Data type selection Problem in ztable to use in the Module Pool Program
Dear Experts,
I have created a z-table which is used in Module Pool Program in which i have to save the information saved by the endusers in z-table. But the problem comming is that the amount of information saved by the endusers is so havey & our table is just limited for the 50 characters which is not sufficiet. So I urge you to please tell me what & which type of data type should I have to use to store maximum amount of information in our zt-able which is available in SAP ECC6.0.
Thanks & Regards,
Akg
Dear Akg,
u can resolve ur problem in following ways,
1. You can declare the field in a table without an Data element.
i.e. In the length field . using F4 help in length field how many characters u want u enter.
2. In the same u can search for an standard data element and use the same.
3. Creating an custom data element .
Reward if helps to u!!!
Regards,
MNR
Similar Messages
-
Using images in module pool programming.
Can anyone tell the way to display an image in a module pool program screen?
If its not too much of a headache, please give a detailed code.Hi Sahil,
Well you might want to take a look at the following link. I used SE78 to upload the picture and then used the picture in the module pool screen. I think that you can upload almost any picture using se78.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/uploading%2bse78%2bpictures%2bin%2bscreen
Edited by: Aditya Niyogi on May 26, 2008 11:25 AM -
BADI's being used in MP000100 (module pool program for Infotype 1)
Hi,
In module pool program MP000100( for Infotype 1 i.e. HR related), what are the BADI's being used in PBO module of screen no- 2000 ?
I need to add some codes, if there is no BADI then where i can add codes as i need to default organizational field according to position ID field ?
Thanking you in anticipation.>
Vaibhav Kumar wrote:
> I need to add some codes, if there is no BADI then where i can add codes as i need to default organizational field according to position ID field ?
> Thanking you in anticipation.
Why do you need a BAdI for that? Your Business/Functional Analyst should be able to handle it using a feature via the Tcode PE03.
BTW, HRPAD00INFTY is one that can be useful.
~Suresh -
How to add ALV button using OO in module pool program using ALV grid
Hello Gurus!!!
Want some tips related how to add button using ALV Grid(OO).
I want to display the button for search, sort ....
Please suggest the step -by-step procedure for implementation of these button.
I am designing the code for transaction FB03. Header data has been displayed but want to display the line items.
Kindly suggest your answers.
Thanks,
SachinHi,
CLASS SELSCR_APPLICATION DEFINITION DEFERRED.
CLASS SELSCR_APPLICATION DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLE_TOOLBAR
FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
IMPORTING E_OBJECT E_INTERACTIVE,
HANDLE_USER_COMMAND
FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
IMPORTING E_UCOMM.
ENDCLASS. "SELSCR_APPLICATION DEFINITION
CLASS SELSCR_APPLICATION IMPLEMENTATION.
METHOD HANDLE_TOOLBAR.
DATA: LS_TOOLBAR TYPE STB_BUTTON.
append SAVE icon
CLEAR LS_TOOLBAR.
MOVE 'SAVE' TO LS_TOOLBAR-FUNCTION.
MOVE ICON_SYSTEM_SAVE TO LS_TOOLBAR-ICON.
MOVE 'Save' TO LS_TOOLBAR-QUICKINFO.
MOVE ' ' TO LS_TOOLBAR-DISABLED.
APPEND LS_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
CLEAR LS_TOOLBAR.
ENDMETHOD. "handle_toolbar
METHOD HANDLE_USER_COMMAND.
CASE E_UCOMM.
WHEN 'SAVE'.
PERFORM UPDATE_FIELDS.
ENDCASE.
ENDMETHOD.
ENDCLASS. "SELSCR_APPLICATION IMPLEMENTATION
these lines should be after calling method SET_TABLE_FOR_FIRST_DISPLAY
SET HANDLER G_APPLICATION1->HANDLE_TOOLBAR FOR GRID1.
CALL METHOD grid1->set_toolbar_interactive.
rgds,
bharat. -
Problem with increasing input field length in module pool programming.
Hi All,
I have created a screen in which i have used table control wizard. In my table control I have an input field. The problem is, this input filed only takes 23 inputs at a time. I need to make this field unfixed. This is an quantity field. I am not understanding why this is happening. Can anybody plz help me in this regard ?
Thanks in advance.
Tripod.HI Tripod ,
YOu can add Lines to Table control .
