Data Source path in Pivot Table changes to absolute on its own

Hello.
I have a .XLSX file, that was created long time ago (I don't even know in which Office version, but definitely not 2013), and maybe even was a .XLS file at first.
So it's a 4 MB file with 16 Sheets and 8 Pivot Tables.
All of the Pivot Tables use other sheets from the same file as Data Source.
Data Source for some of them look like this: 'Sheet3'!$A:$E
Everything is fine when I save the file, and open it from saved file.
But as soon as I try to move the file elsewhere, or rename it, or email it - all Data Source paths change to something like this: '\Users\Sergii_Litnevskyi\Desktop\New folder\[FileName.xlsx]Sheet3'!$A:$E
And it happens with all Pivot Tables. The problem is that it links to an old file path, where the file does not exist anymore. And it links to an external file, which is not what I want.
If I Save As and select different path and filename - then it works fine. So it's a workaround for renaming and moving files, but not for sending them to other persons.
I've read some threads, and people recommend disabling "Save external link values", but it does not help. It is already turned off in my office, but it keeps acting weird.
So what I need is: Save the file, close it, rename it, move it to other place, send it over email as attachment. And then I want to have the same Data Source path in my PivotTables as I had before I saved the file. How can I do it?
My Office version: Microsoft Excel 2013 (15.0.4454.1503) MSO (15.0.4517.1005) 32-bit

Hi,
According to your description, I suppose the issue may be caused by some reason.
Do you link the outside data source?
I think if the file moves the file elsewhere, or renames, or email,
data source paths can’t be change.
But, your data source paths add the absolute path.
Do you link the outside data source?
I recommend you zip the file and send it as Email attachment.
If the issue exists, you may save as it in a new name and test it in another computer.
Regards,
George Zhao
TechNet Community Support
I am pretty sure that I don't have any external links in the document.
However, even if I did - why would it change Data Source path for all of the Pivot Tables, when I did not request it?
I tried zipping it and sending to other person over email, but he got the file with changed data source paths.
I can even record a short video to show what happens.
Actually, I just did it. You can see the video here: http://screencast.com/t/qMBild3ck9b
It is rather big - 23.8 MB.
Let me explain what I showed there:
I opened my original file. I showed that there are Pivot Tables, whose Data Sources are in the same file, on various other sheets.
I showed this for all of the Pivot Tables in the document.
I saved the file using Save As in a different folder and under a different name (TEST.xlsx).
I then opened that saved file to show you that it is fine, and the Data Source path for one of the Pivot Tables is the same as it was in original file. It is the same for all of the other Pivot Tables.
Then I closed, and simply renamed the file to TEST123.xlsx.
Opened it, and first thing wrong - Security warning.
Then I got ‘Cannot open PivotTable source file ….’ messages. And, as I showed, now all Data Source paths have been changed to full paths of the file, that was created by Save As (TEST.xlsx) from original file.

Similar Messages

Dynamic data source in Excel Pivot Table

Hello there,
I am trying to have dynamic data source in pivot table using INDIRECT but getting the error "Reference not valid". Here is how I setup the reference:
Named range: ConsolLink = "'R:\Root\Sub1\Sub2\Consol File.xlsm'!Source_OpexConsol"
"Source_OpexConsol" is defined in the source file as a dynamic name using offset formula.
In the pivot data source, I have tried "=INDIRECT(ConsolLink)" as the data source but that does not work.
I have also tried using INDIRECT in ConsolLink and just referencing "ConsolLink" as the data source. That does not work either.
I am not using Power Pivot. Appreciate it if someone can help.
Thanks.

If it is open, then try
Named range: ConsolLink = Range("Consol File.xlsm'!Source_OpexConsol")
And if it is not currently open, then try
Dim W As Workbook
Set W = Workbooks.Open("R:\Root\Sub1\Sub2\Consol
File.xlsm")
Named range: ConsolLink =
Range("Consol File.xlsm'!Source_OpexConsol")
W.Close False

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

Using external parameters within MS Query returning that data right into a pivot table Excel 2010

In Excel 2010 i was able to use the external parameters within MS Query returning that data right into a pivot table. But the parameter on the worksheet will not save in the paremeter setting of the data connection. And if you save it and open
it and try to refresh the pivot table Excel stops responding and you have to force the file closed. I found out the reason to crash is that it did not keep the parameter saved.
Can this be fixed?

