Data Redaction in 11.2.0.4 DB

Hi,
I downloaded the latest SQL Developer 4.0.0.13 version from OTN and am connected to a 11.2.0.4 database. When I try to create a data redaction policy, it throws an error stating "Grants missing on redaction_policies and redaction_columns." even though these privileges are granted to the user. This problem arises only from the GUI popup of add/alter redaction policy, but works when using the DBMS_REDACT.ADD_POLICY method. Anybody know how to fix this error ?
-Regards
Prasad

I believe you need to get these privileges assigned to you as the <user>
grant select on sys.redaction_policies to <user>;
grant select on sys.redaction_columns to <user>;

Similar Messages

Data Redaction policy issue

Hi, how can i apply to a redaction policy to multiple user for example the code below
DBMS_REDACT.ADD_POLICY(
   object_schema          => 'TEST1',
   object_name            => 'redacttest',
   column_name            => 'credit_card',
   column_description     => 'credit card column redact',
   policy_name            => 'redact_test_credit_comm',
   policy_description     => 'Partially redacts the credit_card column',
   function_type          => DBMS_REDACT.PARTIAL,
   function_parameters    => '9,1,6',
   expression             => 'SYS_CONTEXT(''USERENV'',''SESSION_USER'') = ''TEST2''');
As the code i can only apply the policy to user TEST2, how can i apply this policy to user TEST2, TEST3, TEST4, TEST5...... so on
Thanks

DBMS_REDACT.ADD_POLICY(
   object_schema          => 'TEST1',
   object_name            => 'redacttest',
   column_name            => 'credit_card',
   column_description     => 'credit card column redact',
   policy_name            => 'redact_test_credit_comm',
   policy_description     => 'Partially redacts the credit_card column',
   function_type          => DBMS_REDACT.PARTIAL,
   function_parameters    => '9,1,6',
   expression             => 'SYS_CONTEXT(''USERENV'',''SESSION_USER'') in (''TEST2'',''TEST3'')');

ISE 1.2 Guest Access session expired

We have set up the ISEs to allow wired guest users to logon with CWA but every time we get
"Your session has expired. Sign on again".
We successfully get to the portal and can logon, change password, accept conditions but then we just get the session expired page.
From the switch (some data redacted fro privacy):
sw01#sh auth ses int f0/1
            Interface: FastEthernet0/1
          MAC Address: 0021.xxda.xx28
           IP Address: xxx.xx.40.45
            User-Name: 00-21-xx-DA-xx-28
               Status: Authz Success
               Domain: DATA
       Oper host mode: multi-domain
     Oper control dir: both
        Authorized By: Authentication Server
          Vlan Policy: 901
              ACS ACL: xACSACLx-IP_GuestWired_ISE_Portal_Access-53182da8
     URL Redirect ACL: dot1x_WEBAUTH-REDIRECT
         URL Redirect: https://guest.ourdomain.com:8443/guestportal/gateway?sessionId=AC1262FB000000FA0FCEFDB8&portal=TT_GuestPortal&action=cwa
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: AC1262FB000000FA0FCEFDB8
      Acct Session ID: 0x000001CF
               Handle: 0x370000FB
Runnable methods list:
       Method   State
       dot1x    Failed over
       mab      Authc Success
The ISE reports a failed login
Event
5418 Guest Authentication Failed
Failure Reason
86017
Now the reason appears to be that the guest portal being accesed is on an ISE in our DMZ but the RADIUS/MAB authentication is done by our internal ISEs (all ISEs are part of the same cluster however). This is because the NAD is a switch and its management interface is on the inside of the network while the guest VLAN is in a DMZ. If we authenticate the RADIUS and guest on the same ISE (by breaking routing/security) then the access is granted and it all works corrcetly.
We are summarising that the session ID sent by the RADIUS ISE server is not avaialble to the Guest Portal ISE server so the session ID does not exist in the session cache.
So does the guest portal ISE server have to be the same ISE server that does the RADIUS/MAB session generation? There is no obvious way to tie a FQDN (e.g. guest.ourdomain.com) to the ISE used by the NAD.
Should the session ID not be shared across all enforcement nodes?
Any other ideas or thoughts?
Chris Davis

Thanks Jan, do you know if this is by design, even across nodes in node groups? I'm guessing that Bug CSCul10677 is the same issue.
Thing is, it rather makes the CWA static IP/Hostname option redundant/useless in a resilient configuration. It also means that the NAD must use the guest network for dot1x traffic or that the guest nework must be able to route over/into the internal network neither of which appear to be ideal from a security perspective...

Using EFI password "full" security isn't working

Hi,
I'm trying to use the EFI Password Utility to prohibit any attempt to boot my MacBook Pro without the correct password. I used the utility available on the MacBook Pro's supplied install DVD, and so far have successfully prevented the use of any keystrokes on boot without the correct password (ie. "command" mode). However, I am unable to set the EFI to prohibit any attempt to boot.
Apple documents in its, "Mac OS X: Security Configuration - For Mac OS X Version 10.6 Snow Leopard" PDF manual that,
You can also configure EFI from the command line by using the nvram tool. […]
You can set the security mode to one of the following values:
     Full: This value requires a password to start up or restart your computer. It also requires a password to make changes to EFI.
For example, to set the security-mode to full you would use the following command:
     $ sudo nvram security-mode=full
I applied this setting, but it doesn't appear to be working. The redacted output of "nvram -x -p" is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>EFICapsule_Result</key>
          <data>
          REDACTED
          </data>
          <key>SmcFlasherResult</key>
          <data>
          REDACTED
          </data>
          <key>SystemAudioVolume</key>
          <data>
          REDACTED
          </data>
          <key>boot-image</key>
          <data>
          REDACTED
          </data>
          <key>efi-apple-payload0</key>
          <data>
          REDACTED
          </data>
          <key>efi-apple-payload0-data</key>
          <data>
          REDACTED
          </data>
          <key>efi-apple-recovery</key>
          <data>
          REDACTED
          </data>
          <key>efi-boot-device</key>
          <data>
          REDACTED
          </data>
          <key>efi-boot-device-data</key>
          <data>
          REDACTED
          </data>
          <key>gpu-policy</key>
          <data>
          REDACTED
          </data>
          <key>prev-lang:kbd</key>
          <data>
          REDACTED
          </data>
          <key>security-mode</key>
          <string>full</string>
</dict>
</plist>
What makes it confusing is that Apple specifies later on the same page (56) that the the term passed to the "security-mode" option should be encased in quotes:
# Secure startup by setting security-mode. Replace $mode-value with # "command" or "full."
     sudo nvram security-mode="$mode-value"
So, assuming that I may have used the wrong version of the command, and thereby not applied the setting correctly, I deleted the "security-mode" key using:
sudo nvram -d security-mode
I then re-applied the setting using:
sudo nvram security-mode=full
because I was confident that, initially, I had used the version with quotes. However, it's made no difference - booting the machine does not require entry of an EFI password.
Oddly, the EFI still prevents the use of keystrokes (ie. "command" mode), so it's definitely functional; I just can't tell it to use "full" mode. Also, I note that "security-mode" is the only key to have a "string" child not a "data" child - is this indicative of a problem?
Any advice?

