This are predefined by SAP, which as per mine knowledge you cannot transfer from an external tool to SAP ECC.
    Kindly refer the below doc which may help you...
    Business Configuration Sets (BC Sets) and their use - Basis Corner - SCN Wiki
    Rgds,

  • Missing key figures from planning area after recent transports

    Hi,
    We are facing an issue of data not loaded to the planning area , realized this after planning book does not show any values in the current week bucket. However the required values show up in the Infocube. Our setup is as below on SCM 7
    external FILE---> FILE DataSource -
    >CUBE -
    > /SAPAPO/RTSINPUT_CUBE program -
    > Planning area ---> planning book
    Recent transports included selelction variant for the above program and now we see that some Key Figures are missing from Planning area from the KEY FIG assignement tab option from the above RTSINPUT_CUBE program.
    Can any one please help
    Edited by: AAL123 on May 19, 2011 11:25 AM

    Hi,
    Did you check what all change objects have been selected in your trasport request which is causing this?
    Best Regards,
    Chandu.

  • RFC Not found from the Third party system

    Dear Friends,
    I have customized a RFC, All components are active.
    When I am searching the RFC from third party system this RFC is not able to find, others are showing.
    What could be the reason..../
    Thanks & Regards

    Hi Sachin,
    Just to be sure, could you please check whether the RFC radio button is selected in ATTRIBUTES Tab of SE37 for your RFC. Also check if the RFC is active.
    Best regards,
    Prashant

  • Open iProcurement Smart form from a Third Party System

    Hi,
    I have a requirement to open the iProcurement smart form from a third party system. We have the Single Sign on functionality so the user can log into the oracle apps without entering the credentials.
    Please share if someone has prior knowledge on that.
    Thanks & Regards,
    Munish Mittal

    If the ICX_SESSION is already available then the form(I am assuming you are refering to a web based form here) should open directly if the function should be accessible to the user logged in. When you say your custom application is included in Oracle apps are you launching these pages from the Ebiz home page through menus and functions ?

  • Item master synchronisation from third party system to SAP

    Hello ,
    I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
    We have implemented Catalog functionality.  Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
    Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
    How does we can make this synchronisation? What are the possible solution for this?
    You valuable inputs will be highly appreciable.
    Regards,
    Prashant

    Hi Neetu
    you have to mainatin Item text and not for material PO text...
    Do these settings:
    SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
    then check you should have a entry for "Item Text" if not then
    Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
    please confirm if these settings are already there?
    regrds
    yogesh

  • Data upload from third party system to GRT table.

    Hello,
            Can you please let  me know how we can upload payroll data from a legacy system (to be more clear, how to upload data that we receive from a third party system) into GRT table. 
    Note:The file should be tab delimited text file.
    As of now, i figured out 2 FMs which I thought can be used.....BAPI_EXTPAYROLL_INSERT_OUT and BAPI_EXTPAYROLL_INSERT_LEGACY.
    Please let me know the steps to upload the same (start to end).  A code snippet will be of much help to me.
    Regards,
    RK

    Are you looking for loading your legacy payroll data into SAP ?
    SAP have a standard tables (T588B & T588C) that can be used along with standard schema (XLK0) for updating payroll results.
    They also have a utility program to upload data into T588B & C.
    Search for  Legacy Data Transfer in IMG and yo will find the relevant steps.
    Regards
    Ravikumar

  • Back up cube for report from planning area

    Hi Gurus,
            We are in implementation and i had seen that client wanted to see daily data and wanted to delete that data and load next day data.One more point is client even wanted monthly data as well in a same cube and this two facilities should be in single info cube.
    How is is possible?
    for further info we have calday and calmonth time Chart.
    please suggest me some good ideas.
    I will be verythankfull to your suggestions.
    Thanks a Lot
    Regards,
    Raj

    Hi Raj,
    You can use SAP BW to create reports for the user. You have the option of using an external BW system or the BW system that is coupled with the APO server. If you have an external BW system, then it is recommended that you report from there. As you may know APO is an OLTP system and thus is configured for such. The external BW system will be configured for OLAP access and thus would be much more suitable for reporting purposes.
    You may want create a SAP RemoteCube so that the data in your report is "as fresh as possible".
    Here are the steps if you will be using the BW component in the APO system:
    1) Create an export datasource for your planning area. (Transaction /n/SAPAPO/SDP_EXTR)
    2) Create an InfoSource and attach the datasource your have created in step 1. (transaction RSA1 Modelling tab)
    3) Create a SAP RemoteCube and attach your InfoSource and SourceSystem to that.
    4) Create a BeX query and a BeX report (either in Web or Excel).
    If you will be using an external BW system here are the steps:
    1) Create an export datasource for your planning area in the APO system (Transaction /n/SAPAPO/SDP_EXTR)
    In the external BW system:
    2)replicate the datasource your have created.(transaction RSA1, Modelling tab, sourcesystems->choose the APO system->Right click->Replicate DataSources).
    3) Create an InfoSource and attach the datasource that you have created in step 2. (transaction RSA1 Modelling tab)
    3) Create a SAP RemoteCube and attach your InfoSource and SourceSystem to that.
    4) Create a BeX query and a BeX report (either in Web or Excel).
    Note that a RemoteCube is only suitable for few users only. If you will have many users, you need to create a Basic InfoCube instead.
    In your BeX query, you can choose the granularity of your report. If you want your report to be aggregated to monthly level then be sure to include the 0CALMONTH InfoObject.
    Please post again if things are not clear and I will be happy to help out.

Maybe you are looking for