Data modeler cannot connect to non-default sql server instance
I've just started using DM, it installed and loaded fine, I got the jdbc drivers v2.0 from MS so that I can reverse engineer a couple of SQL-Server 2005 DB's.
All worked just fine until I tried to connect to a machine with a named-sql-server instance.
Normal way of doing this for sql-server is to add instance name to end of hostname in the hostname field, like this: "server10\inst01"
but this gives me a cannot-connect-to-server10 error.
I copied database over to a different server that has just a default sql-server instance and it worked fine. (both sql-server2005 and 2000!)
I also tried the older 1.2 jdbc driver from MS against the sql-server 2005 named instance, no luck!
I tried putting the instance name in front of the port number, that didn't work either.
Am I just doing something wrong? or does DM need a special way of specifying the instance name on the sql-server host?
Hello,
you don't need instance name in order to connect. It's only host and port - probably named instance is not listening on default port. It'll be unfortunate if dynamic port assignment is used - but probably that won't be the case.
I hope someone can tell you the port number.
Philip
Similar Messages
-
Setup cannot connect to the specified SQL Server instance
On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
BenjilafouineDefinitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall. -
Cannot connect to the specified SQL Server instance
I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
I am getting the following error:
Setup cannot connect to the specified SQL Server instance.
Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
I have installed the
Microsoft® SQL Server® 2008 R2 Command Line Utilities
but have not set up any SQL Server instances.
how should i proceed?
Edit:
The followign fields are configured:
Server Name: The name of the machine i am using
Port: <empty>
Use the following credentials <NOT ticked>
Instance name <empty> (the drop down is empty)
New Database <Ticked> : VirtualManagerDBIs SQL server is properly installed on the system?
Are you able to connect with SQL server instance?
As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
http://technet.microsoft.com/en-us/library/gg610656.aspx
Hope it help!
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
Data modeling tool to design a dwh - SQL Server 2008 R2-2012
Hi,
I need to know if it exists a Microsoft tool to model the data structures of a data warehouse. I generally use the SQL Server diagrams but I'd like to know an enhanced tool. Visio?
ThanksHi,
You could download a 60 day free trial of Visio; -
http://office.microsoft.com/en-gb/visio/visio-professional-2013-free-trial-flowchart-software-FX103791368.aspx
Have a look at a related link; -
http://social.technet.microsoft.com/Forums/sqlserver/en-US/620009b1-9625-4e1f-8574-f4049718ffe2/shapestemplates-bi-for-visio
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/ -
Connecting to a specific SQL Server instance?
Hi all,
I create a new connection for SQL Server, specify the host and the port number that SQL Browser is listening on (my servers have dynamic ports, not static), and I can connect succesfully to the local SQL Server Instance on that machine, which is SQL Server 2000. However, I also have a SQL Server 2005 and 2008 running on that machine as well, and wish to connect to them.
The SQL Server tab doesn't ask for an instance name at all, so I don't know how to do that. I suppose I could make my ports static for each instance, but the point of using SQL Browser is that you don't need to do that. SQL Browser acts almost like a DNS server for any sql requests coming to that machine.
Is there any way to specify which instance name you want to connect to rather than a port #?Ok, that worked. Now for another question, why isn't the connection retreiving the database I selected in the SQL Server tab? It's only retrieving the master database if I connect as sa (master is the default database for SA). How do I set it up to use a different database, or do cross database queries? I suppose I could make a user for each database, but that doesn't fix the second issue.
I think I might just be stuck using two different tools for these two very different products. -
I just started learning ASP.NET through a book, and it asks to connect to "your" SQL server and explore a .mdf file. I've been trying to install SQL, but I only just now got a working installation, and even then it won't let me install the Management
Software. Whenever I try to connect, I get this error: http://puu.sh/7F2JY.png
This is exactly what I do to connect:
1) Open project
2) Navigate to the Server Explorer
3) Click on connect to database
4) In this menu, I can see me Machine name on the top part, which I think means that it's picking up my server runningh
5) On the bottom, it wants me to enter a database name. I think this may be my problem, as I have no idea what to do here.
