E not assigned Error when running Data Manager

Hi,
When I try to import Master Data from BW to BPC, All the ID's are loaded correctly, however I get an error message that :E not assigned when I run the Data Manager even though I have the Language set to "E".
Any inputs are appreciated.
thanks,
Vamsi.

HI Vamsi,
I am facing similar problem,please update me if you have any clue about this.
Thanks,
Bala.

Similar Messages

Error while running data manager package

Hi All,
when i am running data manager package for currency conversion i am getting the following error
"An exception with the type CX_SY_CREATE_DATA_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
The data object could not be created: The type /B28/MHED7W9U does not exist."
Plase suggest where i am making mistake.
Thanks

Below are our BPC versions:
BPC on Server Manager: 5.0.486
Data Manager from eData: 5.0.484
BPC from eTool: 5.0.486
Below is the total error message as per your suggestion to run Export package. (even with service account which we used to install the software we are getting same error message.)
TOTAL STEPS 2
1. Dump Data: Failed in 0 sec.
[Selection]
FILE=\ApShell_SK\FINANCE\DataManager\DataFiles\SKTEST.TXT
TRANSFORMATION=\ApShell_SK\FINANCE\DataManager\TransformationFiles\System Files\Export.xls
MEASURENAME=PERIODIC
(Member Selection)
Category: ACTUAL
Time: 2006.JAN
Entity:
Account:
DataSrc:
IntCo:
RptCurrency:
[Messages]
An error occurred while executing a package.
Package Error Events:
ErrorCode = -1073668060
Source = Dump Data
SubComponent=
Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC}

Error while running data manager

Hi
If I run the copy function in the data manager I am getting this error.
"[Errcheck] An error occured while checking an error from webservice. 91: Object reference not set to an instance of an object."
What should I do now ?
Thanks and Regards
Vijay

Hi
i think you need to define the source and the destination properly
if you will copy 2 accounts in only one account you need to specify twice the destination account
example
source destination
account1,account2 account3,account3
Regards
CSD

SAP BPC 7.0M SP7 can not be able to run Data Manager packages by admin user

Can not be able to run DM packages by admin user with full access rights in security?
please suggest any solution ASAP please?

Hi There
Have you ensured that the user has the Data Manager Execute task right ?
Have you tried to process the security of the users again?
If the user is a part of a team, have you tried to assign the task access specifically to that user ?
Hope this Helps
Kind Regards
Daniel

'File is not open' error when running DTP for flat file upload in BI

Dear Sir,
We are trying to upload master data from flat file for which we have
created respective DTPs. When we are running the DTPs we are getting an
error saying 'The file '&&filepath&&' is not open'. We also checked
that the file is not open, but still we are getting this error. Could
anyone please suggest what we have to do to solve this problem.
Many Thanks
Narendra

Hi,
I am currently facing the same error "Error in Source system". "The file 'path' is not open".
Could you please let me know how you resolved this issue.
many thanks.
Regards,
Madhusudhan

Namespace not found error when creating data server for xml with namespace

Hi
I tried creating XML data server in ODI with namespace in xml file. I followed the below steps but could not success in creating the dataserver. however when I remove the namespace in xml file I am able to reverse engineer the xml file.
1) Create xml data server
2) select xml driver - com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
3) Provide the jdbc url - jdbc:snps:xml?f=D:/xmlnew/sample_namespace.xml&s=xmlns&d=D:/xmlnew/sample_namespace.dtd
xml content
<f:root xmlns:f="http://www.w3.org/TR/html4/">
<table>
<name>African Coffee Table</name>
<width>80</width>
<length>120</length>
</table>
</f:root>
DTD content
<!ELEMENT f:root ( table ) >
<!ELEMENT length ( #PCDATA ) >
<!ELEMENT name ( #PCDATA ) >
<!ELEMENT table ( name, width, length ) >
<!ELEMENT width ( #PCDATA ) >
when I test connection it shows the following error.
java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:389)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:421)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.<init>(SnpsXmlDTD.java:150)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchema.<init>(SnpsXmlSchema.java:478)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.createNewSchema(SnpsXmlSchemaManager.java:292)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.getSchemaFromProperties(SnpsXmlSchemaManager.java:270)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDriver.connect(SnpsXmlDriver.java:114)
     at oracle.odi.jdbc.datasource.DriverManagerUtils$DriverProxy.connect(DriverManagerUtils.java:23)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:368)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:352)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:316)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:275)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:99)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)

