Problem with increasing input field length in module pool programming.
Hi All,
I have created a screen in which i have used table control wizard. In my table control I have an input field. The problem is, this input filed only takes 23 inputs at a time. I need to make this field unfixed. This is an quantity field. I am not understanding why this is happening. Can anybody plz help me in this regard ?
Thanks in advance.
Tripod.
HI Tripod ,
YOu can add Lines to Table control .
Add one button by name ADD LINES : give func code 'ADD'
IN PBO ...
if it_mat[] is not initial .
describe table it_mat lines ln .
tab_ctrl-lines = ln .
endif.
case sy-ucomm .
when 'ADD' .
perform add_lines .
endcase .
form add_lines .
ln = ln + 1 .
clear it_mat .
append initial line to it_mat .
endform .
regards
deepak.
Similar Messages
-
How to Add F4 Help To a Screen Field In a Module Pool Program
Hi Friends,
1. How to Add F4 Help To a Screen Field In a Module Pool Program?
2. How to select a single cell in ALV report output for interactive reporting ?
Kindly give code example.
regards,
PradeepHi,
Try using the fm 'F4IF_INT_TABLE_VALUE_REQUEST'.
Refer the link below for selecting single cell.
alv
Reward points if useful.
Regards
Rose -
How to validate the field values in module pool program?
Hi Guys
I am working with module pool programming.
Here I want to validate the fields like below.
with out filling all the fields if I click SAVE option it has to show a message that all fields has to be filled. This can be done by checking all the fields individually.
I think it can be done through <b>LOOP AT SCREEN ......ENDLOOP</b>. sequence.
If it is possible, can anyone help me?You need to write the Module in between the CHAIN and ENDCHAIN statment in SE51
If you send a warning or error message from a module <mod> that you called using a FIELD statement as follows:
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1>.
FIELD: <g1>, <g 2>,...
MODULE <mod2>.
ENDCHAIN.
all of the fields on the screen that belong to the processing chain (all of the fields listed in the field statements) are made ready for input again. Other fields are not ready for input. Whenever the MODULE statement appears within a processing chain, even if there is only one FIELD attached to it, all of the fields in the chain (not only the affected field) are made ready for input again, allowing the user to enter new values. If the fields in the processing chain are only checked once, the PAI processing continues directly after the FIELD statement, and the preceding modules are not called again.
Look at the DEMO program DEMO_DYNPRO_FIELD_CHAIN.
ashish -
Data type selection Problem in ztable to use in the Module Pool Program
Dear Experts,
I have created a z-table which is used in Module Pool Program in which i have to save the information saved by the endusers in z-table. But the problem comming is that the amount of information saved by the endusers is so havey & our table is just limited for the 50 characters which is not sufficiet. So I urge you to please tell me what & which type of data type should I have to use to store maximum amount of information in our zt-able which is available in SAP ECC6.0.
Thanks & Regards,
AkgDear Akg,
u can resolve ur problem in following ways,
1. You can declare the field in a table without an Data element.
i.e. In the length field . using F4 help in length field how many characters u want u enter.
2. In the same u can search for an standard data element and use the same.
3. Creating an custom data element .
Reward if helps to u!!!
Regards,
MNR -
How to deactivate the screen fields dynamically in Module Pool Program?
Hi guys,
How to <b>activate & deactivate the screen fields</b> of a <b>module pool program</b>
<b>dynamically</b> through program. Like Change mode and display mode in a single
screen.Hi,
Make use of a Variable,say gv_flag, for both Activate and Deactivate functionalities. As many times you hit the same button, change this variable value. For example, let us say first time you hit this button, assign value 'X' to this variable. Second time you hit this button, assign value ' ' to this variable. In PBO based the variable value you have to Activate and Deactivate.
PBO.
if gv_flag = 'X'. " Activate
loop at screen.
if screen-fname = 'ITAB1-MATNR'.
screen-input = '1'.
modify screen.
endif.
endloop.
elseif gv_flag = ' '. " Deactivate
if screen-fname = 'ITAB1-MATNR'.
screen-input = '0'.
modify screen.
endif.
endloop.
endif.
PAI.
case sy-ucomm.
when 'ACDC'. " Activate/Deactivate
if gv_flag = 'X'.
gv_flag = ' '.
else.
gv_flag = 'X'.
endif.
endcase.
thanks,
sksingh -
Hi,
I have an input field which mapped to a context attribute of type Time. When I try to enter any value during runtime I have a small message in the bottom of my webpage ( Error during parse, please give a value in form 10:11:12 AM ). After that I should enter a good value otherwise I cannot do any other action.
Thanks,
YounesHallo Younes,
that's the purpose of implicit validation based on the dictionary type definition.
By default the format of the built-in type 'time' is "<b>hh:mm:ss a</b>" but you can easily change this format by defining your own simple data type. Name this local dictionary type <i>MyTime</i>, select the built-in type 'time' and then specifiy its <i>format</i> (tab 'Representation') via "<b>hh:mm</b>". In this case the generic validation will accept '12:10' as input field value.
