Quantity not updated in Asset master after Good Receipts

Hi,
Can someone tell me is it SAP bug after Good Receipts done, base on the following scenarios, if PO specify with Quantity 1 and unit of measurement PC:
1) Asset created without specifiying the quantity and unit of measurement
2) Asset created with specifiying the quantity and unit of measurement, ie Quantity : 1, Unit of measurement: PC
3)  Asset created with specifiying the quantity and wrong unit of measurement, ie Quantity : 1, Unit of measurement: Unit
The result:
Item1: No quantity and unit of measurement in Asset Master was updated.
Item2: Quantity was added by 1, ie total is 2 in Asset Master
Item3: No changed in Asset Master, since wrong unit of measurement.
Is it bug for the item1 & Item2?
Thanks

Refer the note 421308
Regards
Sreenivas

Similar Messages

  • Deactivation date is not updating in Asset Master after retirement (ABAON)

    Dear Experts,
    Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation).  Below is the asset and class:
    Asset name:  Maruti Baleno
    Asset Class: Vehicles
    Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
    When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
    Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
    Thanks,
    Francis.J

    Dear Atif Farooq,
    In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
    200     Retirement without revenue
    210     Retirement with revenue
    When am trying to update manually below error appearing in AS02
    Deactivation not possible. Dep.area 15 has acquisition values
    Message no. AA296
    Diagnosis
    You cannot deactivate, since acquisition values are still present in depreciation area 15.
    Procedure
    Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
    The above asset procured in the year of 2009 and same has been retired 2009.
    Thanks,
    Francis J

  • Creation of Asset Master in Goods Receipt

    Dear All,
    Is there any possiblities to create Asset Master during Goods Receipt Process.  The Scenarios is the user did not want to create Asset Code during or before creation of Purchaes Order and we need the system to create the Asset with Sub number in Goods Receipt.
    Please help.
    Regards,
    Suresh

    Hi
    I dont think there is a possibility, you need to give true account assignment in creation of PO.
    Thanks

  • Quantity field updated in asset master

    Hi,
    We are facing one problem when we are settling the WBS elements to AuC the settlement process is running fine but the original quantity mentioned in the asset master gets change after the settlement. to some X figure.
    kindly help me to solve the problem, as it is not possible to go and edit the manually 100's of Asset master.
    Points assured.
    regards,
    Anand Datta

    Refer the note 421308
    Regards
    Sreenivas

  • No. of containers not updating in QALS table from goods receipt

    Hi all,
    I am working on below requirement for client.
    I am releasing a process order and then saving it. With this, an inspection lot is created in QALS table automatically.
    Then I am doing Goods receipt through MIGO.
    While doing goods receipt, I am entering no. of containers in quantity tab on item level (GOITEM-ANZGEB), but the same is not getting updated in QALS table (QALS-ANZGEB).
    Is there any configuration setting needs to be done to activate the update of no. of containers in QALS table from MIGO transaction?
    P.S. - Sometimes we use MB31 also to do goods receipt. In that also, there is no. of containers field.
    Thanks in advance,
    Sachin

    Hi Sachin,
    what is the solution for this .? Can you explain?
    Ram

  • Outbound Delivery IDOC not updating values from MKPF for goods receipt

    hi all,
    I have a question say I am generating an outbound delivery IDOC. which  has fields Goods Issues & Goods Receipt date retrieve from MKPF(BUDAT).
    say when i post goods issues, MKPF is updated and  IDOC is gernerated with issues date taken from MKPF.
    and when i tried to goods receipt, MKPf is updated and IDOC is generated but no receipt date taken from MKPF. then i check in MKPF, date is there and then once again I triggered the IDOC, receipt date comes......so my doubt is the time issues say when IDOC is triggeres, no value in MKPF...but when i check the time it is 4 mins difference from the MKPF time and the IDOC time...
    and also 1 more thing for doing goods receipt, we do in different transaction and for good issue we do in Vl02n.
    so bit confused.
    kindly help