I've got the same problem as OP but I'm not concerning myself with the physical security of my device--an entirely separate topic altogether.
Essentially, I know that with physical access to a Mac box it's possible to enter single user mode and change the password. I also know there is a way to prevent that ability by changing the default login credentials I just don't remember the phrase of what I'm looking for. I know that I have a pdf on hardening snow leopard which probably has information on how to restrict password changes when in single user mode, but I can't find it.
Here's some stuff that should at least get you started in the right direction:
http://support.apple.com/kb/HT1352
http://lists.apple.com/archives/fed-talk/2011/Feb/msg00022.html
Definitely read:
http://www.nsa.gov/ia/_files/factsheets/macosx_10_6_hardeningtips.pdf
Depending how much time you want to spend on this, there's also a book by Charlie Miller called "Mac Hackers Handbook" that's worth the read--although I have yet to do completely so myself. I did get to see his talk at DefCon 2011 and it was pretty amazing- he developed a technique to essentially make a Mac laptop battery explode from a remote location-- although he never has actually done it for fear of...you know...actually destroying his computer. lol. The next time you hear a MacTard bragging about how OSX is a secure platform, be sure to bring that up. Also distinguish between viruses and malware in general the next time you talk to a genius about mac security- we recently discovered a rootkit on one of the Macs on our network.
Back to the topic--If you're going to go through the effort of securing one aspect of your box, you mind as well keep going with it if you have legitimate reasons to worry about unauthorized access.
Another awesome resource is the Electronic Frontier Foundation:
https://www.eff.org
https://ssd.eff.org/risk
They have guides about nearly everything concerning online anonymity and/or security and they're really good about keeping it 'human readable' - ie understandable to the average user. I'll try to find that pdf and upload it if I do. Those other resources should point you in the right direction- if not explicitly answer your question. Let me know if you find anything too . Help me help you.
<Edited by Host>

12c: redaction_policies table not visible in dba_tables, dictionary

The table redaction_policies is visible when we describe it or search tab but is not listed in dictionary or dba_tables.
NCDB@NCDB> desc redaction_policies
Name                    Null?    Type
OBJECT_OWNER            NOT NULL VARCHAR2(128)
OBJECT_NAME             NOT NULL VARCHAR2(128)
POLICY_NAME             NOT NULL VARCHAR2(128)
EXPRESSION              NOT NULL VARCHAR2(4000)
ENABLE                           VARCHAR2(7)
POLICY_DESCRIPTION               VARCHAR2(4000)
NCDB@NCDB> select table_name from dba_tables where table_name like '%REDA%';
no rows selected
NCDB@NCDB> select table_name from dictionary where table_name like '%REDA%';
no rows selected
NCDB@NCDB> select tname from tab where tname like '%REDA%';
TNAME
REDACTION_COLUMNS
REDACTION_POLICIES
REDACTION_VALUES_FOR_TYPE_FULL
what could be the reason?
Regards

I'd say I wouldn't expect it to be returned from dba_tables, since it's a datadictionary view, just like V$SESSION etc.
SQL> select * from dba_tables where table_name = 'V$SESSION';
no rows selected
However, based on the docs:
Configuring Oracle Data Redaction Policies
I'd expect to see it returned from dictionary, just like:
SQL> select * from dictionary where table_name = 'V$SESSION';
TABLE_NAME
COMMENTS
V$SESSION
Synonym for V_$SESSION
1 row selected.
But, since I'm not on 12c now, I can't really add much more.

ALDSP 3.2 Available for Download

New features include mutators for updates, data redaction via encryption, and more.
ALDSP 3.2 runs on WebLogic Server 10mp1.
http://commerce.bea.com/showproduct.jsp?family=AQDSP&major=3.2&minor=0
The features found in ALDSP 3.2 will be availble shortly on Weblogic 9 in the upcoming ALDSP 3.0.1 release.

Just hosting - there are some neat new UI upgrades. Worth checking out.
Apex 2.2 Release Date

Will zeroizing and regenerating the Default-RSA-Key affect any other general purpose keys on my ASA 5545x?

