Setup cannot connect to the specified SQL Server instance

On a clean install domain member (Windows 2012), I am trying to setup System center 2012 VMM:
1. I installed the prerequisites as instructed during the pre-setup phase of the installation then rebooted the server (SQL Server 2012 was installed and services seem to be all started properly and SQL Configuration Manager starts as well).
2. After reboot, logged again with domain admin account and Windows update installed right away SP1 for SQL server 2012. Then I rebooted again.
3. Restarted the installation process and left default values. At the "Database configuration" step, I am leaving everything by default as well and I am getting error: "Setup cannot connect to the specified SQL Server instance. Ensure that
the server name..."
4. Tried different credentials, tried using port 1433 with no effect.
Am I missing something????
Thanks.
Benjilafouine

Definitely be sure to connect with the "ServerName\InstanceName,PortNumber". If you don't reference a port number it will try 1433 and then will connect via a dynamic port number. It is best in my opinion to always specify a specific port for each instance
to listen on in the SQL Server Configuration Manager so that you can open the fewest number of ports in the Windows firewall.

Similar Messages

  • Cannot connect to the specified SQL Server instance

    I am trying to install Microsoft System Center 2012 R2 Virtual Machine Management.
    I am getting the following error:
    Setup cannot connect to the specified SQL Server instance.
    Ensure that the server name, isntance name, and, if speceified, port number are correct. If you are installing VMM remotely, ensure that remote connections are set up correctly, and then try Setup again.
    I have installed the 
    Microsoft® SQL Server® 2008 R2 Command Line Utilities
    but have not set up any SQL Server instances. 
    how should i proceed?
    Edit:
    The followign fields are configured:
    Server Name: The name of the machine i am using
    Port: <empty>
    Use the following credentials <NOT ticked>
    Instance name <empty> (the drop down is empty)
    New Database <Ticked> :  VirtualManagerDB

    Is SQL server is properly installed on the system?
    Are you able to connect with SQL server instance?
    As per the given details looks, only client utilities installed and trying to create the database which needs SQL server.
    Make sure you are able to connect with the "ServerName\InstanceName,PortNumber" and hope installing the system as per below article:
    http://technet.microsoft.com/en-us/library/gg610656.aspx
    Hope it help!
    Please click the Mark as answer button and vote as helpful if this reply solves your problem

  • [Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

    Symptom
    If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
    “The specified SQL server instance is not valid”.
    (Figure 1)
    Figure 1.
    Reason
    This issue may be caused by multiple reasons, for example the reasons in Figure 1.
    However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
    to find the root reason:
    C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
    Later, you will find the error as below:
    ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
    The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
    (0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
    at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
    at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
    --- End of inner exception stack trace ---;
    Solution
    According to the error message, you can delete encrypted content by following the steps below:
    Open SQL Reporting Services Configuration Manager.
    Select “Encryption Keys”.
    Click “Delete” to delete all encrypted content. (Figure 2)
    Figure 2.
    After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
    Figure 3.
    In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
    service logs to find the root reason.
    Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
    How to Install the Operations Manager Reporting Server
    http://technet.microsoft.com/en-us/library/hh298611.aspx
    Unable to install SCOM 2012 Reporting Services
    http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hello,
    I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
    SCCM and SCOM - SQL Server 
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
    SCOM, SCCM, SQL on same server?
    http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
    Thanks,
    Yog Li
    TechNet Community Support

  • Data modeler cannot connect to non-default sql server instance

    I've just started using DM, it installed and loaded fine, I got the jdbc drivers v2.0 from MS so that I can reverse engineer a couple of SQL-Server 2005 DB's.
    All worked just fine until I tried to connect to a machine with a named-sql-server instance.
    Normal way of doing this for sql-server is to add instance name to end of hostname in the hostname field, like this: "server10\inst01"
    but this gives me a cannot-connect-to-server10 error.
    I copied database over to a different server that has just a default sql-server instance and it worked fine. (both sql-server2005 and 2000!)
    I also tried the older 1.2 jdbc driver from MS against the sql-server 2005 named instance, no luck!
    I tried putting the instance name in front of the port number, that didn't work either.
    Am I just doing something wrong? or does DM need a special way of specifying the instance name on the sql-server host?