For more details look at http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
Greetings, Bertram -
Validations on the screen fields in a module pool program
Hi all
i am creating a sales order against a purchase order ,i am selecting a PO click on a button to call another screen which has all the mandatory fields of the SO i want validations on the screen fields or the input fields as when i enter the header data and the items data and the partner data from the input serach help that is already enabled on the screen fields ,if there is any mismatch among the fileds and an error message is displayed for example:-" material no 100-100 does not exist for sales area" then only that field where this message is present should be field enabled and the rest of the fields should be field disabled.
also the error message i m displaying is in short text form and not in long text i clicked on it (long text) however how to use it was not known to me .
thanks
varun
Moderator message: please do more research before asking, try solving problems yourself first, look for previous discussions of similar issues, post texts in more readable format, you have been warned several times before.
Edited by: Thomas Zloch on Feb 7, 2012i want to have input search help as if i select sales document type then corresponding sales organizations should appear
This would be quite opposite of what h_vakz does. h_vakz gives Sales document based on Sales org..and you want vice versa. Create a simple SH with
selection method : TVAKZ
AUART as importing only
VKORG as exporting only. So when you enter an AUART you get all VKORG it is defined in. I'm not aware of a standard search help which matches the requirement. If anybody does please help me.
i have header data (only mandatory fields),items data,partner data(all mandatory fields)
and when i select all the header data the search help that is on the material number and partners role and number should appear corresponding to that header data
You will have to be more specific sir..
not able to apply please guide someone
As for that just mention them in SCREEN->ELEMENT LIST->REFERENCES -
How to pass the field value from module pool program to smartform using submit?
// AT pai of module pool pgm i entered the following: here gv_orderid is my value to be available at smart form(driver pgm) & zmusic_store_smf is the driver program of my smartform.
gv_orderid= wa-itemid./
SUBMIT ZMUSIC_STORE_SMF VIA SELECTION-SCREEN
WITH p_order = gv_orderid
AND RETURN.
//AT driver pgm(zmusic_store_smf):
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZMUSIC_SMARTFORM1'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = lv_form
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION lv_form
EXPORTING
* iv_orderid = is_purchase_item-zorder_id.
iv_orderid = gv_orderid.
// here i'm trying to call my smartform('ZMUSIC_SMARTFORM1') from this driver pgm but unable to access the value of gv_orderid please help me out with this.Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
i_input = gv_orderid
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5 -
Problem with list box in table control (Module pool) .
Hi,
I'm facing a problem while populating values in List Box..
While I'm clicking a value from the list box it is not being hold in that box...box got blanked.
Please help me to solve this.process before output.
module pop_drop_down.
module pop_drop_down output.
name1 = 'IO5'.
REFRESH list1.
LOOP AT it_zpoitshead INTO wa_zpoitshead.
value1-key = wa_zpoitshead-createdt.
value1-key = wa_zpoitshead-its_ebeln.
APPEND value1 to list1.
ENDLOOP.
CLEAR value1.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name1
values = list1
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule. " pop_drop_down OUTPUT -
Applying search help on the screen fields of a module pool program
hi all
i am creating a sales order against a purchase order i am stuck at applying the search helps
i have header data (only mandatory fields),items data,partner data(all mandatory fields)
i want to have input search help as if i select sales document type then corresponding sales organizations should appear and when i select all the header data the search help that is on the material number and partners role and number should appear corresponding to that header data
i found following search helps as:-
h_vakz and h_mvke
not able to apply please guide someone
thanks
varuni want to have input search help as if i select sales document type then corresponding sales organizations should appear
This would be quite opposite of what h_vakz does. h_vakz gives Sales document based on Sales org..and you want vice versa. Create a simple SH with
selection method : TVAKZ
AUART as importing only
VKORG as exporting only. So when you enter an AUART you get all VKORG it is defined in. I'm not aware of a standard search help which matches the requirement. If anybody does please help me.
i have header data (only mandatory fields),items data,partner data(all mandatory fields)
and when i select all the header data the search help that is on the material number and partners role and number should appear corresponding to that header data
You will have to be more specific sir..
not able to apply please guide someone
As for that just mention them in SCREEN->ELEMENT LIST->REFERENCES -
How to track changes to fields in a Module Pool Program
Hi Experts,
I have one requirement to track the changes to some fields used in the Program, The fields for tracking the changes will be maintained in a table T1, this will be changed dynamically.
There are many screens in the program and many fields in each screen.
1. How to do the coding for tracking the changes, the code should track all the changes to the fields maintained in the table T1.
Thanks in Advance.
BaburajHi Baburaj,
The table logging concept will helpful for this requirement.(Tcode: scu3 --> give table name --> u can find changes for all fields).
Make use of concept change documents (auditing purpose used) --> CDHDR,CDPOS tables.
If you want to track changes to your own program, You need write some API to store the data.
Regards
Bhupal Reddy -
Hi,
iam developing object on modulepool.
can u pls send examples objects on modulepools.
thankhi ,
Here you go ....
