Data Services 4.0 Job Server ODBC DB2 library error

I have followed the instructions in the SBO 401 DS Admin Guide for configuring ODBC data sources on UNIX. I have gotten the unixODBC part working from the LINUX DS Job server host using isql DNS UID PWD. I am able to connect to the DB2 9.7 UDB server and I run queries successfully. My problem is when I go to submit a column profile request I get the following error back in the profiler monitor:
ErrorSystem call <LoadLibrary> to load and initialize functions failed for <libdb2.so>. Ensure the shared library is installed and located correctly.
This library is contained in the /opt/sapds/DB2_Conn/odbc_cli/clidriver/lib directory which is contained in the LD_LIBRARY_PATH. I have these 2 entries in the ds_odbc.ini file:
[DB2TEST]
Driver = /opt/sapds/DB2_Conn/odbc_cli/clidriver/lib/libdb2.so
[DB2]
Description = IBM DB2 Adapter
Driver = /opt/sapds/DB2_Conn/odbc_cli/clidriver/lib/libdb2.so
There is a troubleshooting section in the admin guide that states "To determine whether all dependent libraries are set properly in the environment variables, you can use the ldd command on the ODBC driver manager library and the ODBC driver library."
For example: ldd tdata.so
Is this a real thing to check or just an example?
When I check the db2 library I receive the following:
$ ldd libdb2.so
        linux-vdso.so.1 => (0x00007fffd13fc000)
        libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00002b5ab3d36000)
        libdl.so.2 => /lib64/libdl.so.2 (0x00002b5ab3f6e000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b5ab4172000)
        librt.so.1 => /lib64/librt.so.1 (0x00002b5ab438e000)
        libpam.so.0 => /lib64/libpam.so.0 (0x00002b5ab4597000)
        libm.so.6 => /lib64/libm.so.6 (0x00002b5ab47a2000)
        libstdc+.so.6 => /usr/lib64/libstdc+.so.6 (0x00002b5ab4a26000)
        libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002b5ab4d26000)
        libc.so.6 => /lib64/libc.so.6 (0x00002b5ab4f34000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003791400000)
        libaudit.so.0 => /lib64/libaudit.so.0 (0x00002b5ab528d000)
I believe that the DB2 ODBC DNS is working correctly because I can connect and run queries from the server host.
Does anyone have an idea on what I might check to get this working? Should I open up a support message for further help? Let me know, thanks.
Additionally, we have our Oracle profiler job working without issue.
But, we are having another issue in the Data Services Designer when leaving the options screen we get the following error:
"The Job Server in not responding. Cannot save modifications to the job execution options. Make sure the Job Server is running and accessible from the Designer, and then make make your changes again. (BODI - 1260016)." I do not think that this is related to running the DB2 profiler jobs because, as I said we can run Oracle jobs without issue.
Edited by: John Joiner on Oct 18, 2011 1:31 AM

Hey John
We are having a similar issue. Can you please let me know how the issue was fixed (i.e. what were the missing pieces in the setup)?
Thanks!

Similar Messages

Data Services - Open hub read - No Open Hub DTP error

Hi,
I have created a open hub destination in BW (7.0 SP21), created transformation, DTP and process chain. In Data Services (3.2) I have created flow, job etc. and every thing seems to be as expected. However when I start the job in DS it terminates with an error:
1136 5624 BIW-230334 13-11-2009 12:28:22 Process Chain <ZTEST2> of Open Hub destination <ZTEST> at SAP system <.......> no more contains Open Hub DTP. Please reimport the Open Hub destination to execute the appropriate Process Chain.
I've tried re-activating everything in BW and also re-importing the OHD in BW, but nothing works. I've even tried to re-create everything from scratch. The process chain I've created do indeed contain an Open Hub DTP.
One addtional question: I've activated the process chain, but do I also need to schedule it in BW (like you do with e.g. process chains for time points to be used in Broadcasting)? Note, I've tried both scheduling/no scheduling and does not work either way.
Any ideas/suggestions?
Thanks in advance,
Jacob