Also, when I double click on the database file, I get this errpr (52): http://puu.sh/7F2Yw.png
I really don't know what to do here, so post any tips down belowHi,
Did you choose the correct Server name? It should be the machine name where you installed SQL Server on.
Is it empty when you open select or enter database name drop box in the Add connect dialog box in the Visual Studio 2013?
“Update: I re-installed, and then used both installers. Now I have the Server Management tools, but I still cannot connect.”
The screenshots indicates that the SQL Server is not accessible.
Do you mean that you are not able to connect SQL Server by using SQL Server Management Studio?
If so, make sure that SQL Server Services is started.
Please check out the following articles for details:
How to: Start an Instance of SQL Server (SQL Server Configuration Manager)
http://technet.microsoft.com/en-us/library/ms190699(v=sql.105).aspx
Connect to Any SQL Server Component from SQL Server Management Studio
http://technet.microsoft.com/en-us/library/ms173871.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adilHI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil -
Cannot not connect to SQL Server instance.
Hello,
I have SQL Server 2012 installed and when I run this command:
sc query mssql$MSSQLSERVER
I get this error:
[SC] EnumQueryServicesStatus:OpenService FAILED 1060:
The specified service does not exist as an installed service.
I run this command on the same server where SQL Server is installed. Databases are on the same server too. TCP/IP is enabled for the instance and port 1433 is open on the server's firewall. SQL Server Browser is running.
Many errors in the SQL Server error logs like:
SQLServer Error: 11001, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct.
SQLServer Error: 11001, TCP Provider: No such host is known. [SQLSTATE 08001]
Any ideas what could have gone wrong?
Thanks,
Paul
PaulHi Paul,
According to your description, you fail to connect to SQL Server 2012 instance. According to the SQL Server error log, based on my research, your issue could be due to that
the client cannot resolve the name of the SQL Server instance.
Are the errors from the SQL Server error log solved? If the errors are not solved, please follow the steps below to troubleshoot the issue.
1. Make sure you are able to ping the physical server where SQL Server is installed from the client machine. If not, you can try to connect to the SQL Server using an IP Address (for default instance) or IP Address\Instance Name
for a named instance.
2. Make sure you are using the correct instance name. When you connect to a default instance, machine name is the best representative for the instance name and when you connect to a named instance such as sqlexpress, you should
specify machinename\instancename according to
Niting123’s post. And you could verify if you use the right instance name in SQL Server configuration manager according to
Niting123’s post.
3. Check that SQL Server is in the network. You can use the SQLCMD -L command to retrieve the list of SQL Server installed in the network. Note that this will only return SQL Servers if the SQL Server Browser service is running.
4. Make sure that you enable Named Pipes besides TCP/IP protocol.
5. Check to see if remote connections is enabled. Right click on the server name in SSMS and select Properties. Go to the Connections tab and make sure Allow remote connection to this server is checked.
6. Locally connect to SQL Server and check the error log for the port entry.
7. To connect to SQL Server instance using TCP/IP from another computer, on the SQL Server computer, you must configure the firewall to allow connections to the TCP port used by the Database Engine. If you are connecting to a named
instance or a port other than TCP port 1433, you must also open the UDP port 1434 for the SQL Server Browser service according to pasquale’s post.
For step by step instruction on opening a port in the Windows firewall, see
How to: Configure a Windows Firewall for Database Engine Access
For more information about the process, please refer to the article:
http://www.mssqltips.com/sqlservertip/2340/resolving-could-not-open-a-connection-to-sql-server-errors/
In addition, you mention that there are many other errors, so please provide the SQL Server error log for analysis.
Regards,
Michelle Li -
Data service cannot connect to mover
Hello,
I have an installation of OSB that worked ok until last week.