    True , but in BKPF only Issues date are stored not the receipt date say if the document type = WE.
    Please let me know is there any other options to fetch rather than MKPF.
    because at the time of IDOC generation, there is not entries in MKPF. I tried to do using WAIT UP TO 50 seconds , even that didnt work.
    Please guide me
    thanks

  • Quantity field not getting update in PCA document for Goods Receipt

    We have the Purchase Account activated for our company code.
    For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
    But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
    Please advice whether I am missing something.
    Regards
    B.Mohanty

    Hi Aravind,
    Check SAP notes  1063198 and 1117587.
    FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
    relevant in this case. This is clearly explained in the note 1063198.
    The quantity posts through to FI on the 'goods receipt' items, but not on the
    'invoice receipt' items.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    But in the old 'Profit Center Accounting' and the old' Special Ledger'
    the field has been important.
    As the same logic of these areas to 'store' the Quantity is also used
    in the NewG/L the field get only filled in the line, where it make
    'sense' from our point of view, because only in the 'goods receipt'
    lines a 'real' Quantity is posted to the system.
    So as before in the PCA and SL, now also in the NewG/L the Quantity is
    filled in the correct and important lines and postings.
    In the BSEG ('old document segment table') the field is filled 'just'
    as it is send to the FI, but this is not completely correct from the
    business point of view.
    This can also lead to issues with the reporting and summation to this
    field. So with creating the new logic in the NewG/L the 'correct'
    standard of the 'writing' for the Quantity has also been taken over.
    So in the end, the update and display is correct according  SAP standard behavior.
    Actually,Quantities within G/L are never reliable,
    because the purpose of FI is a view on the data according to amount
    but not according to quantity.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    I hope I could be of assistance.
    Regards,
    Fernando

  • One issue regarding update open Qty. of PO in PP/DS after goods receipt through interface.

    Dear experts:
    We are implementing APO-PP/DS integrated with Non-SAP ERP system, as the standard CIF can’t be used between ERP and APO, we have to use BAPI to transfer data.
    Now we are facing a problem, after final confirmation & goods receipt of production order in ERP, the open quantity of production order should be updated in PP/DS, but we can’t find any BAPI can help on this.
    We’ve tried BAPI_MOSRVAPS_CONFHEADMULTI and BAPI_MOSRVAPS_CONFOPRMULTI for production order confirmation, but failed, as SAP said, confirmation without goods receipt will not update the order open quantity. We also tried BAPI_MOSRVAPS_SAVEMULTI3 to change the receipt quantity, but failed, as after partial confirmation, the quantity of production order can’t be changed, but we can’t find a field of “open quantity” (open quantity = total quantity – delivery quantity) in the BAPI. So how can we update the open quantity of production order in PP/DS after goods receipt from ERP?
    Appreciate for your input, thanks.
    Regards
    Kevin

    Dear Uli
    Thanks for your information, we tried it again according to your
    instruction via Function module /SAPAPO/CIF_ORDER_INBOUND, but failed.
    For import parameters:
    OBJECTTYPE = 6
    LOGSYS = “Our logical system”
    The screenshot is as following:
    In the IT_OUT table:
    ORDNR = “Production order number in our ERP system”
    ORDERGUID = “Internal order number of this production order in
    APO” (we also tried to keep this field blank)
    METHOD = C
    GR_QUANTITY = 2
    The screenshot is as following:
    The ET_RETURN has no response
    And nothing gets update in product view.
    Is there anything wrong in my parameters?
    Thanks & Regards
    Kevin
    Best Regards

  • Equipment master record updation in Asset master record

    Dear Friends,
    I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
    But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
    Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
    Thanks,
    Dwarak.

    Hi,
    Thanks a lot for your reply.
    I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
    And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
    Thanks
    Dwarak.