I have an ASA 5545x that is a production device for receiving all AnyConnect VPN traffic for our organization. We purchased and installed a Comodo certificate to create the trust level necessary for our employees to connect. I'm attempting to enable SSH on the device for management purposes, but the current <Default-RSA-Key> does not allow me to initiate a valid SSH session. I have encountered this issue on other ASAs within our organization, and it hasn't been an issue to simply zeroize the current key and regenerate it to restore the ability to SSH to the devices. Where the snag comes in is that this 5545x is the only ASA that has a key installed that wasn't self signed. With that in mind, I have a few questions about whether 3rd-party signed keys are dependent on the self-signed keys on the device. I intend to zeroize both the <Default-RSA-Key> and the <Default-RSA-Key>.server certificates if they will not affect my VPN-associated Comodo key.
Does the Comodo key depend on other keys existing on the ASA?
Am I free to zeroize only the <Default-RSA-Key> without affecting the VPN associated Comodo key?
Here is the result of the command "show crypto key mypubkey rsa" :
Key pair was generated at: 12:02:29 CDT Aug 19 2014
Key name: <Default-RSA-Key>
Usage: General Purpose Key
Modulus Size (bits): 1024
Key Data:
<Redacted>
Key pair was generated at: 10:16:52 CDT Sep 20 2012
Key name: my.comodo.key
Usage: General Purpose Key
Modulus Size (bits): 2048
Key Data:
<Redacted>
Key pair was generated at: 01:35:42 CDT Jul 30 2014
Key name: <Default-RSA-Key>.server
Usage: Encryption Key
Modulus Size (bits): 768
Key Data:
<Redacted>
Thank you to any and all that assist me in understanding how the ASA handles certificate keys.

As long as the Comodo-signed certificate is bound to the my.comodo.key private key (i.e. you used that key when generating the certificate signing request), you should be fine to zeroize the Default-RSA-Key. The latter should ideally only be used for ssh access.