Add one button by name ADD LINES : give func code 'ADD'
IN PBO ...
if it_mat[] is not initial .
describe table it_mat lines ln .
tab_ctrl-lines = ln .
endif.
case sy-ucomm .
when 'ADD' .
perform add_lines .
endcase .
form add_lines .
ln = ln + 1 .
clear it_mat .
append initial line to it_mat .
endform .
regards
deepak. -
Select-options in module pool programming
hi,
I need to have four fields as part of my layout that are select-options fields with multiple values entry options. Since layout doesnt have 'select-options" functionality, i defined it from the module pool program, ie: I wrote a selection screen in the PBO module. The problem is if i make any changes to the code, the layout changes back to the previuos format.
Is there any way in which i can combine selection-screen logic with my layout.
Thanks,
SruthyHI
GOOD
Selection Screen Version
Only for Executable Programs
If you do not specify a selection screen version, the system automatically creates a selection screen based on the selection criteria of the logical database and the parameters and select-options statements in the program.
If you want to use a different selection screen of the logical database, enter a number in this field. The number must be smaller than 1000 and correspond to an additional selection screen of the logical database. The possible values help displays a list of available selection screens. You can also look in the selection include of the logical database (program DBxxxSEL, where xxx is the name of the logical database).
Tomislav
1. In the top include define the selection screen with
selection-screen begin of screen 9250 as subscreen.
SELECT-OPTIONS analyt FOR ztv_cc02-zd_mumla .
selection-screen end of screen 9250.
2. Using the screen painter create a subscreen area in
the main screen where you want to have this.
3. Then, in the screen flow logic code as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000. etc
call subscreen SUB1 including 'PROGRAM NAME' '9250'.
PROCESS AFTER INPUT.
module exit at exit-command. etc.
call subscreen SUB1.
THANKS
MRUTYUN -
How to insert data into a Ztable by using module pool programming??
Hi,
I am new to ABAP, Actually I have made a Ztable now I want to insert data by using the module pool programming. In which there are all field in the first screen and there is a save button. So when ever i press SAVE button it shud update the Ztable with new entries.But actually I am not getting How can i update that??can you please send me the code for inserting data.
Thanks in Advance.
Edited by: Swapna Ram on Feb 17, 2008 12:01 AMSwapna,
Check this thread...
Custom Table updation thru table control
ALso check this..
Dialog programming -
Table maintenance by using module pool program
Hi
Please give me step by step procedure to generate table maintenance by using module pool programWhile creating table maintenance, you can go thro' the module pool program used for that.In that,in PBO part,just try making particular field active = 1 inside loop at screen.
Girish Kumar Lo...
Posts: 1,518
Questions: 2
Registered: 4/19/07
Forum points: 1,982
Re: Regarding Table maintanence generator
Posted: Jun 26, 2007 9:02 AM in response to: Younus Khan Reply E-mail this post
here is the code for that
REPORT ZTAB_MAINT
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
T Y P E D E C L A R A T I O N S
*--Types declaration for selection to be passed as parameter into
*--VIEW_MAINTENANCE_CALL FM
TYPES: BEGIN OF TP_RANGETAB.
INCLUDE STRUCTURE VIMSELLIST.
TYPES: END OF TP_RANGETAB.
D A T A D E C L A R A T I O N S
DATA: V_MATNR TYPE MATNR, " Material Number
V_WERKS TYPE WERKS_D, " Plant
V_KONOB TYPE KONOB, " Product allocation object
V_ZCPLT(40) TYPE C. " Message
I N T E R N A L T A B L E D E C L A R A T I O N S
Internal table to subroutine code
*Internal table used as selection for VIEW_MAINTENANCE_CALL FM
DATA: IT_RANGETAB TYPE STANDARD TABLE OF TP_RANGETAB WITH HEADER LINE.
*--Internal table used for getting the tablefields
DATA: BEGIN OF IT_HEADER OCCURS 1.
INCLUDE STRUCTURE VIMDESC.
DATA: END OF IT_HEADER.
*--Name Tabel
DATA: BEGIN OF IT_NAMTAB OCCURS 50.
INCLUDE STRUCTURE VIMNAMTAB.
