Data service not operationa​l

i cannot access my bb app world for a vry long time  a message  appeear says " the data service is not operational. sam when  log in to ym, msn, gtalk..and other IM. please help. thank you. 

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support and to be sure you are subscribed to a data plan that enables the services you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Master Data Services not available under shared feature while installing SQL server 2012

    Hi,
    I am trying to install Master Data Services but do not see the option to select MDS under the shared features when going through the SQL server 2012 installation. I have the SQL server 2012 SP1 (64 bit) install files. I have also installed SP2. I havent
    found anything online about the issue.
    Can someone please advise?
    I have a screenshot of the installation screen which I will attach as soon as I am able to get my account verified. Thanks!

    Hi Revees,
    This might be a very naïve and also out of the original scope of the thread question.
    We are thinking of going with the developer edition. We have 2/3 developers and some other testers and business users.
    1) I understand that we need a developer license for each developer. But would we need a license for the business user. Can they have a sort of read access to the dbs?
    2) If a developer has MSDN subscription, Would they need to purchase the license too assuming we purchase the developer edition of the software (and not download it using the MSDN subscription)?
    Thanks for your assistance!

  • Assign Task - Prepare Data Service not being called?

    Hi,
    I've got an Assign Task activity, with an Action Profile that defines a Prepare Data Service.  For the Prepare data service, I've just created a simple process, and I'm recording it.
    When the assign task gets invoked, the Prepare Data Service process is not being executed.  Nothing gets recorded.
    Do I need to do something else?
    I am running LC ES2 SP2
    Note - If I use a Prepare Data Process on a Task Manager start point, it works fine.  It's just not working for an Assign Task activity.
    Thanks

    Hi
    By default, the checkbox to run the Prepare Data on the User service step is turned off.
    Navigate to the Presentation & Data tab on the User service.
    If you have selected an Action Profile that specifies a Prepare Data process, you'll see 3 checkboxes under the section: Specify when the Prepare Data process runs
    Check "The user opens the task" and it will now run the Prepare Data on the User service.
    Note: This is unchecked by default so that any data entered on the startpoint step is not overwritten at the user step.
    It is up to the process designer to save off any data that you do not want overridden when the Prepare Data loads.
    Diana

  • Data Service Not showing all the out param values in Oracle Store proc call

    Hi,
    I have imported a Oracle stored proc which takes 3 input params and gives 33 out params.
    While testing the Data Service , it is showing only the First 3 out params.
    I tried the same request thrught JDBC code and it is showing results for some of the other params.
    Is this any DSP issue ?
    Thanks
    Gkumar

    Open a case with Customer Support and ask for the patch on CR295750.

  • Data Services Not Working in Flash 9.0.115

    Hi all,
    I have an existing flex 2 application using dataservices
    extensively. I upgraded flash on my computer to flash 9.0.115 and
    dataservices no longer work. I read about the new security feature
    for the crossdomain.xml, so I checked the log files and I have no
    errors for it. The crossdomain.xml is as follows:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "
    http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="all"/>
    <allow-access-from domain="*" />
    </cross-domain-policy>
    Anyone have any suggestions or know why the fds simply
    doesn't work?

    If your Flash 9 movie is using AS3, you have to use
    navigateToURL() instead of getURL().

  • Data Services job rolling back Inserts but not Deletes or Updates

    I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
    I am not using the Transaction Control feature (because it just throws an error when I use it)
    My issue is as follows.
    Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
    But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
    And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or  what I'm doing wrong/what my misconception may be?
    Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
    If you require more information, please let me know.

    Hi Michael,
    Thanks for your reply. Here are all the options on my source table:
    My Rows per commit on the table is 10,000.
    Delete data table before loading is not checked.
    Column comparison - Compare by name
    Number of loaders - 1
    Use overflow file - No
    Use input keys - Yes
    Update key columns - No
    Auto correct load - No
    Include in transaction - No
    The rest were set to Not Applicable.
    How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
    I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
    I can also try using the Auto correct load feature.  I'm guessing "upsert" was a typo for insert? Where is that option?
    Thank you very much!
    Riley

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Data Services wizard not creating service