RMAN duplicate target using set until telling me it can not find data files

I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.
I had a request to go back a few weeks and the backup files (I do compressed backups to disk) were on tape. I had my backup person restore my backup directory for the source DB as it looked on a certain day (May 28). I have an 8 day retention policy and so the backup files that were restored showed files all the way back to 5/20 ( includes the point I want to use in my set until clause).
However, whenever I try to execute the rman clone, it tells me for each datafile:
RMAN-06023: no backup or copy of datafile 1 found to restore
Like I said, I am able to do this for a current backup that is on disk. I moved the backup files to the source db server and it works fine. However, from these files restored from tape it errors.
Here is the RMAN script:
spool log to c:\temp\clone_CSPROD_CSPRSUM1.log;
#connect to catalog <catalog info>
# target is the source and auxiliary is destination
#connect target <put in source info here>
#connect auxiliary /
run {
allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
##Archivelog number get from sql archive log list command
#set until sequence 831;
set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
duplicate target database to CSPRSUM1 nofilenamecheck
logfile
group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
Exit
Here is the output:
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog <redacted info>>
2> # target is the source and auxiliary is destination
3> #connect target <redacted info>
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> #set until sequence 831;
14> set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
starting full resync of recovery catalog
full resync complete
allocated channel: d1
channel d1: SID=534 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=532 device type=DISK
allocated channel: d4
channel d4: SID=531 device type=DISK
allocated channel: a1
channel a1: SID=530 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 15-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 260398799;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
"+data";
set newname for datafile 3 to
"+data";
set newname for datafile 4 to
"+data";
set newname for datafile 5 to
"+data";
set newname for datafile 6 to
"+data";
set newname for datafile 7 to
"+data";
set newname for datafile 8 to
"+data";
set newname for datafile 9 to
"+data";
set newname for datafile 10 to
"+data";
set newname for datafile 11 to
"+data";
set newname for datafile 12 to
"+data";
set newname for datafile 13 to
"+data";
set newname for datafile 14 to
"+data";
set newname for datafile 15 to
"+data";
set newname for datafile 16 to
"+data";
set newname for datafile 17 to
"+data";
set newname for datafile 18 to
"+data";
set newname for datafile 19 to
"+data";
set newname for datafile 20 to
"+data";
set newname for datafile 21 to
"+data";
set newname for datafile 22 to
"+data";
set newname for datafile 23 to
"+data";
set newname for datafile 24 to
"+data";
set newname for datafile 25 to
"+data";
set newname for datafile 26 to
"+data";
set newname for datafile 27 to
"+data";
set newname for datafile 28 to
"+data";
set newname for datafile 29 to
"+data";
set newname for datafile 30 to
"+data";
set newname for datafile 31 to
"+data";
set newname for datafile 32 to
"+data";
set newname for datafile 33 to
"+data";
set newname for datafile 34 to
"+data";
set newname for datafile 35 to
"+data";
set newname for datafile 36 to
"+data";
set newname for datafile 37 to
"+data";
set newname for datafile 38 to
"+data";
set newname for datafile 39 to
"+data";
set newname for datafile 40 to
"+data";
set newname for datafile 41 to
"+data";
set newname for datafile 42 to
"+data";
set newname for datafile 43 to
"+data";
set newname for datafile 44 to
"+data";
set newname for datafile 45 to
"+data";
set newname for datafile 46 to
"+data";
set newname for datafile 47 to
"+data";
set newname for datafile 48 to
"+data";
set newname for datafile 49 to
"+data";
set newname for datafile 50 to
"+data";
set newname for datafile 51 to
"+data";
set newname for datafile 52 to
"+data";
set newname for datafile 53 to
"+data";
set newname for datafile 54 to
"+data";
set newname for datafile 55 to
"+data";
set newname for datafile 56 to
"+data";
set newname for datafile 57 to
"+data";
set newname for datafile 58 to
"+data";
set newname for datafile 59 to
"+data";
set newname for datafile 60 to
"+data";
set newname for datafile 61 to
"+data";
set newname for datafile 62 to
"+data";
set newname for datafile 63 to
"+data";
set newname for datafile 64 to
"+data";
set newname for datafile 65 to
"+data";
set newname for datafile 66 to
"+data";
set newname for datafile 67 to
"+data";
set newname for datafile 68 to
"+data";
set newname for datafile 69 to
"+data";
set newname for datafile 70 to
"+data";
set newname for datafile 71 to
"+data";
set newname for datafile 72 to
"+data";
set newname for datafile 73 to
"+data";
set newname for datafile 74 to
"+data";
set newname for datafile 75 to
"+data";
set newname for datafile 76 to
"+data";
set newname for datafile 77 to
"+data";
set newname for datafile 78 to
"+data";
set newname for datafile 79 to
"+data";
set newname for datafile 80 to
"+data";
set newname for datafile 81 to
"+data";
set newname for datafile 82 to
"+data";
set newname for datafile 83 to
"+data";
set newname for datafile 84 to
"+data";
set newname for datafile 85 to
"+data";
set newname for datafile 86 to
"+data";
set newname for datafile 87 to
"+data";
set newname for datafile 88 to
"+data";
set newname for datafile 89 to
"+data";
set newname for datafile 90 to
"+data";
set newname for datafile 91 to
"+data";
set newname for datafile 92 to
"+data";
set newname for datafile 93 to
"+data";
set newname for datafile 94 to
"+data";
set newname for datafile 95 to
"+data";
set newname for datafile 96 to
"+data";
set newname for datafile 97 to
"+data";
set newname for datafile 98 to
"+data";
set newname for datafile 99 to
"+data";
set newname for datafile 100 to
"+data";
set newname for datafile 101 to
"+data";
set newname for datafile 102 to
"+data";
set newname for datafile 103 to
"+data";
set newname for datafile 104 to
"+data";
set newname for datafile 105 to
"+data";
set newname for datafile 106 to
"+data";
set newname for datafile 107 to
"+data";
set newname for datafile 108 to
"+data";
set newname for datafile 109 to
"+data";
set newname for datafile 110 to
"+data";
set newname for datafile 111 to
"+data";
set newname for datafile 112 to
"+data";
set newname for datafile 113 to
"+data";
set newname for datafile 114 to
"+data";
set newname for datafile 115 to
"+data";
set newname for datafile 116 to
"+data";
set newname for datafile 117 to
"+data";
set newname for datafile 118 to
"+data";
set newname for datafile 119 to
"+data";
set newname for datafile 120 to
"+data";
set newname for datafile 121 to
"+data";
set newname for datafile 122 to
"+data";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 15-JUN-11
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/15/2011 11:21:42
RMAN-01005: not all datafiles have backups that can be recovered to scn 260398799
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 122 found to restore
RMAN-06023: no backup or copy of datafile 121 found to restore
RMAN-06023: no backup or copy of datafile 120 found to restore
RMAN-06023: no backup or copy of datafile 119 found to restore
RMAN-06023: no backup or copy of datafile 118 found to restore
RMAN-06023: no backup or copy of datafile 117 found to restore
RMAN-06023: no backup or copy of datafile 116 found to restore
RMAN-06023: no backup or copy of datafile 115 found to restore
RMAN-06023: no backup or copy of datafile 114 found to restore
RMAN-06023: no backup or copy of datafile 113 found to restore
RMAN-06023: no backup or copy of datafile 112 found to restore
RMAN-06023: no backup or copy of datafile 111 found to restore
RMAN-06023: no backup or copy of datafile 110 found to restore
RMAN-06023: no backup or copy of datafile 109 found to restore
RMAN-06023: no backup or copy of datafile 108 found to restore
RMAN-06023: no backup or copy of datafile 107 found to restore
RMAN-06023: no backup or copy of datafile 106 found to restore
RMAN-06023: no backup or copy of datafile 105 found to restore
RMAN-06023: no backup or copy of datafile 104 found to restore
RMAN-06023: no backup or copy of datafile 103 found to restore
RMAN-06023: no backup or copy of datafile 102 found to restore
RMAN-06023: no backup or copy of datafile 101 found to restore
RMAN-06023: no backup or copy of datafile 100 found to restore
RMAN-06023: no backup or copy of datafile 99 found to restore
RMAN-06023: no backup or copy of datafile 98 found to restore
RMAN-06023: no backup or copy of datafile 97 found to restore
RMAN-06023: no backup or copy of datafile 96 found to restore
RMAN-06023: no backup or copy of datafile 95 found to restore
RMAN-06023: no backup or copy of datafile 94 found to restore
RMAN-06023: no backup or copy of datafile 93 found to restore
RMAN-06023: no backup or copy of datafile 92 found to restore
RMAN-06023: no backup or copy of datafile 91 found to restore
RMAN-06023: no backup or copy of datafile 90 found to restore
RMAN-06023: no backup or copy of datafile 89 found to restore
RMAN-06023: no backup or copy of datafile 88 found to restore
RMAN-06023: no backup or copy of datafile 87 found to restore
RMAN-06023: no backup or copy of datafile 86 found to restore
RMAN-06023: no backup or copy of datafile 85 found to restore
RMAN-06023: no backup or copy of datafile 84 found to restore
RMAN-06023: no backup or copy of datafile 83 found to restore
RMAN-06023: no backup or copy of datafile 82 found to restore
RMAN-06023: no backup or copy of datafile 81 found to restore
RMAN-06023: no backup or copy of datafile 80 found to restore
RMAN-06023: no backup or copy of datafile 79 found to restore
RMAN-06023: no backup or copy of datafile 78 found to restore
RMAN-06023: no backup or copy of datafile 77 found to restore
RMAN-06023: no backup or copy of datafile 76 found to restore
RMAN-06023: no backup or copy of datafile 75 found to restore
RMAN-06023: no backup or copy of datafile 74 found to restore
RMAN-06023: no backup or copy of datafile 73 found to restore
RMAN-06023: no backup or copy of datafile 72 found to restore
RMAN-06023: no backup or copy of datafile 71 found to restore
RMAN-06023: no backup or copy of datafile 70 found to restore
RMAN-06023: no backup or copy of datafile 69 found to restore
RMAN-06023: no backup or copy of datafile 68 found to restore
RMAN-06023: no backup or copy of datafile 67 found to restore
RMAN-06023: no backup or copy of datafile 66 found to restore
RMAN-06023: no backup or copy of datafile 65 found to restore
RMAN-06023: no backup or copy of datafile 64 found to restore
RMAN-06023: no backup or copy of datafile 63 found to restore
RMAN-06023: no backup or copy of datafile 62 found to restore
RMAN-06023: no backup or copy of datafile 61 found to restore
RMAN-06023: no backup or copy of datafile 60 found to restore
RMAN-06023: no backup or copy of datafile 59 found to restore
RMAN-06023: no backup or copy of datafile 58 found to restore
RMAN-06023: no backup or copy of datafile 57 found to restore
RMAN-06023: no backup or copy of datafile 56 found to restore
RMAN-06023: no backup or copy of datafile 55 found to restore
RMAN-06023: no backup or copy of datafile 54 found to restore
RMAN-06023: no backup or copy of datafile 53 found to restore
RMAN-06023: no backup or copy of datafile 52 found to restore
RMAN-06023: no backup or copy of datafile 51 found to restore
RMAN-06023: no backup or copy of datafile 50 found to restore
RMAN-06023: no backup or copy of datafile 49 found to restore
RMAN-06023: no backup or copy of datafile 48 found to restore
RMAN-06023: no backup or copy of datafile 47 found to restore
RMAN-06023: no backup or copy of datafile 46 found to restore
RMAN-06023: no backup or copy of datafile 45 found to restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 41 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> Exit
Recovery Manager complete.
Edited by: kerrygm on Jun 15, 2011 11:36 AM