Hi,
Just
checking in to see if the information of Oskar was helpful. Please
let us know if you would like further assistance.
Jaynet Zhang
TechNet Community Support

Crystal ActiveX Runtime Lib: Change text data source path at run time.

We have some PCs running Crystal Reports 10 and some running CR 9 and 8.5. For each PC, we set up a System DSN ODBC data source (in Control Panel - Administrative Tools) for pulling data from text files to
generate reports.
Recently we wrote some routines (see the Visual Basic example at the
end of this message) to change the path of the data files at runtime.
According to the Crystal Reports Technical Reference Guide, we may use
the method LogOnServer() of an Application object or an DatabaseTable
object. However, we find that this does not work: the PrintOut()
method only pulls data from the default path as configured for the
System DSN, not from the path passed as the third parameter of
LogOnServer(). It does not return any error message.
We have also tried to use SetTableLocation() method, and it still does
not work.
Would any experts examine our code below and advise what we are missing? Thanks.
For the following VB example, we have:
System DSN Name: AP_WORKSHEET
Driver: Microsoft Text Driver
Database Directory: D:\0ood2 (i.e. the default path)
Crystal Report Document: D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt
(Which specifies that the data source text file name is BlockWS.txt)
Purpose : We would like to read the data source text file from
D:\0ood1 instead of the default path.
Following is the code of the VB macro:
Sub test()
Rem In this version of the subroutine, we call
Rem DatabaseTable.LogOnServer() and "Rem"ed out
Rem Application.LogOnServer() and SetTableLocation().
Rem We have un"Rem"ed each of them and "Rem"ed others and try to run.
Rem In all runs, data are pulled from the default file
Rem D:\0ood2\BlockWS.txt instead of D:\0ood1\BlockWE.txt.
Dim crxapp As CRAXDRT.Application
Dim crxRep As CRAXDRT.Report
Dim crxDB As CRAXDRT.Database
Dim crxTab As CRAXDRT.DatabaseTable
Dim crxConnPs As CRAXDRT.ConnectionProperties
Dim crxConnP As CRAXDRT.ConnectionProperty
Dim apropSubLoc As String
Dim apropConnBufStr As String
Set crxapp = CreateObject("CrystalRuntime.Application")
Rem
crxapp.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Set crxRep = crxapp.OpenReport
("D:\3g\run\Vision\apcyto\Reports\crBlockWS.rpt")
Set crxDB = crxRep.Database
Set crxTab = crxRep.Database.Tables(1)
apropConnBufStr = crxTab.ConnectBufferString
apropSubLoc = crxTab.SubLocation
crxDB.LogOnServer "p2sodbc.dll", "AP_WORKSHEET", "<CRWDC>DBQ=D:\0ood1",
Rem crxTab.SetTableLocation "D:\0ood1\BlockWS.txt", apropSubLoc, "DSN="
Rem Set crxConnPs = crxTab.ConnectionProperties
Rem Set crxConnP = crxConnPs.Item("DSN")
Rem crxConnP.Value = "AP_WORKSHEET"
Rem Set crxConnP = crxConnPs.Item("Database")
Rem crxConnP.Value = "D:\0ood1\BlockWS.txt"
Rem crxTab.Location = "BlockWS.txt"
crxRep.DiscardSavedData
crxRep.PrinterSetup (0)
crxRep.PrintOut
End Sub
For VB macros, the problem exists in all of CR 8.5, 9 and 10. However,
for another platform we are using, Unify Vision 4GL, it works for CR
8.5 while not working for CR 9 and 10.
Following is the source code in Unify Vision 4GL. This language may
not be popular, but I thin you are about to see how it calls the
Runtime Library methods LogOnServer(), OpenReport(), PrinterSetup() and
PrintOut().
%gfPrintCrystalReport
BOOL FUNCTION gfPrintCrystalReport($reportName)
BEGIN
if NOTMKNOWN(GF:$oSeagateId) then
create service of activex
class 'CrystalRuntime.Application'
object_ref into GF:$oSeagateId;
if MKNOWN(GF:$oSeagateId) then
begin
/* TD23013: Database directories are dynamic to
accommodate multiple user requirement of Citrix */
send message LogOnServer to GF:$oSeagateId
using
( 'PDSODBC.DLL', 'AP_WORKSHEET', '<CRWDC>DBQ='+GF:$WinTempDir,'','')
identified by $msgHandle;
if $msgHandle:MSG_STATE 'RESPONSE_PROCESSED'
then
begin
display 'Crystal Reports cannot connect
to the datasource ' for fyi_message wait;
return (FALSE)
end
send message OpenReport to GF:$oSeagateId using
($reportName, 1)
identified by $msgHandle returning
$oCrystalReport
if MKNOWN($oCrystalReport) then
begin
if (NOTMKNOWN(GF:$printerName)) then
set GF:$printerName to
$oCrystalReport->PrinterName;
if GF:$printerName $oCrystalReport-
PrinterName then
send message SelectPrinter to
$oCrystalReport
using
(GF:$driverName,GF:$printerName,GF:$portName)
identified by $msgHandle;
set $oCrystalReport-
DisplayProgressDialog to FALSE;
while TRUE
begin
DISPLAY NOTICE 'Print to : ' +
GF:$printerName
LABELS 'Ok'
DEFAULT, 'Cancel', 'Printer Setup'
RESULT INTO $userOption
switch ($userOption)
begin
case 0 :
send
message PrintOut to $oCrystalReport
using
(PROMPT_USER, NUMBER_OF_COPIES, COLLATED, START_PAGE, STOP_PAGE)
identified by $msgHandle;
set
$oCrystalReport to UNDEFINED
return
(TRUE);
case 1:
set
$oCrystalReport to UNDEFINED
return
(FALSE);
case 2:
send
message PrinterSetup to $oCrystalReport
using
(0)
identified by $msgHandle;
if
GF:$printerName $oCrystalReport->PrinterName then
begin
set GF:$printerName to $oCrystalReport->PrinterName;
set GF:$driverName to $oCrystalReport->DriverName;
set GF:$portName to $oCrystalReport->PortName;
end
break;
end
end
end
end
return
(FALSE);
END

