Data stuck-up in ALE inbox

Hi guys,
The data idoc has arrived for the hierarchy but not available in infobject, infact the update mode is ale inbox and infoobject, is there a way to push the data from ale
to the infoobject hierarchy from R/3.
Thanks,
Your help is greatly appreciated

Hi,
Go to Monitor> Select your request, Go to Environment Menu> Select ALE inbox--> Go to BW and check do you have any IDOCS stuck here and select them and Execute them Manually.
If they Stuck in R/3 then
Go to Monitor> Select your request, Go to Environment Menu> Select ALE inbox--> Go to Source System and check do you have any IDOCS stuck here and select them and Execute them Manually.
regards,
rik

Similar Messages

Data struck up in ALE inbox

Hi,
While tried to load Masterdata from ECC, Data struck-up in ALE inbox E1RSSH -> E1RSHIE and it is popping up with a error in process monitoring that 21,35 and 65 node id's are missing. PLease help me out with process of eliminating those records and load the data into Info object.

Hi,
Is the job in source system still active. Job name BI_reqnumber
Also check SM66 in both BW and source system. If you are loading hierarchy it generally takse time to load it.
Regards,
Pravin
Edited by: Pravin Karkhanis on May 28, 2010 3:19 AM

Data Load - ALE inbox of SAP BW is identical to ALE outbox of the SS

Hello,
I am doing a init for a cube, and the load is still running without ending.
no errors given but when I look at the step by stpe analysis it gives the following message.
Diagnosis
    No errors could be found. The current process has probably not finished
    yet.
System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source
    system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
Thanks,
VJ

Hi Vijay,
The message you are seeing is a standard message that is shown while the data load is in running state in the monitor.
Periodically refresh the monitor screen and check whether records are getting extracted.Example if records getting extracted really slow,you will see the figure 'XYZ(records) from XYZ' slowly increasing.
Also keep checking detail tab to see if steps are slowly turning GREEN or not.
If load still stuck in yellow,maybe u need to re-run it and look into performance tuning options.
cheers,
Vishvesh

ALE inbox of BI is identical to the ALE outbox of the source system

Hi experts
We have BW 7 on ERP (ECC) 6. We have BW and ERP TOGETHER on the same developing system. BW is designed on developing client 100 (it is future productive client on the future productive system). It is of course default "myBI" source system. Upload is correct.
But because data is only inside clinet 200 (in the same system) I must create SAP source system client 200. It is correct, RFC destination is corect, source system clnt200 is correct and active. But data I cannot upload from this source system clnt200 - IDOCs are not correct, BW monitor is yellow and message:
ALE inbox of BI is identical to the ALE outbox of the source system
Is mistake in situation "the same system - various clients and sourcesystems"? Do you have any experiences with BW on the same system with ERP 6 and client enviroment?
Thanks
Ales

Hi Ales,
The problem can often be caused due to missing authorizations with the background user used to receive the data in BW or
the background user in the source system that sends the data to BW. Please check the authorizations as per the note
150315 , sometimes SAP_ALL profile does not have the required authorizations so please check that the background users
have the profiles mentioned in the note 150315:
As per the note:
Reason and Prerequisites
a) In the BW there exist two user:
   i) a human administrator, using S_RS_ALL
   ii) a user called BWREMOTE (or similar), used to receive the data
       from the OLTP, using S_BI-WHM_RFC
b) In the OLTP there exist also two user:
   i) a human administrator, needing authorizations to create users
       and RFC-destinations.
   ii) a user called ALEREMOTE (or similar), used to ...
       1) ... connect the OLTP to the BW
       2) ... extract the data
       3) ... send the data to the BW
       4) ... show monitoring dialogs
       for tasks 1 to 4, the profile S_BI-WX_RFC is used (however does
       not suffice on some points since some authorizations are
       missing in the delivered profile)
       5) ... make customizing of OLTP extractors
       for this, additionally the authorizations to execute
       IMG-functionality, to execute Transaction SBIW and
       to maintain the applications, which shall be customized, must
       be given during the customizing functionality is used.
I hope that this helps.
Regards,
Des.

