Data - Manager Refresh Trigger Cell

I have a problem that my cell on A1 is the same as A2 !
So the cell should be triggered if the cells A1 and/or B3 are changing.
Is it possible or just one cell !

Hi,
Can you check once in the Behaviour of ocnnection wheather you have selected > Refresh when value changes ?
Or else you can try
Trig   AreaCode Number
1       1000         1000
2      2000         1000
3       3000         2000
add one more column and try to concatenate that column too
Trig are the hard coded value you can consider them as unique values such that everytime a new value is thrown to cell.
Hope you triggering works.
Even you can also try to take a refresh button from web connectivity and try to refresh the connection, sometimes it helps.
Let me know this info. helped you or not ?
Regards,
AnjaniKumar C.A.

Similar Messages

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Power Query/Data Management Gateway data refresh not working

Pretty new to o365/Power BI, but here's what I've got going on (hopefully someone can help me out):
I created a data management gateway and data source. The data source says it's online in the PowerBI admin center, and it seems to be working correctly. I can open Excel 2013 on my desktop (logging in as my trial o365 account which has Power
BI associated with it) and connect to the data source via Power Query using the oData option. I make sure to import the data into the model, and then open up the PowerPivot window and create a simple pivot table using the data in the model.
that all works just great. The problem comes when I upload the workbook and try to update it. I've tried a few different ways.
1. When I try to manually refresh the workbook by opening it in my o365 site and going to data-->refresh I get the following error:
      An error occurred while working on the Data Model in the workbook. Please try again.
      We were unable to refresh one or more data connections in this workbook.
      The following connections failed to refresh:
      Connection: Power Query - dbo_DimProductCategory
      Error: Out of line object 'DataSource', referring to ID(s) 'a75593f3-c34d-4f83-9458-49aa2cece164', has been specified but has not been used.
      The following system error occurred: Class not registered
      The provider 'Microsoft.Mashup.OleDb.1' is not registered.
      Power Query - dbo_DimProductCategory
2. When I go into Power BI and go to "Schedule Data Refresh" for the workbook, I get the following error:
      Sorry, the data connections in this report arenâ€™t supported for Scheduled Refresh.
      Technical Details â–¼
      Correlation ID: B3CE4B10-2137-E593-6FCF-189B73465190
      Date and Time: 03/31/2014 06:20:39 PM (UTC)
Any help would be greatly appreciated. If you need additional information, I'd be happy to provide it.

Hey Guy,
Thanks for the reply.
The "data source type" of the data source in Power BI is "SQL Server" (there was only that and Oracle available to select from)
The "data source type" that Power Query is using in Excel is "From oData Feed"....which is using the Power BI data source....which is using the data management gateway.
A few follow up questions if you have a second
1. Do you know when PowerQuery data refresh will be supported? (just a general idea....weeks, months, next year?)
2. Is there any other way to connect to (and be able to refresh) PowerBI data sources referencing "on prem" data via the data management gateway? I tried using the oData feed URL in non-PowerQuery areas of excel (excel data tab, PowerPivot directly)
but it didn't work. If there's some other way to connect to and refresh on prem data, i'm all ears :D
Really appreciate your help, thanks for taking the time.

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Using own SQLite DB in combination with Data Management

Hi,
Currently on a huge project we're we are using LCDS 3.1 in combination with a AIR 2.5 client.
I've been reading "Using Adobe LiveCycle Data Services ES2 version 3.1" and I have a question. In the chapter "Building an offline-enabled application" it says on the very first line:
"You can use an offline adapter with an AIR SQLite database to perform offline fills when a desktop client is disconnected from the LiveCycle Data Services server. An offline adapter contains the SQL queries for AIR SQLite for retrieving cached items like an assembler on the server retrieves items from the data source."
However, in my experience that AIR SQLite database is not just any DB but one that Datamanagment designs and generates itself, based on the Dto the DataManagement destination is managing. The offline adapter doesn't work like an assembler at all, because the documentation says you can only override the methods pertaining to constructing the WHERE, and ORDER BY parts of the queries, not the SELECT, CREATE, FROM,... parts.
In our case, we have a database on the server, constructed according to a very specific ERD, and we have a SQLite database on the client, also constructed according to a very specific ERD. What we want to do is execute every fill, create, update, delete against the offline cache and only synchronize with the backend when we want it the synchronize (technically possible by playing with the autoMerge, autoSaveCache, autoConnect,... properties). So what part of datamanagement can we customize to use our DB instead of a generated one?
Thx in advance!

