DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name:      Application
Source:        MSDPM
Date:          6/13/2011 1:09:12 AM
Event ID:      4223
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">4223</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
    <EventRecordID>68785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
    <Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!

Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress.

Similar Messages

The report server cannot open a connection to the report server database

I have SQL server installed to I can connect to RS using my domain/user account. However, when I try to go to http://<machine_name>/Reports/Pages/ReportViewer.aspx, I get error as
    * The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) Get Online Help
          o Login failed for user '<machine name>\ASPNET'
    * I also noticed that after I installed RS,I do not see reports folder under C:\Inetpub. This folder does not exist, I manually created reports virtual folder in IIS and liked it to C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer
    * Thsi is obviously permissions issue and I missing something so your help will be really appreciated.
During installation, I always specified user as domain\user.
Thanks

Hi NewToReporting,
From you descriptions, I know you have tow questions: 1.Why the SQL Server Reporting Services does not create virtual directories in the wwwroot? 2. Why the error "A connection to the database is required for all requests and processing" happen? If I have misunderstood, please do not hesitate to let me know.
One of the changes in SQL Server Reporting Services 2008 is the removal of the Internet Information Services (IIS) dependency. So, we won't see report server virtual directories in the wwwroot folder.
The second problem is caused by the user '<machine name>\ASPNET' does not have permission to login the SQL Server database "Reports".
To solve the issue, please follow these steps:
1.Open SQL Server Reporting Services Configuration Manager(Start - All Programs - Microsoft SQL Server 2008 - Configuration Tools)
2.Go to "Database" tab.
3.Click "Change Credential"
4.In the coming dialog, fill the textboxes with this information(some textboxes are not modifiable )
Server: <the server name of the report server catalog database>
Authentication Type: Current User - Integrated Security (This will use the user we are login to connect to the database server.)
UserName:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
Password:(If selecting "Current User - Integrated Security", this textbox is not modifiable. )
5. Click Next
6.In the coming dialog, configure the following information:
Authentication Type: Service Credential(This will use the user the reporting services running under to connect to the report server catalog database. The user is the one we configured in "Service Account" tab)
UserName:(If selecting "Service Credential", this textbox is not modifiable. )
Password:(If selecting "Service Credential", this textbox is not modifiable. )
7.Click Next to confirm the information.
8.Click Next to apply.
This will auto add the user '<machine name>\ASPNET' to login group, set this user to be the owner of report server catalog database, and also give this user "RSExce" role.
Now, we are able to connect to the report server.
For more information, please see:
Why Leave IIS: http://blogs.msdn.com/bwelcker/archive/2007/12/04/everybody-why-leave-iis.aspx
Configuring a Report Server Database Connection: http://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

The SMTP server requires a secure connection or the client was not authenticated. -.

Hello
I wrote this code. I searched but could not find a solution for my problem.
private void button_sendemail_Click(object sender, EventArgs e)
string temp = "mygmailpassword";
System.Security.SecureString password = new System.Security.SecureString();
temp.ToCharArray().ToList().ForEach(p => password.AppendChar(p));
string mailfrom = "…@gmail.com";
string mailto = "…@yahoo.com";
string subject = "Hello";
string body = "Hello, I'm just writing this to say Hi!";
using (MailMessage mail = new MailMessage())
mail.From = new MailAddress(mailfrom);
mail.To.Add(mailto);
mail.Subject = subject;
mail.Body = body;
mail.IsBodyHtml = true;
// Can set to false, if you are sending pure text.
using (SmtpClient smtp = new SmtpClient("smtp.gmail.com", 587))
smtp.UseDefaultCredentials = false;
smtp.DeliveryMethod = SmtpDeliveryMethod.Network;
smtp.Credentials = new NetworkCredential(mailfrom, password);
smtp.EnableSsl = true;
smtp.Send(mail);

Hi ARZARE,
After some research and i have tested your code, it works fine on my side. But i used Hotmail
using (SmtpClient smtp = new SmtpClient("smtp.live.com", 587))
Per my understanding, you're trying to send from an @gmail.com address and they will require authentication, but you don't have credentials specified. Try sending from @hotmail.com or change smtp.EnableSsl
= false to see what happens.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Message "the proxy server is refusing connection" pops up when connecting to wi-fi

When I go to connect my other dell laptop to the wireless internet, the message (The proxy server is refusing to connect" comes up. it says further, "Firefox is configured to use a proxy server that is refusing connections." Cannot figure out how to (re-configure?) firefox so that I can log onto wi-fi...