Hi Sydney,
If you search the Developers help file you'll find info on using the method:
How to change the data source
This example demonstrates how to change the data source from native Access to an OLEDB (ADO) data source by using the ConnectionProperty Object, as well as how to change the table name by using the Location property of the DatabaseTable Object. CrystalReport1 is connected to the xtreme.mdb database found in the \Program Files\Crystal Decisions\Crystal Reports 10\Samples\En\Databases folder. The report is using the Customer table. A copy of the Customer table is added to the pubs database on Microsoft SQL Server.
' Create a new instance of the report.
Dim Report As New CrystalReport1
Private Sub Form_Load()
' Declare a ConnectionProperties collection.
Dim CPProperties As CRAXDRT.ConnectionProperties
' Declare a DatabaseTable object.
Dim DBTable As CRAXDRT.DatabaseTable
' Get the first table in the report.
Set DBTable = Report.Database.Tables(1)
' Get the collection of connection properties.
Set CPProperties = DBTable.ConnectionProperties
' Change the database DLL used by the report from
' native Access (crdb_dao.dll) to ADO/OLEDB (crdb_ado.dll).
DBTable.DllName = "crdb_ado.dll"
' The connection property bags contain the name and value
' pairs for the native Access DLL (crdb_dao.dll). So we need
' to clear them, and then add the name and value pairs that
' are required to connect to the OLEDB data source.
' Clear all the ConnectioProperty objects from the collection.
CPProperties.DeleteAll
' Add the name value pair for the provider.
CPProperties.Add "Provider", "SQLOLEDB"
' Add the name value pair for the data source (server).
CPProperties.Add "Data Source", "ServerA"
' Add the name value pair for the database.
CPProperties.Add "Initial Catalog", "pubs"
' Add the name value pair for the user name.
CPProperties.Add "User ID", "UserName"
' Add the name value pair for the password.
CPProperties.Add "Password", "password"
' Set the table name. ' for SQL types it would be "database.dbo.table"
DBTable.Location = "Customer"
Screen.MousePointer = vbHourglass
' Set the report source of the viewer and view the report.
CRViewer1.ReportSource = Report
CRViewer1.ViewReport
Screen.MousePointer = vbDefault
End Sub