You are correct in noting that Data Management does not allow you to use your own database to store offline data. This data is exclusively managed by the LCDS library for the developer. The intent is that the local cache is a reflection of the server data, not an independent copy.
If you have an existing database in AIR, then you will have much more direct control over the querying and updating of that data by using the SQLite APIs directly.
That being said, you can in essence replicate the data stored on the server, managed by Data Management, in the offline cache. In an upcoming release (winter 2011) we will have a few features ('briefcases' and a 'changes-only' fill) that will make this story even more compelling for your use cases. But even with the 3.1 functionality, you can do something like the following:
Perform a fill() to collect the data you want to have available on the client, save this in the offline cache
Construct an Offline Adapter Actionscript class that implements the fills you want to perform on the local data
Use the DataService.localFill() API to perform all of the client application fills, turn off autoCommit.
When the client is online, call commit() to store client changes and call fill() to refresh the cached data.
This should give you some ideas on how you could go about constructing your app to leverage the offline features of Data Services.
Tom

MDM Data Manager step-by-step process with an example

Hi All,
I recently started reading MDM. I am clear with MDM-Console concepts. But I have problem with MDM Data Manager. I am confused with data entries in qualified tables, work flows(using microsoft studio), Matching mode- rules(High treshold, low threshold) etc.. I read material posted in forums- but still I am not clear.
I need a step-by-step process for data entries with *examples*. A good example which covers all Data Manager concepts. PDF's with screen shots, videos any thing would help.
Please help me......It would be of great help.
Thanks in Advance.
Suchir

Hi Suchir ,
MDM 5.5 has 4 MDM clients to perform 4 main functionality on the MDM master records.
- Console- This is where all the Administrative work is performed
- Data Manager- This is where the actual maintainence work is done on the master data like consolidation deduplication etc.
- Import manager- Thsi is from where the source matser records are taken into MDM repoistory
- Syndicator- This is from where teh consolidated master data is send back to the target systems.
MDM Data Manager is the heart of MDM
The activities that can be performed in the MDM Data manager are:
- Data Consolidation
- Data Validation
- Data Deduplication
- Data Assignment
- Data Governanace
etc......
Qualified Table:
- Qulaified tables are used to store relational records where one field value is determining the other field or fields value.
- Qualified tables are maintained in Console and can be viewed in Data Manager
- Qualified Table are viewed under a separate section in Data Manager in the right hand side.
- Qualified table has Non qualifiers and Qualifiers.
- Non qualifiers can be seen in the Qualified table and in the linking Qualified field
- Qualifiers can be seen separately under the Qualified section in the data manager
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00a15239-684e-2b10-b8ae-b936b7d1c1fe
Workflows
- Workflows are designed in MDM for Governanace
- You can create the MDM workflow using the MS Visio 2003 stencils in the MDM Data manager in the record mode under the workflow table
- The saved workflow in DM can then be executed either mnaully or automatically based on teh trigger actions
- The trigger action for teh MDM wf are record Add,Update,Import,Manual
Kindly refer the below link to know more on this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167 (MDM Workflows Overview)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90990743-91c0-2a10-fd8f-fad371c7ee40 (Demo of MDM Workflows)
Matching Mode
- This mode is exclusively for Master data deduplication
- We need to create Rules,Strategies,Transformation in MDM data manager in teh record mode
- Then you need to run these strategies on the selected records
- Based on your score and threshold set in the strategy MDM will identify duplicate records
- This score will be seen in teh Matching mode
- Colour coding is used along with scores to find out dupliactes
- Green - 100%dupliacte Blue- 50?% Red- No duplicate
Kindly refer the below link to know more on this:
/people/michael.reil/blog/2006/05/18/mdm-matching-strategies-for-master-data-consolidation (matching merging in mdm)
Hope It Helped
Thanks & Regards
Simona Pinto