    Hello,
    you don't need instance name in order to connect. It's only host and port - probably named instance is not listening on default port. It'll be unfortunate if dynamic port assignment is used - but probably that won't be the case.
    I hope someone can tell you the port number.
    Philip

  • SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

    Hi All,
    I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
    For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
    Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM. 
    On OpsMgrSetupWizard.log give error
    [12:24:53]: Error:
    :CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
    [12:24:53]: Error:
    :StackTrace:   at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
    I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
    on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
    Many thanks for your help.

    Hello,
    I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
    SCCM and SCOM - SQL Server 
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
    SCOM, SCCM, SQL on same server?
    http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
    Thanks,
    Yog Li
    TechNet Community Support

  • Error: Cannot connect to the specified repository

    Hi,
    The instance of my development database was moved from one server to another server… and installed successfully…
    The repository owner and repository user are available in the repository in the new server…I can login through sqlplus.
    But when I try to connect to the repository from the design center I am getting the following error message box.
    <
    Database Connection Error!
    API5022 : Cannot connect to the specified repository. Verify the connection information
    >
    Please assist me.
    Thanks,
    Rejitha

    try this:
    Query to verify current configuration:
    SELECT * FROM WB_RT_SERVICE_NODES;
    Query to update Port and Service Name (supply the necessary details):
    UPDATE WB_RT_SERVICE_NODES
    SET PORT = <PORT>, SERVICE_NAME = <Service_Name>;
    Commit;
    Stop/start your OWB service using
    <OWB_HOME>\owb\rtp\sql\stop_service.sql
    <OWB_HOME>\owb\rtp\sql\start_service.sql
    Unregister your location and register again with the correct credentials.
    Hope this helps.
    -Richard

  • DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

    [oracle@ora11g1 ~]$ export ORACLE_SID=sales
    [oracle@ora11g1 ~]$ rman target sys/sales@sales
    Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SALES (DBID=690066655)
    RMAN> connect auxiliary sys/salestby2@salestby2
    connected to auxiliary database: SALES (not mounted)
    RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
    2> SET DB_NAME= 'sales'
    3> SET DB_UNIQUE_NAME= 'salestby2'
    4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
    5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
    6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
    Starting Duplicate Db at 05-JUN-13
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=20 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
    '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
    '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
    '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
    sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
    executing Memory Script
    Starting backup at 05-JUN-13
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=58 device type=DISK
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
    ORA-17629: Cannot connect to the remote database server
    ORA-17627: ORA-01017: invalid username/password; logon denied
    ORA-17629: Cannot connect to the remote database server
    continuing other job steps, job failed will not be re-run
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
    ORA-17629: Cannot connect to the remote database server
    ORA-17627: ORA-01017: invalid username/password; logon denied
    ORA-17629: Cannot connect to the remote database server

    Welcome to the oracle forums!
    Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
    Always post 4 digit oracle version and OS details.
    Post any query out put between \  \ tags
    Mark your questions as answered if you get the answer
    Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
    scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

  • API5022: Cannot connect to the specified repository. Verify connection info

    Hi,
    While logging into OWB client, we are getting the following error and not able to connect to OWB repository:
    API5022: Cannot connect to the specified repository. Verify connection information. Cache Loading Error: SQL Exception
    Just one week back, this was running fine, and we were able to login to this OWB rep and do normal operation, and suddenly from today, the above error is coming during owb client log-on.
    I have checked service_doctor.sql, and it gives everything is OK.
    Also, ran the stop_service and start_service, and those are running fine.
    And also restarting the database also did not fix the problem.
    And also, this problem is coming from all the machines, so may not be local machine specific.
    OWB version is 10g Release (10.1).
    Can you please let me know how to fix the above problem.
    Thanks & Regards,
    lenin

    When you log onto OWB you also need to give the database connection details.
    These can be seen when you click on the Show Detail >> button on tjhe loin screen.
    Did you enter these details?
    neil