Maybe making progress.
I got into RMAN and did a List backup command. In looking at the output, I see that it does have the 5/20 backup showing. Here is part of the output:
BS Key Type LV Size Device Type Elapsed Time Completion Time
965689 Full 19.86M DISK 00:00:01 16-JUN-11
BP Key: 967942 Status: AVAILABLE Compressed: NO Tag: TAG20110616T231223
Piece Name: F:\BACKUPS\CSPROD\C-368871413-20110616-01
SPFILE Included: Modification time: 16-JUN-11
SPFILE db_unique_name: CSPROD
Control File Included: Ckp SCN: 369596068 Ckp time: 16-JUN-11
BS Key Size Device Type Elapsed Time Completion Time
966218 403.84M DISK 00:00:00 20-MAY-11
BP Key: 967842 Status: AVAILABLE Compressed: YES Tag: TAG20110520T231012
Piece Name: F:\BACKUPS\CSPROD\A1\CSPROD_ARCH_5844
List of Archived Logs in backup set 966218
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2112 237027300 20-MAY-11 237046947 20-MAY-11
1 2113 *237046947* 20-MAY-11 237059284 20-MAY-11
1 2114 237059284 20-MAY-11 237216514 20-MAY-11
1 2115 237216514 20-MAY-11 237709545 20-MAY-11
1 2116 237709545 20-MAY-11 237722825 20-MAY-11
1 2117 237722825 20-MAY-11 237730431 20-MAY-11
1 2118 237730431 20-MAY-11 237860199 20-MAY-11
I then changed my rman script to use the *237046947* SCN number that says it is from 5/20. I them kicked off my rman script and got the following result.
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog 'rmancat/rmancat@rmancat';
2> # target is the source and auxiliary is destination
3> #connect target sys/<pwd>@csprod
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> set until sequence 237046947;
14> ##set until time "to_date('2011-05-20 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
allocated channel: d1
channel d1: SID=532 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=531 device type=DISK
allocated channel: d4
channel d4: SID=555 device type=DISK
allocated channel: a1
channel a1: SID=534 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 17-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 373021170;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
Starting restore at 17-JUN-11
channel d1: starting datafile backup set restore
channel d1: specifying datafile(s) to restore from backup set
channel d1: restoring datafile 00003 to +DATA
channel d2: restoring datafile 00122 to +DATA
channel d2: reading from backup piece F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149
channel d3: starting datafile backup set restore
channel d3: specifying datafile(s) to restore from backup set
channel d3: restoring datafile 00002 to +DATA
channel d3: restoring datafile 00020 to +DATA
channel d4: restoring datafile 00120 to +DATA
channel d4: reading from backup piece F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147
channel d1: piece handle=F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 tag=TAG20110616T230013
channel d1: restored backup piece 1
channel d1: restore complete, elapsed time: 00:01:15
channel d4: piece handle=F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147 tag=TAG20110616T230013
channel d4: restored backup piece 1
channel d4: restore complete, elapsed time: 00:03:15
channel d2: piece handle=F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149 tag=TAG20110616T230013
channel d2: restored backup piece 1
channel d2: restore complete, elapsed time: 00:03:35
channel d3: piece handle=F:\BACKUPS\CSPROD\D1\CSPROD_DATA_6146 tag=TAG20110616T230013
channel d3: restored backup piece 1
channel d3: restore complete, elapsed time: 00:04:55
Finished restore at 17-JUN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "CSPRSUM1" RESETLOGS ARCHIVELOG
MAXLOGFILES 23
MAXLOGMEMBERS 3
MAXDATAFILES 1021
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log' ) SIZE 50 M ,
GROUP 2 ( '+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log' ) SIZE 50 M ,
GROUP 3 ( '+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log' ) SIZE 50 M
DATAFILE
'+DATA/csprsum1/datafile/system.1535.754067379'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy RECID=1 STAMP=754067676 file name=+DATA/csprsum1/datafile/sysaux.1536.754067379
datafile 121 switched to datafile copy
input datafile copy RECID=120 STAMP=754067677 file name=+DATA/csprsum1/datafile/waapp.1653.754067403
datafile 122 switched to datafile copy
input datafile copy RECID=121 STAMP=754067677 file name=+DATA/csprsum1/datafile/cu_custom.1549.754067381
contents of Memory Script:
set until scn 373021170;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-JUN-11
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '+DATA/csprsum1/datafile/system.1535.754067379'
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/17/2011 15:14:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 3818 and starting SCN of 372868482 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3817 and starting SCN of 372685133 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3816 and starting SCN of 372593528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3815 and starting SCN of 372374385 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3814 and starting SCN of 372325053 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3813 and starting SCN of 372316138 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3812 and starting SCN of 372249619 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3811 and starting SCN of 371775981 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3810 and starting SCN of 371643855 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3809 and starting SCN of 371614442 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3808 and starting SCN of 371432892 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3807 and starting SCN of 371121955 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3806 and starting SCN of 371047786 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3805 and starting SCN of 371029095 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3804 and starting SCN of 371018252 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3803 and starting SCN of 370947755 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3802 and starting SCN of 370857440 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3801 and starting SCN of 370814417 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3800 and starting SCN of 370797061 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3799 and starting SCN of 370756569 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3798 and starting SCN of 370746833 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3797 and starting SCN of 370746693 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3796 and starting SCN of 370746568 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3795 and starting SCN of 370746068 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3794 and starting SCN of 370745451 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3793 and starting SCN of 370733767 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3792 and starting SCN of 370674629 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3791 and starting SCN of 370501026 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3790 and starting SCN of 370498513 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3789 and starting SCN of 370497977 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3788 and starting SCN of 370497635 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3787 and starting SCN of 370497319 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3786 and starting SCN of 370496938 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3785 and starting SCN of 370495428 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3784 and starting SCN of 370491173 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3783 and starting SCN of 370390074 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3782 and starting SCN of 370385574 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3781 and starting SCN of 370385310 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3780 and starting SCN of 370385044 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3779 and starting SCN of 370368486 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3778 and starting SCN of 370333960 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3777 and starting SCN of 370330980 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3776 and starting SCN of 370327876 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3775 and starting SCN of 370174433 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3774 and starting SCN of 370148373 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3773 and starting SCN of 370147821 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3772 and starting SCN of 370147623 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3771 and starting SCN of 370141528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3770 and starting SCN of 369711271 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3769 and starting SCN of 369621694 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3768 and starting SCN of 369595614 found to restore
RMAN> Exit
Recovery Manager complete.
What I am not sure is if the SCN I used in my set until sequence command was from 5/20, when I look at the backup pieces that it is reading to restore from, they appear to be from backup files taken from June.
(e.g channel d1: reading from backup piece F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 -- this is a 6/16 backup file).
Also, as you can see it was not able to do a media recovery.
Thanks in advance for your help.