If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

DPM failed to communicate with the protection agent on DPM 2010 SERVER because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)

Hi everyone,
Backup jobs for protected members are intermittently failing with the following error on the DPM server:
DPM failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
Why does the DPM server failing to see it's own DPM agent cause the backup job for another server to fail? One day a backup will work fine, the next it may fail; and the next back to normal again...
The following error is recorded in the Service Control Manager event log on the DPM server just prior to the above error:
A timeout was reached (30000 milliseconds) while waiting for the DPMRA service to connect.
Thank you.
With regards,
Rob

Hello,
I have read these entire postings and see that my problems match most of the above problems.
I believe we have tried all of the ideas in this blog and lots of other ideas from other forums and internet searches.
We have about 80 small databases protected and set at 15 minute incremental and most will work but some fail. When they fail the most common, but not only error, is something like "DPM
failed to communicate with the protection agent on <DPM 2010 SERVER> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)". The alert is inactivated in the DPM Console, and the backups resume as normal."
Since later jobs are successful I thought all was well. All was well until I went to restore from incremental backups. We worked for two days (day and night work) to restore
from a corrupted virtual disk on our SQL Server 2008 R2. I suspect DPM had something to do with the corrupted virtual disk. All I know is that we never had this problem until installing DPM. Here is what we encountered when we went to restore
from the protection points:
* Restore jobs take a minimum of 15 minutes for jobs that are 45 MB or 2 GB.
* If you pick a backup from the list of recovery points that is not valid the job runs for 15 minutes and then "Failed".
* You cannot rerun the job because SQL Server 2008 has the table being recovered as <tablename> (recovering) and a retry will not work. Of course time is wasted while waiting
to see if it worked.
* Eventually you realize that even after dropping the table in the (recovering) mode in SQL that the restore point must be bad or possibly one of this failed recovery points.
* So begins the quest to start restoring recovery points one by one and 15 minutes by 15 minutes until you find one that actually restores to a SQL Instance.
* If you have 80 of these to do and you average trying three recovery points and each takes 15 minutes, not to mention the time to drop the table in SQL, well that time adds up to 3,600
minutes of trial and error. 60 hours of trial and error, wow not much of a savings using DPM over a SQL backup plan.
* And then you have to explain to your customers that their databases were restored but you do not know at what point the DB was restored.
All in all it seems like DPM concept is great but like many backups the backup plan looks good on paper but actually restoring a backup is quite a different matter.
I don't know if anyone has ever solved the problems presented in this forum but if they have then I wish they would post and if no one has solved the problem then shame on DPM.
Good luck everyone, but I for one have spent about two months on trying to protect and restore consistently. I have never had one day of consistent and reliable restore points. I
am going back to sql management plans for my backups. I have never, in 10 years had a sql generated backup fail me. Never.
gbl

DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
Andras

Hi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

The protection agent on was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)