Hi,
Thans for your reply.
This is the DTD for my xmldoc.
<!ELEMENT Data (Department+)>
<!ELEMENT EmployeeID (#PCDATA)>
<!ATTLIST EmployeeID col (EMPID) #IMPLIED>
<!ELEMENT Education (EmployeeID, Sequence, Dgree)>
<!ATTLIST Education table NMTOKEN #IMPLIED>
<!ELEMENT Employee (EmployeeName, EmployeeID, DepartmentID, Education*)>
<!ATTLIST Employee table NMTOKEN #IMPLIED>
<!ELEMENT EmployeeName (#PCDATA)>
<!ATTLIST EmployeeName col NMTOKEN #IMPLIED>
<!ELEMENT DepartName (#PCDATA)>
<!ATTLIST DepartName col NMTOKEN #IMPLIED>
<!ELEMENT Table (Column+)>
<!ATTLIST Table importType NMTOKEN #IMPLIED>
<!ATTLIST Table parentTable NMTOKEN #IMPLIED>
<!ATTLIST Table tag NMTOKEN #IMPLIED>
<!ATTLIST Table columns NMTOKEN #IMPLIED>
<!ATTLIST Table name NMTOKEN #IMPLIED>
<!ELEMENT DepartID (#PCDATA)>
<!ATTLIST DepartID col NMTOKEN #IMPLIED>
<!ELEMENT MetaData (Table+)>
<!ELEMENT Sequence (#PCDATA)>
<!ATTLIST Sequence col NMTOKEN #IMPLIED>
<!ELEMENT Dgree (#PCDATA)>
<!ATTLIST Dgree col NMTOKEN #IMPLIED>
<!ELEMENT Export (MetaData, Data)>
<!ELEMENT DepartmentID (#PCDATA)>
<!ATTLIST DepartmentID col NMTOKEN #IMPLIED>
<!ELEMENT Column (#PCDATA)>
<!ATTLIST Column deleteKey NMTOKEN #IMPLIED>
<!ATTLIST Column isKey NMTOKEN #IMPLIED>
<!ELEMENT Department (DepartName, DepartID, Employee+)>
<!ATTLIST Department table NMTOKEN #IMPLIED>
Thanks again!
Yan

Shell Commands not found error when running application

Hello,
Im using MonoDevelop IDE in my Mac, before it used to work fine but after few days, now when I'm opening the application nothing happens., i checked the Console for the log and it says this
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 17: dirname: command not found
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 31: //mono-version-check: No such file or directory
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x52052].com.ximian.monodevelop[1510]): Exited with code: 1
I thought may be some error with the "dirname" command, so i commented it in the code and gave the path of directory myself and then the console shows up like this.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: grep: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 20: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 21: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 22: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 31: osascript: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: Cannot launch MonoDevelop
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: MonoDevelop requires the Mono Framework version 2.10.4 or later.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x56056].com.ximian.monodevelop[1532]): Exited with code: 1
I opened the contents of the application and run the shell script for opening aplication there it worked very fine and application started working.. But if i open application directly through launchpad or finder it doesnt show up and console
I tried running those commands in the terminal directly there they work.. But dunno whats wrong in here. and even if try to open the application through the terminal it all opens fine.. what could be the possible problem, is it with my mac..?

i finally figured out the problem.. it is with the environmental variables. the path for all those commands like "grep" is not being set for the GUI applications. that is why i got that error.
for those GUI applications which require path, we have to set path in the file /etc/launchd.conf the environmental variables set in here are used by the gui applications and those which are launched through spotlight.
that file may bot be present in most of the macs. No problem even if not present,we can create one and use.
so type in terminal
$ sudo vi /etc/launchd.conf
and in the editor add these lines
setenv PATH = /new/path
and save. Note: replace /new/path with the path which you need to have for the commands used in the script.
remeber that you need to restart your mac for applications to use these environmental variables.