  • Trouble connecting to the Microsoft SQL Server 2005 using JDBC Connection

    Hi,
    I am unable to connect to the Microsoft SQL Server 2005 using JDBC Connection. Kindly tell me steps to connect to the SQL Server using JDBC. The error message that I am getting while creating a data source is :
    java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/JDBCConnector_KedDS.xml". [id = StartupError]
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
    at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
    at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
    at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
    at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
    at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
    at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
    at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
    at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
    at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
    at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
    at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
    at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
    at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
    com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 13169050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "KedDS".
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1843)
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
    at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
    at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
    at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
    at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
    at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
    at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
    at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
    at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
    at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
    at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
    at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
    at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
    at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseInstantiationException: Cannot create instance ManagedConnectionFactoryImpl.
    at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:78)
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1779)
    ... 42 more
    Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Found in negative cache
    ------------------------- Loader Info -------------------------
    ClassLoader name: [library:KedDriver]
    Parent loader name: [Frame ClassLoader]
    No references !
    Resources:
    E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\ext\KedDriver\sqljdbc.jar
    E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\core_lib\opensqlport.jar
    Loading model: {parent,local,references}
    at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
    at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:74)
    ... 43 more
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:663)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
    ... 31 more
    Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 13169050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "KedDS".
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1843)
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:489)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
    at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:171)
    at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:645)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:606)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:285)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.createDataSource(DataSourceManagerImpl.java:342)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
    at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
    at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
    at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
    at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
    at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
    at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
    at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
    at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
    at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
    at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
    at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
    at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
    at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.dbpool.exceptions.BaseInstantiationException: Cannot create instance ManagedConnectionFactoryImpl.
    at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:78)
    at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1779)
    ... 42 more
    Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
    Found in negative cache
    ------------------------- Loader Info -------------------------
    ClassLoader name: [library:KedDriver]
    Parent loader name: [Frame ClassLoader]
    No references !
    Resources:
    E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\ext\KedDriver\sqljdbc.jar
    E:\usr\sap\J2E\JC01\j2ee\cluster\server0\bin\core_lib\opensqlport.jar
    Loading model: {parent,local,references}
    at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
    at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.<init>(ManagedConnectionFactoryImpl.java:74)
    ... 43 more
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.sleepClientThread(ParallelAdapter.java:270)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:127)
    at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245)
    at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4761)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:661)
    ... 33 more
    at com.sap.engine.services.dbpool.exceptions.BaseRemoteException.writeReplace(BaseRemoteException.java:178)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
    at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:367)
    at javax.management.MBeanException.writeObject(MBeanException.java:126)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
    at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
    at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    at java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:367)
    at com.sap.exception.BaseExceptionInfo.writeObject(BaseExceptionInfo.java:964)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:809)
    at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1296)
    at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1332)
    at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1304)
    at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1247)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
    at com.sap.engine.services.jmx.ResponseMessage.writeBody(ResponseMessage.java:177)
    at com.sap.engine.services.jmx.Message.writeMsg(Message.java:257)
    at com.sap.engine.services.jmx.Message.getMsg(Message.java:453)
    at com.sap.engine.services.jmx.Message.writeExternal(Message.java:505)
    at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1267)
    at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1245)
    at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1052)
    at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:66)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    i'm using jcreator pro
    jdk i.6
    mssql server 2005
    and downloaded the jdbc driver( i noticed that the msutil.jar and msbase.jar are not in the folder avalable on microsoft site Microsoft SQL Server 2005 JDBC Driver so i installed
    Microsoft SQL Server 2000 Driver for JDBC 1st and just changed the jqljdb.jar file with the one available in Microsoft SQL Server 2005 JDBC Driver )
    and set the path of the CLASSPATH to a folder which name has no spaces
    and tried Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
    and Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
    and tried compiling and running with command prompt
    and still have the same exception which occurs at runtime
    "An exception has occured: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver"
    i really need help

  • My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

    have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
    any help will be great thank you

    All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
    I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

  • Connecting to a specific SQL Server instance?