You must implement following SAP Notes in SAP systems in order to make Data Services Open Hub functionality work correctly:
SAP Note 1270828 : (Open Hub Process chain is not imported into Data Services repository).
SAP Note 1294774: (Open Hub import failed - when you call the module RSB_API_OHS_DEST_SETPARAMS, th system tries to open a GUI)
SAP Note 1330568 version 3: (This note has fixed "Process Chain <ZTEST2> of Open Hub destination <ZTEST> at SAP system <.......> no more contains Open Hub DTP. Please reimport the Open Hub destination to execute the appropriate Process Chain").
SAP Note 1079698 - 70SP16 (Enable check box "Automatically Repeat Red Requests in Process Chain" in the DTP Execute)
SAP Note 1346049: (Error 028(OSOH): Request <n> cannot be locked.)
SAP Note 1338465 #with 1293589 as pre-requisite: (The ABAP/4 Open SQL array insert results in duplicate database records.)
SAP Note 1342955: (0 data records transferred)
Edited by: Ajit Dash on Nov 13, 2009 10:37 PM
Edited by: Ajit Dash on Nov 13, 2009 10:39 PM
Edited by: Ajit Dash on Nov 13, 2009 10:39 PM

Problem in creating Data/Service in FlashBuilder 4 beta 2 with this error .cvc-elt.1: Cannot find the declaration of element 'model'

hi
i have a problem after installing flashBuilder 4 beta2 .
when i want to create Data/Service with BlazeDs and when i click on button finish
this error shown and I can't do anything with it .
in flashBuilder beta1 it's work perfect .
if any one in thereand know why?
please help me
ERROR: XML parse error : Error on line 1 of documen : cvc-elt.1:Cannot find declaration of element 'model'. Nested exeption:Cannot find declaration of element 'model'.
thanks

Hi,
Thanks for your feedback
Can you attach your sample project and provide details on the Flash Builder and BlazeDS builds you are using?
Also add your vote to http://bugs.adobe.com/jira/browse/FB-23479 a similar known issue
Thanks,
Balaji
http://balajisridhar.wordpress.com

BO Data Services 3.2-Job fails with 'TNS:No appropriate service handler err

Hello all -
One of our DS jobs has started failing intermittently showing the following error in its log:
Data flow DataFlow_1 - OCI call <OCIServerAttach> for connection <abc> failed: <ORA-12519: TNS:no appropriate service handler found>.
This has started happening recently after we've upgraded the repository database form Oracle 10g to Oracle 11g (11.1.0.6). The source and target are also 11g.
If anyone has encountered this error before, please can you provide some pointers on how to troubleshoot/resolve this.
TIA.
Regards,
Tarun.

I have found this thread which talks nearly same about your issue.
TNS:listener could not find available handler witht matching protocol stack
The session count has to be decreased, that is the crux that comes out from this thread.
Listener some how have a count of the incoming connection request. If that number tries to go beyond process parameter value,this error is reported.Now I amnot sure that why this is happening in your case as the parameter value is already higher than the incoming connections.
And voilla!You are using XE I believe so its a bug in it. Read this thread,
Re: Intermittent ORA-12519 error on 10g XE
HTH
Aman....

Data Service Xi3.1 jobs don't get terminated

Hello,
Does anyone experienced this behavior where DataServices Job Execution History shows that job is running but actually has stopped.
Thanks in advance,
Kristi

you will see this in following 2 situations
the job has terminated abnormally (abrupt system restart or on unix user has killed the job manuall using kill -9 which can't be trapped hence job won't terminate gracefully)
the job is running for a long time and repository connection has timedout hence DI repo tables are not getting updated
the job history page in Management Console, reads the info from ALVW_HISTORY any condition that prevents update in the AL_HISTORY table on which this view is based with show this problem
check the end_time and status of the job is ALVW_HISTORY, the SERVICE column is the name of the job, do a order by start_time DESC

