Data used

Ok. I have a question.....I talked to 3 different people at Verizon last night and got 3 different answers. My husband and I both have the Iphone 4. When sending an Imessage to him from my phone or vise versa.....is data used????

Yes, iMessage uses data.

Similar Messages

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Can we load data using .xls in user define format(without using default template)

Hi All,
I'm new bee to FDM. Part of HFM support i use FDM to load flatfile data. Just has a bit more knowledge than end user.
Requirement is that i need to load data from MS excel to Planning application via FDM.
Previously application is in Excel(Macro driven) and upstream(data) is also in Excel(multi tab).
As of my knowledge data can be loaded from .csv file(Excel save as CSV) with single tab.
Could you please let me know possibilities to load data from .xls(.xlsx) to FDM.
Thanks in advance.

If you want to load data using Excel, utilising FDM's out-of-the-box functionality you will have to use one of the templates supplied i.e. Excel Trial Balance or Excel Multi-load template.

Data Federator not fetching data USING Netweaver BI Connector

Hi Gurus,
We have upgraded the BW system to use the Data federator.
callback ID that SAP NetWeaver BI uses to contact Data Federator has been configured as mentioned in guide.
we have already configured the CONNECTOR and we are able to test the connection in DF Designer and the connection is successful. i am able to see the list of fact tables and i am saving the data source and making it final and deployying my project .
i am using the jdbc connection and data federator strategy and the strategy is also creating the joins and classed automatically. when i export my universe and try to create the webintelligence report i am unable to see the data .even when i execute with one object and one keyfigure it is same .
even when i test my data source in designer to view the data using query tester tool it is also not able show the data it takes huge time and no data getting retrieved .
i would appreciate if you could help me with this issue
Regards and thanks
Abid

Hi,
Which version of Data Federator are you using ? Direct access to ECC table is not yet supported using Data Federator.
Jean-Pierre

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

I am trying to restore my old Macbook Pro data using Time Machine on a new Mackbook Air from external hard drive, but when I install I get two different loggin accounts and I only want one loggin account

I am trying to restore my old Macbook Pro data using Time Machine to a new Macbook Air from an external hard drive, but when I restore I get two diferrent loggin accounts and I only wnat one loggin account to access all my data/files?

This web site might answer all of your Time machine questions:
http://pondini.org/OSX/Home.html
Ciao.

Unable to load CSV data using APEX Data Load using Firefox/Safari on a MAC

I have APEX installed on a Windows XP machine connected to an 11g database on the same Windows XP machine.
While on the windows XP, using IE 7, I am able to successfully load a CSV spreadsheet of data using the APEX Data Load utility.
However, if I switch to my MacBook Pro running OS X leopard, then login into same APEX machine using Firefox 2 or 3 or Safari 3, then try to upload CSV data, it fails on the "Table Properties" step when it asks you for the name of the new table and then asks you to set table properties, the table properties just never appear (they do appear in IE 7 on Windows XP) and if you try to hit the NEXT button, you get error message: "1 error has occurred. At least one column must be specified to include in new table." and of course, you can't specify the any of the columns because there is nothing under SET TABLE PROPERTIES in the interface.
I also tried to load data with Firefox 2, Firefox 3 (beta), and Safari 3.1, but get same failed result on all three. If I return to the Windows XP machine and use IE 7.0, Data Load works just fine. I work in an ALL MAC environment, it was difficult to get a windows machine into my workplace, and all my end users will be using MACs. There is no current version of IE for the MAC, so I have to use Firefox or Safari.
Is there some option in Firefox or Safari that I can turn on so this Data Load feature will work on the MAC?
Thanks for your help. Any assistance appreciated.
Tony

I managed to get this to work by saving the CSV file as Windows CSV (not DOS CSV), which allowed the CSV data to be read by Oracle running on Windows XP. I think the problem had to do with different character sets being used for CSV on MAC versus CSV on Windows. Maybe if I had created my windows XP Oracle database with Unicode as the default character set, I never would have experienced this problem.

Newbie: stopping attachments and monitoring data use of account

Just got an iPhone 3GS and have managed to set it up all fine and sync with itunes. Had a Touch before so all ok on that score. I'm sycning with Mobile Me and with iTunes.
However, I have some questions that I can't find in the manual;
I have a phone account with 250mb data a month, which I guess isn't much, and I only really want to use the iPhone for mail when I'm out and about. However, I've been receiving emails where-ever I am. Where do I find the setting to switch on email via the phone network on and off?
I also assume its possible to set the mail account so that only the message, or a part of it comes through so I can limit my data use. How do I do this?
Is there any way I can monitor my phone, text and data use so I don't exceed my phone tariff?

