Reading ALE inbox

Hai,
          How can i read ALE INBOX?
I have the following in error messages after mydata load failed.
Diagnosis
     The information available is not sufficient for analysis. You must
     determine whether further IDocs exist in SAP BW that have not yet been processed, and could deliver additional information.
Further analysis:
     Check the SAP BW ALE inbox. You can check the IDocs using the Wizard or
     the "All IDocs" tabstrip.                                                   Thanks a lot.

hi Visu,
I think you just have to check Idocs sent for this request to your BW system
your infopackage -> monitoring -> failed request -> IDocs List in the warehouse (F9) -> set selection criteria e.g. timeframes of your request -> execute and you see a list of IDocs with information about data transfer
Regards,
Andrzej
ps. alternatively Eassy Access menu -> tools -> ALE and find info there

Similar Messages

ALE inbox of BI is identical to the ALE outbox of the source system

Hi experts
We have BW 7 on ERP (ECC) 6. We have BW and ERP TOGETHER on the same developing system. BW is designed on developing client 100 (it is future productive client on the future productive system). It is of course default "myBI" source system. Upload is correct.
But because data is only inside clinet 200 (in the same system) I must create SAP source system client 200. It is correct, RFC destination is corect, source system clnt200 is correct and active. But data I cannot upload from this source system clnt200 - IDOCs are not correct, BW monitor is yellow and message:
ALE inbox of BI is identical to the ALE outbox of the source system
Is mistake in situation "the same system - various clients and sourcesystems"? Do you have any experiences with BW on the same system with ERP 6 and client enviroment?
Thanks
Ales

Hi Ales,
The problem can often be caused due to missing authorizations with the background user used to receive the data in BW or
the background user in the source system that sends the data to BW. Please check the authorizations as per the note
150315 , sometimes SAP_ALL profile does not have the required authorizations so please check that the background users
have the profiles mentioned in the note 150315:
As per the note:
Reason and Prerequisites
a) In the BW there exist two user:
   i) a human administrator, using S_RS_ALL
   ii) a user called BWREMOTE (or similar), used to receive the data
       from the OLTP, using S_BI-WHM_RFC
b) In the OLTP there exist also two user:
   i) a human administrator, needing authorizations to create users
       and RFC-destinations.
   ii) a user called ALEREMOTE (or similar), used to ...
       1) ... connect the OLTP to the BW
       2) ... extract the data
       3) ... send the data to the BW
       4) ... show monitoring dialogs
       for tasks 1 to 4, the profile S_BI-WX_RFC is used (however does
       not suffice on some points since some authorizations are
       missing in the delivered profile)
       5) ... make customizing of OLTP extractors
       for this, additionally the authorizations to execute
       IMG-functionality, to execute Transaction SBIW and
       to maintain the applications, which shall be customized, must
       be given during the customizing functionality is used.
I hope that this helps.
Regards,
Des.

Is there a way to create a "read only" inbox in mac mail?

I am wondering if there is a way to set up a read only inbox...I would like to receive email from a specific address but block or not have the option to send from that address.

Thanks! I was able to get to the sqlite prompt, but at that prompt I must not be copying/pasting correctly. Here is what I'm getting if you can correct me, perhaps I need to type it in differently? Thanks
Last login: Tue Jun 10 14:04:28 on console
Macintosh-3:~ ryanr$ sqlite3 ~/Library/Application\ Support/AddressBook/MailRecents-v4.abcdmr
SQLite version 3.7.13 2012-07-17 17:46:21
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
sqlite> .mode csv
sqlite> SELECT zfirstnamenormalized, zlastnamenormalized, zemailnormalized FROM zabcdmailrecent;
sqlite>
sqlite> .mode csv SELECT zfirstnamenormalized, zlastnamenormalized, zemailnormalized FROM zabcdmailrecent;
Error: unknown command or invalid arguments: "mode". Enter ".help" for help
sqlite> .mode csv
sqlite> SELECT zfirstnamenormalized, zlastnamenormalized, zemailnormalized FROM zabcdmailrecent;
sqlite>