Data services job failes while insert data into SQL server from Linux

SAP data services (data quality) server is running on LInux server and Windows. Data services jobs which uses the ODBC driver to connect to SQL server is failing after selecting few thousand records with following reason as per data services log on Linux server. We can run the same data services job from Windows server, the only difference here is it is using SQL server drivers provided by microsoft. So the possible errors provided below, out of which #1 and #4 may not be the reason of job failure. DBA checked on other errors and confirmed that transaction log size is unlimited and system has space.
Why the same job runs from Windows server and fails from Linux ? It is because the ODBC drivers from windows and Linux works in different way? OR there is conflict in the data services job with ODBC driver.
===== Error Log ===================
8/25/2009 11:51:51 AM Execution of <Regular Load Operations> for target <DQ_PARSE_INFO> failed. Possible causes: (1) Error in the SQL syntax;
(2)6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM Database connection is broken; (3) Database related errors such as transaction log is full, etc.; (4) The user defined in the
6902 3954215840 RUN-051005 8/25/2009 11:51:51 AM datastore has insufficient privileges to execute the SQL. If the error is for preload or postload operation, or if it is for
===== Error Log ===================

this is another method
http://www.mssqltips.com/sqlservertip/2484/import-data-from-microsoft-access-to-sql-server/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Data Services job server crashed and won't start backup

Hello,
I was running some jobs on data services 4.2 sp3 windows server 2012R2 and they all failed and the job server went down. None of the jobs that failed had an trace file or error log in the management console. Now i am unable to open data services designer or data services server manager, when I try to open them nothing happens. Also the SAP Data services job service cannot be started. The job server was running fine for a few weeks before this. This has happened twice already today the first time the only way i was able to fix it was run the repair on the dataservices install. Can someone please help me what know what is causing this and how it can be fixed.

Hi Tyler,
It was Windows specific issue please refer the below link & KBA
How To Fix Windows Service Error 1053
http://windows-exe-errors.com/how-to-fix-windows-service-error-1053/
1986247 - Error "Windows could not start the BusinessObjects Data Services service on local computer" occurs in Data Services 4.1
https://service.sap.com/sap/support/notes/1986247
1992260 - Error: Windows could not start the SAP Data Services service on local computer, after upgrading SAP data services and deleting job servers SAP Data Services 4.2
https://service.sap.com/sap/support/notes/1992260
Hope this will help!!!!
Thanks,
Daya

Odbc connectivity with Data services 4.2

Hi guys
i have very general question to ask...
presently i have dataflow which has one source table connects to query transform and further query transform connects with target table.. query transform has no filter, no order, no group by ... it is simple select * from source table ......... company where the source tables resides have given us their odbc driver to connect and extract same data... but it takes very long time to copy at our end.. i admit that data is more than 100 million (takes more than 4 hrs) records.. but could you please help me to debug what can be done to increase the performance and how can i check why it takes very long time...
ODBC connection set up in administrative tools->ODBC application.. is there any other way to set up the odbc....
when i run same query on the tool provided by them to connect with LIVE system.. it takes half of the time taken by data services to copy..
I have tried changing the dataflow properties between in-memory/ pageable with degree of parallelism.
what can i check on my end if anything wrong going at my end... before i tell anything to source company to see...
I would be very greatful if anyone can help me to understand same.
regards

Hi,
If your database is SQL server, install a SQL native client on the DS machine to connect to the DB. You don't need a ODBC for connection of DS with DB.
Check this, assuming your DB is SQL.
Can Data Services 4.1 Datastore connect to 32-bit MSSQL 2005 DB?
SAP Data Services 4.1 - SQL Server Native Client issue
Arun

Data Integrator Job Server - How to Enable

Post Author: Janet Gilmore
CA Forum: Administration
The Job Server associated connected with our Data Integrator in not enabled. We have stopped and started the job server and get no errors, but when we look at the Data Integrator Server Manager, the Enabled column says NO. Any suggestions as to how to get the Job Server Enabled?
>> Update: This turned out to be a license key problem. We had downloaded a license that was for a different version that the Job Server that was installed. We got a new license key and downloaded it and everything worked!

