Data Marts dont change source system id in QA

Hi friiends!
I have generated export datsource for characteritic in Dev.
When I transport this to QA, the datasource keep the Dev source system, this is wrong, In QA the datasource must be associated the QA source system.
How can I solve this?
Thank you in advance!!

Hello ,
Please check what you have collected in the Transport request. Select only Data source and transport without source system name.
Thanks.
Geeta

Similar Messages

Customized delta data source for deleting data record in the source system.

Hello Gurus,
there is a customized delta data source, how to implement delta function for deleting data record in the source system?
I mean if there is record deleted in the source sytem, how to notify SAP BW system for this deleting change by this customized delta
data source?
Many thanks.

Hi,
when ever record deleted we need to write the code to insert the record in Z table load this records into BW in a cube with similar structure.while loading into this cube multiply the Keyfigure by -1.
add this cube in the Multi Provider.The union of the records in the orginal cube and the cube having deleted records will result in zero vale and will not be displayed in report .
Regards,

Does not allow to change source system in Variant

Hi Gurus,
I am creating a variant for the program RSIMPCUST, but it does not allow me to change source system name. It is showing me gray color. Do you how to fix this issue ?.
Thanks
Liza

Hello Liza,
Did you try my solution?
[Re: Change source system name in variant in BWQ]
There are solutions to change variants properties, but that particular program has the logsys parameter not able to change, so you cannot change the value of that variant (only with debug).
It's best to go for that solution I already provided to you...
Diogo.

Change source system name in variant in BWQ

Hi Gurus,
I created a process chain for global seetings for unit of measurement and fiscal year variants and transported to BWQ.
In BWQ, I found the source system name in variant is showing ERD source system name, but I need to change it to ERQ source system name. Any advice how to change source system name in variant in BWQ I would appreciate it.
Thanks
Liza

Hello Again Liza...
I had the same problem but I didn't need to include in process chain...
So to execute periodically you can change it in debug mode, not the best solution...
But since you need to use it in a process chain, you should copy that program to one of yours Z.
Do this:
Go to transaction se38 and insert the program name "RSIMPCUST".
Click on the button of "Copy" (Ctrl+F5).
Change the source program name to ZRSIMPCUST (or whatever you want)
Click Enter
Click the button to mark everything (F8)
Click Enter
On the next window of the name of the include click enter (leave it blank)
Click on the button Change of your Source Code
In line number 54 you'll find this in Selection Screen part:
PARAMETERS: logsys TYPE rsa_logsys MODIF ID p01.
PARAMETERS: logsysnm LIKE tbdlst-stext MODIF ID p02.
Delete those two lines and insert this ones:
PARAMETERS: logsys TYPE rsa_logsys.
PARAMETERS: logsysnm LIKE tbdlst-stext.
Now click on Activate button (Ctrl+F3)
Now you have a new program just like the old one but you can change the source system to whatever you want!
Please assign points,
Diogo.

Collecting data from two R3 source systems

Dear All,
Scenario:
We are in the process of implementing SAP BI 7.0 in our organisation.
We have a single BI server (7.01) collecting data from two source
systems from two different divisions within the group.
The first system is of Company 1 where we have IS u2013 MILL (ECC 6.0).
BI has been implemented and running successfully in this unit. Now we
have started implementing BI in the second unit u2018Company 2u2019
where the industry specific solution IS u2013 AFS (ECC 6.0) is the source
system.
We are activating BI Standard Content for AFS. When we try to upload
master data, we face a problem.
The master data (0Division, 0Mat_Grp_3, etc.) is already loaded with
IS Mill data (data from the first source system). Now when the data is
loaded from IS AFS (second source system), wherever, the same key
exists in the info object, we notice that the existing data is
overwritten by the freshly loaded data, thus causing loss of existing
data.
A typical example is as follows:
BW Data u2013 Source system 1 u2013 (Before upload of data from source system
2):
0Division
99         EN          Stock Transfer Out
AFS Data (Source system 2) -
0Division
99         EN             STO
BW Data u2013 Source system 1 u2013 (After upload of data from source system 2):
After uploading the master data from AFS, the Values areu2026
0Division
99        EN            STO
The original data is lost.
Similar problem is noticed with other master data as well.
Please suggest the right methodology for upload of master data when
data to BW is sourced from two systems. How to retain the data in the
same Infoobject but at the same time maintain distinction between the
data from the two systems.
We donu2019t find any specific mention of such scenarios in the standard
documentation.
Will such a problem recur when we upload transactional data?
Regards,
Aslam Khan

Hi Aslam,
            Please use some compounding attribute for your master data object like Sourcesystem ID. While loading the master data from different source systems... you should have two different flows to fill the same master data object. In each flow you can specify the Source system ID as constant value ... eg SS1 (Source system 1) and SS2(Source system 2) in each of the data flows.   This should solve your issue without overwriting your master data
Thanks
Kishore

Change Source system Tech.Name

Production : PRE -
> PRB
PRE-Production : PPE -
> PRE
We make a copy of our production BI to Preproduction BI (PPB) we follow note # 886102. We want to connect this system to our pre production ERP (PPE).We already run BDLS change the logical system name we created new RFC created which is pointed to new R3 system .Problem is when we are going to run Tcode RSA1 in source system it shows old Tech name PRE600. We are unable to activate the source system.
We can create new source system (PPE),but All our BI objects mapped with old source System (PRE600). I am afraid to change thousands of BI objects ( change source system from PRE600 to PPE600).
Is there any work around we can change the Logical Source system Tech.Name? or some batch job which change the source system name for all BI objects.
Appreciate your earliest reply.
Nawab