No data to refresh in BPC clients with Russian regional settings

Hello, colleagues
I hope to get some advices and information about saving data in BPC client computers with non-English regional settings (e.g., decimal point is set ","). Our BPC server has English regional settings.
BPC 7.0, SQL Server 2008. I created new Input Schedule by using standard EVDRE function. And data was not sent to SQL Server after clicking Send and Refresh, I got the message "No data to refresh". I examined hidden sheet EVDRE_DATACACHE and found cells in row A with cache data in XML format. After some experiments I found out that if all data values will be replaced with symbol "S" then all data in the sheet with EVDRE could be saved correctly. I don't know any other methods to make data with decimal point "," to be saved. Also I tried to change members of Measure (Periodic - YTD) but i got the same result.
Thanks for your help.

Actually you have the problem into server.
I think you have the regional settings wrong into server.
We have actually many customers using French, German, Dutch language having "," for decimal separator and it is working fine.
It is not working when actually the settings into the server are not English US.
Please check the follow keys from application server:
HKEY_USERS - .Default - Control Panel - International
HKEY_USERS - S-1-18.. - Control Panel - International
HKEY_USERS - S-1-19 ..- Control Panel - International
HKEY_USERS - S-1-20 ..- Control Panel - International
HKEY_USERS - S-1-21..- Control Panel - International
HKEY_USERS - S-1-21........ ..- Control Panel - International
These keys should be sett all for english US. If it is at least one not correct that can cause problems with sending data.
Regards
Sorin Radulescu

Data Manager not running scripts

Dear Experts,
I've followed one of the "How to pass parameters to BPC scripts" guide and created a Process Chain to run scripts. The whole thing didn't go as smooth as expected and I'm not sure which part went wrong.
As I'm having trouble validating the complex version of codes. I wrote something very simple instead like
*XDIM_MEMBERSET AcctDetail=Non_AcctDetailInput
*WHEN ACCOUNTPLAN
*IS "SSVV060"
*REC(EXPRESSION=%VALUE%,P_DataSrc="INPUT")
*ENDWHEN
*COMMIT
I ran the package, the package should trigger the process chain. but it never showed itself in the package status like it's never ran once at all.
I'm posting my script problem on another thread.
anyone has an idea? Thanks a million...
, Jim Hsu

Please check your task profile....
Make sure you have all task profile related to data manager....do let us know if youstill face this problem

Export to Excel: Row Auto Height Removed on Data Connection Refresh

Hi all,
When I perform a Data Connection Refresh on an Excel workbook exported from SharePoint it removes the row auto height I had in place, hiding valuable information. This is an additional column I added to perform some calculations.
Any ideas?
K.
Personal Blog: http://thebitsthatbyte.com

Hi Kelly,
As I understand, you have a SharePoint list and click export to Excel under List tab. Then the list is exported to Excel spreadsheet.
Generally speaking, all field column width and height keep in the same size when the list is exported to Excel. In Excel, under PAGE LAYOUT tab > Scale to Fit, make Width and Height to be Automatic and Scale to 100%.
Then the cell should be good. If there is some column still exceed the width of Excel cell, please right click the cell > Format cells > Alignment > Text control, click Wrap text to increase the cell size to fit the text, or click Shrink to fit
to shrink the text.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Vi/data managment