to be able to install the Data Integrator Job Server correctly
its all about the license of the product
im sure you have License Authorization Code
go to this link
a) Go to http://webkey.businessobjects.com on the Internet.
b) Copy the Authorization Code and paste it into the License
c) Click the 'SUBMIT' button.
d) Save each license file in with a *.lic extension
im sure if you follow the instructions you will be able to install the software correctly

Data Services XI3.1 function module files for SAP R/3 is not working

Hi guys,
Thank you for the quick response so far. I am very grateful to you all.
I got an issue and will try to explain as detail as I could and
hope ur guys won't mind. :P
I pass the functions module to SAP tech guy to install to SAP using CTS
method, and using 900086.R63 file type because my chinese client is
running SAP on unicode environment.
My DS installed on my laptop client; job server plus db2 is on HP
unix. SAP is on another HP Unix server. The function module I used is
supplied from Data Services XI3.1.
Anyway, the installation is successfully done with GUI wizard windows of
SAP Workbench instead of tp command line method.
1)However, I checked the ZAW0 function group, I opened and can't see any functions
listed under it, although the table structures ZACTA, ZTAB2048 and other items
were created.
2)So I tried to create SAP Datastore, Transport Target, etc and tried to
extract file. It failed and log said "can't open file ---
/db2/temp/curcode.txt". I checked and SAP working directory /db2/temp didn't have
curcode.txt, because the result file supposed to be extracted and stored there.
The SAP tech guy checked SAP and cant find generated ABAP program of
ZCURCD is running anyway, although my local CURCD ABAP program is
created.
3)Is it the 900086.R63 not complete? Is my function installation correct? I could view data
on datastore, but just cant run job to extract. Another non-unidcode 900200.S08 group
has larger file sizes. Should I try to install also this 900200.S08 files? Will it corrupt SAP
and cause system errors?
4)After that, I had tried to install the functions manually into ZAW0
one by one using cut and paste, however after that, I cant view the data view anymore with
error. Besides, I tried to run Check on the functions and they all returned
syntax errors, so I cant Activate any of them with SAP. Maybe dependency is missing??
Then, I deleted the manually installed functions and can view data again, but just cant extract
data by job.
5)Another side issue is all these SAP datastore creation and viewing is
through DI 11.5 old installation. The new Data Services X3.1 unable to
create datastore with database error, although the function module
installed is came from Data Services. Does anyone know the issue?
Thank you very much to read it patiently. :P

Hi,
Thank you for the informative link. It did help a lot in solving the problem.
(1) to (4) --- The Sap tech guy didnt install the function programs correctly, and he redo the transport again using CTS. Now I can see all the functions inside the function group ZAW0. While for the problem of cannot generate extracted file to SAP working directory for downloading, it is due to unix directory access permission setting. And also have to include the ftp username into SAPSYS user group as the help link suggested.
(5) For this problem, I reinstalled again the DS with all required components like Server Manager. The network technical guy helped me with the first installation, and the installation was not complete. So now the issue is solved, I can create R/3 Datastore with DS.

Post Installation steps of SAP Data services

Hi,
Could someone provide screenshots/steps of the post installation of SAP Data services on Unix.
Thanks,
Rajiv

Hi Rajiv,
Once DS is installed you need to do few more things to make the system ready to use
Configuring repositories
Create a database for the repository on your database server (take assistance from DBA)
Create the repository in the database with the Repository Manager.
Register the repository in the CMC with the Data Services application(here you have to give database details which you have given for creating repository (refer point a &b)
Assign user access to the repository with the Data Services application.
Configuring users and groups
Log into the CMC Use Admin credentials
Create user accounts and assign them to Data Services user groups with the Users and Groups application.
Assign repository access to your users and groups with the Data Services application
Configuring Job and Access Servers
Add and configure Job Servers with the Server Manager
Add the Job Server configuration
Associate local and profiler repositories with the Job Server
Add and configure Access Servers with the Server Manager
restart the Data Services service and verify that the Job and Access Servers are running
Deploying web applications (BODS automatically installed web app if not you need to manually deploy
Configuring profiler repository connectivity
Login to the Central Management Console (CMC) and register the local repository and select the repository connection type on the Data Services Repository Properties screen
Register the profiler repository and select the connection type to also TNS-less or DSN-less.

