Data lost in Production

Hi Everyone,
We got a very big problem in production system.
We had transported one ztable (contains customer number, material as primary key) to production earlier. this ztable contains data which was updated by users.
We had changed date also primary key now, and sent it to the production system,
while sending from test to production, it got moved and got error log, we tried to check the table contents when we click on 'table contents' button showing an message that 'ztable' does not exists in the database.
and we went 'SE14' and clicked on 'active and adjust database table' now table is there in production but data has gone what could be the problem.
could anyone help me out in this.
Thanks in Advance,
~Teena.

Hi Vasanth,
Thanks for the early responce ,
but we didn't see any 'Save data' option in 'SE14'
it showed that push buttons: 1. Continue adjustments
2 .'Unlock table' in Red colored Cross mark
we have clicked on continue adjustments.
our BASIS guy doesn't know about clients database.
Thank you all
~Teena

Similar Messages

Why the cached data lost from Coherence?

Yesterday,I sarted a storage-enabledcache server by running cache-server.cmd and started a storage-disabled cache console by running coherence.cmd.
Then I inputed the following commands to input some data into the Coherence caches:
cache(cb)
put a a
put b b
put c c
put d d
put e e
Map (cb): list
c = c
e = e
a = a
d = d
b = bBut today, when I issue the list command from the Coherence command line, the output become "null".
Why the data lost?

By running cache-server.cmd Coherence will be using the configuration file from the coherence.jar which will default to a cache with expiry of one hour. So if you had checked you cache after an hour or so you would have seen it was empty.
If you look at the coherence-cache-config.xml file inside the coherence jar you will see this mapping (which will apply to the cache you created with the name "cb"
    <cache-mapping>
      <cache-name>*</cache-name>
      <scheme-name>example-distributed</scheme-name>
    </cache-mapping>This maps to a scheme called example-distributed that looks like this:
    <distributed-scheme>
      <scheme-name>example-distributed</scheme-name>
      <service-name>DistributedCache</service-name>
      
      
      <backing-map-scheme>
        <local-scheme>
          <scheme-ref>example-binary-backing-map</scheme-ref>
        </local-scheme>
      </backing-map-scheme>
      <autostart>true</autostart>
    </distributed-scheme>which uses the example-binary-backing-map scheme
    <local-scheme>
      <scheme-name>example-binary-backing-map</scheme-name>
      <eviction-policy>HYBRID</eviction-policy>
      <high-units>{back-size-limit 0}</high-units>
      <unit-calculator>BINARY</unit-calculator>
      <expiry-delay>{back-expiry 1h}</expiry-delay>
      <flush-delay>1m</flush-delay>
      <cachestore-scheme></cachestore-scheme>
    </local-scheme>which you can see has expiry set to 1 hour.
I once had to help out a team who managed to get a node using this configuration on their production cluster and lost random data every hour!
JK

NMH - All DATA LOST

Media Hub Reset - All data lost
Hi,
I have NMH300, Serial No ; BTS26J306488.It was running in RAID Mode (Disk Mirror) with two 1TB Hard Disks.
The firmware was up to date.And I had enabled various services on it, like Windows Shares, FTP etc.I had also renamed the hub to "MYCLOUD"
Then one day last week when I tried to find the mediahub "MYCLOUD" on my network shares list it was no longer visible.
The status of Lights on the hub was Both disks "Blue" in colour.
Then after trying to investigate, I realised that the device has rested to its default state and all my configurations are gone. The name is also reset to "MEDIAHUB"
Then in the configuration sections, I went to "DISK" settings.
There I see that Slot B is empty.
So what I interpret from this is that one of my disks might have crashed.
But the sd part is it also says "RAID MODE" Linear1
HELP : Can linksys help me get my data back.
I feel so betrayed by the promise of a reliable NAS device by Cisco.
How can CISCO design products that are not properly tested before launching in the market.I havd approx 800 GB of data that seems to have just vanished.

Hi there,
It is sad that things like this happen. I haven't encountered any major issues with my mediahub for the past 2 years. Now, the only way that it will revert back to single disk mode is when someone would actually set it via configuration page. Now, since your two 1TB drives were set originally to RAID1, try to take out the 2nd HD (Slot 2) from the Mediahub and check if your files are still there. You can also try to take out the HD from slot 1 and replace it with the HD from slot 2 leaving just 1 HD at a time. You may do a hard reset on the mediahub as well. Doing a reset would change your disk configuration. It will only change the basic settings (mediahub's friendly name, FTP name). So just give it a shot and post some updates.
Hope this could help. I am not sure if Cisco has data recovery facility. If your HD is within manufacturer warranty, then you may try to have it recovered on their end.
Cheers!

How can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again..

how can i connect iphone to itunes.. i want to restore because my finger mistakes that click Reset all content and setting.. so iphone are empty.. all foto and data lost, right.. how can i use my iphone again.

Yes, try to restore your iPhone from iTunes or iCloud backup.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Tell us the result if you will try.
<Link Edited By Host>

Is it possible to recover ical data lost in a sync?

Is it possible to recover ical data lost in a sync?

