Data source not delta capable

Hi ,
i have an issue here my copa datasource is not delta capable, how will I make it delta capable.I dont want to use an ODS here.please this is an urgent issue
regards
rak

Hi Rakshita,
Check here.......
COPA Delta
Simple Question on Delta Info Package
dummy delta/pseudo delta
Psedo Delta
Delta load for flat file
Regards,
Vijay.

Similar Messages

How to make CRM data sources for delta capability?

Hi All,
I know that the CRM data sources 0CRM_SALES_ACT_1, 0CRM_QUOTATION_I, 0CRM_SALES_ORDER_I have delta capability.
At present we are doing full loads daily but it has got some performance issues.So we are thinking to make these as delta loads.
Already some one has made a trail to make delta loads but not successful for some unknown reasons.
Could you please suggest me the steps to make these data sources delta capable both in CRM and BW systems?
As this is urgent...Please suggest ASAP.

Hi
Go thorugh Below the note: 692195
Summary
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
transfer'   > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT,CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE,CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP,CRM_ORD_LP,CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
   these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
4.a)If required activate the datasource
    Go to transaction BWA5   > select the required datasource and
    activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
   Go to transaction RSA1   > modeling   > infosources   > select the
   infosource   > right mouse click on the selected
   infosource   > choose option replicate datasource
    Activate the infosource.
6. Go to the scheduler for the infosource   > select delta in the
    update >choose the option PSA only (in the Processing tab)
    > start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
   an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
   click on the Datasource and remove the flags in the column 'Hide
   Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
    the transaction BWA1 then change and save the datasource, and then
    activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
     0CRM_OPPT_ATTR, then stop the delta process in the BW
     system
2) In the CRM system, Make the entry in the table SMOXAFLD
   for the datasource with the Key
   as 0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Gotothe record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.
Thank you,
DST

Help Me "Data Source - Not User Data Source"

Hi All!
I have written an addon in Service Call Form To add new Matrix in this form with code as follows:
Dim oLink As SAPbouiCOM.LinkedButton
oFormServiceCall = SBO_Application.Forms.GetFormByTypeAndCount(60110, 1)
        oItem = oFormServiceCall.Items.Item("159")
        oNewItem = oFormServiceCall.Items.Add("Matrix1", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
        oNewItem.Left = oItem.Left
        oNewItem.Width = oItem.Width
        oNewItem.Top = oItem.Top
        oNewItem.Height = oItem.Height
        oNewItem.FromPane = 8
        oNewItem.ToPane = 8
        oMatrix = oNewItem.Specific
        oColumns = oMatrix.Columns
        oColumn = oColumns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "#"
        oColumn.Width = 20
        oColumn.Editable = False
        '// Add a column for BP Card Code
        oColumn = oColumns.Add("callID", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Call ID"
        oColumn.Width = 20
        oColumn.Editable = True
        oColumn = oColumns.Add("subject", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Subject"
        oColumn.Width = 120
        oColumn.Editable = True
        oColumn = oColumns.Add("customer", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Cust.Code"
        oColumn.Width = 30
        oColumn.Editable = True
        '// Link the column to the BP master data system form
        oLink = oColumn.ExtendedObject
        oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
        oColumn = oColumns.Add("custmrName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Cust.Name"
        oColumn.Width = 120
        oColumn.Editable = True
        oColumn = oColumns.Add("itemCode", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Item Code"
        oColumn.Width = 30
        oColumn.Editable = True
        oLink = oColumn.ExtendedObject
        oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_Items
        oColumn = oColumns.Add("itemName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Item Name"
        oColumn.Width = 100
        oColumn.Editable = True
And code to bind data to matrix
oDBDataSource = oFormServiceCall.DataSources.DBDataSources.Add("OSCL")
        'oUserDataSource = oFormServiceCall.DataSources.UserDataSources.Add("OSCL", SAPbouiCOM.BoDataType.dt_LONG_TEXT)
        oColumn = oColumns.Item("callID")
        oColumn.DataBind.SetBound(True, "OSCL", "callID")
        oColumn = oColumns.Item("subject")
        oColumn.DataBind.SetBound(True, "OSCL", "subject")
        oColumn = oColumns.Item("customer")
        oColumn.DataBind.SetBound(True, "OSCL", "customer")
        oColumn = oColumns.Item("custmrName")
        oColumn.DataBind.SetBound(True, "OSCL", "custmrName")
        oColumn = oColumns.Item("itemCode")
        oColumn.DataBind.SetBound(True, "OSCL", "itemCode")
        oColumn = oColumns.Item("itemName")
        oColumn.DataBind.SetBound(True, "OSCL", "itemName")
But It's error when Run at the row is bold. This error:
oColumn.DataBind.SetBound(True, "OSCL", "callID")     Run-time exception thrown : System.Runtime.InteropServices.COMException - Data Source - Not User Data Source
Please help me fix problem.
Thanks
Edited by: Tao lao on Mar 5, 2008 3:10 AM

I think, u can't bind the system table system columns to the column of the matrix in the form which is bound to the same table.(though, m not sure on this.) service call is by default bound to OSCL. If u try creating a user defined column in OSCL and then bind it, it works. but, if CallId is already bound on form, and u r bnding it one more time, it will give you error.