Error when running incident management

Hi,
We have problem with incident management web interface.
When we open support messages "in Process" or others we get error
Some information of error below:
Note
The following error text was processed in the system ESM : Adaptererror in TRANSPARENT_CONTAINER "TCO_LONG_TEXT" of view "AGS
CCINCIDENT_DETAILS.V_PREVIEW": The CS length specification in property"IFUR_NW7_SCROLLCONTAINER~WIDTH" contains invalid characters
The error occurred on the application server sapesm_ESM_20 and in
the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program
/1WDA/C7STANDARD==============CP
This happened after we change size of window.
we made a mistake in setting the height.
Any body have a solution for resolve this error?

I would suggest to open a message on component BC-WD-ABAP or SV-SMG-SUP.
Ruediger

HTTP 404 Not Found error when opening Enterprice manager in ORACLE 10g

Hi friends,
I have created a new database. When i tried to enter into the enterprise manager through the URL http://localhost:7778/em it displays the following error
"HTTP 404 Not Found"
Someone please help me

That is because you are using the wrong port number. AFter installation, it showed you the correct port number for you installation. If not find it in $ORACLE_HOME/install/portlist.ini

Error when running Application Manager

I keep getting this error "
Extension Manager 6.0.5 Update
Installation failed. Error Code: U44M1P7 "

Hi NASAPaul
Please follow the below link : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

"Class not registered" Error when running Windows Explorer

Hi,
I've been having trouble running Windows Explorer + any related programs (Control Panel, Internet Explorer, etc.). Whenever I try to run such programs, a popup containing the following comes up:
C:\Users\<username>\AppData\Roaming\Microsoft\Windows\Start Menu
Class not registered
Any help? I've tried using a registry cleaner, and the command regsvr32 ExplorerFrame.dll didn't work. I don't recall installing anything, and everything else seems to be fine.
Thanks in advance.
EDIT: I've tried System Restore, didn't work.
Message Edited by NuclearTide on 01-20-2009 04:45 PM

Specs:
Lenovo 3000 N100
Windows Vista Home Premium
Genuine Intel (R) CPU T2080 @ 1.73 GHz (2 CPUs)
1014 MB RAM
DirectX 10
Intel(R) GMA 950

Getting Class not registered error when I run wmi queries

Getting Class not registered error when I run win32 wmi queries. Eg:

Specs:
Lenovo 3000 N100
Windows Vista Home Premium
Genuine Intel (R) CPU T2080 @ 1.73 GHz (2 CPUs)
1014 MB RAM
DirectX 10
Intel(R) GMA 950

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Error when run Depreciation Posting Run AFAB

Hi,
I found error when run Depreciation Posting Run for period 7 2007.
FYI. I had run Unplanned Depreciation (TCode: ABAA) with document date 31.10.2007 and posting date 31.10.2007, trans. type 640. After that, i want to run Depreciation Posting Run (TCode: AFAB) with fiscal year: 2008, posting period: 7, reason for posting run: repeat. Select on Test Run. Then i found error message as below.
Error Message:
Documents manually posted within dep.doc.number range
Message no. AA728
Diagnosis
In the number range interval for the document type for posting depreciation, a document has been posted which was not created within the framework of depreciation posting. The last document posted by depreciation posting was assigned the number .
Procedure
Contact your Systems Specialist. When changing the number range interval for the document type in depreciation posting, you have to specify a new interval in which no documents exist. Using organizational measures, you can guarantee that there are no documents apart from those created by depreciation posting in this number range.
Can any one help how to solve this issue?

Hi Paul,
Now I go to TCode: FBN1 - Accounting Document Number Ranges, then i want to change the range for year 2008.
No Year From No          To No           Current No          Ext
03 2001   0300000000   0399999999   -                          /
03 2002   0300000000   0399999999   -                          /
03 2003   0300000000   0399999999   -                          /
03 2004   0300000000   0399999999   -                          /
03 2005   0300000000   0399999999   -                          /
03 2006   0300000000   0399999999   -                          /
03 2007   0300000000   0399999999   -                          /
03 2008   0300000000   0399999999   -                          /
03 2009   0300000000   0399999999   -                          /
Referring back to Asset Accounting, the Reference Document: 19.
Do it mean that my FI doc. no is 0300000019 ? I bit confuse on this..
Can you guide me more details on it?
Thanks in advance.
Edited by: Nur Aman Abdul Manap on Apr 15, 2009 2:09 AM

E not assigned Error when running Data Manager

Similar Messages

Maybe you are looking for