Data Manager : SQL Update Error

HI Gurus,
In Data Manager,
we are trying to execute assignment on 900 records at once, assignment working fine when we split it in to 300 inbatch, but it gives assignment execution failed : SQL Update error, while we execute on 900 records in a streach. we are wondering what causes this error when it is executed more than 400 records. please through some lights on this.
Note: Assignment got one IF conditon , IF (expression,value), here expression got <conditon1> OR <condition2> OR <condition3>...... OR <Consition35>
Thanks in advace

Hi,
I feel you are getting this error because the assignment which you are trying to execute is little complex, and database does not have sufficient resources at that point to execute the SQL statement. I feel,  this will be happening on irregular basis.
Please check below document for more details about cause and actions (page no 210)
[IBM DB2 Universal Database Message reference|ftp://ftp.software.ibm.com/ps/products/db2/info/vr5/db2m0e50.pdf]
Best Regards,
Shiv

Similar Messages

  • Error handling for master data with direct update

    Hi guys,
    For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
    But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
    Many thanks,
    / Christian

    Hi Christian -
    Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
    second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
    hope it helps
    regards
    Vikash

  • Unable to refresh SQL Server data source through Data Management Gateway

    I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
    This is the error I obtain:
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
    I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
    I correctly created the data source in admin panel following instructions in Release Notes, and
    test Power Query connection is ok.
    Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

    I made other tests and I found important information (maybe there is a bug, but read the following).
    The functions DateTime.LocalNow and DateTime.FixedLocalNow
    work correctly, generating these statements to SQL Server:
        convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
        convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
    The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
    DateTimeZone.LocalNow, and DateTimeZone.UtcNow
    stop the scheduled refresh with the error I mentioned
    in my previous messages, generating these statements to SQL Server:
        '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
        '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
        '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
        '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
    I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
    Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

  • Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

    Hi
    We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    this is the log:
    +---------------------------------------------------------------------------+
    Purchasing: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    POCISO module: Create Internal Orders
    +---------------------------------------------------------------------------+
    Current system time is 26-JUL-2013 09:21:09
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Begin create internal sales order
    Updating Req Headers
    14 Reqs selected for processing
    Top of Fetch Loop
    Source Operating Unit: 82
    Selecting Currency Code
    Currency Code : MXP
    Selecting Order Type
    Order Type ID:1001
    Selecting Price List from Order Type
    Deliver To Location Id: 196
    Inserting Header : 3908784
    Getting the customer id
    Getting the customer id: 15334
    Unhandled Exception : ORA-01403: no data found
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    78
    Output is not being printed because:
    The print option has been disabled for this report.
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 26-JUL-2013 09:21:14
    +---------------------------------------------------------------------------+
    Some suggestion for resolve it??
    Thanks & Regards.

    In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
    When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
    If yes, please let me know the path and command to set the kernel value.
    Thanks
    Amith

  • Error while opening MDM Data Manager

    Hi,
    We are getting the following error while trying to open Data manager on our repository.
    "Error Initializing Attributes for table Taxonomy
    Application will exit
    Already exists"
    mds Version 5.5.42.90
    MDM DataManager Ver5.5.42.90
    The repository loads without any errors. The server log file too doesnt show any errors.
    Is there anyway to fix this?

    Go to your MDM console, Login to repository and Unload repository first.
    Then load with Update Indices.
    This problem comes when you change anything in schema in console and then load repository with immediate option.
    So always prefer to use update indices as accelator files will get updated and data comes from actual database.
    If the problem still persists then Go again to console and check your repository for any fatal error. if errors come then repair repository and if not come then also repair.
    Then load with update indices.
    Hope it will help you.
    BR,
    Alok
    Edited by: Alok Sharma on Feb 14, 2008 9:20 AM

  • Open Delivery value update error in credit management

    Hi
    We have credit management active at delivery level. The value of open deliveries is not getting updated correctly for items with material substitution (material determination). For all other items, its getting updated correctly.
    E.g Let say the credit limit set in FD32 is 10000 and the credit limit used % is 98 and the credit exposure value is 9800.
    Now when I create an order with qty 10 for mat A, it creates a sub item B due to material determination and the value of the item is Rs.1200. In our system, the sub item with TAPS item category is relevant for pricing.
    Then I create a delivery in VL01N and save it.
    Now if i check in FD33, the credit limit used should be 101% and the credit exposure value should be 11000, but its not updating the open delivery value correctly. Its not considering the value of the new delivery.
    However, If I add a normal item (TAN) in the same sales order and create a delivery for that item and save it, its updating the credit exposure based on the value of the normal item in the delivery correctly.
    How to make the system update the open delivery values correctly by taking the items with material determination also into account.??
    Please advise if any specific settings need to be done.
    Regards
    Madhu