Configure Job Server    [NOT INSTALLED] in Linux

Hello All,
I installed IPS and DS 4.3 SP3 on it in Tomcat in linux environment .
In server manager i found "Configure Job Server    [NOT INSTALLED]"
So how do i install this component.
Regards,
Aisurya

Hi Puhan,
Please refer the below steps for configuration of Job Server:
(a) Log in Linux
(b) Go to BODS Directory
(c) Run below command
$ . ./al_env.sh
$ ./svrcfg
(d) Below details will appear
** Data Services Server Manager Utility **
       1 : Control Job Service
       2 : Configure Job Server
       3 : Configure Runtime Resources
       4 : Configure Access Server
       5 : Configure SNMP Agent
       6 : Configure SMTP
       7 : Configure SSL
       8 : Configure Native Component Supportability
       x : Exit
(e) Enter 2
(f) Then Enter the New Job Server name: JOb_Server
(g) Then Enter Port Number:3500 (Enter Port Number as per your environment)
(h) Then SNMP Enable: Y
(i ) Then Adapter management
Port Number: 4001 (Enter Port Number as per your environment)
(j) SSL Protocol: Y
(k) Enable SNMP: N
(l) Now Enter Database details
After that below page will update with JOb Server Information associated with Local repository
Hope this will help!!!!
Thanks,
Daya