Hi all.
2 years ago I graduated and 1year aog I started developping a typical stimulus-response set-up for behavioural neurofysiological experiments in LV, without knowing anything about LV (or programming in general). I'm a pretty quick learner however, and today, the set-up (1 stimul pc, 1 control (LV) pc and a dsp all connected through tcp/ip) is used intensively in our lab, although i'm stil debugging/developping new features for it constantly,
I'm getting managment problems however, a few examples: the dsp sends everything it samples (now 3channels @ 20kHz) to LV in blocks of 200samples, for saving to disk and display). At the same time it sends/receives control commands to/from the stimul pc and eventually from other pc's on the internal network.
When the system is running for a long time, the LV display can suffer from delays up to 10seconds. eg i stop execution on the dsp, but the LV display keeps on going for 10seconds displaying data.
Also, every time the histograms get updated, the main vi's display freezes for half a second.
Sometimes it takes way too long before LV (or is it windows? I don't know how the tcp/ip is handled) reads the tcp/ip data, what results in crashing the dsp (I'm at the edge of cpu usage there) which is the worst that can happen because the experiment has to be stopped then.
After reading up a bit on data managment etc, I easily figured out my vi probabely is one big mess that would scare most programmers away (I cannot post it for internal reasons, but I posted the fp of the vi unning a test so you can imagine there's a lot behind it.) Since the vi is still growing every day, I don't have much time to refactor it completely, but I feel I have to do something or I will get lost in the future (we're planning to go to 16channels which all have to be saved to disk by the vi, later it will be 100 channels, all containg brain activity)
So I have some questions I'd like to be answered by more experienced users so I can get some ideas for a new implementation.
Currently, I have 4 while loops containing tcp readers. 3 of them also display the data received and write it to file.
The writing is buffered however, eg first filling a shift register with 10000 samples, then post an event and pass the data through the event to another loop writing it to disk. Would it be better to store the data in a local/gloabel, common between the two loops, and just set an event to warn the scond one? Or is the queueing system better (haven't looked at it yet)? Same question goes for getting the data from the main vi to the histograms, I do this with a global event.
For the displaying, not every single point is displayed (because screen refresh rate is way slower then data rate), but would it benefit putting the display in a seperate loop and use events/... to pass data?
Also, I use like 100 local variables that have to be commonly accessible between the several while loops I have running, I've read locals aren't that efficient, but i see no other solution for it?
The squares on the eye/spike displays you see in the attachment, can be positioned/resized by the mouse, i have seperate while loops for that, recalculating the position every 100mSec depending on zoom etc, every display on the fp is a layer of several pictures/graphs. So the updating of the layers is never synchronous (eg displays data every 20mSec, but the squares every 100mSec), is this a drawback or does LV automatically sync it since it can only display at refresh rate anyway?
Almost every user input (menu/buttons) is handled through events, so I have 3 while loops with an event structure, each handling 20events with sometimes lots of work in it. Is a system with event handling, then passing it to a task handler or so preferable and why?
And is every while loop in LV running in a seperate thread?
I have several more questions, considering things that look fundamental LV stuff to me. Maybe I should follow a course? but I doubt there's a course focussing on all my problems. Or should I get a private teacher somewhere? :-]
Thanks for reading this little book, and thanks in advance for any answers!
Stijn
(LV 7.0, very clean win2k system on a dual xeon 3Ghz 1gb ram dual screen dell, i get up to 60%cpu usage during experiments, most of it kernel time)
ps very important note for dual nvidia screen users: do *not* use dual display, only horizontal span, or windows will eat all your kernel time while running eg vi's, hence slowing down everything really, really bad. Horizontal span is better since then windows thinks it's one (huge) screen only. It took me weeks to figure out why my vi couldn't read/display all data in time, well, it could, but it was just waiting for windows to do freaky secret stuff with my display driver.
Attachments:
VI.zip ‏755 KB