From last week, the following message started appear, and I need your help to understand if this is a physical error or it is a OSB problem:
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Below a full example (it is a piece of osb job log):
2011/03/31.10:32:59 ______________________________________________________________________
2011/03/31.10:32:59
2011/03/31.10:32:59 Transcript for job oracle/3732.1 running on srvcmdstbyb
2011/03/31.10:32:59
Volume label:
Volume UUID: 869b6426-3de2-102e-969c-00137252621c
Volume ID: OSB-CATALOG-MF-009352
Volume sequence: 1
Volume set owner: root
Volume set created: Thu Mar 31 10:33:18 2011
Volume set closes: Thu Apr 07 10:33:18 2011 (no writes after this time)
Volume set expires: Thu Apr 21 10:33:18 2011
Media family: OSB-CATALOG-MF
Original UUID: 869b6426-3de2-102e-969c-00137252621c
Archive label:
File number: 1
File section: 1
Owner: root
Client host: srvcmd
Backup level: 0
S/w compression: no
Archive created: Thu Mar 31 10:33:18 2011
Backup piece name: arch_HCB1_3799_1_30_03_2011_747153724
Backup db name: hcb1
Backup db id: 660880637
Backup copy number: not applicable
Backup content: archivelog
Error: data service cannot connect to mover - error connecting to another NDMP server (NDMP client)
Backup statistics:
status 21
devices VS80
devices 1
volumes OSB-CATALOG-MF-009352
voltags (null)
file 1
host srvcmd
encryption off
start_time Thu Mar 31 2011 at 10:33:18 (1301578398)
end_time Thu Mar 31 2011 at 10:33:29 (1301578409)
backup_time Thu Mar 31 2011 at 10:33:18 (1301578398)
dev_kbytes 6
dev_iosecs 11
dev_iorate 605.1 B/S
wrt_iosecs 4
wrt_iorate 1.7 KB/S
physical_blks_written 0
write_errors 0
physical_blks_read 0
read_errors 0
error_rate 0%
2011/03/31.10:33:30 ______________________________________________________________________
Thank you in advance.
Best regards.
Ricardo Brambila.Can you include an "obtool lsh -l" please? You may also want to check that you can do an "obtool pingh" to the client and media servers that are being used. Maybe a service isn't accessible.
Please confirm you are using OSB 10.3.0.3.0 from "obtar -V"
You should also not really be writing your RMAN jobs to the OSB Catalog Media Family. You should instead use its own or the RMAN-DEFAULT one.
Thanks
Rich -
I need to connect to 2 different SQL server without creating linked server for generating report. Is it possible in SSRS 2008 report service?
Yes possible
You would just required created two data sources which points to both your SQL Servers. And inside report you can create datasets based on each of these data sources to retrieve and display the data from them. In cases where you would require merging the
data from both the systems you can use functions like Lookup, LookupSet etc. Reports created in SSRS can be rendered in a variety of formats like Excel, PDF, CSV etc
see
http://www.allaboutmssql.com/2013/08/ssrs-example-for-lookup-lookupset-and.html
http://www.sqlcircuit.com/2012/03/ssrs-2008-r2-lookup-how-to-use-multiple.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O. I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name: Application
Source: MSDPM
Date: 6/13/2011 1:09:12 AM
Event ID: 4223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSDPM" />
<EventID Qualifiers="0">4223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
<EventRecordID>68785</EventRecordID>
<Channel>Application</Channel>
<Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
<Security />
</System>
<EventData>
<Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
<Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress. -
Trouble connecting to the Microsoft SQL Server 2005 using JDBC Connection
Hi,
I am unable to connect to the Microsoft SQL Server 2005 using JDBC Connection. Kindly tell me steps to connect to the SQL Server using JDBC. The error message that I am getting while creating a data source is :
java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/JDBCConnector_KedDS.xml". [id = StartupError]
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 13169050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "KedDS".
at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1843)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseInstantiationException: Cannot create instance ManagedConnectionFactoryImpl.
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:78)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1779)
... 42 more
Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Found in negative cache
------------------------- Loader Info -------------------------
ClassLoader name: [library:KedDriver]
Parent loader name: [Frame ClassLoader]
No references !