Page Numbers Not Appearing in Data Merge Document?

Hello, hopefully someone can help. I am pretty new to InDesign but learning a lot. I am creating a member directory of about 200 pages (about 2800 records merged from .csv to InDesign 6). Everything is working fine with the merge, except generating the page numbers. I tried adding page number at the bottom of the page to the master BEFORE merging. But if I do that, it greys out the "multiple records per page" option when trying to perform the Data Merge (using "Create merged Document"). So, I tried adding the page number to the A-master AFTER creating the merged document, but the page number is not appearing on any of the pages. There must be a way to do this, can anyone help?
(FYI - to generate the auto page numbers, I am going to the Type-Insert Special Character-Markers-Current Page Number, and placing that within a text field at the bottom of the page. Thanks in advance. )

Here is a screen shot. I have placed it on the A-Master. See Screenshot#1. Screenshot #2 shows Page 70 with no page number (and no other pages have page numbers that I can see. Thanks for your advice on fixing....
Sorry, here is screenshot #2, (with personal details redacted but the records are there behind the grey boxes):

Can I use Non-standard XSD Data Types in my XSD; if so how?

Please help if you can, this is a complex question, so bear with me.
Also note that I am in Livecycle 8.2 ES (not ES2 or higher).
I am working on creating XSD schemas to map to form objects.
I have created one master schema document that is wired into multiple forms, and I have one separate schema for reusable form objects, that I refer to as a "common node".
All of my individual form schemas are brought together in this one Master Schema via the use of include statements.
EXAMPLE: This is like my Master Schema
<?xml version="1.0" encoding="UTF-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified" >
<xs:include schemaLocation="./commonElementsNode.xsd" />
<xs:include schemaLocation="./form1111.xsd" />
<xs:include schemaLocation="./form2222.xsd" />
<xs:include schemaLocation="./form3333.xsd" />
<xs:element name="form">
<xs:complexType>
<xs:sequence>
   <xs:element ref="commonElementsNode" />
   <xs:element ref="form1111" />
   <xs:element ref="form2222" />
   <xs:element ref="form3333" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
This works fine.
I can load this up in Designer in the Data View and everything appears in the Data View hierarchy correctly, with "form" as the top node.
And as long as I use standard "xs:" data types - everything works great. So if I go into LiveCycle Designer and I go to File --> Form Properties --> Preview --> Generate Preview Data and generate dummy XML data - it respects my XSD conventions.
Now here is where the problem arises:
In these schemas, I need to define the data types.
The client I am working for needs me to use their data types.
These data types are not standard xs: data types, like "xs:string" or "xs:date".
Rather, the data types are ones that have been defined in other schemas and reserved to a namespace.
For instance, rather than use xs:date I need to use something like: "myns:DateType"
This "myns:DateType" is defined as:
<xs:complexType name="DateType">
<xs:simpleContent>
   <xs:extension base="xs:date">
    <xs:attribute name="format" type="xs:string" use="optional">
     <xs:annotation>
      <xs:documentation xml:lang="en">
       <mydoc:Name>Date Format Text</mydoc:Name>
       <mydoc:Definition>The format of the date content</mydoc:Definition>
       <mydoc:PrimitiveType>string</mydoc:PrimitiveType>
      </xs:documentation>
     </xs:annotation>
    </xs:attribute>
   </xs:extension>
</xs:simpleContent>
</xs:complexType>
Note that I have redacted this data type slightly and changed the namespace to protect the anonymity of my client, but we can assume that their data type is valid and currently in use with other systems.
It conforms to W3 standards.
Note also how this type is an enumeration of the base type "xs:date".
This is defined in a schema called something like "MyCoreTypes.xsd"
There is a namespace reservation in this file that looks something like this:
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified"
xmlns:myns="http://clinetname.com/schemas/mycoretypes" >
So there is a name space reservation there.
In my aforementioned "Master Schema" file, I have an include statement that looks like this:
<xs:include namespace="http://clinetname.com/schemas/mycoretypes" schemaLocation="./MyCoreTypes.xsd" />
(let's assume that the schema is in the same folder, as the Master Schema, so we can use the "./" relative path.)
Now the problems is that in all my forms, where I have a myns:DateType (e.g.: in form1111, a "Date of Birth" element that looks like this: <xs:element name="OwnerBirthDt" type="myns:DateType"/> ) the XSD is not respected when the XML dummy data is generated in LiveCycle Designer implying that the XSD's data types are not being recognized properly.
Has anyone had this problem before?
Is there a solution?
Is it even possible to use these kind of include or import references in LiveCycle to define a data type other that the standard "xs:" data types?
Please let me know - it would be greatly appreciated.
I am more than willing to clarify the question further if others are willing to help.
Thanks -
Ben Lyons