    Hi,
    the system updates open values for credit management. These are:
    Open sales order credit value (S066-OEIKW)
    Open delivery credit value (S067-OLIKW)
    Open billing document credit value (S067-OFAKW)
    The system updates the open values in standard SIS structures S066 and S067. Technically, the structures are transparent tables. You can display the contents using transaction SE16 or using table maintenance.
    The S067-OLIKW will give the open delivery credit values credit.Check in you system whether this table is updated with the delivery values for the credit account(customer number)
    RVKRED77 u2013 Reorganize SD credit data
    When updating errors occur, it enables you to reorganize the open credit, delivery and billing document values.
    If the table is not updated run this report in background.
    Regards,
    Saju.S

  • Error while exporting data from sql server to excel

    Hi,
    I am trying to export data from sql server to excel.
    The query that I used is s follows
    INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
    select 
    column1,column2.... from Table1
    I get the following error message while doing so..
    String or binary data would be truncated.
    The statement has been terminated.
    One of the column's holds data more than 225 characters.
    What is the way to correct this, i want the whole data of the colum in the excel sheet.

    I haven't had great luck with the INSERT INTO OPENROWSET method.  Can you try one of the many samples from one of these 3 links?
    http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code 
    http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
    https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • Error while reversing data from SQL Server to ODI

    hi,
    I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
    And now, I am getting the below error while reversing the data from SQL Server database.
    0 : 08001 : java.sql.SQLException: No suitable driver
    Looking for the assistance on the same.
    Thanks,
    Abhay

    If everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
    also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables.

  • Service manager console can't connect to Service manager data warehouse SQL reporting services

    When I start Service manager console, it gives this kind of error:
    The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
    console and re-open to view reports.
    Also in EventViewer says:
    cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
    at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
    at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
    at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
    at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
    We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has  been worked on last week without the SPNs.

    On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
    This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
    Andreas Baumgarten | H&D International Group
    Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
    The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
    The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
    This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
    Ensure that the target SPN is only registered on the account used by the server.
    This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
    Ensure that the service on the server and the KDC are both configured to use the same password.
    If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
    or use the fully-qualified name to identify the server.
    I can access the website directly from the server which hosts Reporting Services.
    Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

  • Error when Trying to Copy or Import Data via Data Manager

    Hello Experts,
    I was trying to do an Import using the package in Data Manager and i Got this error:
    [Admin-ProcessPartition]Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactAppname', Column: 'ACCOUNT', Value: '7061020702'. The attribute is 'AccountNom_ID1'
    Also, I tried to do some Optimize in the Application and then a Copy from a Package and I still got this error.
    Thanks for your help,
    Rodrigo

    Hi Rodrigo,
    For every application, BPC creates 3 tables in the SQL.
    1. FactWB<application> : writeback table - the data is stored whenever we send any data from the input schedules. This table is used for real term storage (the most current data sent to the system).
    2. Fact2<application> :  When we load data through DM packages, it gets stored in this table. Also called short term storage.
    3. Fact<application> : Main data storage. All data eventually resides over here. Also termed long term storage.
    Hope this helps.

  • Native SQL Update statement error when more than one field used

    Hi, I would make it simple. I update directly to a SQL server.
    1-
    When I update only one field works.
    LOOP AT IT_MAT.
    EXEC SQL.
    UPDATE Articulos SET PrecioSinImp = :IT_MAT-PRECIOSINIMP        WHERE Modelo = :IT_MAT-MODELO
    ENDEXEC.
    ENDLOOP.
    This give me sy-subrc = 0
    When I Try to update several fields doesnt works, any would can help me ?.
    LOOP AT IT_MAT.
    EXEC SQL.
      UPDATE Articulos SET PrecioSinImp = :IT_MAT-PRECIOSINIMP
                           Descripcion = :IT_MAT-DESCRIPCION
      WHERE Modelo = :IT_MAT-MODELO
    ENDEXEC.
    ENDLOOP.
    This give me dump SQL error 170.
    2- BTW, I have to leave this report program in a job so the data would be updated once a day in a job, so I have to update the existing data and add new one.
    I Was thinking doing something like this.
    LOOP AT it_table.
    UPDATE DQL TABLE
    IF sy-subrc <> 0.
    INSERT DQL TABLE
    ENDIF.
    ENDLOOP.
    This may works ??? because if this not work, I have to select single each one of the data in the SQL table, if it was founded UPDATE otherwise INSERT. And I dont like this aproach.
    Thx

    Hi Rodrigo,
    I feel that your requirement is as below:
    Depending on the criteria in the where clause, check whether the record exists or not.. If it does, then update the record with new values, else, create a new record..
    You can do the same as below:
    LOOP AT it_mat INTO e_mat. (e_mat of same structure as it_mat)
    MOVE : xxx TO e_mat-yyy... and so on (Only change the non-key values)
    MODIFY dbtable FROM e_mat.
    ENDLOOP.
    This code will create a new record if a record with the given key values in e_mat is not found, else, it will update the existing record with the new non-key values in the structure e_mat.
    Thanks and Best Regards,
    Vikas Bittera.
    <b><REMOVED BY MODERATOR></b>
    Message was edited by:
            Alvaro Tejada Galindo

  • What's the best MS SQL tool(s) for managing (creation, updating, deletion, pausing, starting, etc) a bunch of replicated databases?