Creation of table controls in mpools
Here you go with the complete steps for creating module pool programs using table control:
open se51, choose the icon like a table for table control . drag it and then place it in your screen . click on F6 and you will get a screen where youi need to provide the table name / field name that ( fields ) you are going to use in the screen and table control. after giving the ztable name click on get it from dictionary . you will get the list of available fields in a table. next choose the fields you wish to place in the table control , and if you want to place all fields in your table control then select every fields . after this you will get a structure which you should drag place inside the table control area .
double click on the table control , set the proper attributes, tickmark the horizontal and vertical scroll bars to appear in your TC in the screen . save , check and activate ..
following are the sample code you should follow to display datas in your table control ..
write the following code in the flow logic of the screen ............
process before output.
module tc_01_init.
loop at g_tc_01_itab
into g_tc_01_wa
with control tc_01
cursor tc_01-current_line.
module tc_01_move.
module tc_01_get_lines.
endloop.
module status_0001.
process after input.
loop at g_tc_01_itab.
chain.
field sflight-carrid.
field sflight-connid.
field sflight-fldate.
module tc_01_modify on chain-request.
endchain.
endloop.
module tc_01_user_command.
Write the following code in your Zmodulepool program !!
program z_tst_mpool_tc_01.
data: begin of l_tab_sflight occurs 10,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
end of l_tab_sflight.
tables: sflight.
types: begin of t_tc_01,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
end of t_tc_01.
data: g_tc_01_itab type t_tc_01 occurs 0,
g_tc_01_wa type t_tc_01. "work area
data: g_tc_01_copied. "copy flag
controls: tc_01 type tableview using screen 0001.
data: g_tc_01_lines like sy-loopc.
data: ok_code like sy-ucomm.
include z_tst_mpool_tc_01_pbo .
include z_tst_mpool_tc_01_pai .
include z_tst_mpool_tc_01_incl01 .
include z_tst_mpool_tc_01_status_0001.
include Z_TST_MPOOL_TC_01_PBO .
inside include
module tc_01_init output.
if g_tc_01_copied is initial.
select * from sflight
into corresponding fields
of table g_tc_01_itab.
g_tc_01_copied = 'X'.
refresh control 'TC_01' from screen '0001'.
endif.
endmodule.
module tc_01_move output.
move-corresponding g_tc_01_wa to sflight.
endmodule.
module tc_01_get_lines output.
g_tc_01_lines = sy-loopc.
endmodule.
Revert if further assistance needed ...
Regards,
Ranjita -
Find which report invoke my module pool program
hi everyone,
I have a problem of finding which report calling my module pool program.
I have one module pool program and 5 reports. In all 5 reports i use
call transaction to fill up the screen values of that module pool program.
Now i have to change screen output depending upon the each report.
So i have to find out which report call my module pool program
Is there any possiblity to find out??? my client will not allow to use
SAP memory or ABAP memory.
Thanks in advance,
FlorianHi,
Check this system field. This is for procedures
sy-cprog - In procedures called externally, the name of the calling program, Otherwise the name of the current program. If a procedure called externally calls another external procedure, sy-cprog contains the name of the framework program, and is not set to the name of the framework program of the subsequent calling program.
may be this works. -
How to increase the field size in modules
Dear Oracle Team,
When we add some items in reason codes from the dictionary, it has certain limit in reason code and title. So I can increase those field size to add bigger text for title names.
I think it also applicable for the fields in other modules also. Looking your valuable support.
Thanks & Regards,
Sheik1. Once you add a custom field to your database, it would be made available to either your reports (BI) or your layouts in PCM.
2. When you create the custom field, you would specify the field length/type/properties. (i.e. "Char" field with 120 char field length) If you set this to one value when you create (say 120 char) and want to CHANGE it to 140 characters, you cannot do this without deleting and re-creating the custom field. I did check 14.0.3 and this continues in this version as well.
2a. Best practice is to be generous in your field sizes to avoid needing to change it later.
As I mentioned before, any default fields in the database are fixed to their set properties and the only way to change them is to submit an SR to Oracle to request the change. -
Problem with the quantity field
hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsiwhat about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.
Maybe you are looking for
-
How do I set up my pc with icloud
-
FCS on Macbook Pro moving to new Macbook Pro
Hi folks, I have FCS on a Macbook Pro. I am just about to sell this machine (have reformatted the drive)and wish to install FCS onto my new laptop. Is this going to cause me any problems ? Cheers, Message was edited by: sprintman
-
Hi Guys, I am really confused , if its a right section to post this question or not else moderator can suggest me the right section and will re-post Here is the question: 1. We are taking advantage of ECC CIC0 ( Customer Interaction Center ) function
-
I've loaded Roboform onto my SD drive. How do I merge it with Firefox?
-
Unable to view media on WSE2012 homepage.
When using remote web access, I can access machines and shared folders just fine. I get the error below however whenever trying to access any media. I had to manually configure the router, since it didn't take with WSE2012. This happens on both th