    Hi all,
    I create a new connection for SQL Server, specify the host and the port number that SQL Browser is listening on (my servers have dynamic ports, not static), and I can connect succesfully to the local SQL Server Instance on that machine, which is SQL Server 2000. However, I also have a SQL Server 2005 and 2008 running on that machine as well, and wish to connect to them.
    The SQL Server tab doesn't ask for an instance name at all, so I don't know how to do that. I suppose I could make my ports static for each instance, but the point of using SQL Browser is that you don't need to do that. SQL Browser acts almost like a DNS server for any sql requests coming to that machine.
    Is there any way to specify which instance name you want to connect to rather than a port #?

    Ok, that worked. Now for another question, why isn't the connection retreiving the database I selected in the SQL Server tab? It's only retrieving the master database if I connect as sa (master is the default database for SA). How do I set it up to use a different database, or do cross database queries? I suppose I could make a user for each database, but that doesn't fix the second issue.
    I think I might just be stuck using two different tools for these two very different products.

  • I cannot connect to my basic SQL server from Visual Studio Ultimate 2013? Error 40 - Cannot establish connection

    I just started learning ASP.NET through a book, and it asks to connect to "your" SQL server and explore a .mdf file. I've been trying to install SQL, but I only just now got a working installation, and even then it won't let me install the Management
    Software. Whenever I try to connect, I get this error: http://puu.sh/7F2JY.png
    This is exactly what I do to connect:
    1) Open project
    2) Navigate to the Server Explorer
    3) Click on connect to database
    4) In this menu, I can see me Machine name on the top part, which I think means that it's picking up my server runningh
    5) On the bottom, it wants me to enter a database name. I think this may be my problem, as I have no idea what to do here.
    Also, when I double click on the database file, I get this errpr (52): http://puu.sh/7F2Yw.png
    I really don't know what to do here, so post any tips down below

    Hi,
    Did you choose the correct Server name? It should be the machine name where you installed SQL Server on.
    Is it empty when you open select or enter database name drop box in the Add connect dialog box in the Visual Studio 2013?
    “Update: I re-installed, and then used both installers. Now I have the Server Management tools, but I still cannot connect.”
    The screenshots indicates that the SQL Server is not accessible.
    Do you mean that you are not able to connect SQL Server by using SQL Server Management Studio?
    If so, make sure that SQL Server Services is started.
    Please check out the following articles for details:
    How to: Start an Instance of SQL Server (SQL Server Configuration Manager)
    http://technet.microsoft.com/en-us/library/ms190699(v=sql.105).aspx
    Connect to Any SQL Server Component from SQL Server Management Studio
    http://technet.microsoft.com/en-us/library/ms173871.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Itunes on windows 7 cannot connect to the iPad update server

    I have downloaded my windows updates, installed the newest version of iTunes, my internet is fully opel; however, I am unable to connect to the iPad update server so that I can restore my iPad 1 that is giving me trouble. *Sighs* Please help :/

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • Can two Instances of Planning share the same SQl Server Instance?

    Hi
    Can anyone clarify me on the below
    Is it possible to have our DEV and TEST instances of planning (on different host servers) point to different tables in the same instance of SQL Server 2005. I know that the apllication databases can be directed to different table names but what about the core tables:
    FSDHAADMS
    FSDHBIP
    FSDHSS
    FSDHPLANAPP
    FSDHPLANSYS
    Thanks in advance.

    I think it will work. As long as you create separate SQL databases for the planning system files for dev and prod on the sql server. If your planning web for dev is deployed on server x, and planning web for prod is on server y, when you run config utility on server x you would point to the SQL database u created for dev. Repeat on prod when u run the config utility just point to the planning system database you created for prod.
    haven't done this myself but sounds possible.

  • 2008 R2 Express Web Upgrade Failed: The selected SQL Server instance does not meet upgrade matrix requirements.

    HI
    I want to upgrade a SQL 2008 R2 Express install to 2008 R2 Web Edition.
    when I click view detailed report I get the below.
    How do I fix this?

    Hello,
    As per below link upgrade of SQL Server 2008 express to SQL server 2008 r2 web is not supported.So i guess this message.I have never tried upgrading unsupported edition so not too much sure about error message.But i am sure not meets requirement is because
    of unsupported upgrade you are doing
    http://technet.microsoft.com/en-us/library/ms143393(v=sql.105).aspx
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Maybe you are looking for