File data source not found with guest login???

Hello everybody,
i'm working with BIP 10.1.3.2.1 on Win2003/Tomcat.
Everytime if i call a report with a file data source directly via url or in the gui via guest login i get the following error message: "File data source not found: <file data source name>".
If i use a login in the gui which have the explizit permision to use this data source then there is no problem. Well at this point u might say then use this account, but - if i call a similar report with a database data source directly via url or guest login in the gui everything works fine. So, where is the point? Any ideas?
Best regards
Ralf Kanis

Hi guys,
I'm running into exactly the same issue. The problem seems to occur only when the report being accessed by guest is a file data source. The only other option I could think of is setting up SSO for BIP and the application issuing the URL to the report.
Could'nt find anything else in the documentation or known issues list that might fix this without having to setup Single Sign On. Any further luck with your investigation? I'd appreciate any feedback.
Thanks
Jonathan Cruz

Delta enabled generic data source not updating delta

HI,
   Created one Delta enabled generic datasource with the help of ztable .Fill the content of table by manual entries.
   While executin init,records are extracted from R/3 system. After made a change in table entries , it is not captured in RSA3.
   Data source is avaialble in RSA7 after execueting init.
   Delta type== TIME STAMP
   fIELD NAME=zTIME
SAFETY LIMIT=30 SEC
ITS FROM 'NEW STATUS FOR CHANGE RECORDS'
Please help me on this issue..
Regards,
MohammeD

how did you create your data source? - based on view, table for Function Module?
If it is based on a View or table, ideally delta should have worked. If it is not working, please chedk the data type of the field. Make sure that delta field (i.e. ZTIME) is getting updated evertyime you change any record in ztable. While extracting data in RSA3 in delta (D) mode, make sure you also give the target system ID. Also try runnign the delta infopackage in BW if it fetches data.
If nothing works, try creating your data source again.
If it is based on Fuction Module, you will have to include the delta functionality in your code.
Regards,
Gaurav

Delta enabled generic data source not generating delta

Hi Experts,
I am simply clueless bt where I went wrong.Please have a look and explain.
I first created a z table in r\3 with one field as timestamp.
Then I created a delta enabled datasource for this table, in the delta enabled field I selected Timestamp.
Safety interval left blank.
Delta was chosen as "ADDITIVE DELTA".
After that I saved my data source and replicated the same in BI server.
Then I created an Infopackage to initialize the delta and then one more infopackege was created as delta .
Initialization was successfull.
Now I triggered the delta infopackage to bring delta to PSA
BUT
it does not bring the delta ,rather each time it brings in ALL records to PSA . This is the problem m facing .
PLEASE EXPLAIN ME IF YOU CAUGHT ANY MISTAKE IN THE ABOVE FOLLOWED STEPS.
waiting for reply
Manish Sharma

Hi Teja,
Thanks for your reply, I checked the same .
The initstate field has the value 'X'.
I checked in RSA3 but upon test extraction it says 0 records selected.
Pls investigate more on this.
Manish

Delta DATA SOURCE not at all visible in RSA7

hi ,i have installed ecc6 and bi on two different servers ,and the connection is also established ,but coming to ecc,i have activated the data source which is generic data source,and i have initiated delta and generic delta is successfully created but the problem is the data source is not showing in RSA7,i have tried in so many ways like i have tried for logistic data also but,RSA7 not showing any data sources,from my side i am able to initiate delta successfully ,,but RSA7 IN ecc not working,no data source is listed in RSA7,,,please help me ,any settings i need to do in RSA7 to visible data source in RSA7.,,,,,please help me
Moderator message: not directly related to ABAP development.
Edited by: Thomas Zloch on Nov 22, 2011 10:16 AM

try running an ethernet cable from your Mac to the AX. this should enable AU to see it.
once configured, you can disconnect the ethernet cable.
JGG

Delta load for a data source not enabled

Dear Experts,
We have got the requirement to create reports on shipment details.
Based on the requirement we have identified the
Infosouce/ Data source : 0OI_TD_OIGSII
Info Cube: 0OI_TDC01. we think this cube will satisfy the requiremnt.
But the problem is the data source is not delta enabled. so how do we extract the data and how to capture the delta.
when we checked in Roosource table the delta field is blank (Delta only with Full Upload (ODS or InfoPackage Selection))
These data sources are IS OIL specific, so dont know the data extraction procedure.
Please through some light and help me.
Please advise.
Regards
venu

Delete duplicate request is a process chain variant, which will allow you to set the duplicate request deletion options. You need to explore those options.
Now say you have a routine in the DTPs.
DTP1 = Current Month
DTP2 = Prevoius Month
In the month of July,
DTP1 = 07/2009
DTP2 = 06/2009
On daily basis DTP1 will load data for July and DTP2 will load data for June. Now delete duplicate request will delete the previous requests loaded by each of them for the same month. Meaning delete duplicate request for DTP1, will delete the request loaded for 07/2009 and DTP2 will delete the duplicate request for 06/2009.
Now when you will be in Aug, the routine will change the selection criteria
DTP1 = 08/2009
DTP2 = 07/2009, so now DTP2 will delete teh duplicate request for 07/2009 and load the new data. Now the data changed for 06/2009 is not possible to load as you have only 2 DTPs.
For safer side, you can create 3 DTPs to take care of the last 3 months, but first test the logic for two DTPs and then go further for the third DTP.
- Danny