DATA: END OF IT_NAMTAB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_MATNR OCCURS 0,
MATNR TYPE MATNR,
END OF IT_MATNR.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_WERKS OCCURS 0,
WERKS TYPE WERKS,
END OF IT_WERKS.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_KONOB OCCURS 0,
KONOB TYPE KONOB,
END OF IT_KONOB.
*--Used for handling 'BT' option
DATA: BEGIN OF IT_ZCPLT OCCURS 0,
ZCPLT(40) TYPE C,
END OF IT_ZCPLT.
I N P U T S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK SELSCR WITH FRAME TITLE TEXT-001.
RANGES: R_MATNR FOR V_MATNR.
RANGES: R_WERKS FOR V_WERKS.
RANGES: R_KONOB FOR V_KONOB.
RANGES: R_ZCPLT FOR V_ZCPLT.
Select Options
SELECT-OPTIONS: S_MATNR FOR V_MATNR NO-EXTENSION, " Material
S_WERKS FOR V_WERKS NO-EXTENSION, " Plant
S_KONOB FOR V_KONOB NO-EXTENSION,
" Product allocation object
S_ZCPLT FOR V_ZCPLT NO-EXTENSION. " Plant
SELECTION-SCREEN END OF BLOCK SELSCR.
A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN.
Validate user inputs
PERFORM FRM_VALIDATIONS.
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
Fetch Data from Data Base
PERFORM FRM_GET_DATA.
S U B R O U T I N E S
*& Form frm_get_data
Call the function module VIEW_MAINTENNACE_CALL to get data
based on selection criteria
FORM FRM_GET_DATA .
CALL FUNCTION 'VIEW_GET_DDIC_INFO'
EXPORTING
VIEWNAME = 'ZTAB'
TABLES
X_HEADER = IT_HEADER
X_NAMTAB = IT_NAMTAB
SELLIST = IT_RANGETAB
EXCEPTIONS
NO_TVDIR_ENTRY = 1
TABLE_NOT_FOUND = 2.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Error in ZTAB table'(005).
ENDIF.
CLEAR: IT_RANGETAB,
IT_RANGETAB[].
LOOP AT IT_NAMTAB.
CASE IT_NAMTAB-VIEWFIELD.
WHEN 'MATNR'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'MATNR'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_MATNR.
CASE S_MATNR-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_MATNR-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_MATNR,
R_MATNR[].
R_MATNR-SIGN = 'I'.
R_MATNR-OPTION = 'BT'.
R_MATNR-LOW = S_MATNR-LOW.
R_MATNR-HIGH = S_MATNR-HIGH.
APPEND R_MATNR.
SELECT MATNR
INTO TABLE IT_MATNR
FROM ZTAB
WHERE MATNR IN R_MATNR.
DELETE ADJACENT DUPLICATES FROM IT_MATNR COMPARING MATNR
LOOP AT IT_MATNR.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_MATNR-MATNR.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_MATNR-OPTION.
IT_RANGETAB-VALUE = S_MATNR-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'WERKS'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'WERKS'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_WERKS.
CASE S_WERKS-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_WERKS-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_WERKS,
R_WERKS[].
R_WERKS-SIGN = 'I'.
R_WERKS-OPTION = 'BT'.
R_WERKS-LOW = S_WERKS-LOW.
R_WERKS-HIGH = S_WERKS-HIGH.
APPEND R_WERKS.
SELECT WERKS
INTO TABLE IT_WERKS
FROM MARC
WHERE WERKS IN R_WERKS.
DELETE ADJACENT DUPLICATES FROM IT_WERKS COMPARING WERKS
LOOP AT IT_WERKS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_WERKS-WERKS.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_WERKS-OPTION.
IT_RANGETAB-VALUE = S_WERKS-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'KONOB'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'KONOB'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_KONOB.
CASE S_KONOB-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_KONOB-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_KONOB,
R_KONOB[].
R_KONOB-SIGN = 'I'.
R_KONOB-OPTION = 'BT'.
R_KONOB-LOW = S_KONOB-LOW.
R_KONOB-HIGH = S_KONOB-HIGH.
APPEND R_KONOB.
SELECT KONOB
INTO TABLE IT_KONOB
FROM T190
WHERE KONOB IN R_KONOB.
DELETE ADJACENT DUPLICATES FROM IT_KONOB COMPARING KONOB
LOOP AT IT_KONOB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_KONOB-KONOB.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_KONOB-OPTION.