    I am having huge problems with the Data Services wizard.
    I am using Flash Builder 4.6 on a Mac (10.7.2).
    Over the last year I have been working on a couple of proof of concept projects and now want to start work on a production version starting from scratch in a new project.
    The Data Services wizard has worked fine for me in the past, but now I am having serious problems.
    The first problem is the Data/Services window does not update when I create a new service with the wizard. (I am connecting to the Zenfolio Web Service.) If have to close the project and open it before I see the new service in the Data/Services window.
    While this problem is more an inconvenience, more seriously the wizard does not create either the "services" folder or the "valueObjects" folder as it did in the past.
    Now if I right click on a method in the service and select "Create Service Call", it creates the Call Responder but not the call itself.
    The relevant log entry starts with
    !ENTRY com.adobe.flexbuilder.dcrad 4 1 2012-01-12 22:39:20.962
    !MESSAGE Component type services.zfapi.Zfapi not found.
    If I create a "services" folder and copy the zfapi package from one of my previous projects, all works fine.
    This probably gives me a workaround - although I haven't tested this to any extent yet.
    It is very strange and worrying behaviour though.
    regards
    Chris

    OK, here are the log entries created when I try to create the service:
    !ENTRY com.adobe.flexbuilder.dcrad 4 1 2012-01-19 22:16:33.970
    !MESSAGE
    !STACK 0
    java.lang.reflect.InvocationTargetException
              at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:479)
              at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
              at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:507)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.addServices(ServicesManager.jav a:476)
              at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:536)
              at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
              at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
              at org.eclipse.swt.widgets.Widget.sendSelectionEvent(Widget.java:1530)
              at org.eclipse.swt.widgets.Link.textView_clickOnLink_atIndex(Link.java:117)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5781)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
              at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092)
              at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084)
              at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2519)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
              at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2092)
              at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2252)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989)
              at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method)
              at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128)
              at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610)
              at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
              at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
              at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
              at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
              at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
              at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
              at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
              at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
              at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              at java.lang.reflect.Method.invoke(Method.java:597)
              at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
              at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
              at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
    Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Priority
              at freemarker.log.Log4JLoggerFactory.getLogger(Log4JLoggerFactory.java:65)
              at freemarker.log.Logger.getLogger(Logger.java:255)
              at freemarker.template.utility.SecurityUtilities.<clinit>(SecurityUtilities.java:67)
              at freemarker.ext.beans.BeansWrapper.<clinit>(BeansWrapper.java:147)
              at freemarker.template.ObjectWrapper.<clinit>(ObjectWrapper.java:69)
              at freemarker.core.Configurable.<init>(Configurable.java:132)
              at freemarker.template.Configuration.<init>(Configuration.java:109)
              at freemarker.template.Configuration.<clinit>(Configuration.java:96)
              at fiber.gen.freemarker.FreemarkerModelGenerator.buildFreemarkerConfiguration(FreemarkerMode lGenerator.java:328)
              at fiber.gen.freemarker.FreemarkerModelGenerator.<init>(FreemarkerModelGenerator.java:85)
              at fiber.gen.freemarker.FreemarkerStructuredTypeGenerator.<init>(FreemarkerStructuredTypeGen erator.java:62)
              at fiber.gen.as.ASClassGenerator.<init>(ASClassGenerator.java:84)
              at fiber.gen.as.vo.SuperGenerator.<init>(SuperGenerator.java:53)
              at fiber.gen.as.vo.ASValueObjectGenerator$2.<init>(ASValueObjectGenerator.java:225)
              at fiber.gen.as.vo.ASValueObjectGenerator.getBaseClassGenerator(ASValueObjectGenerator.java: 222)
              at fiber.gen.as.vo.ASValueObjectGenerator.getTemplateNames(ASValueObjectGenerator.java:392)
              at fiber.gen.as.ASGenerator.getTemplateNames(ASGenerator.java:465)
              at com.adobe.model.core.generators.wrapper.CodeGenerationUtils.getTemplateResources(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.getTemplateResourcesForGene rator(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateCodeForGenerator(Un known Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.internalGenerateAllCodeForM odel(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper$2.run(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateAllCodeForModel(Unk nown Source)
              at com.adobe.flexbuilder.dcrad.core.generation.ASVOGenerator.generate(ASVOGenerator.java:78)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.generateVO(ServicesManager.java :538)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.add(ServicesManager.java:403)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.access$11(ServicesManager.java: 356)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager$1.run(ServicesManager.java:484)
