Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D
I checked in RSA2 (data source repository in BI) and it exits.
Now that I am trying to use the generated datasource to load another MasterData Char Attributes, I get the error message u201DSource Not activeu201C, I am trying to create a transformation from 1st infoObjectu2019s export datasource to this object (both are of the same type etc)..
I am aware that we can use the program RSDS_DATASOURCE_ACTIVATE_ALL but this only works if we can see the datasource is RSDS (which I can not for this Datasource, perhaps the reason being that it is Function Module based? )
How else I could activate it? What other steps I should take or anything that can help me? Please give your suggestions and I will say THANKS the SDN way.

I had the same problem today with an export DataSource generated on a planning area in our production SCM system.
I debugged running RSDS_DATASOURCE_ACTIVATE_ALL in our QA system for the same DataSource amd saw that the program calls function module RSDS_DATASOURCE_COLLECTION_ACT to do the activation. I ran the function module in production using the same parameters.
Our DataSource is 9A_PRG_PA for source system SCP100. I used SE37 to run function module RSDS_DATASOURCE_COLLECTION_ACT with these parameters:
I_T_OBJNM     9A_PRG_PA                     SCP100
I_WITH_CTO
I_CONTEXT     'ACTIVATE_ALL'
I_FORCE                     X
This made an active version of the DataSource appear, and I was then able to run RSDS_DATASOURCE_ACTIVATE_ALL to activate it properly.
Cheers,
Paul

Similar Messages

Error while creating Data Source for master data attributes

Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijith

apologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

How to find active master data source in the bw system

Hi
Can anyone guide me how to find the active master data source in the bw system

Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.

Capturing Data Source Activation in a transport

Dear Gurus,
I 'm using the 0TR_LP_1 data source for my data loading and facing the following issue.
In DEV system , this data source have been activated by one of the developer but not captured in any of the transport request.
How can i capture the activation in another transport so that this data source can be activated in QAS and PRD system via transport.
Thank you
BR

Hi ,
You can fix this issue by following the below steps.
1--> Go to T code RSA6
2-> Find your data source --> Click on Object Directory Entry
4--> Change the package --> It will ask you for a transport
5--> Save it >Double click on your data source> Generate data socrce
6--> Then transport your data source
On the BW side
1--> Replicate data source
2--> If required reactivate transfer and communication structure using standrad programs.
This will solve your issue.
-Vikram Srivastava

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

Data source activation

HI Experts,
we are enhancing the data source 0CRM_SRV_PROCESS_H.After replicating the data source in bw,we are mapping the info objects with fields in transfer rules.When we are activating the transfer rules in BW it is giving the error no psa data exist for the data source.
and when we go to display data source the Active version is "does not exist".and it is not at all allowing to activate the transfer rules.
I tried RS_TRANSTRU_ACTIVE_ALLl,but it is taking long time and it is not coming.
I also go through the sap notes mentioned in the earlier posts,but does not work.
We are using 3.5.Can any one help me how to rectify this error.
Thanks in advance
sridath
Edited by: sridath on Aug 24, 2009 7:55 AM

Hi All,
we tried all the possible ways to activate the data source,but was fialed.
Now we are deleting the data source and replicating again,as it is already there in production.after transporting the new replicated data source the psa data will be lost.
in order to get the psa data how do i proceed further.
please help me..
sridath.

Whats the difference (Generic Master Data Source vs Transaction Data Sce)

Hi Gurus,
I have been wondering on whats the difference when creating GENERIC Data Sources:
1.) Transaction Data
2.) Master Data
Pls. dont give an answer like (A Master Data Generic Data Source is used to populate Master Data Info Objects and Transaction data Sources are used to populate ODS and CUBES.)
This definition is FALSE since I can use a "Master Data (Data Source)" to populate my ODS.
They only differ in Process Chain since the Action when loading data using Generic Masterdata Data Source is Attribute Change Run. Unlike when loading ODS using Transaction Data Source will use "Activate ODS Data".
Hope Somebody will clarify this...
--Jkyle

Hi Jkyle,
at the moment I think it is more or less a grouping information in BW and additionally a information for you, your users, ... what type of data is being loaded thru the datasource.
With grouping I mean just a type of information used for the list that opens if you'll assign a datasource to a infosource.
With type of data I mean some sort of classification of the data for a special application. I can imagine, that the same data can be used as transactional data as well as as master data depending on the application. A good example for this can be the header data. For some applications you have header (transactional) datasources providing a header counter and additonally you have the document number (basically the header information) with some attributes as master data.
May be there is a difference in the function modules that are called to extract the data, I am not sure about this.
Hope this help a bit.
regards
Siggi

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

Power view couldn't load the model or data source because the data source type is not supported