prf.kishorekumar wrote:
i came here with a hope that I would definitely get some help.
pls.. some one reply1) You got some help. No where do I see thanks or acknowledgment for the information given.
2) Please remember that people on the forum help others voluntarily, it's not their job.
3) Google can often help you here if the forum can't. Using Google I found this interesting link:
http://today.java.net/pub/a/today/2004/05/24/html-pt1.html
It discusses the Swing HTML EditorKit as well as some other free HTML renderers.
Edited by: petes1234 on Oct 24, 2007 7:29 PM

How can I display the password expiration date for a user

I have created a GUI (using PrimalForms) which runs powershel scripts to pull information like user ID, email address, last logon ec. for the helpdesk to help establish the validity of some user claims of "it worked yesterday" and the like.
I have been asked to add the password expiration date, but I am struggling to get the code for this addition.
Does anyone know how I can include this, and have it in a human readable format?
The current scripts (there are 3) allow the helpdesk staff to search on user ID and display name, the third provides the last logon, it was impossible to include this in the other scripts so I added an extra search button and called it good. An example of
these scripts is below (please note, PrimalForms needs a slightly different syntax in order to get the results displayed, but the core script is standard PS, I use Powershell 3.0)
$results.Text=Get-ADUser -Filter "sAMAccountName -eq '$($EntryBox.text)'" -Properties DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | select givenName, surname, DisplayName, sAMAccountName, mail, extensionattribute5, PasswordLastSet, PasswordExpired, PasswordNeverExpires, buMemberOf, telephoneNumber, msExchOmaAdminWirelessEnable, whenCreated, whenChanged, enabled, AccountExpirationDate | Out-String
$results.Focus()
for info:
$results.text is the window in the GUI results are displayed in
$entrybox.text is the text box the helpdesk staff use to input the user ID or display name of the account they are querying
$results.focus simply tells the script to put the results in the results.text window
The screenshot below shows the current setup, this is purely to put the above information into perspective. Obviously some of the information displayed has been removed/redacted along with our logo.

Hi,
Here's an example you can build from:
$maxPasswordAge = 120
Get-ADUser USER -Properties PasswordLastSet |
Select SamAccountName,
PasswordLastSet,
@{N='PasswordLifeRemaining';E={$maxPasswordAge - ((Get-Date) - $_.PasswordLastSet).Days}},
@{N='PasswordExpirationDate';E={(Get-Date $_.PasswordLastSet).AddDays($maxPasswordAge)}}
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

Hi all,
I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
I've had to force restart over a dozen times today :/
I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
If anybody could share some light into the report below I would be very grateful:
Problem description:
Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 4:55 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
    MacBook Pro - model: MacBookPro7,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
Video Information: ℹ️
    NVIDIA GeForce 320M - VRAM: 256 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:7:25
Disk Information: ℹ️
    ST1000LM024 HN-M101MBB disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS23N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    Caffeine    Application (/Applications/Caffeine.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        20%    WindowServer
         6%    com.apple.WebKit.WebContent(7)
         4%    Safari
         3%    hidd
         1%    launchd
Top Processes by Memory: ℹ️
    1.07 GB    com.apple.WebKit.WebContent(7)
    439 MB    kernel_task
    90 MB    spindump
    57 MB    mdworker(5)
    57 MB    Safari
Virtual Memory Information: ℹ️
    4.54 GB    Free RAM
    3.46 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 04:47:31 PM    Self test - passed
    May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
    May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
Regards
Hoz

Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
This has happened about a dozen times.
I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
I have a 250 gb partition for the OS and the rest is my second partition for data.
I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
Any thoughts would be awesome. Thank you for reading and replying!
Hoz

REDACT expert in Acrobat 9 Pro. Expert witness please

I am the plantiff in a court case where the defendent is an attorney. I am not represented. (do not comment on this please). I am disputing a bill from the attorney who uses Acorbat 9 to scan documents. The Court ordered the attorney, who is representing my wife, to redact documents and the attorney used a paralegal to do it by hand. She is billing me for $1,000, I believe out of spite. Twice the attorney refused to redact documents over a period of months. Finally the Court ordered her to do it.. I protested the bill as being unreasonbale and the Court has asked for a live hearing, to hear my case. I need an expert witness whom I will pay to demonstrate the redact capability to show that the law firm could have performed the redact in seconds, not 8 hours. Now it is a matter of principle, not the money. If you dislike attorneys as I do, you may be happy to squash this one. I live in Colorado Springs, CO. the court date has not been set yet. It will probably be in October 2009 Thanks. Mike