              at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
              ... 48 more
    Caused by: java.lang.ClassNotFoundException: org.apache.log4j.Priority
              at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:513)
              at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:429)
              at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:417)
              at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:107)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
              ... 77 more
    Root exception:
    java.lang.NoClassDefFoundError: org/apache/log4j/Priority
              at freemarker.log.Log4JLoggerFactory.getLogger(Log4JLoggerFactory.java:65)
              at freemarker.log.Logger.getLogger(Logger.java:255)
              at freemarker.template.utility.SecurityUtilities.<clinit>(SecurityUtilities.java:67)
              at freemarker.ext.beans.BeansWrapper.<clinit>(BeansWrapper.java:147)
              at freemarker.template.ObjectWrapper.<clinit>(ObjectWrapper.java:69)
              at freemarker.core.Configurable.<init>(Configurable.java:132)
              at freemarker.template.Configuration.<init>(Configuration.java:109)
              at freemarker.template.Configuration.<clinit>(Configuration.java:96)
              at fiber.gen.freemarker.FreemarkerModelGenerator.buildFreemarkerConfiguration(FreemarkerMode lGenerator.java:328)
              at fiber.gen.freemarker.FreemarkerModelGenerator.<init>(FreemarkerModelGenerator.java:85)
              at fiber.gen.freemarker.FreemarkerStructuredTypeGenerator.<init>(FreemarkerStructuredTypeGen erator.java:62)
              at fiber.gen.as.ASClassGenerator.<init>(ASClassGenerator.java:84)
              at fiber.gen.as.vo.SuperGenerator.<init>(SuperGenerator.java:53)
              at fiber.gen.as.vo.ASValueObjectGenerator$2.<init>(ASValueObjectGenerator.java:225)
              at fiber.gen.as.vo.ASValueObjectGenerator.getBaseClassGenerator(ASValueObjectGenerator.java: 222)
              at fiber.gen.as.vo.ASValueObjectGenerator.getTemplateNames(ASValueObjectGenerator.java:392)
              at fiber.gen.as.ASGenerator.getTemplateNames(ASGenerator.java:465)
              at com.adobe.model.core.generators.wrapper.CodeGenerationUtils.getTemplateResources(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.getTemplateResourcesForGene rator(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateCodeForGenerator(Un known Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.internalGenerateAllCodeForM odel(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper$2.run(Unknown Source)
              at com.adobe.model.core.generators.wrapper.CodeGenerationWrapper.generateAllCodeForModel(Unk nown Source)
              at com.adobe.flexbuilder.dcrad.core.generation.ASVOGenerator.generate(ASVOGenerator.java:78)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.generateVO(ServicesManager.java :538)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.add(ServicesManager.java:403)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.access$11(ServicesManager.java: 356)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager$1.run(ServicesManager.java:484)
              at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:464)
              at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:372)
              at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:507)
              at com.adobe.flexbuilder.dcrad.core.internal.ServicesManager.addServices(ServicesManager.jav a:476)
              at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:536)
              at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
              at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
              at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
              at org.eclipse.swt.widgets.Widget.sendSelectionEvent(Widget.java:1530)
              at org.eclipse.swt.widgets.Link.textView_clickOnLink_atIndex(Link.java:117)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5781)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
              at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092)
              at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084)
              at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2519)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220)
              at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2092)
              at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2252)
              at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method)
              at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989)
              at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138)
              at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method)
              at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128)
              at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610)
              at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)
              at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)
              at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2494)
              at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:674)
              at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
              at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)
              at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
              at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
              at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
              at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
              at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              at java.lang.reflect.Method.invoke(Method.java:597)
              at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
              at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
              at org.eclipse.equinox.launcher.Main.run(Main.java:1410)
    Caused by: java.lang.ClassNotFoundException: org.apache.log4j.Priority
              at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:513)
              at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:429)
              at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:417)
              at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:107)
              at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
              ... 77 more