Resources:
E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\ext\KedDriver\sqljdbc.jar
E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\core_lib\opensqlport.jar
Loading model: {parent,local,references}
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:74)
... 43 more
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:663)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
... 31 more
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 13169050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "KedDS".
at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1843)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseInstantiationException: Cannot create instance ManagedConnectionFactoryImpl.
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:78)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1779)
... 42 more
Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Found in negative cache
------------------------- Loader Info -------------------------
ClassLoader name: [library:KedDriver]
Parent loader name: [Frame ClassLoader]
No references !
Resources:
E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\ext\KedDriver\sqljdbc.jar
E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\core_lib\opensqlport.jar
Loading model: {parent,local,references}
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:74)
... 43 more
at com.sap.engine.services.deploy.server.application.ParallelAdapter.sleepClientThread(ParallelAdapter.java:270)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:127)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
... 33 more
at com.sap.engine.services.dbpool.exceptions.BaseRemoteException.writeReplace(BaseRemoteException.java:178)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:367)
at javax.management.MBeanException.writeObject(MBeanException.java:126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:367)
at com.sap.exception.BaseExceptionInfo.writeObject(BaseExceptionInfo.java:964)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.sap.engine.services.jmx.ResponseMessage.writeBody(ResponseMessage.java:177)
at com.sap.engine.services.jmx.Message.writeMsg(Message.java:257)
at com.sap.engine.services.jmx.Message.getMsg(Message.java:453)
at com.sap.engine.services.jmx.Message.writeExternal(Message.java:505)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1267)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:66)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)i'm using jcreator pro
jdk i.6
mssql server 2005
and downloaded the jdbc driver( i noticed that the msutil.jar and msbase.jar are not in the folder avalable on microsoft site Microsoft SQL Server 2005 JDBC Driver so i installed
Microsoft SQL Server 2000 Driver for JDBC 1st and just changed the jqljdb.jar file with the one available in Microsoft SQL Server 2005 JDBC Driver )
and set the path of the CLASSPATH to a folder which name has no spaces
and tried Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
and Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
and tried compiling and running with command prompt
and still have the same exception which occurs at runtime
"An exception has occured: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver"
i really need help -
Error while trying to connect to a remote SQL Server DB using multiconnect
As part of our business process, we need to connect to a SQL Server DB external to SAP.
We have done the following:
1. We set up an ODBC connection on our SAP sandbox server to the external SQL server DB.
Name: sdsdev
Connection string: sdsdev\sqlexpress2008
2. We tested the ODBC connection from within ODBC and it works perfectly
3. Using transaction: DBCO we have set up a DB connection known to SAP that we can use in ABAP to retrieve the data.
It was set up with exactly the same parameters as with the ODBC.
We used the following connection string so it would know to use the ODBC DBSL profile parameters, with the DSN name
being the same as defined in the ODBC: See below ...
DB connection: AR_INTERFACE
DBMS: MSS
User Name: ARTransfer
Password: ******
Conn info: MSSQL_DSN=sdsdev
4. We also made sure we installed the DBSL dynamic library (DLL) on the R/3 system server.
5. We ran a small test program to test connectivity ... as below ...
exec sql .
connect to 'AR_INTERFACE'
end exec.
right after the above command we check the system log for status. It failed with the following message:
B Wed Feb 09 14:40:40 2011
B Connect to AR_INTERFACE as ARTransfer with MSSQL_DSN=sdsdev
MSSQL_DBNAME=ARTransfer
C Thread ID:3900
C dbmssslib.dll patch info
C patchlevel 0
C patchno 118
C patchcomment Problems with the use of literals in non-unicode
systems (1524929)
C np:(local) connection used on SAPS101B
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbds#2 @
1056] [dbds 1056 ]
B ***LOG BY0=> <message text not available> [dbds#2 @ 1056] [dbds
1056 ]
The connection failed !
We used all of the information found in OSS Notes we could find.
Has anyone had this problem before ? Is there something obvious we are missing in all this ?