Your only bet is to resotre from the Time Machine backup. However when you do this the sync process will promptly delete the calendars again, so you need to work through the slightly convoluted method detailed in this page:
http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

No organization data for service products

Hi,
I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
Regards
Jochen

Hi
Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
Thanks
Satheesh

Trouble: HD "Data Lost," DiskWarrior stumped, then a "Clean Install"

Hello Classic Fans,
Since installing OS 9.1 on my 1998 WallStreet PowerBook on 25 April 2005, I enjoyed a PERFECT computer until 3 days ago (16 Feb. 2006) when my Mac started badly acting up.
I'll chart what happened and what I did to correct the problem in the hope it may help others. I would also appreciate feedback telling me if what I did was correct and if there's anything else I should do. Since I'm just now back up and running I'm not sure the problem is gone.
Sequence of Events:
16 Feb: While surfing in InternetExplorer 5.1.7 the program quit then the display froze. Ran DiskWarrior (5% out) and installed fresh copy of I.E. I had not had a freeze for many moons!
17 Feb: Got "Data Lost" on HD error message twice. Ran DiskWarrior again (5% out).
Backed up recent important "Documents" stuff to CD.
(Note: From past experience I knew that the HD "Data Lost" error means certain trouble).
18 Feb: It's back! Got HD "Data Lost" right away. This time the error box kept flashing and dinging like nuts and wouldn't stop.
Forced restart.
Flashing "Question Mark" appeared (HD can't recognize its own "System" software!)
Booted to Zip Rescue Disk with DiskWarrior on it.
DiskWarrior can't see HardDrive -- none of my normal desktop icons appear either.
Shut down with Power Button.
Tried to start/boot to HD ("System" folder) using Power Button.
This time HD recognized its "System" folder and started normally! (How come it could normally boot this time but not last time?)
Restarted to the Boot Rescue Zip. This time DiskWarrior COULD see HD, so I ran DiskWarrior (1% out) on the HD and successfully rebuild Directory.
Almost certain now that something was wrong more than DiskWarrior could fix (I had run DiskWarrior twice in 2 days and the problem was still there and getting worse), I consulted the Apple TroubleShooting guide and decided to do a "Clean Install" of OS 9.1 before I lost EVERYTHING on my HD (that dire event happened before!)
Did "Clean Install" of OS 9.1.
Moved the following folders from the "Previous System" suitcase to the new clean install "System" Suitcase: Control Panels, Extensions, Favorites, Apple Menu Items, Startup Items, and Preferences.
After doing that stuff and a restart, my desktop now looks the same as it did before the Clean Install and my applications, etc. are working like they did before too.
Is the problem fixed? I don't know yet. But from past experience I do know that once the HD "Data Lost" error starts appearing bad stuff starts happening really fast.
Als: Since installing OS 9.1 nearly a year ago, I have never rebuilt the desktop or reblessed anything. Was that a mistake? But this PowerBook just ran PERFECT better than when brand new!
Until 3 days ago....then BANG!
Did I follow the correct procedure? Any other suggestions for this eight year old PowerBook to keep it alive?
Thanks and I hope this helps others....
Wallstreet G3 Powerbook Series (1998) Mac OS 9.1.x 233 Hz; 20 GB HD (16 GB free); 288 RAM:

I have no expierence using a zip disk. I have always ran DW directly from the CD. Therefore, unknown if it would have made a difference.
The reason why IE froze could have been because it needed more preferred memory. The newer version needs approximately 300%.
If you were looking at a flash type site, those take up a lot of memory & can cause freezes if your browser does not have enough preferred memory.
Then again, you could have had directory damage. 5% is not much. You could have run Disk First Aid directly from your System Install CD that originally came w/your computer. Whatever, DFA can't repair, then that is when you pull out the heavy artillary (DiskWarrior, etc.).
I would just leave sleeping dogs lie for right now if your computer is running smoothly again.
I would also do a monthly maintenance by running DW & Plus Optimizor.
Rebuild your desktop after updating/upgrading an OS, running a 3rd party utility like DW, downloading & installations.
You really need a backup browser. The following is from Microsoft's website:
"Microsoft ended support for Internet Explorer for Mac on December 31st, 2005, and is not providing any further security or performance updates. As of January 31st, 2006, Internet Explorer for the Mac is no longer available for download from Microsoft."
Alternative OS 9.x Browsers:
Mozilla v1.3.1(Wamcom)
Netscape Browser Archive
Netscape v7.0.2
MacUpdate-NC v7.0.2
iCab v3
Opera v6.0.3

Computer hard drive fried, all data lost, how can I get my music library off my ipod touch and saved agian to another computer? no downloaded songs, all were cd's I put on it

computer hard drive fried, all data lost, how can I get my music library off and onto another computer? no downloads, just cd's I loaded on to it

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Java 1.4.2_03 WindowsXP The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

What is the Best way to extract a subset of data from a Production database

Hi,
One of our cleint want to to extract a subset of data from a Production databases in order to build a dev or test database. Since it is a banking sector they do not want to clone the db.
Can anybdoy suggests any tool or any info
Regards
Manoj

DataBee is one option. Depending on circumstances, you may also want their DataMasker utility in addition...
Of course, depending on your particular system and your particular requirements, this sort of thing can rather quickly get quite complicated since you may need very particular types of subsets of data...
Justin

Transferring data between two production servers

HI All,
I have read weblogs in transferring scenarios from Dev to Qual to Prod.
But I have a different requirement in which I have to transfer data from one production server to another production server without distrubing the first production server.
Say A and B are two production servers, I wanted to transfer data from A to B on daily basis.
Please give me some ideas on this....
Thanks
Veni

Hello,
I would suggest to use IDOC for transferring data (master \ transaction ) ... to do that you need to setup logical system (prod b) and RFC connection to connect to system prod b ...
Also distributional model need to setup for pushing the outbound idoc into RFC connection through receiver port.
Thanks
Krish

Data lost in Production

Similar Messages

Maybe you are looking for