Data not shown properly

Data entered and loaded, but it doesn't appear in the grid or data forms. In the cell history and data audit the data is shown as entered and loaded. Do you know this phenomenon.

I would suggest you do a Data Extract, and see if any data is extracted. What this will also show you, is the POV.
It is not uncommon that the POV is at Entity Currency Total or similar, and as you may not have run a consolidation yet, the view feels empty. Also, set up a grid, and check the status. You should see CN flag which would indicate data has 'changed', and requires a consolidation.

Similar Messages

Icon image is not shown properly in LInux

Hi,
I am creating a JDialog as follows:
JDialog jd = new JDialog(frame, true);
in the frame, I have set the icon using
frame.setIconImage(image),
but the image set to this is not shown properly in Linux, but it is shown clearly in windows,
can anybody show some light here.
thanx,
Raj

I would put my money on the fact that since your application is timing out, it is dropping any state that your View Objects otherwise had before the application timeout.
So upon reauthorizing and reaccessing the application (and going directly to the detail page) the View Object is reinstantiated and only knows to go to its default data set which is 111.
If my assumption is correct, I don't think you could really implement this without a lot of trouble.

Data not shown in output but was in XML(diagnostics)

Hi Gurus,
I have created a custom account analysis report for payables by editing the XLAAARPT.xml and XLAAAR01.rtf then saving both into a new file name. Then, i tried to run the custom report and it was completed normally but when i check for the output some data are not shown in it. I then click Diagnostics and View Xml button and found out that the missing data are present in the XML. had anyone experienced the same before? Please help!
Thanks,
Jayson

Duplicate post.
Is editing of XLAAARPT.XML allowed
Please update the original thread instead of creating new one.
If you are not getting any response to your original thread, please log a SR.
Thanks,
Hussein

Report Painter - data not shown at first selection

Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
Britta

Hello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side.

Parameters are not shown properly

Hello,
I'm having an issue with the report's parameters when they are displayed in Internet Explorer.
The report was done with reporting services, but it's published in Sharepoint. When I open the report using the Sharepoint URL, the report's parameters are shown vertically, instead of horizontally. And the last parameter is being cut off, hidden under Internet
Explorer's status bar.
If I open the same report in Firefox, the parameter is displayed properly since scroll bars appear in all the parameters area, allowing me to scroll down and see the parameter's content.
Is there any way to fix the parameter's length so that it's displayed properly in Internet Explorer. I noticed that there is a resize box at the end of the parameter, but I can't find a way to have control over it.
Any help will be appreciated.
Thanks!

Hi monicanquiroga,
By default, the parameters are shown vertically in the Parameters pane which is located on the right of the report page in SharePoint Library. If there are many parameters in the report, there would be a scroll bar to enable you scroll down the last parameter.
In your scenario, it seems that the Parameter pane is not shown property in the IE browser. To fix this issue, here are two suggestions for your reference:
Please try to run IE in compatibility mode and run it as Administrator to check the issue again.
Considering the aspects of the setting or third party add-ons of Internet Explorer (IE). For more details, please see:
1. Click Tools -> Internet options.
2. Switch to the Security tab, click Local intranet, and then select Default level.
3. Switch to the Advanced tab, and click Restore advanced settings.
4. Temporarily disable third party add-ons. For detailed steps, please see the link:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Menutab not shown properly when second menu-item is selected.

When my menutabs are shown everything seems fine, but when you click the 2nd menu-tab the first menu-tab isn't shown properly anymore.
If I have a look at the code-source I can see that the first gif that's needed for the tabbed-view isn't present anymore if the 2nd menu-tab is clicked.
Could somebody explain the different skins that are used by the menuTab component so I know if maybe I've forget to define a specific in my custom skin?
Maybe somebody already used custom skins with your custom images for the tabbed view of menuTabs?
Regards,
Nathalie

>
Yes, you are right. In this sample program,
paintcomponent() is not really necessary, but it is in
the real program I am doing. So I can not get rid of
the paintComponent() method. In this paintComponent()
method I have added (add) and painted (paint) several
JComponent objects and this is the only one which
fails. I can not find the reason why.
Regards.
the reason is that on each call to paint , you add new components to the panel.
the scenario goes like this:
1. frame is made visible -> paintComponent() gets called - > fillPanel() gets called ,
so on the panel are the following 4 components:
one JButton
one JTextField
one JCheckBox
one ComboBox
2. click on the combobox, -> the popup list of the combo is displayed -> paintComponent() is called -> fillPanel() is called
so you have 8 components on the panel;
The popup list remain visible, is not actualy contained in the PanelNullLayout component due to the swing mecanics
3. you select an option in the list, the list becomes invisible, paint() gets called -> fillPanel getsCalled(),
so, again four componets are added. you have 12 components in the panel.
The components are painted in the order they have been added to therir container. The first combo box, that you first clicked, has selected index 1, but the last two have selected index 0. As these two are added after the first one, they are painted "above" first one, so you see the last comboBox added.
Add this code to the paintComponet method if you did not understand
// public void paintComponent(Graphics g) {
// super.paintComponent(g);
// fillPanell();
int count = getComponentCount();
System.out.println("Total components :" +count);
for ( int i = 0; i < count; i++ ) {
Component c = getComponent(i);
if ( c instanceof javax.swing.JComboBox ) {
System.out.println("Selected index in combo " i+" :"+( (JComboBox) c ).getSelectedIndex() );