Data stuck-up in ALE inbox

Hi guys,
The data idoc has arrived for the hierarchy but not available in infobject, infact the update mode is ale inbox and infoobject, is there a way to push the data from ale
to the infoobject hierarchy from R/3.
Thanks,
Your help is greatly appreciated

Hi,
Go to Monitor> Select your request, Go to Environment Menu> Select ALE inbox--> Go to BW and check do you have any IDOCS stuck here and select them and Execute them Manually.
If they Stuck in R/3 then
Go to Monitor> Select your request, Go to Environment Menu> Select ALE inbox--> Go to Source System and check do you have any IDOCS stuck here and select them and Execute them Manually.
regards,
rik

Data struck up in ALE inbox

Hi,
While tried to load Masterdata from ECC, Data struck-up in ALE inbox E1RSSH -> E1RSHIE and it is popping up with a error in process monitoring that 21,35 and 65 node id's are missing. PLease help me out with process of eliminating those records and load the data into Info object.

Hi,
Is the job in source system still active. Job name BI_reqnumber
Also check SM66 in both BW and source system. If you are loading hierarchy it generally takse time to load it.
Regards,
Pravin
Edited by: Pravin Karkhanis on May 28, 2010 3:19 AM

Trying to log onto my aol mail to read my inbox, it says firefox is blocking to prevent this

I am trying to log on to my AOL email to read my inbox, but at the very top when I try to log on, it comes on quick, and leaves quickly so I can't read it all, but it generally says firefox is blocking logon

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Data Load - ALE inbox of SAP BW is identical to ALE outbox of the SS

Hello,
I am doing a init for a cube, and the load is still running without ending.
no errors given but when I look at the step by stpe analysis it gives the following message.
Diagnosis
    No errors could be found. The current process has probably not finished
    yet.
System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source
    system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
Thanks,
VJ

Hi Vijay,
The message you are seeing is a standard message that is shown while the data load is in running state in the monitor.
Periodically refresh the monitor screen and check whether records are getting extracted.Example if records getting extracted really slow,you will see the figure 'XYZ(records) from XYZ' slowly increasing.
Also keep checking detail tab to see if steps are slowly turning GREEN or not.
If load still stuck in yellow,maybe u need to re-run it and look into performance tuning options.
cheers,
Vishvesh

Emails received but no alert - Mails also show as read in inbox

Hi Guys,
Just got my first BB from work (9300 Curve on 02 UK) - and I'm having some issues with email.
I set up my email account (it's a Lotus Notes Server) and am receiving emails perfectly well, but there is currently no notification sounding when emails arrive, even though I've asked it to play a sound and vibrate.
In fact, even the mail notification icon showing the number of new mails on the home screen doesn't update with an extra mail. When I go into the inbox, I can see the email has been received but it's marked as read which seems to be why I'm not getting any kind of notification.
My blackberry settings seem to be the same as my colleagues, so could this be a Lotus Notes / Server setting issue?
Thanks in advance!
James

Hi,
Which protocol do you use on your iPhone? POP3 or IMAP?
I also suggest you log on Webmail, check if the email read/unread status on Web matches that on iPhone or on Outlook Client.
In case it's the rule that caused the issue, I suggest you start Outlook with the switch "/cleanrules", this will start Outlook and deletes client-based and server-based rules:
Press Win + R and type “outlook.exe /cleanrules” in the blank box, then press Enter.
Then re-create the rule on Outlook, test if this issue persists.
Regards,
Melon Chen
TechNet Community Support

Read the Inbox,Drafts, And Sent Items SMS in J2ME

Hello,
i want to read the SMS from Inbox,Drafts, And Sent Items. Is their any way to read this.
Sachin Kapse

Yeah ... i'm trying to do the same thing .. well ... this is the only work around that i found ... The platform i'm working on is a nokia 6630 2nd Edition (series 60, midp 2.0) .. since the device has JSR75 ( connection to file and pim ) ... you can open the c:\system\mail\ directory (note, it maybe at another location) and phase the messages stored in there directly ..