  • Possible to Update ERS indicator on PO after Goods Receipt

    He all,
    We had failed to update the ERS settings in the plant data view of the vendor master purchasing data. We have about 1000 PO that were supposed to be paid through ERS but are now not invoiced. Is it possible to set the ERS Indicator after Goods Receipt?
    Thanks,
    Justin

    You can change the Purchasing Group on the Org. Data tab in the PO header in ME22N.  If you have PO release strategies they will not be reset unless PGrp is a characteristic in your release strategies and you change PGrp to a value outside of the range the strategy is using.
    Also, in your system you may not be able to change the PGrp if the screen layout changes the field to display once a GR is posted.  You can see this in the document type field selection or "Define Screen Layout at Document Level".  If the PO release strategies are used, you may need to check the changeability setting for the Release ID.
    Hope this helps.
    Edited by: Paul Shrewsbury on Apr 4, 2011 3:06 PM

  • Price updation in Material Master after confirmation

    Dear Gurus,
    When we create a production order for Semi finished which is maintained with Moving Average Price(MAP) in material master and we do confirmation of the order with "CO15'.
    My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
    Regards
    RAM

    Hi,
    I think this cant be done.
    > My client wants after goods receipts against 101 movement type the price should be up date in Material; Master immediately.
    How much MAP should be after GR? From where this value will come?
    The accounting entries are passed on the basis of price maintained in the material master. The MAP is the input to the business activity. So as per my understanding the MAP cant be updated with GR against a production order.
    Also, the costing run would update the standard price, and wont be helpful as the indicator would be 'V' in material master.
    Hope it clears.
    Regards,
    Rohit.

  • AA Depreciation area created but not appear in asset master

    Hi you all!
    I need to make a Depreciation area (which is a derived one - diffference between two others) visible in asset master data. I have tried but unfortunately I could not solve this.
    Dep area is created and visible in reports only  but it does not appear in Asset master.
    Can someone help me?
    Regards,

    Further to update:
    In OADB, you need to mention it as "Derived Depreciation Area".
    You need to give the depreciation sign.
    For example if you have 01 as Current Values, 02 as Historic Values, you can create 03 as derived depreciation area.
    That means 03 is the resultant of 01 minus 02.
    03 = 01 -02
    Please refer 1144500 and download the configuration notes to see how the derived depreciation areas are being created. This note is particularly for SORP requirements within UK for Public Sector Undertakings. You cannot us this configuration for countries / industries.

  • Acquisition value not updated in Asset Accounting... however updated in GL

    Hi Friends,
    Please provide me a solution for the following problem.
    In asset 220000144 of Co.Code B403 , acquisition value is not updated with asset transaction for Rs.279352.00 , and as a result it shows difference in AA/FI reconciliation .
    Could anyone suggest a solution to resolve this mismatch?
    Urgent !!
    Rgds,
    Prasad

    Hi Ashok,
    This is not from the legacy system. This has originated via MIGO transaction.
    Rgds,
    Prasad

  • Update Material availability after goods receipt

    Hello Experts,
    Configured the system to send an email to MRP when a missing part in a Production order Received.
    Now the problem is, How to remove the Missing parts flag from the Pick list ( or How to update the Material availbilty at Goods receipt? ).
    Thanks for your help in advance.
    Govind.

    Mario,
    Thanks for your response.
    We have the ATP mass processing background job scheduled. But thats is running by period value. I am looking for something which updates after the GR Posted. ( Event based ) and should run only for the part no or Oder received.
    Do you have any suggesstions?
    Thanks
    Govnd.

  • Plan Price for GR item not updating from mt. master,but taking sum of GI it

    Hello
    I am using a MTS scenario with 10 strategy. The price in the production order cost analysis view for GR item is not updating with material master price, but it is updating with a sum total price of the materials for GI in the production order. The price control for header GR item is 'S' and for all GI items it is 'V'.
    How to get the price from the material master for the GR item (order header item)?
    Thanks,
    Abhi.

    Check costing variants assigned for planned and actulas in order types ( u can see costing variants in production with CO03 in control tab).
    Check the valuation variant for which priorities given like std price, average price etc.,
    Please note that while confirming the production order the GR will happened based on the strategy given in valuation variant and it will take from material master.
    I think in your valuation variant "average price" has given higher priority and average price existed in your material master.
    System won't sum up all raw material costs and put it into GR, unless otherwise any user exit given.
    regs,
    ramesh b

Maybe you are looking for