Hi,
I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
Power view couldn't load the model or data source because the data source type is not supported.
Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
Thanks in advance

What type of SSAS install are you using?
PowerView in Excel 2013 currently only supports Tabular data sources.
Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
http://darren.gosbell.com - please mark correct answers

Weblogic Server 10.3.6.0.8 one of data sources failing while other 6 not

Hello,
I have 7 data sources connecting to the same database schema. After I upgraded the environment (production) day before yesterday evening I noticed one of the data sources start failing with exception below:
"Connection test failed with the following exception: weblogic.common.resourcepool.ResourceUnavailableException: No resources currently available in pool ePayBatchDS to allocate to applications.
Either specify a time period to wait for resources to become available, or increase the size of the pool and retry.."
The data source capacity size is Min:1 Max:30, I increased to be as 1-50, after change it is worked for 15 minutes then it back again giving the same error message above. Please not that I have in production two servers as high availability approach however I upgraded one of them till now only and the same data source in the old server not failing.
Please advise.
Old Environment Specifications:
Weblogic Server version: 10.3.4.0
OS: Sun OS10 SPARC 64-bit
JDK: 1.6.0 update 32 64-bit
New Environment Specifications:
Weblogic Server version: 10.3.6.0.8
OS: Solaris 11.1 (64-Bit Mode) SRU 20 (18 June 2014 patchset).
JDK: 1.7.0 update 55 64-bit
Thanks,
Mohd.

Hii,
No resources currently available in pool ePayBatchDS to allocate to applications.
This exception cleaarly shows the connection are not available to allocate to ePayBatchDS datasource.
As you said there are altogether 7 data source out which six are working and one is not.
In general if you are creating a datasource and providing a connection pool size we should consider the number of connection available or allowed at the database side as well.
Please cross check at the DB side the number of connection available and based on that try to tune the connection pool size in your data sources.
Regards,
Abdul

Use of "with master data & with out master data" at DTP update level

Hello experts,
In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
Thanks in advance,
Zakir.

HI
HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
Load the relevant master data before you load the transaction data.
If you set this indicator, the system terminates activation if master data is missing and produces an error message.
If you do not set this indicator, the system generates any missing SID values during activation.
In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
thx
vijju

Can i upload first Transaction data rather than master data what will hap

hai,
can i upload first Transaction data rather than master data what happends going in bw regarding performance issues like indexes
let me know
regards,
murali

Hi Murali,
you can load the transaction data before master data. The main impact will be, that the system has to generate sid's and has to populate the sid-table of the master data objects while loading the data to a data target (cube or ods that is activated for bex reporting). This basically means that your data loads will take some more time. Additionally, if you need the master data attributes somewhere in your update or transfer rules, you will not get the correct information.
So basically it is always a good approach to load and activate the master data before loading the transactional data. But anyway, specially in the development environment I usually don't load all the necessary master data.
regards
Siggi
PS: navigational attributes of the data targets will not be available until you loaded the master data and scheduled the attribute and hierarchy change run.
Message was edited by: Siegfried Szameitat

Data source for this data connection isn't registered for Power BI

Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db. How do I register my connection to the data source? Is this a fix on SQL server or Power BI?
FAILURE INFORMATION
Failure
Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
Data connection Status
SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
Thanks for your help.

I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
Thanks
Fabian
In case it helps this is the actual error:
Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211
Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
doesn't seem to like the data the Gateway is sending back to server.
The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
The request took 00:00:00.0000105 seconds.
Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940

Over write the existing master data with new master data.

hi friends,
we have 2 sources for master data text like source A and source B to load the master data text and as per requirement we have to stop load from source A. But if you check the master data target still the old records are existed (from Source A), if i try to delete those records as you know it is not allowing...and more over if we want to delet the mastr data we have delete the transaction data.
In Mycase i don't want to delet the Transaction data and i need to over write the existing master data i.e Request A with Rquest B.
Is there any solution for this issue.
Thanks in advance,
Sruthi.

For overwriting the text from source B you have to have transformations from source B to your text datasource of your characteristic. Then you map the text coming from source B to the text for the characteristic.
If it comes form source B the key for that characteristic with text, it will overwrite the text existed for that characteristic to the same key.
For example you have 0employee and have a text datasource in source A which has employee_id and employee_name. In the Bw you have mapped in your transfer rules the employee_id to the employee_id and the employee_name to the employee_name. So for example you have extracted from source A the record:
employee_id   employee_name
0001               xpto
If you have a same datasource of text coming from source B, if you do the same mapping in transfer rules in BW coming from source B, and you bring for example the record:
employee_id   employee_name
0001               zzzz
You'll overwrite the old value of xpto to the new value zzzz
Diogo.

Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

Similar Messages

Maybe you are looking for