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

Multiple Data Sources In One Logical Table

I am new to OBIEE and I have came accross an issue. I appologize if this information is in the forum somewhere but I have searched and cannot find it.
My situation is that I would like to have one logical table that contains multiple data sources which have all the same columns. I already have session variables setup to differentiate the user's security through a row-wise variable for a specific column and a session variable for another column which determines the user's association to the data source in which they belong to. This security works well when the data sources are seperated in the Business Model and Mapping portion but the issue that arises is that the user's cannot share reports when the data sources are seperated in the BM&M.
I have dragged and dropped a table from the Physical model to the BM&M, I then dragged the second data source (with same meta data structure) over to the "Sources" folder in the first data source table in the BM&M. On the Content tab or each data source table I have defined the WHERE clause as such, where VALUEOF(NQ_SESSION."SCHOOL") session variable is my row-wise column filter and the VALUEOF(NQ_SESSION."GROUP") filter is my data source determinative:
sandbox."".SANDBOX.OBIEE_CROSS_ENROLLMENTS.HOME_SCHOOL = VALUEOF(NQ_SESSION."SCHOOL") AND sandbox."".SANDBOX.OBIEE_CROSS_ENROLLMENTS.DATA_SOURCE = VALUEOF(NQ_SESSION."GROUP")
Unfortunatley this only returns values in the BI Answers for the first drag and drop Pysical table in the BM&M layer and not the second Physical table drug into the "Sources" folder. I have also tried to create a new logical table and drag both tables into the "Sources" folder to no avail. I have experimented with the Fragmentation content on the "Content" tab of the seperate logical tables, checking the "This source should be combined with other sources at this level", which gives me an error in BI Answers that a column does not exist which really does.
What could I be missing? Advanced thanks to those who reply.
Thank you,
Kyle

Stijn,
Thank you for the article link. That was very helpful! It seems that I had a few things off as you do need the "This source should be combined with other sources at this level." checked. In my two table source columns for DATA_SOURCE I defined a literal ('086496' and '085597' for the other) in the Column Mapping tab. I pasted the following in the Fragmentation content, checking the "This source..." box on the Content tab:
eSIS.SANDBOX4_SCHOOLS.DATA_SOURCE = '086496'
And pasted the following into the WHERE clause, checking "Select distinct values" on the Content tab:
sandbox4."".OBIEE.NWOCA_SCHOOLS.SCHOOL_CODE = VALUEOF(NQ_SESSION."SCHOOL") AND sandbox4."".OBIEE.NWOCA_SCHOOLS.DATA_SOURCE = VALUEOF(NQ_SESSION."GROUP")
This took care of my user's security, utilizing the session variables in the WHERE clause. I am now able to generate reports that only one user can access from one data source and share that same report with another user who can only see data from the other data source.
Many thanks!!!

I want to fill the data source 0CO_OM_WBS_3 from COSP table.

Hi,
I am working on Plan and actual for cost controlling, I need to fill the data source with data from COSP table.
Please give me the steps for this. I checked in RSA3 for data source it don't have any data, but the corresponding table COSP having data.a
Thanks
Durg

Hi,
See the following DataSources for requirements,
0CO_OM_WBS_1                      WBS elements: Costs
0CO_OM_WBS_2                      WBS elements: Budget
0CO_OM_WBS_3                      WBS elements: Overall plan
0CO_OM_WBS_4                      WBS elements: Statistical key figures
0CO_OM_WBS_5                      WBS Elements: Selections
0CO_OM_WBS_6                      WBS Elements: Actual Costs Using Delta Extraction
0CO_OM_WBS_7                      WBS Elements: Commitment Line Items
0CO_OM_WBS_8                      WBS Elements: Budget Line Items
Use 0CO_OM_WBS_6 for Actual , bcoz it is having Delta Option for Plan you can go 0CO_OM_WBS_2 or 0CO_OM_WBS_3. See the SAP Help on that.
http://help.sap.com/saphelp_nw04/helpdata/EN/08/47c6f8bc1db04a84c9185954208ee7/frameset.htm
In this help you can find complete details of the Tables, you can see help for all above DataSources.
Thanks
Reddy

Help needed: Data source for Facilities management (tables VTB_ASGN*)?

Hi all,
I am looking for a data source for facilities management in R/3 (PI 2004_1_470)
The tables are concerning VTB_ASGN* etc.
every feedback is highly appreciated and rewarded.
Thanks and regards,
Sally

Hello Sally,
Did you ever find a solution to this issue?
My client is also looking to do reporting on facilities in BW and integrate this data into liquidity planning in SEM-BPS. However, it looks like this will have to be a custom extractor calling one of the two function modules either FTR_FC_GET_COMMITMENT or FTR_FC_GET_COMM_DRAW_FEE.
Gregory

Sorting data by clicking on pivot table header in excel

Hi,
Do you have an elegant idea how to sort pivot table data, based on power pivot model,
by clicking on header (not by using the arrow on the first one).
I'm Using Excel 2013
Thank you in advance!
Dina

You could implement a solution using slicers:
http://www.powerpivotpro.com/2011/10/user-friendly-report-sorting-with-slicers/

Macbook pro changes user picture on its own . Help please.