I installed an email account using the POP option and couldn't stop attachments downloading.
when I made this account inactive and installed a new mail account using IMAP option it then gave the option to manually download anything over about 300KB. this is the link from my isp that helped me:
http://www.netregistry.com.au/support/kb/questions.php?questionid=386
step 7 is where you select the IMAP option.
hopefully you are given that option by your ISP/email provider.
Message was edited by: toger

Any Standard FM for material stocks on posting date using Tcode MB5B

Hi,
I need   Standard FM to get material stocks on posting date using   Tcode   :   MB5B
Stock type i am using is : Storage Location/Batch Stock
the Input   i am providing is    Material, Plant , Storage Location, selection date From , selecDate To.
Then   i need to get data that it provides   header and document item level.
Can u please tel me how do i get that material stock data on posting date and in which tables
it will be populated in the database.
ITs required can u take view and post info
Thanks & Regards
sivakumar kasa
Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

hi Rehan,
I have checked all settings also enhancement but there is no as such control to restrict backposting within current period
I think its self disipline action not to post backdated GI when GR is done on later date
Vishal...

Restful service unable to insert data using PL/SQL.

Hi all,
Am running: AL 2.01 standalone mode on OEL 4.8 in VM box A.
Oracle database 10.2.0.4 with Apex 4.2.0.00.27 on OEL4.8 in VM box B.
Able to performed oracle.example.hr Restful services with no problem.
Unable to insert data using AL 2.0.1 but works on AL 1.1.4.
which uses the following table (under schema: scott):
create table json_demo ( title varchar2(20), description varchar2(1000) );
grant all on json_demo to apex_public_user; and below procedure ( scott's schema ):
CREATE OR REPLACE
PROCEDURE post(
    p_url     IN VARCHAR2,
    p_message IN VARCHAR2,
    p_response OUT VARCHAR2)
IS
l_end_loop BOOLEAN := false;
l_http_req utl_http.req;
l_http_resp utl_http.resp;
l_buffer CLOB;
l_data       VARCHAR2(20000);
C_USER_AGENT CONSTANT VARCHAR2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
BEGIN
-- source: http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
utl_http.set_response_error_check(false);
-- Begin the post request
l_http_req := utl_http.begin_request (p_url, 'POST', utl_http.HTTP_VERSION_1_1);
-- Set the HTTP request headers
utl_http.set_header(l_http_req, 'User-Agent', C_USER_AGENT);
utl_http.set_header(l_http_req, 'content-type', 'application/json;charset=UTF-8');
utl_http.set_header(l_http_req, 'content-length', LENGTH(p_message));
-- Write the data to the body of the HTTP request
utl_http.write_text(l_http_req, p_message);
-- Process the request and get the response.
l_http_resp := utl_http.get_response (l_http_req);
dbms_output.put_line ('status code: ' || l_http_resp.status_code);
dbms_output.put_line ('reason phrase: ' || l_http_resp.reason_phrase);
LOOP
    EXIT
WHEN l_end_loop;
    BEGIN
      utl_http.read_line(l_http_resp, l_buffer, true);
      IF(l_buffer IS NOT NULL AND (LENGTH(l_buffer)>0)) THEN
        l_data    := l_data||l_buffer;
      END IF;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
      l_end_loop := true;
    END;
END LOOP;
dbms_output.put_line(l_data);
p_response:= l_data;
-- Look for client-side error and report it.
IF (l_http_resp.status_code >= 400) AND (l_http_resp.status_code <= 499) THEN
    dbms_output.put_line('Check the URL.');
    utl_http.end_response(l_http_resp);
    -- Look for server-side error and report it.
elsif (l_http_resp.status_code >= 500) AND (l_http_resp.status_code <= 599) THEN
    dbms_output.put_line('Check if the Web site is up.');
    utl_http.end_response(l_http_resp);
    RETURN;
END IF;
utl_http.end_response (l_http_resp);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line (sqlerrm);
raise;
END; and executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585/apex/demo';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
anonymous block completed
status code: 200
reason phrase: OK
with data inserted. Setup using 2.0.1
   Workspace : wsdemo
RESTful Service Module: demo/
          URI Template:      test
                Method: POST
           Source Type: PL/SQLand executing in sqldeveloper 3.2.20.09 when connecting directly to box B as scott:
SET serveroutput ON
DECLARE
l_url      VARCHAR2(200)   :='http://MY_IP:8585//apex/wsdemo/demo/test';
l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
l_response VARCHAR2(30000);
BEGIN
post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;which resulted in :
status code: 500
reason phrase: Internal Server Error
Listener's log:
Request Path passes syntax validation
Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=WSDEMO, _failed=false, _lastUpdate=1364313600000, _template=/wsdemo/, _type=BASE_PATH]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
demo/test matches: demo/test score: 0
Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
Tenant Principal already established, cannot dispatch
Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST demo/test
demo/test is a public resource
Using generator: oracle.dbtools.rt.plsql.AnonymousBlockGenerator
Performing JDBC request as: SCOTT
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: Error occurred during execution of: [CALL, begin
insert into scott.json_demo values(/*in:title*/?,/*in:description*/?);
end;, [title, in, class oracle.dbtools.common.stmt.UnknownParameterType], [description, in, class oracle.dbtools.common.stmt.UnknownParameterType]]with values: [thetitle, thedescription]
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
java.sql.SQLException: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:205)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1043)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4755)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
        at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
        at oracle.ucp.jdbc.proxy.CallableStatementProxyFactory.invoke(CallableStatementProxyFactory.java:101)
        at $Proxy46.execute(Unknown Source)
        at oracle.dbtools.common.jdbc.JDBCCallImpl.execute(JDBCCallImpl.java:44)
        at oracle.dbtools.rt.plsql.AnonymousBlockGenerator.generate(AnonymousBlockGenerator.java:176)
        at oracle.dbtools.rt.resource.templates.v2.ResourceTemplatesDispatcher$HttpResourceGenerator.response(ResourceTemplatesDispatcher.java:309)
        at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:88)
        at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:412)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:162)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
        at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:65)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
        at java.lang.Thread.run(Thread.java:662)
Error during evaluation of resource template: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-idPlease advise.
Regards
Zack