I am having problems backing up data with DPM 2012. I keep getting this meesage. The protection agent on dpmServer was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
I can't understand what my error logs are trying to tell me please help.
NORMAL Begin new execution batch at task:(True)-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 28E0
10/07 22:47:42.979
16 ActiveJob.cs(851)
NORMAL Dispatching task for execution:True-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.979
16 ActiveJob.cs(581)
NORMAL Begin ExecuteTask:JobID=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, ItemID=a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.990
27 DatasourceServerTypeLock.cs(395)
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:42.991
01 DPMTaskController.cs(70)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL (job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, taskId=a2c49c70-696b-423d-8aaf-7898c1feb403) DPMTaskControllerHelper : ExecuteTask - CheckTaskStatus returned ReadyToExecute
042C 2AAC
10/07 22:47:42.993
01 TaskExecutor.cs(692)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting up Fsm: verb[3d859d8c-d0bb-4142-8696-c0d215203e0d]
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.021
01 TaskExecutor.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL ExecuteTask(job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d) - Starting task instance
042C 092C
10/07 22:47:43.023
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(406): TaskStart, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 092C
10/07 22:47:43.115
01 TaskInstance.cs(442)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Task: Initial transition enqueued, startState='Backup.StartState'
042C 1A54
10/07 22:47:43.116
27 BackupMachine.cs(1919)
A2C49C70-696B-423D-8AAF-7898C1FEB403
ACTIVITY BackupMachine : Starting machine execution
042C 2FC8
10/07 22:47:43.135
27 FindPrincipalServerBlock.cs(245)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Found Principal server for DatasourceId = a87a4dea-2e19-4456-ae3b-e5ce01c10351 Server= fs.org
042C 2AAC
10/07 22:47:43.146
27 DatasourceServerTypeLock.cs(395)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:43.147
27 OperationTypeLock.cs(582)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In LockServer() of ReplicationOperationTypeLock, returning lockStatus = AcquiredLock
042C 2AAC
10/07 22:47:43.156
27 OperationTypeLock.cs(628)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL UnlockServer() of ReplicationOperationTypeLock, returning
042C 2AAC
10/07 22:47:43.159
27 OperationTypeLock.cs(224)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting detailed error for operation lock failure to = PrmReplicaAgentDirtyShutdownDetected
042C 2AAC
10/07 22:47:43.160
27 OperationTypeLock.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In Lock() of ReplicationOperationTypeLock, returning lockStatus = DoNotWaitToAcquireLock
042C 2AAC
10/07 22:47:43.162
27 CheckConcurrencyBlock.cs(151)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Check concurrency block - Failure (abortedOnConflictingServerOperation=True)
042C 1F90
10/07 22:47:43.165
27 FsmBlock.cs(130)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Backup.CheckConcurrency.PT : <-- Exited FSM block with FAILURE (errorCode = ReplicaInvalidWithReason)
042C 1F90
10/07 22:47:43.419
27 BackupMachine.cs(2156)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING BackupMachine : FAILURE - BACKUP, errorCode=ReplicaInvalidWithReason
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Task Diagnostic Information - <?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TaskExecutionContext>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmWriterId>00000000-0000-0000-0000-000000000000</PrmWriterId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasourceId>a87a4dea-2e19-4456-ae3b-e5ce01c10351</PrmDatasourceId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmActiveNodeName>skafs.srvs.org</PrmActiveNodeName>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmLogicalReplicaId>342784c2-f783-487d-be78-154a5a17193f</PrmLogicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasetId>0cbb5339-0af5-4e70-9882-ed118a191890</PrmDatasetId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmPhysicalReplicaId>f440f18e-9436-4fed-9e7c-96cc1a9ebec1</PrmPhysicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaValidity>Invalid</PrmReplicaValidity>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaStatus>Idle</PrmReplicaStatus>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmOwnerLockId>00000000-0000-0000-0000-000000000000</PrmOwnerLockId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEVerb>DeltaReplicate</TEVerb>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorState>Backup.CheckConcurrencyPending</TEErrorState>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorDetails><?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:ErrorInfo ErrorCode="1073774947" DetailedCode="0" DetailedSource="0" ExceptionDetails="" xmlns:q1="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd">
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourceid" Value="a87a4dea-2e19-4456-ae3b-e5ce01c10351" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="dpmerrorcode" Value="30187" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="protectedgroup" Value="fs" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourcename" Value="P:\" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="servername" Value="fs.org" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="replicaid" Value="342784c2-f783-487d-be78-154a5a17193f" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </q1:ErrorInfo></TEErrorDetails>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </TaskExecutionContext>
042C 1F90
10/07 22:47:43.423
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(823): TaskStop, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 1F90
10/07 22:47:43.446
01 TaskExecutor.cs(843)
A2C49C70-696B-423D-8AAF-7898C1FEB403
FATAL Task stopped (state=Failed, error=ReplicaInvalidWithReason; 0; None), search "Task Diagnostic Information" for details.
042C 1F90
10/07 22:47:43.457
16 ActiveJob.cs(745)
WARNING Fail: Task 'a2c49c70-696b-423d-8aaf-7898c1feb403' failed with error during execution.
042C 1F90
10/07 22:47:43.457
16 Task.cs(235)
NORMAL Changing task state from 'GenerateWorkplan' -> 'Failed' (a2c49c70-696b-423d-8aaf-7898c1feb403)

Same problem on our two file-server: "The protection agent on was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)"
Problem started about 04 October 2013.
DPM Server and agents: 4.1.3417
There is event in fileservers application log:
Log Name:      Application
Source:        Application Error
Date:          09.10.2013 17:15:17
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      host1.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0xe7c
Faulting application start time: 0x01cec4d870046a62
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b1b1f6ed-30cb-11e3-acc1-00155d079701
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-09T10:15:17.000000000Z" />
    <EventRecordID>109798</EventRecordID>
    <Channel>Application</Channel>
    <Computer>host1.ourlocaldomain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>DPMRA.exe</Data>
    <Data>4.1.3417.0</Data>
    <Data>52011087</Data>
    <Data>FileWriterHelperPlugin.DLL</Data>
    <Data>4.1.3313.0</Data>
    <Data>50ad994d</Data>
    <Data>c0000005</Data>
    <Data>000000000002ba9f</Data>
    <Data>e7c</Data>
    <Data>01cec4d870046a62</Data>
    <Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
    <Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
    <Data>b1b1f6ed-30cb-11e3-acc1-00155d079701</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Application Error
Date:          09.10.2013 17:15:22
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      host2.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0x71c
Faulting application start time: 0x01cec4d870669e98
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b4680c67-30cb-11e3-ba10-001dd8b71c0e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-09T10:15:22.000000000Z" />
    <EventRecordID>54725</EventRecordID>
    <Channel>Application</Channel>
    <Computer>host2.ourlocaldomain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>DPMRA.exe</Data>
    <Data>4.1.3417.0</Data>
    <Data>52011087</Data>
    <Data>FileWriterHelperPlugin.DLL</Data>
    <Data>4.1.3313.0</Data>
    <Data>50ad994d</Data>
    <Data>c0000005</Data>
    <Data>000000000002ba9f</Data>
    <Data>71c</Data>
    <Data>01cec4d870669e98</Data>
    <Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
    <Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
    <Data>b4680c67-30cb-11e3-ba10-001dd8b71c0e</Data>
</EventData>
</Event>

