Data Uploading Error

Hi Seniors.
i am doing LSMW . in maintain source field i have maintained TITEL-C-15-Title(MR,MISS,MRS)
Now the issue is whne i go to maintain field mapping and conversion rules & do auto field mapping syatem is not generation
TITEL.Rest of the areas are workin.
Sstem is storing MR,MRS,MISS in Anrex-Adress Type.
Please guide on this.

Hi Rajiv
Data in your DEV system & PRD will differ. But update rule will be same in both the system. So i would suggest you to upload the data only to PSA first and try to check if there is any condition written in the update rule and then check if the data u uploaded to PSA has data which is not matching to the condition in update rule. The problem is at update rule level only, so got to check with update rule.
For eg There is a calculation done at update rule level to calculate time period by subtracting end date from start date. Now if there is a record with null end date or start date, then data will not get loaded to target.Then you can correct this data in PSA and then upload data manually to target.
I hope this example will help u.
Regards,
Rohini

Similar Messages

Data upload error during uploading data in catalogs ( CCM 2.0 )

Hi ,
I am having problem during upload of data into catalogs of CCM 2.0. I think there is some problem with my file. When i click "Upload Schema" it just upload schema not the data. But if i am removing schema from file it is giving me error.
Kindly if anyone can send me sample file for data upload in CCM 2.0 or steps to upload data correctly.
Thanks & Regards,
Kamal

Hi,
I don't understand very well, the standard characteristic for images is /CCM/PICTURE.
It's a complex characteristic composed by
/CCM/DESCRIPTION
/CCM/URL
/CCM/MIME_TYPE. (for example image/jpeg).
If your problems still exist, you can send me your file
Regards

Profit center and cost center master data upload errors

Hi Sapiens,
Could you please guide me to resolve the below errors in profit center and cost cost center master data upload through LSMW. i am usinng recording method for upload and getting below error while uploading the data from txt file.
1. Valid from and to dates are not converting in DDMMYYYY format, which field type we have to use in field mapping?
2. some of the fields data are overlapping when uploading the data.
3. How to create validation for empty cells data.
thank in advance.
regards,
jagadeesh.

Hi
when you are using LSMW for uploading PC & CC, simple way to correct the Error's WHILE RECORDING The First record, while Creating LSMW, B very care full while entering the details ,bez wht ever Fields your updating ..the same Fields get updated While LSMW Processed.
As mentioned above update the vaild from and to date in wht ever format you want While recording, in the same format all the remaining records gets updated..
Hope the suggections will Help you in solving your Issues.
Thanks
Goutam
Edited by: Goutam78 on Apr 29, 2011 8:59 PM

End User Data Upload - Error

Hi Friends,
Could you help me out with this:
I am trying to utillize the Data upload feature in Oracle APEX 4.2.
Procedure:
Create New Page > Data upload
I am giving a transformation here which checks for existing data. If data exists, the transformation updates the table else inserts. I am using the Merge command to execute this:
I am using a "PL SQL Function" here,
BEGIN
MERGE INTO DEPT TARGET
USING (SELECT :DEPTNO DEPTNO, :DNAME,:LOC FROM DUAL) SOURCE
ON (TARGET.DEPTNO = SOURCE.DEPTNO)
WHEN MATCHED THEN
UPDATE SET TARGET.DNAME = SOURCE.DNAME, TARGET.LOC=SOURCE.LOC
WHEN NOT MATCHED THEN
INSERT (TARGET.DEPTNO, TARGET.DNAME, TARGET.LOC) VALUES(SOURCE.DEPTNO, SOURCE.DNAME,SOURCE.LOC);
END;
It is a simple DEPT table which as 3 columns(DEPTNo, DNAME, LOC)
But it always throws me an error like
Sequence Action DEPTNO DNAME LOC
1 FAILED 52 EMPLOYEE MUMBAI
2 FAILED 61 TEST TEST
What is that i am doing wrong here. I have tried this before and it used to work earlier. But unfortunately it is not working now.
Your help would be appreciable.
Thank you,
Srikumar S
Edited by: Srikumar S on Mar 6, 2013 6:12 AM

Dear Arun,
Thank you very much for your quick answer.
You solved my question!
Regards,
Alfio

BW master data upload error..

