BADI's being used in MP000100 (module pool program for Infotype 1)
Hi,
In module pool program MP000100( for Infotype 1 i.e. HR related), what are the BADI's being used in PBO module of screen no- 2000 ?
I need to add some codes, if there is no BADI then where i can add codes as i need to default organizational field according to position ID field ?
Thanking you in anticipation.
>
Vaibhav Kumar wrote:
> I need to add some codes, if there is no BADI then where i can add codes as i need to default organizational field according to position ID field ?
> Thanking you in anticipation.
Why do you need a BAdI for that? Your Business/Functional Analyst should be able to handle it using a feature via the Tcode PE03.
BTW, HRPAD00INFTY is one that can be useful.
~Suresh
Similar Messages
-
Data type selection Problem in ztable to use in the Module Pool Program
Dear Experts,
I have created a z-table which is used in Module Pool Program in which i have to save the information saved by the endusers in z-table. But the problem comming is that the amount of information saved by the endusers is so havey & our table is just limited for the 50 characters which is not sufficiet. So I urge you to please tell me what & which type of data type should I have to use to store maximum amount of information in our zt-able which is available in SAP ECC6.0.
Thanks & Regards,
AkgDear Akg,
u can resolve ur problem in following ways,
1. You can declare the field in a table without an Data element.
i.e. In the length field . using F4 help in length field how many characters u want u enter.
2. In the same u can search for an standard data element and use the same.
3. Creating an custom data element .
Reward if helps to u!!!
Regards,
MNR -
Using images in module pool programming.
Can anyone tell the way to display an image in a module pool program screen?
If its not too much of a headache, please give a detailed code.Hi Sahil,
Well you might want to take a look at the following link. I used SE78 to upload the picture and then used the picture in the module pool screen. I think that you can upload almost any picture using se78.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/uploading%2bse78%2bpictures%2bin%2bscreen
Edited by: Aditya Niyogi on May 26, 2008 11:25 AM -
How to add ALV button using OO in module pool program using ALV grid
Hello Gurus!!!
Want some tips related how to add button using ALV Grid(OO).
I want to display the button for search, sort ....
Please suggest the step -by-step procedure for implementation of these button.
I am designing the code for transaction FB03. Header data has been displayed but want to display the line items.
Kindly suggest your answers.
Thanks,
SachinHi,
CLASS SELSCR_APPLICATION DEFINITION DEFERRED.
CLASS SELSCR_APPLICATION DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLE_TOOLBAR
FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
IMPORTING E_OBJECT E_INTERACTIVE,
HANDLE_USER_COMMAND
FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
IMPORTING E_UCOMM.
ENDCLASS. "SELSCR_APPLICATION DEFINITION
CLASS SELSCR_APPLICATION IMPLEMENTATION.
METHOD HANDLE_TOOLBAR.
DATA: LS_TOOLBAR TYPE STB_BUTTON.
append SAVE icon
CLEAR LS_TOOLBAR.
MOVE 'SAVE' TO LS_TOOLBAR-FUNCTION.
MOVE ICON_SYSTEM_SAVE TO LS_TOOLBAR-ICON.
MOVE 'Save' TO LS_TOOLBAR-QUICKINFO.
MOVE ' ' TO LS_TOOLBAR-DISABLED.
APPEND LS_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
CLEAR LS_TOOLBAR.
ENDMETHOD. "handle_toolbar
METHOD HANDLE_USER_COMMAND.
CASE E_UCOMM.
WHEN 'SAVE'.
PERFORM UPDATE_FIELDS.
ENDCASE.
ENDMETHOD.
ENDCLASS. "SELSCR_APPLICATION IMPLEMENTATION
these lines should be after calling method SET_TABLE_FOR_FIRST_DISPLAY
SET HANDLER G_APPLICATION1->HANDLE_TOOLBAR FOR GRID1.
CALL METHOD grid1->set_toolbar_interactive.
rgds,
bharat. -
How to use one module pool program in another module pool programming?
Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement. -
Runtime errors in module pool programming
HI all,
I have done a module pool program for invoice tracking level wise.
I am encountering a runtime error, LIST_TOO_MANY_LPROS, while execution ie., for two and more than two updations of the database.
The error analysis says that "At present, the maximum permitted number of nested screen levels is restricted to 50".
Short Text :- "No further list processing possible".
Can anyone please come out with a solution for this problem.
regards
samarendra.
Edited by: samarendra penugonda on Nov 5, 2008 5:03 AMHi
U should replace the comand CALL SCREEN with LEAVE TO SCREEN.
The command CALL SCREEN create an internal mode to link the calling screen to called screen automatically: in this way when it needs to back to calling screen it doesn't need to specify the screen number but only to use:
- LEAVE TO SCREEN 0.
or
- SET SCREEN 0. LEAVE SCREEN.
Now if you use LEAVE TO SCREEN, u need to indicate the screen when it needs to back to calling screen:
- Go from 100 to 200
LEAVE TO SCREEN 200. (Instead of CALL SCREEN 200)
- Back to 100.
LEAVE TO SCREEN 100. (Instead of LEAVE TO SCREEN 0)
Max -
Creating module pool programming in abap objects
Hello...
I just wanted to know how u create a give modulepool programming in classes and objects.Could anyone tell me the procedure how to do so.And i knew that module pool programming has become obsolete and now everyone are using object oriented concept in module pool programming.soo i want why r they using soo and what is the drawback in using the module pool programming instead of oops concepts.Could anyone give me the clear explanation..Hello Chadipriya,
You can create module pool program for both ABAP and ABAP OO(Object Oriented).