  • Data Services- The job server you selected is not working

    Long Text:
    After logging in to the Data Services designer,when try to run a job it shows error -The job server you selected is not working
    Latest Software version -BODS 4.0 SP2
    Reproduce Steps:
    1. Double click on the Project from repository, it will display the project in Project area.
    2. After that it will display all the jobs under the project.
    3.Right click on the job and try to execute, then it will display the "Execution Properties" windows.
    Here the we can the default Job Server has been selected.
    4. Try to click ok to execute the job and then we get the error-"The job server you selected is not working"

    Hi
    Please contact your Data services administrator to check on the server why the job server is not working.
    There might be several issues like connectivity with the repository, access details , mapping in the management console etc.
    And let us know the exact issue.
    Regards
    Puneet

  • Data Services 4.0 error when running job - not updating repository table

    Hi All,
    I am hoping someone might have come across this error before.
    When running a data services job, from within Data Services Designer, when trying to re-run the same job, I get the following error messages:
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     SQL submitted to Oracle Server <BO3> resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     >. The SQL submitted is <INSERT INTO AL_BW_REQUEST (REQUESTID,TYPE,VALUE,DF_NAME,CREATION_TIME) VALUES (
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     'REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU', 3 , '29', 'DF_XXXX_Data_DW1Date',  to_date('2011.10.17 10:38:39', 'yyyy.mm.dd
    9332     2572     DBS-070300     17/10/2011 10:38:39 AM     hh24:mi:ss') )>.
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     |Data flow DF_XXXX_Data_DW1Date
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     Cannot save <RequestID info> into the repository. Additional database information: <SQL submitted to Oracle Server <BO3>
    9332     2572     REP-100109     17/10/2011 10:38:39 AM     resulted in error <ORA-00001: unique constraint (DS3_ADMIN.SYS_C005632) violated
    When I go and look into the Data Services repository AL_BW_REQUEST  table, the first time the job is run, all five fields in this table populate with data successfully. When re-running the job, on 3 out of the five fields within this table are populated but the VALUE and DF_NAME field are not populated, hence causing the primary key violation.
    Here is the data below from the AL_BW_REQUEST  table:
    REQUESTID                                      TYPE  VALUE     DF_NAME                               CREATION_TIME
    REQU_4NIVIZ1G9S5B7LUY0HHP65ZJU     3                      10/17/2011 10:38:38 AM
    REQU_4NJ503RVIFD3VLBJJEKBJ3OE2     3                       10/17/2011 10:33:37 AM
    REQU_4NJ4ZHSP9F93L3OAUDV6RHCMY     3                       10/17/2011 10:32:31 AM
    REQU_4NIV1NKP9645E394E7H12Q796     3                      10/17/2011 9:53:53 AM
    REQU_4NEYFNI2U68MBJOEWFJWVWWU2     3  24     DF_XXXX_Data_DW1Date      10/17/2011 9:47:58 AM
    If I truncate this table and re-run the DS job, it will not populate the VALUE and DF_NAME fields. 
    Does anyone know what could be causing this? The target source is BW.
    Seems like a bug to me.
    Thanks,
    Ainsley

    Hi Ramesh,
    Am a HANA apps consultant in India, would like to get in touch with you. but don't know how
    regards,
    Tilak

  • I did an update to my wife's iPhone and now it won't connect through the 3G. It says you are not connected to a cellular data service

    I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
    IT shows Bell as the provider but we seem to have lost something during this update.
    can someone help me please.

    Check Settings>General>Cellular and make sure Cellular Data is set to On.  If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again.  If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.

  • Data Services XI3.1 function module files for SAP R/3 is not working

    Hi guys,
    Thank you for the quick response so far. I am very grateful to you all. 
    I got an issue and will try to explain as detail as I could and 
    hope ur guys won't mind. :P
    I pass the functions module to SAP tech guy to install to SAP using CTS 
    method, and using 900086.R63 file type because my chinese client is 
    running SAP on unicode environment.
    My DS installed on my laptop client; job server plus db2 is on HP 
    unix. SAP is on another HP Unix server. The function module I used is 
    supplied from Data Services XI3.1.
    Anyway, the installation is successfully done with GUI wizard windows of 
    SAP Workbench instead of tp command line method.
    1)However, I checked the ZAW0 function group, I opened and can't see any functions
    listed under it, although the table structures ZACTA, ZTAB2048 and other items
    were created.
    2)So I tried to create SAP Datastore, Transport Target, etc and tried to 
    extract file. It failed and log said "can't open file --- 
    /db2/temp/curcode.txt". I checked and SAP working directory /db2/temp didn't have 
    curcode.txt, because the result file supposed to be extracted and stored there. 
    The SAP tech guy checked SAP and cant find generated ABAP program of 
    ZCURCD is running anyway, although my local CURCD ABAP program is 
    created.
    3)Is it the 900086.R63 not complete? Is my function installation correct? I could view data
    on datastore, but just cant run job to extract. Another non-unidcode 900200.S08 group
    has larger file sizes. Should I try to install also this 900200.S08 files? Will it corrupt SAP
    and cause system errors?
    4)After that, I had tried to install the functions manually into ZAW0 
    one by one using cut and paste, however after that, I cant view the data view anymore with 
    error. Besides, I tried to run Check on the functions and they all returned 
    syntax errors, so I cant Activate any of them with SAP. Maybe dependency is missing??
    Then, I deleted the manually installed functions and can view data again, but just cant extract 
    data by job.
    5)Another side issue is all these SAP datastore creation and viewing is  
    through DI 11.5 old installation. The new Data Services X3.1 unable to 
    create datastore with database error, although the function module 
    installed is came from Data Services. Does anyone know the issue?
    Thank you very much to read it patiently. :P