Hi all.
Currently, Master data "OCOORDER attribute" was scheduled every morning.
However, this data hasn't been succeeded for two months.
After this data is running about 10 hours, I am receiving the following error message:
1. The attributes for characteristic 0COORDER are locked by a change run.
2. Error 1 in the update.
3. Lock NOT set for: Loading master data attributes.
We are using SAP BW 3.0.
In the monitor for Change Run program "RSDDS_CHANGERUN_MONITOR", even though this data wasn't successfully loaded,
it is showing following screen:
"Characteristics to be activated"
Did anyone of you have this problem before?

hi,
yes realignment run must have been executed after master data loading. you are right, realignment and master data can't be processed in the same time.
0COORDER master data should not take 8 hours, it's too long, normaly master data should be in mins.
if you are in bw 3.x, you may try to use process chain,
here you can arrange realignment after all master data finished upload.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0afcd90-0201-0010-b297-9184845346ca
hope this helps.

Data upload error in LSMW

Hi All,
I am uploading the data for 0169 (Savings Plans infotype).When i am trying to upload the data via LSMW , i am getting the error as " Beneficiary 1/01 not allowed" but for the same employee if i directly enter the details via PA30,i can able to enter the beneficiary details . Can you provide me the solution for making it upload in the data by means of LSMW.
Thanks
Yogesh

Hi
It seems that there is a problem in your file structure. Make sure the fields are in the right place with the right delimiters. Which method in LSMW you are using to upload? Is it through BAPI, IDOCs, Recordings?
Reward Points, if helpful.

Master data uploading error

We have prepared material master data file in the standard template which was provided by our Implementaion parter. Uploading is done through BDC , written by our partner.
The master data was uploaded , but when we compare the Uploaded data with the actual data file ( given in excel format) then we found out of 800 ( approx) records , 300 records were uploaded with wrong data in one particular column and rest of the column is correct.
For example : In data file values are as under
Ist Record
Column name   Value
Material code MCAPTX2345
Description     Capcitor
UOM              NO
old code         mc3345tyx
rate                2,74
Uploaded data :
Material code MCAPTX2345
Description     Capcitor
UOM              NO
old code         mc3345tyx
rate                2,74
this is OK.
IInd record:
Column name   Value
Material code RICMTX2345
Description     Resistor smd
UOM              NO
old code         rt*345tyx
rate                10,34
Uploaded data :
Material code RICMTX2345
Description      Resistor smd
UOM              NO
old code         rt*345tyx
rate                34,50
In scond record there is an error.
May you please help us to know that how the values are changed while uploading.
And what will be the best possible method to correct the wrong data of a particular column.
Will it be possible to write a BDC to modify the data of a particular column in the material master. As the information is correct.
thanks
harish
Edited by: harish aswani on Aug 15, 2008 9:57 AM

Hi Harish,
Please check your excle file. I was face the same problem. When i checked the file then in some lines start with space. After correction this issue when i upload again the upload is successfull.
Pls try it if you are facing same problem.
Anil

Flat file data upload error

Hello,
I am trying to load a flat file into a datasource. When I execute the infopackage, i am getting a lot of errors for diff fields in the datasource like this:
Error 'An exception with the type CX_SY_CONVERSION_NO_NUM' at conversion exit RSDS_CONVERT_NUMBER (field DATE_OF_BIRTH record 1, value 12/)
What does this mean and what do I have to do to load the data properly into the PSA?
Thanks.

Hi,
This may be due to following,
1. I guess you are using some Date data in your file. First check whether in your Datasource u have defined that field with correct data type( either Calday, calmonth...).
2. If you have declared correctly, check whther you are giving the data for Date in your file in correct format: Ex: 012007, 022008....
3. Check the sequence of the fields in your file and datasource, whether its correct or not.
rgrds,
v.sen

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Data Upload error!