IPhone 5 cellular data services failing

ISSUE/SYMPTOMS: iPhone 5 ONLY: Cellular Data stops intermittingly, cellular data locks up without warning, Wi-Fi data connection not working on occasion, iCloud contacts, calendar and reminders not updating, Find My Phone not working, mail or Internet not available or server time-outs. No error messages though. All of these are symptoms of no data service. Problems seem to be related to iPhone 5 failing to switch between LTE and 4G or 3G data services on AT&T.
My iPhone 5 32GB AT&T version (iOS 6.0.2) along with my clients and family using iPhone 5 in the state of Oklahoma are having this issue on their AT&T iPhone 5's: no cellular data connection re-established if at anytime the LTE connection is lost or weak. As with iPhone's prior to iPhone 5, the iPhone 5 is supposed to drop down to the next tier of data service and re-connect to cellular data service when the higher speed cellular data service is not available. Apparently this is not working well on the iPhone 5.
What led me to research this LTE issue was that my iPhone was not syncing on iCloud with contacts, calendars and reminders with my other iOS devices. Other times this issue became apparent was when iMessage quit sending and receiving until I would reboot my iPhone (sometimes it would finally send the message as a “text message”). When I had these problems I also found out I was not getting any cellular data service for Internet browsing, mail, Maps, Find My iPhone, etc. This would happen without notice. In other words I would not receive any notice or error message that data service had stopped other than the fact I was not receiving any mail, iMessages, or iCloud sync updates. My only resolution was to reset or reboot my iPhone several times a day, and that would resolve it about 70% of the time.
I have talked to Apple Support on 2-3 occasions in the last week and AT&T Support twice in the last 2 days. If it is really true, only the AT&T Technical Support Advisor informed me of a nationwide issue relating to iPhone 5 and LTE: iPhone 5's are not re-connecting to 4G or 3G cellular data service once the LTE data connection is lost or dropped... the voice calls continue to work, but cellular data service fails and stays locked up without an error message until the customer reboots the iPhone.
Obviously this is very unacceptable. We depend on these data services and at minimum need to know when it stops working instead of finding out from a phone call that someone sent us an important email or something.
The AT&T representative also said that both AT&T and Apple are aware of and are working on the issue as it is a nationwide problem with iPhone 5 and LTE. The Apple Support Advisors I talked to made no mention of this "known" issue. AT&T said that it is partly AT&T responsibility because the capacity of LTE is overloaded and cellular data connections are dropping because of the lack of coverage and/or capacity. They actually refunded my data service for a whole month in apology for the inconvenience (I did not even ask for that--I just want my data service to work). But they also said that Apple has responsibility in this issue because the iPhone 5 should drop down and re-connect to the next lower tier of data service when LTE is not available or lost; instead, it is locking up somehow or it still thinks it is connected to LTE when it is actually not. I don't know how accurate these statements are, but my problem is real.
TEMPORARY WORK-AROUND / FIX FROM AT&T: Disable LTE on the iPhone 5. Or when you figure out that data is not coming to your iPhone, use Airplane Mode ON/OFF for a few seconds to force re-connection to a tower without rebooting the iPhone. You can Disable LTE on the iPhone 5 in SETTINGS/GENERAL/CELLULAR. I have disabled LTE on my iPhone 5 and have not had any of these cellular data issues since.
Disabling LTE is not acceptable either, but it is working. At least I seem not be losing connection or locking up without knowing it. In my office over the course of a day, my iPhone 5 will jump back and forth on LTE and 4G sitting in the same place. Disabling LTE has stopped this and the problem, but the iPhone 5 should switch cellular data services seemlessly just like the phone switches towers on a phone voice call seemlessly (most of the time).
WI-FI ALSO STOPS WORKING SOMETIMES AFTER THIS LTE disconnect / lock-up issue: That has been my experience along with my clients and family as well. If you use Wi-Fi a lot on your iPhone it will hide this LTE issue until you leave your Wi-Fi and get on LTE and then drop LTE (silently) and then go back to your Wi-Fi. My experience has been I have to reboot the iPhone to even get Wi-Fi working again after that happens.
I do not know if some of these comments and analysis are really accurate or valid or not... all I know for sure is since I upgraded my iPhone to the 5 along with my other family members and clients, we have had "no data" on many occasions and are continually rebooting our iPhones and looking for what is wrong.
My questions to the support community are these:
     1. Is anyone else having this issue? Or is it just me and my few? Maybe a lot of people do not realize they are not getting their data because they are on Wi-Fi most of the time or they are just rebooting and not trying to identify the real problem. AT&T said it was nationwide iPhone 5/LTE issue. Anyone else heard that from either Apple or AT&T?
     2. Is this an iPhone 5 / Apple issue or is AT&T solely responsible? Or is it both? Where do we get a solution??? Is AT&T LTE holding false connections with iPhone 5 or is the iPhone 5 failing to recognize a dropped LTE cellular data connection and then failing to attempt to re-connect with 4G or 3G?
     3. Did I miss where this issue is posted? I searched Apple Support and Communities and did not get any hits. Any updates or further insight on the issue? Any other fixes other than Disabling LTE?
      4. If this is in fact a real issue belonging in part to the iPhone 5, we need to escalate Apple’s attention to it.
Thanks in advance for your help and feedback.