    Hi,
    Thank you for the informative link. It did help a lot in solving the problem.
    (1) to (4) --- The Sap tech guy didnt install the function programs correctly, and he redo the transport again using CTS. Now I can see all the functions inside the function group ZAW0. While for the problem of cannot generate extracted file to SAP working directory for downloading, it is due to unix directory access permission setting. And also have to include the ftp username into SAPSYS user group as the help link suggested.
    (5) For this problem, I reinstalled again the DS with all required components like Server Manager. The network technical guy helped me with the first installation, and the installation was not complete. So now the issue is solved, I can create R/3 Datastore with DS.

  • HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

    Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

  • Data Services ORA-00942 table does not exist. Source/Target same DB

    Error: u201CORA-00942: table or view does not existu201D
    Source & Target Datastores in same Oracle DB but different User/Schemas.
    I set up the Data Services Tutorial Source & Target Data bases in ONE Oracle DB using a separate User/Schema for the ODS source DB & TARGET Source DB.
    I then created
    - Source datastore for the ODS DB User/schema
    - Target datastore for the TARGET DB user/Schema.
    I have no problem reading flat files & writing to TARGET datastore tables.
    However, when I read the ODS datasttore source table CUSTOMER & write to the TARGET datastore target table CUST_DIM I get an error: ORA-00942: table or view does not exist.
    I can query the table contents from the Data Flow & see the data in the source data & see the empty target table.
    So the tables exists & there is no security issues from the DS Designer.
    I did find note 1189910 - ERROR: Error Description: An error occurred while creating the result data - Data Insight XI
    Cause
    Multiple engines are being run against the same metadata repository.
    Resolution
    Verify that only one engine is being run against a single metadata repository.
    Has anyone seen this error?
    Or has anyone created a 2 data stores on the SAME DB, but to different User/Schemas?
    Thanks
    Jay Roble

    since you are accessing 2 schema which are on same oracle database, DS engine is trying to optimize and generating an INSERT INTO ... SELECT clause. Since its the same DB, DS Engine is doing a implicit linking of the datastores
    you can see the SQL generated from the Designer, drill down into DF, from the Menu select Validation ->Display Optimised SQL
    to disable this implicit linking, right click on the Dataflow, select properties
    in the properties window, unselect the the option "use database links"

  • Flex Data Services does not see remote methods in extended ColdFusion component.

    I have created a remote service base component as a AModelService.cfc file. I extend that file to make my ModelService.cfc. When I configure the ColdFusion data service and point to ModelService.cfc and click next, I don't see any remote methods (there are none explicitly defined in the component) in the Service Operations window.
    If I go back and point to AModelServide.cfc, the parent component, and hit next, I see all the remote methods that are defined in the parent component. So, either I am doing something wrong, or Data Services does not look at methods up the cfc prototype chain, which from an OOP standpoint means that instead of say creating one restful base class and being nice and DRY you can't. I.e. not OOP for data services. Is this a bug, or what?
    Anybody get data services to work with extended service components?
    Mark

    Thanks for the reply. Yes, I did compile all the Java and it
    works OK with a simple Java program. It just will not work in a
    Flex application.
    The java classes are:
    RRA:
    package blah.myPackage;
    import java.util.List;
    import java.util.Collection;
    import flex.data.DataSyncException;
    import flex.data.assemblers.AbstractAssembler;
    class RRA extends AbstractAssembler
    public Collection fill( List fillParameters )
    RRS service = new RRS();
    return service.getSome();
    RRS:
    package blah.myPackage;
    import java.util.ArrayList;
    import java.util.List;
    import java.sql.*;
    import flex.EORS.*;
    class RRS
    public List getSome()
    ArrayList list = new ArrayList();
    String str = "bob";
    RR rr = new RR(str);
    list.add(rr);
    return list;
    RR:
    package blah.myPackage;
    class RR
    private String name;
    public RR() { }
    public RR(String name)
    this.name = name;
    public String getName()
    return this.name;
    public void setName(String name)
    this.name = name;
    I started with something that retrieved data from a database
    but watered it down just to try and get some kind of communication
    between Flex and Java.

Maybe you are looking for