Data source 0BBP_TD_SC_APPR_1 - delta update in SRM

Hello,
I use 0BBP_TD_SC_APPR_1 data source. I have made the delta initialisation with the data transfer into the ODS. Worked fine: data is in and the delta is initialised.
The problem is, that the delta queue is never updated in the SRM (RSA7).
Do you know how this works? Is there an additional report (as RMBW* in R/3 LIS)? Or are there any restrictions for the workflow?
Any help is welcome.
Best regards,
Michal

A 'higher-level' datasource 0BBP_TD_SC_1 was not active.

Generic data source. Delta based on the changes in the CDHDR & CDPOS

Hello all,
I need to create a generic data source using fun module. This fun module has to execute delta based on changes in table CDHDR & CDPOS for purchase order info records.
can I use RSAX_BIW_GET_DTA_SIMPLE?
Is there any other way to implement this requirement?
waiting for ur suggestions ...........
Thanks,
zak.

hi
check the below extractor... it will extract status from both table.. u may not be required to build a generic one..
0TE_OBJ_STATUS_HIST

Data Federator data source not available causes Universe Connection error

I created a Data Federator project that connects to 20 servers across US and Canada. All data sources are SQL Server 2005. The DF project maps 40 source objects into 4 target objects. I created a universe based on the DF project and we have been quite pleased with Webi query response. Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed). We do not want the universe connection to error when one source server is not available u2013 is that possible?
If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

Hi Chapman,
Can you be little elobrate on what you have done to solve the issue.
Thanks,
Dayanand

Newly added field in the data Source not getting populated

Hello All,
We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
Please let mw know how to get the newly added field selected in the system generated query of the infoset.
Regards,
-Purnima

Hi,
As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
I hope it will help.
THanks,
S

Report using excel sheet as data source not working when deployed to production.

I have a set of SSRS reports that use an excel sheet as a datasource.
Now when I preview the reports or run them in the Visual Studio IDE on my local machine i.e
the development machine, the reports run fine & display all correct results.
However, when we deploy the reports to the Production machine which is on a separate server,
the following error message is displayed :
"The current action cannot be completed. The user data source credentials do not meet the requirements to run this report. Either the user data source credentials are not stored in the report server database, or the user data source is configured not to
require credentials but the unattended execution account is not specified. (rsInvalidDataSourceCredentialSetting)"
I've copy pasted the connection string used for connecting to the excel file as reference :
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=C:\MyFolder\CurrentFile.xlsx;Extended Properties="Excel 12.0;HDR=Yes;";
The excel file has also been uploaded to the machine housing the reporting server (i.e to C:\MyFolder location)

Hi Aaakar,
From the error message, please try to change the setting of Credential type for the data source on report manager as follows:
Go to the Data Sources properties page.
For the Connect Using option, select Credentials stored securely in the report server.
In User Name and Password, type credentials that can be used to access the database. If you are using SQL Server as the data source, the user name must be valid for both logging on to the server and for accessing the database that contains the data for
the report.
If the user name and password are credentials for a Windows account, select Use as Windows Credentials.
If you want the report server to pass the credentials of the user accessing the report to the server hosting the external data source, click Windows Integrated Security. In this case, the user is not prompted to type a user name or password.
For more details about Configure Data Source Properties, please see:
http://technet.microsoft.com/en-us/library/ms155882.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

ODBC Data Source Not Available

Completed installation of Oracle Business Intelligence Enterprise Edition, when attempting to configure data source, Oracle in OraClient 10g home 2 is not an available driver, attempting to connect to an Oracle Database, can connect correctly PL SQL? Oracle BI Server is shown?

I am not sure i understand your question. Do you have Oracle Client Installed? This is required for connecting to an Oracle Database. If you have some issues with OCI try connecting using ODBC. If the ODBC works then OCI should also work. I believe there might some conflict of your Oracle homes.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Data Source not visible in Data Source Tree in 7.0 System

Hi Experts
I have a CO_PA Data-Source that I have brought into our Development System from an other R/3 System via RSDS and that all worked fine. Trying to get it into the System via "Replicate Data Source" of the Source System didn't work even do the System showed me in the System_line on the bottom, that it was saving Data-Source etc, while replicating.
The thing is now, that even do I managed to activate my Data Source via RSDS, build a Transformation, and fetcht the Data out of the Source System into PSA, my Data-Source-Tree just show's me a Top-Node called "NEW_HIER_ROOT" for this Source-System but not my Data-Source underneath !!
Can anybody help me on this behaviour of the Data Source Tree ?
Thank you
Armin

Worked perfect
Thank you very much Simon !
Best regards
Armin
Edited by: Armin Baggenstos on Feb 25, 2010 1:23 PM

Data source not delta capable

Similar Messages

Maybe you are looking for