The thing is in OO u have to declare classes,objects and methods.
<b>Procedure oriented approach</b>
1. Emphasis on tasks
2. Large programs are divided into smaller programs known as functions
3. Most of the functions share global data
4. Data move openly around the system from function to function
<b>Object oriented approach</b>
Emphasis on things that does those tasks
Programs are divided into objects
3. Data structures are designed such that they characterized the objects
4. Functions that operate on the data of an object are tied together in the data structure
5. Data can be hidden and cannot be accessed by external functions
6. New data and functions can be easily added whenever necessary
Go to SE80 ---> Select Program ---> Give ur program name and type this code below :-
REPORT YSUBDEL LINE-SIZE 120.
CLASS parentclass DEFINITION .
PUBLIC SECTION.
DATA : commondata(30) type c value 'Accessible to all'.
METHODS : SHOWVAL.
PROTECTED SECTION.
DATA : protectdata(40) type c value 'Protected data'.
private section.
data : privatedata(30) type c value 'Private data'.
ENDCLASS.
CLASS parentclass IMPLEMENTATION.
METHOD : SHOWVAL.
write:/5 'All data from parentclass shown:-'.
write:/ sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA,
/5 PRIVATEDATA.
endmethod.
endclass.
CLASS childclass DEFINITION INHERITING FROM parentclass.
PUBLIC SECTION .
METHODS : subval.
ENDCLASS.
CLASS childclass IMPLEMENTATION.
method : subval.
skip 1.
write:/5 'Data of parent shown from child-'.
write:/5 sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA.
Commondata = 'Public data changed in subclass'.
Protectdata = 'Protected data changed in subclass'.
write:/5 sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA.
endmethod.
endclass.
You r using OOPs concepts in module pool program and not module pool programming instead of oops concepts.
<b>Reward points if helpful</b>
Thanks,
Sachin -
Doubt regarding module pool program
Hi experts,
I need to use bapi in module pool program
can we use it ? I hope we can use,
Please any body give some sample code
Thanks in advance
Rangabapi like another function module can be used in module pool based ojn ur desire
a sample code is :
case sy-ucomm.
when 'create'
call bapi u require
end case
hope it gives u an idea
regards
navjot
reward accordingly -
Function module / table which lists screen numbers in module pool program
Hi everyone,
I wish to make a list of all screen numbers used in my module pool program Is there any FM / table which maps module pool program name with all the screens used in it?
For example, if my module pool is SAPMZPROG and it has screens 9001, 9002 and 9003, then I want to have a report as follows:
Input to the report (selection screen): SAPMZPROG
Output:
9001
9002
9003
Thanks,
ShaileshHello
Try tables D020S, D020T -
Error message in Module Pool program
Hi folks,
I have developed a module pool program for a custom screen. while entering data on the screen,
it throws a error message for a wrong data entry.But, even after cliking enter, the error message coming repeatedly and the screen is disabled.I havent inculded the screen fields in between CHAIN-ENDCHAIN.Is this the reason for the bug. If so, i have approximately 50 fields on my screen.Should i keep all those fields in between CHAIN-ENDCHAIN. Pls suggest me...
Thanks in advance,
Shyam.Hi Shyam,
Please find the LInk below
Hope this is help full
[Error Message|Re: chain endchain]
Thanks
kalyan -
I created a module pool program for inserting/changing/deleting a database record through a table control on a screen. Now everything is working fine. When I executed that module pool program by a transaction (there is only one screen in this program which has table control on it), I would like that screen to come-up as a pop-up which I am not able to figure how to do it. Any ideas?
Help is appreciated.
Thanks in advancein se51 create the screen , and check the radio button Dialog box. and place alll the components...and then save /activate it.
now in your program call the screen like this..
call screen 200 starting at 1 5
ending at 30 20.
regards
vijay -
Can we use Initilization event in module pool program?
Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL -
Use of "Pool Table(s)" in Module Pool Program
Hi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PMHi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PM -
How to Use F4 help in Module Pool Programming??????
Hi Friends,
This is Jagadeesh, I have an issue Module Pool Programming. Any of you can go through on this and can give an required answer.
Issue is as follows,
I have an Input/Output field for that i need to give f4 help, based on that field the related data should sit in to my table control. The thing is there is no relation between the input/output field and the table control fields.
Is this possible? If so how can i do this.Hi Jagadeesh,
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
regards,
Dj
reward for all useful answers. -
Using logical database to fetch data in Module Pool programming
I am unable to use logical database to fetch data in case of Module pool programming. Has anyone ever faced problems with it...?
use f.m LDB_PROCESS....
refer demo program DEMO_LOGICAL_DATABASE
Maybe you are looking for
-
Has anybody solved this problem? I can only print a 4x5 instead of a full page. HP says it's an adobe problem not theirs. I tried adding fax in front of the printer's name as someone suggested but it only wanted to send a fax. So that didn't work. Pl
-
Hi I really hope someone can help me. I can reply to emails but I cannot seem to send an emal from scratch. Im not sure what happened but the send option just doesnt come up anymore, I can only save as draft. And once saved it will not send either. P
-
HT5007 why isn't this available in canada?
It's not like the movies are especially different...
-
I just upgraded to iOS7 and now am no longer able to kill running apps using what was well know sequence 1. Double-click the Home button to see all Inactive Apps 2. Hold the Apps down for a second or two until you see the minus sign 3. Tap the minus
-
Somebody knows if apple replace the Lighting connector?
Hi mi lighting connector is not working anymore, this lighting connector only worked for 10 months and now I don't know if apple will be able to replace it.