    I'm looking for recommendations on how best to program (scripts, procedures, anything else) managing a set of databases across multiple datacenters. The tasks I would like to be able to do database by database is...
    copy a specified database from one server to another ("import") without the user access rights
    add replication to the "imported" database objects based on an extended property
    update the replicating "imported" database, including changes to the data values, and changes in schema, without bringing down the database (rolling updates across the various datacenters is permitted)
    adding/modifying a standard set of maintenance plans for each Database
    removing replication from a selected database
    I'm familiar with the standard SQL product but have no exposure to the other SQL components like SSIS. I have to date several SQL batch scripts that do parts of the above but it seems there must be a better way. Assume that there is one Enterprise Edition
    SQL instance at each datacenter. Replication is transactional Peer 2 Peer. We are also considering if we want to add DB mirroring but have decided not to do so at this time.
    BTW I'm one of those people that can't get the "copy database" menu option in SSMS to work. I'm not a DBA but it looks like I'm going to need how to act like one.
    Developer Frog Haven Enterprises

    I would recommend you to get involve DBA for any such tasks. The task which are listed it's not going to be simple thing. If you don't have prior experience in High availability configuration, it's really difficulty to manage even if you've any third party.
    But you can rely on backup and restore for any third party tools.
    To manage database ,configure  and maintain HA you need to have SQL Server HA knowledge.
    My testing so far seems to show that it's quite easy to break the replication with changes
    to the databases. Using SSMS "canned" wizards and procedures to delete and recreate replication leaves many vestiges behind cluttering up the database instance.
     You can create a script to cleanup the replication and re-create it from the scratch
    http://www.mssqltips.com/sqlservertip/1808/sql-server-replication-scripts-to-get-replication-configuration-information/
    http://support.microsoft.com/default.aspx?scid=kb;en-us;324401
    --Prashanth

  • Data Warehouse SQL error log shows failed login

    In addition to the above title, on our management servers (x2 Win 2012 R2 - SCOM 2012 R2), I am seeing the event ID 31551 stating:
    Failed to store data in the Data Warehouse. The operation will be retired. Exception 'SqlException':Login failed for user 'xx'.
    One or more workflows were affected by this.
    Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange
    Instance name: management server
    Instance ID: {xxxxxxxxxxxxxxxxx}
    Management Group: XXXX
    I've logged onto Data Warehouse server using the account referenced in the error message, loaded SQL Management Studio (2012 Std), and logged in and am able to see, view tables within the OperationsManagerDW database. So I'm trying to establish what's going
    on! If I can access the DW DB using the account, why am I getting these errors?

    Hi
    Unfortunately, this hasn't resolved the issue. I've ran the query DBCC CHECKIDENT ("EventChannel"); and have got the following response back: 
    Checking identity information: current identity value '1', current column value '1'.
    DBCC execution completed. If DBCC printed error messages, contact your system administrator.
    I've revisited the run as account for 'Data Warehouse SQL Account' - this is a domain account. I've checked the Data Warehouse DB and can confirm that it's got write access over the database. I'm using the same account as the 'Data Warehouse Action Account'.
    However, the SQL log on the data warehouse server is saying failed login, see below:
    Login failed for user 'sv-scom-dw'. Reason: Could not find a login matching the name provided. [CLIENT: Management server 1 IP]
    I've checked the 'Management Group' table and can confirm the WriterLoginName is DOMAIN\sv-scom-dw
    However, the SQL error looks like it's looking for a local SQL login. The database is set to Mixed mode authentication.
    Any ideas?

  • E not assigned Error when running Data Manager

    Hi,
    When I try to import Master Data from BW to BPC, All the ID's are loaded correctly, however I get an error message that :E not assigned when I run the Data Manager even though I have the Language set to "E".
    Any inputs are appreciated.
    thanks,
    Vamsi.

    HI Vamsi,
    I am facing similar problem,please update me if you have any clue about this.
    Thanks,
    Bala.

  • Error openin configuration of Master Data Serice SQL 2012

    Hi,
    after installation of Master Data Services (SQL 2012 EE) I can't open Configuration Manager because of error:
    "An unexpected error occured: Could not find file 'C:\Windows\assembly\GAC_MSIL\Microsoft.MasterDataServices.Configuration\11.0.0.0__89845dcd8080cc91\Microsoft.MasterDataServices.Configuration.InstallState'.."
    already tried to run repair but no sucess
    how repair that ?

    Hi MariuszBu,
    Have you got any error/warning information during install Master Data Services in your environment. Based on the error message, it seems that the Master Data Services didn't install successfully.
    Please try to reinstall Master Data Services to see if this helps.
    Uninstall and Remove Master Data Services:
    http://technet.microsoft.com/en-us/library/ff487065.aspx
    Install Master Data Services:
    http://technet.microsoft.com/en-us/library/ee633752(v=sql.110).aspx
    Regards,
    Elvis Long
    TechNet Community Support

Maybe you are looking for