Thank you for your assistance.Is this Excel or Access? If Excel, try this.
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Please Help!!! 'iTunes cannot connect to iphone update software server'
I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
Not sure what to try next, have tried setting up new user to no avail.
I have followed the support guidance and I am not connected through proxy.
Diagnostics reported as follows:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Inc. Dell DV051
iTunes 9.2.1.5
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number 098625257EFAC14A
Current user is an administrator.
The current local date and time is 2010-07-25 12:16:28.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.77
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: No
DHCP Server: 255.255.255.255
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-07-25 10:25:45.
** Device Connectivity Tests **
iPodService 9.2.1.5 is currently running.Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
1: Make sure your whole iTunes database is backed up.
2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
3: Re-install the correct version of iTunes fresh and try again. -
Connecting from Oracle to SQL Server
Hi
I am now tring to connect from oracle to sql server using database link.
Created database link
but when connecting to remote db getting the floowing error
select * from region@mysqlserverdsn
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from MYSQLSERVERDSN
Can anyone help
My Listener File
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc1)
(SID_DESC =
(GLOBAL_DBNAME = ORCL.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NORTHWIND.DOMAIN.COM)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = MYSQLSERVERDSN)
(PROGRAM=hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = SALIHKM.DOMAIN.COM)(PORT = 1522))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
My Tnsnames Entry
MYSQLSERVERDSN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(PORT=1522))
(CONNECT_DATA=(SID=MYSQLSERVERDSN))
(HS=OK)
Lsnrctl is working fine.
c:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 18:53
:13
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 18-MAY-2006 18:53:16
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But Tnsping show no listener
C:\>tnsping MYSQLSERVERDSN
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2
006 18:56:27
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.xxx)(P
ORT=1522)) (CONNECT_DATA=(SID=MYSQLSERVERDSN)) (HS=OK))
TNS-12541: TNS:no listener
Services
C:\>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-MAY-2006 19:00
:04
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SALIHKM.DOMAIN.COM)(POR
T=1522)))
Services Summary...
Service "NORTHWIND.DOMAIN.COM" has 1 instance(s).
Instance "MYSQLSERVERDSN", status UNKNOWN, has 1 handler(s) for this service..
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ORCL.DOMAIN.COM" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: SALIHKM, pid: 2080>
(ADDRESS=(PROTOCOL=tcp)(HOST=SALIHKM.DOMAIN.COM)(PORT=1070))
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I am very much confused with this situation.
Thanks & Regards
Salih KmHi ,
Thanks for your reply.
Contents of my initMYSQLSERVERDSN.ora file is
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQLSERVERDSN
HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_FILE_NAME = hsmsql.trc
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
set ODBCINI=c:\WINDOWS\ODBC.INI
SALIHKM.DOMAIN.COM is my system in which Oracle Test DB is Installed.
SQL Server is in another location.
In Tnsnames i specified ip address.
One more doubt.
I am using 10g Release 2 demo version.
whether it will support Hetrogeneous Services?
How to know whether a database supports HS or not?
Thanks & Regards
Salih Km
Maybe you are looking for
-
I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue. I stopped in to see one o
-
I want to make a tint (screen) of a swatch and have the tint appear in the swatches panel. How? Thanks
-
Photoshop crashes when undo changing shape color
I found 100% reproducing Photoshop crash. Steps to reproduce: 1. Create new document. 2. Create Shape Layer (Circle for example) 3. Create new layer. 4. Select Shape Layer. 5. Change Shape color. 6. Undo or Ctrl + Z
-
Getting Error 9812 when trying to buy music from ITunes store
I want to buy one song from the ITunes Store. I am able to access the song, but when I push the "Buy Song' button, it says "Unable to access Itunes store - an unknown error occurred - 9812". I have tried to fix ITunes through the Control Panel - this
-
I've been working with final cut for some time but I can't figure this one out since it's the first time I've imported an Avid Codec file. I have the Avid Codec for Quicktime so what's working fine. But the only thing is when I put my video on the ti