IT_RANGETAB-VALUE = S_KONOB-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
WHEN 'ZCPLT'.
CLEAR IT_RANGETAB.
IT_RANGETAB-VIEWFIELD = 'ZCPLT'.
IT_RANGETAB-TABIX = SY-TABIX.
IT_RANGETAB-DDIC = IT_NAMTAB-READONLY.
LOOP AT S_ZCPLT.
CASE S_ZCPLT-OPTION.
WHEN 'EQ'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'EQ'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN 'BT'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'GE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'LE'.
IT_RANGETAB-VALUE = S_ZCPLT-HIGH.
APPEND IT_RANGETAB.
WHEN 'NB'.
CLEAR: R_ZCPLT,
R_ZCPLT[].
R_ZCPLT-SIGN = 'I'.
R_ZCPLT-OPTION = 'BT'.
R_ZCPLT-LOW = S_ZCPLT-LOW.
R_ZCPLT-HIGH = S_ZCPLT-HIGH.
APPEND R_ZCPLT.
SELECT ZCPLT
INTO TABLE IT_ZCPLT
FROM ZTAB
WHERE ZCPLT IN R_ZCPLT.
DELETE ADJACENT DUPLICATES FROM IT_ZCPLT COMPARING ZCPLT
LOOP AT IT_ZCPLT.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = IT_ZCPLT-ZCPLT.
APPEND IT_RANGETAB.
ENDLOOP.
WHEN 'NE'.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = 'NE'.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
WHEN OTHERS.
IT_RANGETAB-AND_OR = 'AND'.
IT_RANGETAB-OPERATOR = S_ZCPLT-OPTION.
IT_RANGETAB-VALUE = S_ZCPLT-LOW.
APPEND IT_RANGETAB.
ENDCASE.
ENDLOOP.
ENDCASE.
ENDLOOP.
IF S_ZCPLT[] IS INITIAL.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
EXPORTING
ACTION = 'U'
VIEW_NAME = 'ZTAB_ZTEST'
TABLES
DBA_SELLIST = IT_RANGETAB
EXCEPTIONS
CLIENT_REFERENCE = 1
FOREIGN_LOCK = 2
INVALID_ACTION = 3
NO_CLIENTINDEPENDENT_AUTH = 4
NO_DATABASE_FUNCTION = 5
NO_EDITOR_FUNCTION = 6
NO_SHOW_AUTH = 7
NO_TVDIR_ENTRY = 8
NO_UPD_AUTH = 9
ONLY_SHOW_ALLOWED = 10
SYSTEM_FAILURE = 11
UNKNOWN_FIELD_IN_DBA_SELLIST = 12
VIEW_NOT_FOUND = 13
MAINTENANCE_PROHIBITED = 14
OTHERS = 15.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " frm_get_data
*& Form frm_validations
Validating field values
FORM FRM_VALIDATIONS .
Material number should not be validated (10/17/2005)
CLEAR V_MATNR.
SELECT SINGLE MATNR
INTO V_MATNR
FROM MARA
WHERE MATNR IN S_MATNR.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Material not found'.
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_WERKS.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (WERKS) not found'(002).
ENDIF.
CLEAR V_KONOB.
SELECT SINGLE KONOB
INTO V_KONOB
FROM ZTAB
WHERE KONOB IN S_KONOB.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH ' Product allocation object not found'(003).
ENDIF.
CLEAR V_WERKS.
SELECT SINGLE WERKS
INTO V_WERKS
FROM ZTAB
WHERE WERKS IN S_ZCPLT.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'Plant (ZCPLT) not found'(004).
ENDIF.
ENDFORM. " frm_validations
reward points if it is usefull ...
Regarding Table maintanence generator -
How to use one module pool program in another module pool programming?
Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement. -
Using logical database to fetch data in Module Pool programming
I am unable to use logical database to fetch data in case of Module pool programming. Has anyone ever faced problems with it...?
use f.m LDB_PROCESS....
refer demo program DEMO_LOGICAL_DATABASE -
Problem in Select-option in Module Pool Programming
Hi,
I'm making one module pool programming. In that, I've to make select-option. For that I'm using this command --
1) In PBO --
CALL SUBSCREEN sub INCLUDING 'YBOE_PRINT' '5100'.