Hi,
While uploading hierarchy from flat file, i got the following error:
'Syntax error in template RSTMPL9C, Row 80'
i checked the 80 th row in falt file, it is just normal as like any otehr record in flat file.
may i know what is this error and why it is appering?
Thanks,
Ravi

Hi,
i ignored 85 records in the number of header records to be ignored!
But still the problem is persisting!
and the preview function is grayed out even after checking several times!
Thanks,
Ravi

Data Uploaded Error in FB50

Hi All,
 I am using call Transaction method to upload data for FB50. The data is being populated into the bdcdata internal table. But the docuement is getting posted with only 2 line item entries. Where as the document contains 4 line item entries.
 Can anyone please help me out in this? I am attaching the code which i am using
LOOP AT it_data ASSIGNING <wa_data>.
 w_d = sy-tabix.
 W_TAB = SY-TABIX MOD 2.
 IF sy-tabix EQ 1 OR ( W_TAB NE 0 or w_y eq 'x' ) .
 get parameter id 'BUK' field w_bukrs.
 if w_bukrs is initial.
 set parameter id 'BUK' field w_bukrs_initial.
 perform bdc_dynpro using 'SAPLACHD' '1000'.
 perform bdc_field using 'BDC_CURSOR'
 'BKPF-BUKRS'.
 perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
 perform bdc_field using 'BKPF-BUKRS'
 <wa_data>-bukrs.
 write <wa_data>-budat to w_date.
 perform bdc_dynpro using 'SAPMF05A' '1001'.
 perform bdc_field using 'ACGL_HEAD-BLDAT'
 w_date.
 perform bdc_field using 'ACGL_HEAD-BUDAT'
 w_date.
 perform bdc_field using 'BDC_OKCODE'
 '/00'.
 else.
 PERFORM bdc_dynpro USING 'SAPMF05A' '1001'.
 WRITE <wa_data>-BUDAT TO W_DATE.
 PERFORM bdc_field USING 'ACGL_HEAD-BLDAT'
 W_DATE.
 PERFORM bdc_dynpro USING 'SAPMF05A' '1001'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'ACGL_HEAD-BLDAT'
 W_DATE.
 PERFORM bdc_field USING 'ACGL_HEAD-BUDAT'
 w_date.
Endif.
 PERFORM bdc_field USING 'ACGL_HEAD-WAERS'
 <wa_data>-WAERS.
 PERFORM bdc_field USING 'ACGL_HEAD-XBLNR'
 <wa_data>-xblnr.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ACGL_ITEM-ZUONR(01)'.
 PERFORM bdc_field USING 'ACGL_ITEM-HKONT(01)'
 <wa_data>-hkont.
 WRITE <WA_DATA>-wrbtr TO w_bdc_data .
 SHIFT w_bdc_data LEFT DELETING LEADING ' '.
 PERFORM bdc_field USING 'ACGL_ITEM-WRBTR(01)'
 w_bdc_data.
 PERFORM bdc_field USING 'ACGL_ITEM-TXJCD(01)'
 <wa_data>-txjcd.
 PERFORM bdc_field USING 'ACGL_ITEM-ZUONR(01)'
 <wa_data>-zuonr.
 PERFORM bdc_field USING 'ACGL_ITEM-SGTXT(01)'
 <wa_data>-sgtxt.
 PERFORM bdc_dynpro USING 'SAPMF05A' '1001'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=FIKP'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ACGL_ITEM-HKONT(02)'.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF05A-NEWKO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF05A-NEWBS'
 <wa_data>-bschl.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 <wa_data>-hkont.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-MEINS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
 WRITE <wa_data>-wrbtr TO w_amt .
 PERFORM bdc_field USING 'BSEG-WRBTR'
 w_amt.
 WRITE <wa_data>-menge TO w_bdc_data.
 SHIFT w_bdc_data LEFT DELETING LEADING ' '.
 PERFORM bdc_field USING 'BSEG-MENGE'
 w_bdc_data.
 PERFORM bdc_field USING 'BSEG-MEINS'
 <wa_data>-meins.
 WRITE <wa_data>-valut TO w_date.
 PERFORM bdc_field USING 'BSEG-VALUT'
 w_date.
 PERFORM bdc_field USING 'DKACB-FMORE'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-PRCTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-PRCTR'
 <wa_data>-prctr.
 ELSE.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF05A-NEWKO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'RF05A-NEWBS'
 <wa_data>-bschl.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 <wa_data>-hkont.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-MEINS'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
 WRITE <wa_data>-wrbtr TO w_amt .
 PERFORM bdc_field USING 'BSEG-WRBTR'
 w_amt.
 WRITE <wa_data>-menge TO w_bdc_data.
 SHIFT w_bdc_data LEFT DELETING LEADING ' '.
 PERFORM bdc_field USING 'BSEG-MENGE'
 w_bdc_data.
 PERFORM bdc_field USING 'BSEG-MEINS'
 <wa_data>-meins.
 CLEAR W_DATE.
 WRITE <wa_data>-valut TO w_date.
 PERFORM bdc_field USING 'BSEG-VALUT'
 w_date.
 PERFORM bdc_field USING 'DKACB-FMORE'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-PRCTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-PRCTR'
 <wa_data>-prctr.
 ENDIF.
 w_x = w_d mod 998.
 IF w_x EQ 0 or w_ln eq w_d.
 w_y = 'X'.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-WRBTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 <wa_data>-wrbtr.
 PERFORM bdc_field USING 'BSEG-MENGE'
 <wa_data>-menge.
 PERFORM bdc_field USING 'BSEG-MEINS'
 <wa_data>-meins.
 CLEAR W_DATE.
 WRITE <wa_data>-valut TO w_date.
 PERFORM bdc_field USING 'BSEG-VALUT'
 W_DATE.
 PERFORM bdc_field USING 'DKACB-FMORE'
 'X'.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-GSBER'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-PRCTR'
 <wa_data>-prctr.
 CALL TRANSACTION 'FB50' USING IT_BDCDATA
 MODE 'A'
 UPDATE 'S'
 MESSAGES INTO IT_MESGTAB.
 ENDIF.
ENDLOOP.