Using SSRS Date Range- Data Not shown for date greater than by Analysis Services

Hello Friends,
I am using Date Range filters(Start and End Date) in my SSRS Report. The Problem is that if i am using the start date will be today, then the end date will be the future date by using Analysis Service as my Data Source, the report is not generated.
I don't know why it happens? If I give the date range filters before the current date, then the report will shown.
The problem is that the future date is not in my database. Could you please answer for this. I am struck in here,.
Table contains : 1-7-14 ,
2-7-14,
3-7-14,
If my Date Range will be 1st to 3 of 7th month, then the report shows the data.
if my date starts with 1st of the 7th month and ends in the future, then the report will not shown the 2nd and 3rd records...
Please teach me why?

Your question should be posted to the appropriate MSDN forum. This forum is for questions regarding Microsoft Certifications.

Images in button not shown properly

I have imported a quicktime file which was exported from FCP. The final cut portion is strictly jpeg files, no movies. I have made chapter markers in FCP. So in DVD Studio Pro, I created a button and chapter index, then selected a template. When I go to the menu(s) with chapters, the chapters are all correct. However, the photos in the button are not resized properly. Most of the heads are cut off. I have the button set with motion but turned it off and still photos not correct. How can I make DVD Studio Pro resize the photos properly? I right click the chapter button (it is not a drop zone), the option for align objects and distribute objects is not available. I am unable to click on it, thinking that is what I need to change. Any suggestions in how to get the photos to show completely in the button and not be cut off? I am very knew at this, only my second project, so please explain in detail.
Thanks!

Check your frame rate
are you declaring frame rate through XML or in external file ?
check your code again
or
may be you forget to upload some related files

Origianlly Flex Application not shown properly in google chrome browser

When I launch my flex application in Google Crome it does not fit properly. It falls short of the full height . On clicking 'restore down' button at top right corner followed by 'maximize' , then the application fully fits within the browser window.
Any input why it happens ??

We run our app in Mozilla. I need to check it out in IE.
I noticed in our app (one of my developers uses Safari on a Macintosh), that the tree control looks much different in Safari, and has huge gaps and blank spots in the text labels of the leaf nodes.
We logged it as a bug in our app, but it appears it's a bug in the FLEX framework??

Console apps are not shown properly

Hi!
I'm a new Arch convert, and so far I have (only!) one problem, but It's about to drive me crazy. console apps such as - mc, mp3blaster, elinks, are not shown corectly. (just in case you haven't understood me - I'm talking here when X not working) For example, in MC the two panels are mixing one onto the other. I hope someone is understanding what the hell I'm talking about...
My first thought was it has something to do with the consolefont. So I swithced back to default8x16.
setfont /usr/share/kbd/consolefont/default8x16.gz
it was my font on my old distro, gentoo, and there I didn't have any problems. It did not help.
I would love to try and google this, but due to my somewhat crappy English, I don't think it's possible. I simply don't know how to put this.
So, I hope someone in here will be able to help.

they work fine in a terminal window. But I do a lot of work without X runing, so it really bugs me.
I don't think there is any way for me to post a screen shot. I don't have a digital camera.
I think I heard once that you can do something with /dev/fb and convert it to jpeg. Is it true? if so, will someone please tell me how, so I can share my problems with the world.
================
UPDATE: I just found out about fbgrab.
Here is how it looks when I start working. It's not so bad actually.
[URL=http://img11.imageshack.us/my.php?image=pic6ff.png][/URL]
But when I start to move around, things gets messy.
[URL=http://img14.imageshack.us/my.php?image=pic25dk.png][/URL]
It's not an fbsplash issue as well.
[URL=http://img4.imageshack.us/my.php?image=pic37iu.png][/URL]
Elinks menus.
[URL=http://img4.imageshack.us/my.php?image=pic41uc.png][/URL]
Any ideas?