Does this mean I have some sort of malware?
Reccently my mac started changing my user photo on its own. Even more strangely the photos are only from photobooth.

You likely have a corrupt cache file someplace in OS X.
12: OnyX cache cleaning
This routine cleans all possible corrupt caches, doesn't delete your data or programs.
Apple doesn't include a easy for the user, system wide cache cleaning process in OS X, something they need to consider implementing.
So we have to depend upon third party software to do this and the best, time tested and free one is OnyX
Sometimes a corrupted cache file can cause strange behavior, slow machine, Dock and fonts doesn't work, beachballs effect, something won't install, Safari acting up etc., just general strangeness that can't be explained. Web browsing slow when all the other machines are fast etc.,
Use the free OnyX matching your OS X version and run all the initial checks
Run all the maintenance and cleaning aspects (except don't delete the log files) and reboot at the end (must)
If any of the initial checks OnyX does gives a warning, then Stop and report, you have a serious drive or other issue.
This will give OS X a enema of sorts (won't delete file or programs) and let it rebuild all the cache and other files, including Spotlight.
You must be through running all the maintenance and cleaning aspects as this is a "catch all" method and any number of corrupted caches may be responsible for your issues. Don't worry, OS X will work fine (and likely faster again) after the caches are cleaned out and rebuilt from their original sources provided you REBOOT when finished using OnyX.
http://www.macupdate.com/app/mac/11582/onyx https://en.wikipedia.org/wiki/OnyX
List of proven OnyX successes:
https://discussions.apple.com/message/18377471?ac_cid=sa123456#18377471
OnyX also has a Verify > Preferences
(plist) file checker, show the corrupt ones and write them down. So while your in OnyX cleaning your caches, check for corrupted plist files too for the next step below.
Step by Step to fix your Mac

Itunes changes genre information on its own

Often I find that when I begin playing a song, iTunes will change (or have changed prior to launch) the information that I have already stored for that song. i.e., if I double click a song to play it, iTunes will change the genre to something else on its own, and then I have to go and change it again to what I wanted it to be. Is there a way to turn this off, or prevent it from happening? It's really causing me headaches.

I literally just noticed this. Played a song out of music and was like "***!" as I watched it immediately change the genre. Opened info and changed it back. Dbl-clicked to play it and watch it change AGAIN.
One artist, with 9 albums, all bought in iTMS. ALL exhibit the same behavior. Just bought their latest album VIA AMAZON, did everything I usually do after buying an album - select full album, open info and change everything to what my smart playlists expect. Closed. NONE of the songs change genre on play.
So, this issue only appears to be w/ songs purchased from the iTMS. I did seem to figure out how to stop this at least. Instead of changing the genre in the info dialog, change it FOR EACH INDIVIDUAL SONG in the music list by editing the genre cell for that song. ROYAL PITA but it seems to stick at least for now.
Since I usually buy an album, edit for smart playlists and then listen via playlists, I can only imagine HOW MANY OF MY SONGS I'VE GONE TO THE EFFORT TO TAG THAT HAVE BEEN CHANGED WITHOUT MY KNOWING. WHAT IS THIS!?!?! WINDOWS?!?!? IF YOU'RE GOING TO DO THAT, DON'T LET US WASTE OUR TIME EDITING FIELDS!!!!
So. Anyway. Hope that helps you out Bri Guy. I now have to track down all songs from the last 5 years apparently and manually fix each one by hand.
Needless to say I will NEVER buy any music from the iTMS again.

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

Switch data sources for only 1 table?

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA

Greetings. In AS 2012 Tabular, I see that I have 3 existing connections. One connection is used as the source for most of the tables, but the other two connections are the source for one table each. I'd like to change the source for those two other
tables to use the main data connection, but can't figure out how?
My logical guess would be in the table properties, but that's not it.
Any ideas?
TIA, ChrisRDBA
Hello,
If your three data connections from different database, I don't think we can combine three data connections into one in Tabular model design surface. If you need to only use one data connection for your Tabular model, please try to combine your underlying
tables into one database.
Please point out if I have something misunderstood.
Regards,
Elvis Long
TechNet Community Support
Thanks Elvis. As stated above, all tables reside in one DB.
TIA, ChrisRDBA

Data Source path in Pivot Table changes to absolute on its own

Similar Messages

Maybe you are looking for