Thanks for the reply,
I have a little more infomation that I did not include to keep the query short. This is in response to graffiti.
1.   The attorney's firm has admitted to using Acrobat pro. The firm has also admitted that they have not pursued training in using acrobat. In normal business practices training is a cost of doing business, and it is an ethical obligation to their clients. The same as the education they receive to get their degree or to attend seminars, etc. Furthermore, Acrobat functions such as redact and bates numbering system were developed by Adobe specifically for the legal profession. If any firm is not using Acrobat or similar software, they should be because it is cost effective for the client. Using technology is ethical behaviour. Or they should be charging the same rate that they did when technology wasn't available. The statement that thay may not be using Acrobat is not relevant, the statement is predudical towards the attorney and excuses them for not being ethical.
2. This may sound biased, and it is, but here goes, attorneys, who are only interested in how much they bill, have no incentive to reducing their billable hours. They wish to keep the clock running as long as they can. That is why this case is so very important. Why should a cash paying client be charged for their unethical behavior? Law firms are the only profession which is unaccountable for their hours. It is very hard to prove they are practicing unethical behavior for their clients. Let's face it, 1 hour of paralegal costs $150, but the Para legal only gets $40 or so of that amount. It makes sense for the firm to bill for hours despite there being a more cost effective way to perform the task.
3. The number of documents may be important, how much is a ton? I suggest the number of documents is not relevant because a computer can process in microseconds using the find and replace function. For example, how long does it take you to do a find and replace on your word processor?
4. The firm is supplying other entities both pdf and hard copies but they first scan everything into their own system using Acrobat, then they print it out in hard copy format to distribute. Instead, they could scan in, redact, and then print. What is wrong with that procedure?
5. Or.... if they supply pdf files to other entities, they could scan in, redact and provide the pdf file.
6.   As in any Court case, An expert can do a lot by showing the Court the truth. In this case, how easy it is make a few keystrokes, and the job is done.
7. Everyone should realize that the judge knows nothing except facts presented to him. Judges are not experts on information, they only make decisions based on testimony and the law, they will not "realize" anything without testimony from an expert. The fact is that Judges hear testimony, they use common sense, and they decide, but they are not experts, especially in technology.. FYI, My testimony alone is not, in the eyes of the Court, fact based because I am perceived as being prejudiced. That is why I need an expert. Let's use other examples. What about the ford pickup truck that starts on fire all by itself, the Corvair that is unsafe, the collapse of Enron, the ponzi schemes, the McDonald coffee spill, etc?, in these cases, the plaintiff testimony alone would not have been enough.   This statement is not a put down to anyone, and it is not idealistic, and I am not fantasizing or a TV addict, but sometimes it is important to use examples, stupid as they may sound, in the simplest of forms, for example: Law and Order, Boston legal and other TV series are not novels made for TV, they are based on fact, and the fact is that the expert witness plays a significant role and can be the deciding factor.
Sorry, please don't take this personally, but I remind everyone... this cup is half full.
Thanks for your thoughtful responses.
Mike
--end--

Redaction leaves some characters intact

I had this problem with just one pdf document in Acrobat Pro 9 and now in 9.1. I try to redact some paragraphs of text in a mathematical document. Some randomly scattered characters persist and cannot be redacted. However, if I select all of the page's content (including the paragraph I wanted to keep) the text can be redacted. I use redaction on a daily basis and this seems to be a rare issue - only got it in one of a few hundred pdf documents.
I can send the pdf file, however, I cannot post it on the forum, as the information there should not be made public.
@Adobe: Please contact me at my private e-mail contact address if you would like me to send the pdf file that reproduces the bug.
I enclose the "System Info".
Maciej.
Available Physical Memory: 1461432 KB
Available Virtual Memory: 1958092 KB
BIOS Version: HP - 15090520
Default Browser:
Default Mail: Mozilla Thunderbird
C:\Program Files\Mozilla Thunderbird\mozMapi32.dll
Version: 0.8
Creation Date: 2008/07/31
Creation Time: 14:12:46
Graphics Card: ATI MOBILITY RADEON X600
Version: 6.14.10.6512
Check: Not Supported
Installed Acrobat: D:\Acrobat\Acrobat\Acrobat.exe
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:00
Installed Acrobat: C:\Program Files\Adobe\Reader 8.0\Reader\AcroRd32.exe
Version: 8.1.0.2007051100
Creation Date: 2007/05/11
Creation Time: 03:06:38
Locale: Polski
Monitor:
Name: ATI MOBILITY RADEON X600
Resolution: 1280 x 800 x 60
Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Dodatek Service Pack 3
Page File Space: 2725568 KB
Processor: x86 Family 6 Model 13 Stepping 8 GenuineIntel ~1729 Mhz
System Name: ACTARITH-NB
Temporary Directory: C:\DOCUME~1\actarith\USTAWI~1\Temp\
Time Zone: Ĺrodkowoeuropejski czas stand.
Total Physical Memory: 2096496 KB
Total Virtual Memory: 2097024 KB
User Name: actarith
Windows Directory: C:\WINDOWS
Installed plug-ins:
D:\Acrobat\Acrobat\plug_ins\AcroForm.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:27
D:\Acrobat\Acrobat\plug_ins\Annots.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:36
D:\Acrobat\Acrobat\plug_ins\DigSig.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:26
D:\Acrobat\Acrobat\plug_ins\EScript.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:35
D:\Acrobat\Acrobat\plug_ins\PPKLite.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:32
D:\Acrobat\Acrobat\plug_ins\Updater.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:30
D:\Acrobat\Acrobat\plug_ins\weblink.api
Version: 9.1.0.2009022700
Creation Date: 2009/03/17
Creation Time: 10:14:30

Maciej, this is not Adobe Technical Support, it's a User-to-User forum.
Maybe someone can help you, but don't think that anyone here represents Adobe (unless otherwise stated).
If you want tech support you will need to call them or make a web case. They will probably charge you for it, though.

Can't apply redaction! Problem reading this document (16) Acrobat 9 pro

I am trying to apply redactions to sensitve data. I go through all the steps, mark it for reaction etc.. but when I click to "apply redaction", I get the error message "There was a problem reading this document (16). I can't find an answer to this anywhere!
The file I'm using originated from a CD sent to me from our retirement administrators. There are no restrictions on what I can do with the files.
I've tried this on 3 different computers, using both Acrobat 9 Pro (with most current updates) and Acrobat 10 Pro and I always get the same error message. Even when I extract one page, rename it and try to manually redact (without using search and redact), I still get the same message.
Any ideas??? I really need to redact social security numbers!
Thanks
I'm using windows 7 pro if that helps...

Can't believe I didn't think of that! It worked!
Thanks!

Data Redaction in 11.2.0.4 DB

Similar Messages

Maybe you are looking for