DPM 2012 R2 (ID 104 Details: Internal error code: 0x809909FF)

We are running DPM 2012 R2 on Windows Server 2012 R2
We have a Protection Group:Servers (9 members) where 5 servers always give the same error message, when we try to run a synchronization job with consistency check. With other 4 server everything is fine. (All 9 servers: Windows Server 2012 R2)
All servers have "Windows Server Backup" feature installed
Error message:
The replica of Microsoft Hyper-V \Online\S022 Reports on S022 Reports.SynCrust.********.eu is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can
recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
Any help would be appreciated

Just wanted to add some further details to this thread...
As suggested in
this article, Windows Server Backup has been installed on all 3 cluster nodes. I have also tried disabling/enabling the WinRE agent, as it suggests, with no effect.
The Virtual Machine I am trying to back up is running Windows Server 2008 R2 with the latest updates, and has integration services version 6.3.9600 installed.
Additional searching led me to
this article, which states "DPM works seamlessly with Hyper-V VSS writer to ensure that consistent versions of virtual machines are captured and protected without affecting virtual machine access." It doesn't clarify if this is the method used
when backing up VMs stored in a CSV, however. Regardless, the Hyper-V VSS writer is not listed when issuing
vssadmin list providers
I went through the steps outlined in
this article to install the writer, but even after following said steps, the writer still does not appear as registered on the Windows Server 2012 R2 cluster node via the above command.
I should also mention that
this prereqs article mentions that the Hyper-V role should be installed on the DPM server. The hardware I'm using has an old AMD Sempron 3400+ CPU, so I'm unable to install this role on the DPM. The article states "DPM protects Hyper-V virtual
machines even without the role, but you cannot perform item-level recovery (ILR) unless the role is installed.", so it's doubtful that lack of the role would cause this issue; MindaugasKa, is the Hyper-V role installed on your DPM?
Despite the effort of upgrading my storage server to Windows Storage Server Standard 2012 R2, my cluster nodes to Windows Server 2012 R2 Datacenter, and my DPM to 2012 R2, the
nightmare continues...

Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data)

Dear all,
Can any one explain about this error,
2014-11-02 19:19:29.58   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-11-02 19:19:29.58   *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-11-02 19:19:29.58   Deleting log backup file. File: '\\Jdccb-mis\logshipping\JDCCBPROD_20141030134512.trn', Last Write Time (UTC): '10/30/2014 1:45:13 PM'
2014-11-02 19:19:29.60   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) *****
This errors comes on My Secondary server during log shipping and database goes to restore mode.
satish Kumar

Hi Krishnp,
These are the latest jobs in queue:
89 Quadro de Horários 28/6/2014 1:45 N/D Arquivar Configurações do Sistema Aguardando Processamento 0%
88 Quadro de Horários 28/6/2014 1:30 N/D Arquivar Modos de Exibição do Project Web App Aguardando Processamento 0%
87 Quadro de Horários 28/6/2014 1:00 N/D Arquivar Campos Personalizados Aguardando Processamento 0%
When I delete the last work automatically related are excluded.
Currently the queue is 406 jobs.
David Soares MCTS:MBS - MCTS - MCITP

I keep getting an error message saying "There was a problem connecting to the server. URLs with the type "file:" are not supported." Can someone help me get rid of it.

I keep getting an error message saying "There was a problem connecting to the server. URLs with the type "file:" are not supported" Can someone help me locate and get rid of this error.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Iphone 3Gs won't update i get an error message that says i am not connected to the internet. i HAVE TRIED ALL THE RECOMENDED TROUBLESHOOTING. ITUNES UPDATE WAS SUCCESSFUL AND I AM NOT HAVING ANY TROUBLE WITH THE ITUNES STORE. SO IT DOESN'T MAKE ANY SENSE

When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

Keep gettig this error message when trying to connect to Firefox The proxy server is refusing connections.

Redownloaded Firefox and continue to get this error message when trying to connect: The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.

Go to Options > Advanced > Network > Connection > Settings and choose "No proxy".
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
It is important that you keep IE updated. The information included with your question, indicates that you are using IE7; you should update to IE8 for your own protection. IE9 will not be made available for Windows XP.
*http://windows.microsoft.com/en-US/internet-explorer/products/ie/home

TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up

I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

same here no solutions

DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

Similar Messages

Maybe you are looking for