Time not shown properly in Day/Week view

The time intervals in Day/Week view are replaced by "[Day-of-Week] AM/PM" and time in event info panel is replaced by the date. Does anyone know of a way to fix this so that it shows the time properly?

I have a similar problem, but the solution above does not work for me: in the time, the minutes are displayed as if it was a decimal number. For example, 18:00 is displayed as 18:0, with just one 0.
This is particularly bad if the time is say 18:01 because then it is displayed as 18:1, which clearly leads to confusion, as it could be 18:10.
I have checked the time settings under international, but it makes no difference. Further, the problem is in all the views, i.e. day, week or month.
Any help would be most appreciated.

Data not aligned properly

Here's my rtf structure
group-by Product
<there's a table in here>
for-each Company
<there's a table in here>
for-each Community
<there's a table in here>
Data appear as below
Computer
<there's a table in here>
Company 1000
<there's a table in here>
Community A
<there's a table in here>
Community B
<there's a table in here>
Community C
<there's a table in here>
Company 2000
<there's a table in here>
Community D
<there's a table in here>
Community E
<there's a table in here>
Right now, the Community C table header for example, will be on page 1 and its table will be on page 2 because its table does not fit on page 1. So I selected for-each Community then paragraph -> Line and Page Breaks -> Keep with Next. Then it works but the data appears as below
Page 1
Computer
<there's a table in here>
Company 1000
<there's a table in here>
<THERE A BIG BLANK SPACE HERE>
Page 2
Community A
<there's a table in here>
Community B
<there's a table in here>
Community C
<there's a table in here>
The Community Headers stay with their tables but there's a big blank space between a Community A and Company 1000
I did the same Keep with Next with for-each Company and same result, I did it for group-by Product and same result, big blank space
How can we make it so data will flow with each other and if a table header (Product or Company or Community) does not fit on a page then it will go to the next page please?

Thanks Kavipriya for your help. The report shows data properly now.
Thanks Nagireddy for your offer.

Smart form header data not displaying properly

dear abapers,
     i need to display header..but am not able to get the data properly...

Hi,
     Take a Text Element at the place where u want header(Before main Window) or
     use appropriate Smart Style(font ,size,style) or
     Check the Table ,Template Layout (if used).

Data not shown in smartform

Hi All
Firstly I'm sorry to post the question below wrong forumn, Second it is not the basic question as the General forum tell me,
I want to print DMBTRNET,DMBTRGROS,DMBTRTDS in smart forms whereas these data calculated in SE38 as shown below,
IF WA_BSEG-BSCHL = '31'.
   WA_BSEG1-DMBTRNET = WA_BSEG-DMBTR.
ELSEIF WA_BSEG-BSCHL = '40'.
   WA_BSEG1-DMBTRGROS = WA_BSEG-DMBTR.
ELSEIF WA_BSEG-BSCHL = '50'.
   WA_BSEG1-DMBTRTDS = WA_BSEG-DMBTR.
ELSE.
   WA_BSEG1-DMBTROTHER = WA_BSEG-DMBTR.
ENDIF.
WA_BSEG1-BSCHL = WA_BSEG-BSCHL.
If u identified that I m not suitable to asked any question in your forum then I am again sorry.
Thanks And Regards
sanjeev Goel

Hi,
If you are retrieving the above data in your print program (SE38), then you can use global variables and then pass those variables to smartform.
While displaying these you will have to create text elements and pass the above variables here in text element.
If you are not retrieving the above data in print program, then you can retrieve it in smartform as well using program lines and then pass the respective variables to respective text elements.
Hope its clear to you.
Thanks,
Archana

Leaving Action Date not refleting properly

Dear Expert,
We have implementing Germany Payroll for our client. We have created the actions like - Deputation Initiation, End of Deputation which is similar to Hiring & Leaving.
While executing End of Deputation action, system is not taking the actual date given in all the info types. For Ex : End of Deputation date is 31.08.2008. But while excecuting the action IT0000 & IT0001 system is taking end date as 31.08.2008. But IT0006, IT0009, IT0014 & the customised info type which we have cretaed are taking the end date as 30.08.2008.
Please note that we need to pay salary for 31.08.2008. Please suggest how can I get froward??
Thanks a ton in advance
Regards,
Damodar Pai

Hi Damodar,
When you are running End Of Deputation action( Leaving action); on initial PA40 screen you enter 31.8.2008 in the From field and then run the action. The system will automatically take the End Of Deputation Action Date as 1.9.2008.
That means the Last working day date of employee is 31.8.2008 and the salary will be paid till 31.8.2008
Check in table T529A; in the Date field entry should be 1( specified filed is end date of old records)

Data not shown properly

Similar Messages

Maybe you are looking for