Hi
Can you please check the Tcode BDLS
Check the document it will be helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Regards

Modeling the Data model when multiple source systems

Hi gurus,
i have a scenario where i am getting data from multiple source systems all R/3 but from different locatins.
my doubt is if i have to do reporting on the data available.
1. do i have to build seperate infocubes for each source systems or build seperate data designs for each source system .
2. How can i consolidate the different source sytems data into one and report sensibly as well as without loosing the source system identification.
thanks and regards
Neel

Hi all,
thanks for your focus, ya i am also thinking of have a flexible solution where in i can do it easily as well as we don't have much of complexcity, but wanted to try different options as well so that we can go for best one.
I thought of multiprovider at first when RafB suggested, and i agree with you as well Lilly, that data volume will be a problem, so keeping all this in view i want to build a solution where in it will be sensible as well as not confusing in reports ( i mean clear and readable reports)
[email protected]
please kindly forward any documents which might be helpful for me in this scenario
thanks and regards
neel
Message was edited by: Neel Kamal

Differentiating Master Data from two different source systems

Friends,
i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
Thanks in advance for all the help.
Mike

I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating this InfoObject. Please let me know if there is any way out of it.
Thanks
Mike

When we are able to see the data in Tcode RSA3(Source system)

Hi,
Please help me!
In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
Give the detail for all types of data source and for all types of loads.
eg: Std data source for deltaload, Generic data source for full load.....etc...
Regards,
Shiva.

Sure...
I am doing enhancement for datasource '2LIS_05_QVUDN'.
I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
So my question is, What is the root cause for this....?
When we are able to see the data in RSA3 in source system.?
please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

Master data load from 2 source system

Hi all,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding
attribute. Because all the objects which i want to use compunding attribute are reference
objects for lot of other info objects. So, i dont want to change the business content
objects structure. Please guide me
Thanks

Hi,
I cube there is nothing to do with compounding attribute, it will be handled in MD IO level. As your requirement to separate the transaction happen in different source system then make add another info object as Zsource and make it as nav. attribute then design your report based on nav. attribute.
Note that this separation is only possible in Material Related transaction not for others.
Thanks
BVR

Change Source System

Hi Gurus,
My BW Production is linked to ECC6 Production box.
I have copy my BW Production client to another box, (Sand box).
Now this Sand box is linked to ECC6 Production box because it is the copy of BW Produciton.
How can I change all my Source System so that this Sand box is pointed to my ECC6 Development box?
Please help.

YOu can do by this way.
Create one more RFC connection in SM59 and source system connection for ECC development box in your sand box.
there would be no problem if you have ECC production and ECC development both the source system connections in your BI.
If you dont need of ECC production source system connection. you can delete it.
But the data sources and everything you have to create for your new source system connection i suppose.
Hope this would help you.

Change source system in Infosource

Hi
I am working on BI7. I have one isse. For an infosource source system has been assigned to client 100. I would like to change it to 200. Pl let me know how to make this change.

Hi
I didn't get your question,how a infosource is assigned to source system,your data source will be assigned to source system and your infosource and data sourece will be assigned to each other..
delete the datasource from source system 100 and create a data source in 200 and assign it to your infosource(i am considering both 100 and 200 source systems are assigned linked to your BW system via RFC(SM59))..
Hope it helps
Thanks
Teja

Change Source System in Transfer Rules

Dear All,
I need to change the Source System assignment in Transfer Rule from System "A" to System "B", as the System "A" no longer exists.
I came across the T-Codes BDLS/BDLSS but aint sure if this can help me rectify the issue.
Request you to please provide some inputs.
Regards,
Nitin S.

Hi
if you change the source system you may face the problem.
first you can replicate the Dat sources on B, then you can map the info source with your respective data source.
else it will not allow you for thr mapping.
Regards,
chandra.

How to change source system in SAP BI

Hi,
In Sap BI we are having a source system ECC1CLIENT100, based on this we developed all the data modelling, now due to some reasons we made a copy of the souce system ECC1CLIENT100 to ECC2CLIENT100 and we removed ECC1CLIENT100 from SAP BI connections, Now what changes we have to do to connect the ECC2CLIENT100 to BI in the place of ECC1CLIENT100, please give me step to step what to do for sucessfull operations, Both the clients are having different IP, SYSTEM ID,
Thanks in advance,

Hi Bazi,
-->you need to maintain RFC to the new source system
-->delete old source system
-->create source system connection from RSA1
--> Run BDLS to point the data sources to new source system. This should be run on both BW and ECC.
You will need to run this BDLS several times
for more info check the below link
How to change the BI source system
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards
KP
Edited by: prashanthk on Aug 18, 2010 6:22 AM

Best Way to Change Source System Client

We initially had a ECC source client for BI as 35. But over time, we suffered with good test data because the ECC team use client 15 and not 35. We want to change BI 7 to use client 15. I have created a new source system in RSA1 for Client 15 but when I try to delete client 35 and /or change the source client on a datasource, all the data mappings are deleted!
I would really appreciate any advice or information on the best way to change the source R3 client for Bi without losing data mappings. Point awarded and much respect
Warm regards
Lee Lewis

Hi,
Yes. There is a way to change the source system without deleting the old system. Please use the T.code BDLS and for more information refer the below link
Re: Changing a Source System.
OSS note 886102 will also give more information about this.
Hope it helps.
Thanks.

Data Marts dont change source system id in QA

Similar Messages

Maybe you are looking for