Reading ALE inbox

Hai,
          How can i read ALE INBOX?
I have the following in error messages after mydata load failed.
Diagnosis
     The information available is not sufficient for analysis. You must
     determine whether further IDocs exist in SAP BW that have not yet been processed, and could deliver additional information.
Further analysis:
     Check the SAP BW ALE inbox. You can check the IDocs using the Wizard or
     the "All IDocs" tabstrip.                                                   Thanks a lot.

hi Visu,
I think you just have to check Idocs sent for this request to your BW system
your infopackage -> monitoring -> failed request -> IDocs List in the warehouse (F9) -> set selection criteria e.g. timeframes of your request -> execute and you see a list of IDocs with information about data transfer
Regards,
Andrzej
ps. alternatively Eassy Access menu -> tools -> ALE and find info there

Data Management Guide and ALE Monitoring Guide

Hi All,
I'm looking for two SAP documents (pdf) that have been available in the past.
Data Management Guide and ALE Monitoring Guide.
Have scoured the net and sap.service.com, but can't find them anywhere.
Does anyone know where the latest versions live?
Thanks,
Chris

they are still available:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000695478&
Systems Operation
-> Monitoring
-> setting up your monitoring
They are also available in solution manger.

HT2513 importing ical data stuck- how do I stop it?

importing ical data stuck- how do I stop it?

Greetings,
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps.

Why doesn't Thuderbird IMAP my BT account in the inbox? It maps sent items and draft, but gets stuck 'thinking' about the inbox.

I have just migrated to a new laptop and have set up Thunderbird with various work and personal accounts. All the gmail accounts work fine, but the I am experiencing some problems with my btinternet account.
1. When it sends an email if gets stuck at the end of sending and when I cancel it it says that the email could not be saved to the sent folder. Yet when I look at the sent folder it is there and when I check people have received what has been sent.
2. When I click on the inbox folder it starts thinking, but will not show any of the emails that are in the BT email inbox.
I have set up all the accounts I'm asking Thuderbird to manage as IMAP accounts.
Any help i sorting this would be gratefully received :-)

https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

Date stuck in preferences

The date is stuck in the time/date section of my preferences folder on 5/5/08. I can change the month & the year, but the date of the 5th will not change. The real confusion is that it appears correctly in the time/date window at the right top of my desktop screen. It's causing some issues with my .mac syncing from one computer to another. Any ideas on how to change it?

OK, I logged in under another name, time/date worked perfectly. Went back in under my name, removed plist file you suggested & put on desktop, could not change time & date again. Do I need to trash it? Thought I'd ask before I loose something important. Thanks for the help.

Transferring Data across servers through ALE

Hi, I want to send only some fields data of certain infotypes from HR server to FICO server through ALE. Please guide me thorugh the steps to do it.
Regards,
Vipul

In your distribution model (which determines which system will send what kind of data to what system) you can state that your receiving system is the same as your sending system. i.e. data will be send to the same client.
Only problem:
the idoc will send exactly the same data, so you need to replace the company code with the target company code.
This means that you need to change the abap code that is used to send idocs (outbound) or to process inbound idocs and addd a new mapping to it.

Procedure for transfer data between clients using ALE

Hi all ,
I am new to this concept .
I want to transfer the material master data from quality client (200) to Development Client(100) using ALE and IDOC, how to do ?
What would be the procedure ? plz let them explain step by step of definition along with screenshot / process ....
Regards
Deepa.

T.Code: BD54
Step 1:create a logical system qaout in quality system
Step 2:create a logical system devin in quality system
Step 3:create a logical system qaout in development system
Step 4:create a logical system devin in development system
T.Code: SCC4
Step 5:Assign qaout to 200 client in quality system
Step 6:Assign qaout to 100 client in development system
T.Code: SM59
Step 7: Create R/3 type (or ABAP type in ECC)RFC destination RFCDEV in quality system
T.Code: WE21
Step 8: create Port with above rfc reference in quality system
T.Code:BD64
Step 9:Create distribution Model (use matmas message type) in quality system
then Environment ->Generate Partner profiles
Then Edit ->modelview -> distribute
T.Code: BD10
Step 10: select the material for distribution in Quality System.