Check out the message coming in the IT_MESSTAB.
I suggest you to use the RFBIBL00 to post FI documnents, if possible.
You can read the documentaion of RFBIBL00 for more information.
Regards,
Naimesh Patel

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

What will the error in calltransactionprogram in dat upload?

hi all
what will the error in calltransaction program in dat upload, when that flat file field are not match with the ,internel table fields. what are the common errors occured errors while data uploading by using calltransaction methodfor a transaction.

if you declare internal table as like quantity field then you will get short dump so you have declare internal table field as like char type.
and if you mentioned wrong field name with respect screen field then you get valid error message state that
field name is not input field.
Thanks
Seshu

Uploading CSV using browse item ( getting no data found error )

Hi,
i am using below procedure to upload CSV into my table.
CSV is having null values in some places ex: 1,
2,0.999
3,
4,0.696
below procedure working fine when i am uploading CSV like : 1,0
2,0.999
3,0
4,0.696.
My table is having only two columns, and i am getting no data found error when uploading null values CSV file.
I went through Import data in excel to database table but no use..
Please help me on this.
Procedure
===========
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data from wwv_flow_files
where UPDATED_BY = (select max(UPDATED_BY) from wwv_flow_files where UPDATED_BY = :APP_USER)
AND id = (select max(id) from wwv_flow_files where updated_by = :APP_USER);
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities
v_line := substr(v_line, 1, length(v_line)-2);
 v_line := REPLACE (v_line, ',', ':');
-- Convert each column separated by : into array of data
 v_data_array := wwv_flow_utilities.STRING_to_table (v_line);
-- Insert data into target table
 EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
 values (:1,:2)'
 USING
 v_data_array(1),
 v_data_array(2);
 -- Clear out
 v_line := NULL;
END IF;
END LOOP;
END;regards
Chandran
Edited by: Chandran on Sep 26, 2012 10:52 AM
Edited by: Chandran on Sep 26, 2012 10:25 PM
Edited by: Chandran on Sep 27, 2012 1:58 AM

Chandran,
You can use wwv_flow_utilities.array_element to avoid no_data_found error. The function does not raise errors. So, for the line which only have one array value when you expect 2, it may be useful.
EXECUTE IMMEDIATE 'insert into table_name@Schema1 (col1,col2)
 values (:1,:2)'
 USING
 wwv_flow_utilities.array_element(v_data_array,1),
 wwv_flow_utilities.array_element(v_data_array,2);Regards,
Christina

What are the general errors will come in data uploading

Hi Friends,
What are the general errors will come in data uploading
Thanks in Advance

Paul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat

Data Uploading Error

Similar Messages

Maybe you are looking for