Hi Stijn,
First of all, there is a specific course, called the LabVIEW Intermediate I course, that discusses these issues. This course has been created for customers that want to write professional and large applications.
There is a course scheduled in Belgium the 29th of August, btw.
I have one big tip actually: Seperate your User Interface handling from the data processing and put them into separate parallel loops.
Use the Producer/Consumer Design Pattern with Events (template in LabVIEW). Use the Queue VIs to make sure that no event on the User interface is lost and use User events to communicate back to the User interface loop.
Queue your data coming from the TCP/IP communication. Use separate loops to split-up the acquisition of your data and the processing of your data. Master/Slave designs are ideal for this. Queueing will make sure that that you don't lose the data while processing. Make sure that none of the loops are blocked by shared resources. For example, make sure that the acquisition loop doesn't have to wait for the processing loop to finish because there is a shared resource between the loop. Queues don't have that problem.
Locals can create "race conditions". They also create a copy of the data which is memory intensive. Alternatives for locals are Queue Vis or Notifiers. (Check the design templates in LabVIEW). You could also use "functional globals". These are VI's that replace the normal global variable by a state machine that has a "get data" and a "set data" state and where the value is stored in the "shift register".
Multithreading ---> Check the link below:
http://zone.ni.com/devzone/conceptd.nsf/webmain/D2E196C7416F373A862568690074C759
Most of your questions are handled by the Intermediate I and Intermediate II course.
Regards.
JorisV
TL AE
NIBE

Data Manager prompt

BPC 7.5 NW SP11
Question: Can i have the data manager prompt give parent node selection by default instead of only base members
I have product dimension with ProductLine as parent node and Product Item as base member. In one of our process we have a BADI which takes the Product Line and does amount calculation for all the Product Items underneath it.
My current setup is in the data manager package have a prompt for Product dimension selection. User has to select the Product Line but when the dimension selection opens it by default opens with CALC=N filter which makes the selection only on Product Items. User has to remove the filter, refresh and then select the correct Product Line parent node. Once this is done, the script logic just calls the BADI and in BADI we read the dimension selection. so it goes smoothly.
But users are making frequent mistake by selecting the Product Item (shown default) instead of Product Line(parent), understandably so.
Main question: Can i have the prompt show the parent nodes in selection (custom filtered based on property Product Type ="PL")
What alternatives you may have taken for this situation.
Product Line
--- Product Item1
--- Product Item2
--- Product Item3
~ Dilkins

Hi Andrew,
The script looks absolutely fine. It should have worked fine. You just don't need the INFO statement.
Please refer to the below links from help.sap:
SELECT:
SELECT Prompt() Command - SAP Documentation
SELECTINPUT:
SELECTINPUT Prompt() Command - SAP Documentation
As per the link also, SELECT is for all the members, whereas SELECTINPUT is for non-calculated members.
Can you please share the screenshot of the screen where the member needs to be selected.

Data records rejected while using Data Manager Packages

Hello all ,
We have configured the dimensions and applications in SAP- BPC 7.5 NW. However , while loading the data into the application using a data manager package , all the records are rejected. The following is the error :
Line 3 :Dimension: P_CC member: SALESTEAM1 is invalid or is a calculated member
Line 3 :Dimension: PRODUCT member: PRODUCTA is invalid or is a calculated member
However , these member are present in the dimensions and are processed as well !! Any help is appreciated .
THanks
Vijay

The message seems to be saying you have a dimension forumula defined for those two cost centers. Please check your dimension members master data and make sure there is nothing defined in a property column called "Formula" for those two members. If there is something populated, then delete the cell contents and save and process your dimension. Then try your data manager load again.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Search for [Remote Key] and [Remote System] in Data Manager

Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?

Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok

Error while opening MDM Data Manager

Hi,
We are getting the following error while trying to open Data manager on our repository.
"Error Initializing Attributes for table Taxonomy
Application will exit
Already exists"
mds Version 5.5.42.90
MDM DataManager Ver5.5.42.90
The repository loads without any errors. The server log file too doesnt show any errors.
Is there anyway to fix this?

Go to your MDM console, Login to repository and Unload repository first.
Then load with Update Indices.
This problem comes when you change anything in schema in console and then load repository with immediate option.
So always prefer to use update indices as accelator files will get updated and data comes from actual database.
If the problem still persists then Go again to console and check your repository for any fatal error. if errors come then repair repository and if not come then also repair.
Then load with update indices.
Hope it will help you.
BR,
Alok
Edited by: Alok Sharma on Feb 14, 2008 9:20 AM

Data - Manager Refresh Trigger Cell

Similar Messages

Maybe you are looking for