Date stuck on July22. What can I do?

My date is stuck on July 22 and I cannot figure out how to reset it. The time sets itself fine, but the date is stuck.

Is it possible you hardcoded in the date when you created a custom date display format?
To check this open System Preferences->Language & Text and select Region from the tabs.
Now look at the Dates format box. Select customize the box should look something like this
If July 22 is in there as plain text (not in a blue field) that date is hard coded in. Delete it and set th format as you want it.

Customer Master Data via a Bapi/ALE

Hello All. I am new to this forum. I have a couple of questions.
What I am trying to do: I have to interface to SAP with Websphere Message Broker which has inbuilt nodes to interface with SAP using BAPI or ALE to send Customer Master Record (create/update/delete)
The questions I have:
1/ Has anyone done this? What did you use BAPI or ALE?
2/ When a Customer Master IDOC is sent to SAP, if successful, a return code is sent back by SAP. This indicates that SAP has received the IDOC successfully. However, our requirement is that we have to know whether the IDOC was successfully posted within SAP. I am of the opinion that this is manual task within SAP and it should not be the function of the middleware layer as its responsibility is only to successfully deliver the IDOC's. I would welcome opinions on this issue. Please let me know If there is a way to determine if the IDOC has been successfully posted in SAP.
3/ Is there anywhere where I can get an XML representation of the Customer Master Record. I want to see the structure and the available fields. How can I get this info from SAP?
Thank you

Hi,
1/ Has anyone done this? What did you use BAPI or ALE? ->USE ALE.
2>When a Customer Master IDOC is sent to SAP, if successful, a return code is sent back by SAP. This indicates that SAP has received the IDOC successfully. However, our requirement is that we have to know whether the IDOC was successfully posted within SAP. I am of the opinion that this is manual task within SAP and it should not be the function of the middleware layer as its responsibility is only to successfully deliver the IDOC's. I would welcome opinions on this issue. Please let me know If there is a way to determine if the IDOC has been successfully posted in SAP.
Yes u can view the idoc in WE02/WE05 (Idoc monitoring)
3>3/ Is there anywhere where I can get an XML representation of the Customer Master Record. I want to see the structure and the available fields. How can I get this info from SAP?
When u ase IDOC for customer , the basic type is DEBMAS05..Goto WE60, specify the basic type as DEBMAS05(latest) and then u have the all the segments , fields used with doucmentation.
Regards,
Nagaraj

Data stuck in QRFC in client proxy scenario

In client proxy scenario (proxy to file async). I triggered the report porgram from ECC and I the green flag moni in ECC but the mesage is did nto reach PI as it got stuck in qrfc. It reaches PI upon clearing the message from SMQ2. Please help solve this.

this problem persists when queues are not registered or any abapstack workitem gets into error.
select the workitem in smq2. execute it manually. after completing the execution, goto sxmb_adm tcode, there select manage queues. then register queues.

WorkFlow: Work Item getting stuck in requestor's inbox after resubmitting

Hi all,
There is a form which has to get approved for further processing. When the requestor submits it for approval, the workitem goes into the approver's inbox. There are three approvers. When one of the approvers rejects it, it goes back to the requestor's inbox. Now the requestor changes the form and resubmits it again. But now, it won't go from that inbox to the approver's inbox.
Could anyone tell me how to debug this kind of a workflow scenario? What transactions should I be using to find out what's going on here? I'm a bit new to WorkFlow.
Thanks.

Hi Kinna,
What work item is this? Did you check the workflow log/ overview for any errors?
Regards,
Suresh Datti
P.S. You will probably get a bettr response if you psot this question on the Business Process Management (BPM) forum.
Message was edited by: Suresh Datti

Data stuck-up in ALE inbox

Similar Messages

Maybe you are looking for