2) In PAI --
CALL SUBSCREEN sub.
But, Syntax Error is generated as below --
"." or "ID.........FIELD" expected after "SUBSCREEN"
Please suggest.
Thanks.
Kumar Saurav.Hi Ramchander,
Thanks for replying. But, even if I changed Prog_Name with term 'repid', that same error regarding
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
is coming up.
I guess, there is any step missing.
Lemme describe what I'm doing in points --
1) I declared SELECTION-SCREEN with screen no --
SELECTION-SCREEN BEGIN OF SCREEN 5100 AS SUBSCREEN.
PARAMETERS : p_bukrs TYPE ekko-bukrs OBLIGATORY DEFAULT '1000'.
SELECT-OPTIONS: kunnr FOR kna1-kunnr.
select-options: gjahr for bsid-gjahr.
select-options: bank for bsed-bank.
select-options: budat for bsid-budat.
SELECTION-SCREEN END OF SCREEN 5100.
2) Then I made a call in PBO as given above.
3) Finally, a call to that subscreen is made in PAI - again as given above.
When I checked that, this gave the error.
Are you looking any erroneous step ...?
Please guide.
Thanks.
Kumar Saurav. -
How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.
I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible. -
In Numbers, how do I lock in the date and time data when an IF/THEN formula is used with the "NOW" function?
=IF(I127,NOW()," ")
I127 equals a check box. The formula retuns a value of the current date and time when a check is placed in the box. How does one lock that date and time so that it cannot be changed?I don't think it is possible to lock in the date and time using a formula. You could put NOW() in a cell, copy, and Edit Paste Formula Results where you want the result.
Or if you are "time stamping" a lot, you may find this Automator Service (Dropbox download) helpful. It puts a "Today" function (actually it should be named "Now" because it includes both date and time) in your Services menu like this:
Just doubleclick the .workflow package to install it. You may have to click "download anyway" in System Preferences > Privacy & Security.
If you want you can assign the service a keyboard shortcut in System Preferences here:
SG -
How to create selections-screens to display PO using module pool program
All,
I'm new to module pool programming. Can any one please provide me where to create selections screens to display existing purchase orders using the below selection criteria in thr module pool program.,
SELECT-OPTIONS : S_LIFNR FOR EKKO-LIFNR,
S_BSART FOR EKKO-BSART,
S_BUKRS FOR EKKO-BUKRS,
S_WERKS FOR EKPO-WERKS OBLIGATORY,
S_BEDAT FOR SY-DATUM,
S_EINDT FOR EKET-EINDT,
S_EBELN FOR EKKO-EBELN,
S_MATNR FOR EKPO-MATNR.
provide me step by step to do this.Hi,
Thanks for the reply can you please let me know.
How can I create the ranges
like low and high in the selection.
Using se51 i was able to do only one i,e
example I need
purchase order number----
f4 -
f4
Can please tell me how to do this -
Hi I just updated from Snow Leopard to Mountain Lion.
I write DVD's using Final Cut Pro, creating a DVD that plays HD and Standard Definition on one disk.
My problem is when I used load the disk on my G5 it would ask if you want High Definition or Standard Definition, now it just defaults to Standard Definition.(I'm using Apple's DVD Player)
Can I fix this problem?Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?
Maybe you are looking for
-
How to setup breakpoints in a vector space?
Hi, How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn? Thanks.
-
How do I get an older version of Pages for older Macbook?
I am interested in an older version of Pages, one that had the good template options for flyers. I have OS 10.7.5 and since I have an older mac book laptop, I cannot upgrade to Mavericks. How do I get an older version of Pages? Ultimately, I'm intere
-
Does the 3D fly over work on my iPhone 4 because I just downloaded the iOS 6 software but the new maps doesn't look like it has the 3D on my IPhone 4
-
How get the all the table values to another table based on Action
Hi All, I am new to webdyn pro. I have two tables Table1 and Table2 with context nodes Tab and Tab1. Table1 I have a button Save If I submit Save the data from first table to second table . I was written the code IPrivateTableScrollBar.ITabElement el
-
X11 exception when loading graphics
Hello, Oracle community. It's my first post. I installed Weblogic, SOA and BAM in development mode on Linux. I'm accessing it from Windows. I managed to establish a DB connection, extract data, but there is one thing missing: the graphics. Any time i