Zack.L wrote:
Hi Andy,
Sorry, forgot to post the Source that's use by both AL1.1.4 and AL2.0.1.
Source
begin
insert into scott.json_demo values(:title,:description);
end;
it's failing during the insert?
Yes, it failed during insert using AL2.0.1.
So the above statement produces the following error message:
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted delimited-idThis suggests to me that an unprintable character (notice how there is nothing between the double quotes - "") has worked its way into your PL/SQL Handler. Note how the error is reported to be a column 74 on line 2, yet line 2 of the above block should only have 58 characters, so at a pure guess somehow there's extra whitespace on line 2, that is confusing the PL/SQL compiler, I suggest re-typing the PL/SQL handler manually and seeing if that cures the problem.

Warning Messages when extracting Time Management Data using 0HR_PT_1,2

Hi,
When extracting data using 0HR_PT_1 and 0HR_PT_2 extractors it comes up with the following errors and warnings even if the records in the source system are correct.
"No Personel Work Schedule for personnel number XXXXXXX" and
"Personnel number XXXXXXX could not be locked".
Did any one of you face the same issue? If so, please do let me know how to fix these!
Thanks,
Ajay

Hi Ajay
To my knowledge this is caused because there are locks on registrations for these employees in R/3, probably because there using the system at the time of extraction.
To my knowledge the only way to handle this is to set "yellow" status to "green" this can be done automaticly on the InfoPackage.
I know this problem from two companies and i have not experienced any inconsistancies on data due to this proceeding.
Chris

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How to cut off data use on a line in a family share plan?

Is there a way to cut off data useage on one line in a family share plan? I have one person that is going over and want to simply cut off the data use after she reaches say 110% of her use in the billing cycle.

I agree get Family Base and charge then the extra $5 it will cost since that person doesn't seem to understand the concept of SHARING. Or up the data plan and charge the extra to them and tell them since you had to increase the data plan because them they can pay the extra mount.

How to get current navigation data using C#

Hi,
Please help me to get the current navigation data using c#.
In detail, In my sharepoint 2013 site, if i navigate to the Site Actions -> Settings ->Navigation -> Current Naviation and add some link it should show on my web part.
I am trying to create a new web part and this web part should show the content of Current Navigation (under settings).
Thanks in advance.

Hi Lakshmanan,
Thanks for your reply.
I need more CSS customization so i am looking for C# code and i got the code. i am getting all the subsites but child nodes of subsites are showing zero even though the subsites having another subsites and pages.
I have tried the below scranario,
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.navigation.spnavigation.quicklaunch.aspx
Please help me on this. This is very urgent for me.
Thanks a ton.

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones. How is this data useful to him

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones that he wants to know information about. How is my data useful to him and can he restore this data on another iPhone and run it parallel to mine? I have had people send me messages which I have not received. These have been screen shot to me later including time and I have just not got them. I had 4 weeks worth of messages go missing from my phone..I know that he synced my phone because his work laptops I'd came up in my settings. Also if the above can be done can he change the settings on my actual phone and access my location without placing tracking software on my phone. Can someone please help here as I can't restore a backup to my phone for obvious reasons and refuse to change my number because of this loser.

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

Data used

Similar Messages

Maybe you are looking for