My inbox is not reading all the messages in Inbox.mozmsgs, and so opens with only recent messages. How do I get it to read the Inbox.mozmsgs?

Happened after a system crash. Thunderbird works, and I can read all my other folders, but I can't get access to the emails that were in my inbox yesterday and earlier.

Just one profile appears, so that doesn't appear to be the problem.
On your questions:
1) What operating system do you use: Windows 7
2) Are you using IMAP or POP? POP
3) If your mail server has a browser interface do the messages show up there? No, they were downloaded locally.
4) Right click on the folder in question and select Properties.
a) Number of messages? 104
b) Size on disk? 47.7 MB
But this is probably not the question you want to know, since this is the size of the folder and the mail I've received only after the crash and the disappearance of the email. At the time the folder failed, I would estimate it had around 1500 messages and probably close to 1GB in size.
5) Left click on the account name; View settings for this account; highlight Server settings; What choices are marked under "When I delete a message"?
There is no "when I delete a message" option under server server settings for this account. "Check for new messages at start up." "Check for new messages every 10 minutes," and "Automatically download new messages" are all checked under server settings. Fetch headers only and Leave messages on server are not. From a quick search online I see that this is not a POP option.
6) What, if any, antivirus program do you have installed? McAfee Security Scan Plus
Thanks. Still hoping to recover the lost messages.

Reading sms inbox in j2me

Hi!
I need to know how to read the sms in inbox using J2me . still J2me don't support this or MIDP 2.0 offers some solution for this please let me know ASAP
Regards

Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

Read SAP Inbox Excel Attachment

Hi,
In my SAP inbox there is a mail with Excel attachment. Can you please let me know how to read this excel attachment. I am able to read contents but not the Excel Attachment.
Thanks,
Usman Malik

Hi,
I think using FM SO_DOCUMENT_READ_API1 you can read attachment content.
Kindly check the following link:
http://wiki.sdn.sap.com/wiki/display/ABAP/ReadingPDFattachmentfromsapinboxthrough+ABAP
Thanks & Regards,
S.Senthilkumar.

Read user inbox content (not headers)

Hi,
I can read the headers in user inbox folders easily, but after reading headers, i need contents of messages. How can i read it ? I searched all over the sdn,ittoolbox but could not find :=).
i am using,
SO_USER_READ_API1
SO_FOLDER_READ_API1
functions to read, folders and headers. But i need contents.
Help help help ! emergency emergency :=).

try this function module and you can debug it;
SO_OBJECT_READ;

READING A INBOX MESSAGE, I see From and To and no buttons. Why?

Just installed latest Firefox rlse. I forget the no.
Now reading emails shows me From, To, and message, but no buttons like before: REPLY, etc.

I don't now if the cause is related, but 2 messages from the same sender have the same problem, and no others that I can see:
After the Compose Message button, all the buttons to the right are missing.
Other messages I've read since then DO NOT have this problem!
Will clear cache as you suggested.

Reading mails from Zimbra inbox.

Hi,
I have a basic program to read the inbox of a zimbra mail user.
i have supplied the necessary information like username passwd,
Can someone please tell me what is the pop server required for the Zimbra mail client.
i know it is somethign do with the LDAP. but how do i find tht out?

You might want to use IMAP to read mail from hMail Server, if you keep messages on server. It has a lot more features for managing messages on server.
A lot of POP3 implementations (both client and server side) will automatically delete retrieved messages. I don't know exactly what JavaMail does in that regard, nor of hMailServer, but I do know some mailservers out in the wild will ALWAYS delete mails retrieved with POP3.

Reading ALE inbox

Similar Messages

Maybe you are looking for