Thank you fellow users and experts for your feedback and updates. Sorry about the large font on the original post... accidental via cut and paste.
I have escalated the issue with both Apple and AT&T. I actually got senior level troubleshooters from both Apple and AT&T on the phone at the same time... rare moment. Here are the key points of the update:
     1. AT&T did NOT confirm the earlier statement by another AT&T Technical Support Agent that this was an emerging nationwide issue about iPhone 5 and LTE losing data connection and not reconnecting at a lower level or re-connecting to LTE once the signal came back. So that earlier statement was not accurate as suspected by all of us. The senior tech at AT&T said he has seen this issue sporadically over the last month or so, but only with about 3-4 customers. He said it seems to be location or phone dependent (some phones not all phones).
     2. The Apple Tech was satisfied that all that could be done to eliminate my issues possibly relating to my instance of software / iOS had been accomplished except erasing my iPhone and restoring as a new phone (I have avoided this inconvenience with the argument that other family/clients with the iPhone 5 have had the same problem).
     3. AT&T went so far as to examine which towers I had been connecting to over the last week and looked at other technical data that could possibly explain the issue. I now know I have 3 towers that provide LTE within 4 miles of my home/office, one within a half mile. But so far there is nothing to explain or even properly identify the issue. AT&T offered me to take my phone to an AT&T store, try to force replicate the problem there, if so, the store would put my SIM card in a brand new iPhone 5 (just to test) and try tor replicate the problem again. If replicated on a new phone, there is a deeper issue; if resolved on a new phone, the answer is obvious. I have not taken the time to do this yet.
     4. On Friday, Jan 4, 2013 while talking and between the tech support calls (on a different phone), I was able to re-create the problem 2 separate times in my home/office by forcing my iPhone to weaken its connection to service (burying it under electronic gear) and then waiting a few minutes, then trying to browse the Internet--no data service unless I manually reset the connection. I am only able to cause the issue to occur if there is at least 15 min of idle time after a weak signal condition AND only if I don’t completely lose a connection to cellular voice service. It seems that if you go down to NO SERVICE the phone will do new a search and keep searching until reconnects to LTE or other signals correctly, but a weak connection seems to be strong enough for voice service but can sometimes cause the LTE data service to stop without reconnecting to LTE, 4G or 3G unless I manually intervene. It also seems that idle time with a weak connection is also necessary to re-create the problem manually. Since Friday, I have not been able to re-create the problem. This has been an intermittent problem, so who knows.
FYI, I have never had this problem with my new iPad (also on AT&T LTE) that has been with me when the iPhone fails to have data service, but my iPad is never in my pocket or other places with perhaps less signal.
Again, if you are connected to Wi-Fi on your iPhone 5 most of the time, you may never notice this issue if you are even having it.
So far no progress on the real issue or resolution, but both Apple and AT&T have put forth very admirable effort.
If you or others you know are having this issue, please take the time to post a reply to this issue. Thank you.

How to use BusinessObjects 4.0 Data Services (BODS)

0.I am looking for BusinessObjects Data Services (BODS) for dummies
1. How to connect Business Object 4.0 Data Services (BODS) with SQL server 2008R2
2.I would like to connect SAP HR to Business Object 4.0 (BODS) Data Services

Hi,
I would suggest you post the questions into the forum for Data Services.
Ingo

Using variables within the definition of ExcelWorkbook in the Data Services 4.2

Hi Together
We have installed the Datas Services 4.2 with a matching SAP BO 4.1 Installation
The Repositories are hosted on a MS SQL Server 2012R2.
The System is a Windows 2012 R2 Server
Within a Repository I try to define an ExcelWorkbook.
Within this Definition I need a
Format name,
the Directory where the Excelfile is in the File System,
the name from the ExcelFile.
To define the Access method I will use the Namend Range.
Is it possible to use for the Namend Range a defined variable with a namend Range.
I’ve tried a lot notations, but I am not able to use that Variable.
What is a possible Solution ?
Regards
Ralph

Hello Friend,
You indicate to go to the Central Management Console (http://server/BOE/CMC), click the Data Services option.
Select the Configure a new Data Services Repository, complete all fields and click Test Connection. If everything is ok and return success message, click save.
The repository created will appear in your repositories list, then right click it and select the User Security option. Make sure that the Data Services Administrator Users group is present and with Full Control access. To ensure that your user has access, you can also add it through the Add Principals option. Select the desired user, pass to the other side and click the Add option and Assign Security and include Full Control permission and apply.
In version 4.2 the ability to create access groups within the Central Repository was added.
To create and manage such groups need access SAP Data Services Management Console:
http://server/DataServices/launch/launch.do
Once you have successfully logged on, click the Administrator button.
On the left side there are some options, espanda the Central Repositories option and if you have properly created the Central Repository it will appear in the list.
Click User and Groups note that by default comes a set created (digroup), select the User tab and click the option later add.
Then enter the information which user, group, status and description and apply the changes.
Made these procedures you can enable your central repository through the DS Designer and create new groups.
Hope this helps.
Hugs

Data Services 4.0 Job Server ODBC DB2 library error

Similar Messages

Maybe you are looking for