Data written to Live cache but not visible in SNP Planning Book

Hello All,
We have an issue this morning, Customer service cordinator placed a Purchase Order in SNP (VMI). Order was sent to ECC and a sales order was created. This morning when we check the sales order, it shows 4574 cases but in TLB Pur chase order, it only some 2000 something. I went to OM16 and checked the sales order and it had the entire 4574 cases written in the live cache. Any help on how to get the entire quantity to be seen is appreciated. Thank you.
Regards,
Rohit.

Hi Ada,
Thanks for the reply. The issue got resolved by itself.
Regards,
Rohit.

Similar Messages

Data available in RRP3 view but not coming in SNP planning book

Hi All,
I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
I ran LC Cons check, PA cons check, OM17, but still the same result.
Any pointer would be highly valuable.
Regards,
Manotosh Bhattacharya

Hi
If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
Regards
Ian

Demand on VC material not visible in SNP planning book

Hi Experts,
Is there any way to plan VC (Variant Configuration ) materials in SNP at the group level ?
I will explain the scenario more in details below
I have an VC material say X. Material X has end product Y attached to it (material variant). When material X is cifed to APO, it appears as configurable product in APO & is a top level product. Now when I create a demand on material X through DP, the demand appears in product view (RRP3). However the demand does not appear in the SNP planning book nor it gets selected during background planning run. The system is configured as Variant Configuration & not CDP.
Is it possible to plan material X in SNP ? If possible how can the demand be read in SNP ?
Thanks in advance
Regards
Sandeep

Hi Sandeep,
One of the limitations of Characteristics Based Forecasting is, CBF results can only be used in PPDS and not in SNP, hence it is not possible to plan that material X in SNP. Even though you use MC90 transaction which is release DP to SNP, but the data will not be available in SNP
That material X will be planned only in PPDS, there are two ways to plan, those are
1. one way is by releasing CBF results to active version using MC90 transaction, during this release, you should maintain consumption group in release settings and in product master, in this case you have to use Forecast Check/Allocation check as a part of ATP/GATP, here you can not use CTP or MATP
2.the other way is by releasing CBF results to inactive version using MC90 transaction, during this release you should not define consumption groups, generate the dependent requirements in inactive verison using heuristics in PPDS , and convert dependent requirements from inactive version to Forecast - active version using /SAPAPO/DMP2 transaction, in this case you can use MATP/CTP as a part of GATP
-Deepak

Process orders not reflecting in SNP planning book

Hi,
I am facing a problem here that the SNP planned orders once converted into process orders in ECC are not reflecting in the SNP planning book.
However if i check the /sapapo/rrp3 product view, the process orders are visible here.
Kindly help me understand if i am missing out something here.
Thanks,
Nalin

Hi,
Please Check whether the ATP category is assigned to the Category group which is assigned to KF in the planning.
If that is assigned rightly then run TS cons check.
Regards,
Kishore Reddy.

Custom attributes added to user objects not visible in OWA address book

Hi,
I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
Thanks!

Hi Abu,
Please see following link:
Customize Details Templates
http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
My understanding is this setting only visible in Outlook.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Stock not in SNP Planning Book

Hi
We are doing a global implementation and we have seen the issue where stock exists in live cache, and is correctly considered in SNP Heuristics, but the stock on hand is not displayed in the SNP planning book.
This is NOT an issue with the stock category, as the same stock category is displayed for Poland and the UK locations.
This is leading me to think this might be a time zone issue?
What possible reasons can people think of where stock of the CC category is in live cache but not displayed in the SNP planning book. But another plant location is performing correctly for CC stock.
S SB

I have answered my own issue. The stock on hand macro is initial stock + Receipts - Demands.
Deployment is running in the evening and pushing out the stock, the day rolls over to the next day and then the deployment STR demand is considered history and as per the above formula is netting off the stock.
This is a symptom of running the SNP run in the evening, not at 00.01am. (Deployment STRs of stock are instantly in the past) which then affects the stock on hand balance.
Hope that is clear to anyone else having this issue.
Simon.

Data fetch from live cache

How can I retrieve data from live cache?This is in Demand Planning : SCM APO.
Please suggest ways.
Thanks & Regards,
Savitha

Hi,
some time ago I worked on SAP APO.
To read live cache, you first have to open a SIM session.
You can do this as shown in this function module:
FUNCTION ZS_SIMSESSION_GET.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(IV_SIMID) TYPE /SAPAPO/VRSIOID
*" EXPORTING
*"     REFERENCE(EV_SIMSESSION) TYPE /SAPAPO/OM_SIMSESSION
CONSTANTS:
lc_simsession_new       TYPE c LENGTH 1 VALUE 'N'.
DATA:
lt_rc                   TYPE /sapapo/om_lc_rc_tab,
lv_simsession           LIKE ev_simsession.
IF NOT ev_simsession IS INITIAL.
    EXIT.
ENDIF.
*--> create Simsession
CALL FUNCTION 'GUID_CREATE'
    IMPORTING
      ev_guid_22 = lv_simsession.
*--> create transactional simulation
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion            = iv_simid
      iv_simsession            = lv_simsession
      iv_simsession_method     = lc_simsession_new
      iv_perform_commit        = space
    IMPORTING
      et_rc                    = lt_rc
    EXCEPTIONS
      lc_connect_failed        = 1
      lc_com_error             = 2
      lc_appl_error            = 3
      multi_tasim_registration = 4.
IF sy-subrc > 0.
    CLEAR ev_simsession.
*   error can be found in lt_rc
ENDIF.
* return simsession
ev_simsession = lv_simsession.
ENDFUNCTION.
Then you can access the live cache.
In this case we read an order (if I rememver correctly, it's a plan order):
DATA:
lv_vrsioid                  TYPE /sapapo/vrsioid,
lv_simsession           TYPE /sapapo/om_simsession.
* Get vrsioid
CALL FUNCTION '/SAPAPO/DM_VRSIOEX_GET_VRSIOID'
    EXPORTING
      i_vrsioex_fld = '000' "By default
    IMPORTING
      e_vrsioid_fld = lv_vrsioid
    EXCEPTIONS
      not_found     = 1
      OTHERS        = 2.
CALL FUNCTION 'ZS_SIMSESSION_GET'
      EXPORTING
        iv_simid      = iv_vrsioid
      IMPORTING
        ev_simsession = lv_simsession.
CALL FUNCTION '/SAPAPO/RRP_LC_ORDER_GET_DATA'
    EXPORTING
      iv_order      = iv_orderid
      iv_simversion = iv_vrsioid
    IMPORTING
      et_outputs    = lt_outputs
      et_inputs     = lt_inputs.
If you change something in your simsession, you have to merge it back afterwards, so that your changes become effective.
You can do this like that:
* Merge simulation version (to commit order changes)
CALL FUNCTION '/SAPAPO/TSIM_SIMULATION_CONTRL'
    EXPORTING
      iv_simversion                = lv_vrsioid
      iv_simsession                = lv_simsession
      iv_simsession_method         = 'M'
    EXCEPTIONS
      lc_connect_failed            = 1
      lc_com_error                 = 2
      lc_appl_error                = 3
      multi_tasim_registration     = 4
      target_deleted_saveas_failed = 5
      OTHERS                       = 6.
I hope this helps...

Adobe form-Able to post data using Adobe Reader 9 but not with Adobe Proff

Hello Guru's
I am facing one problem with adobe forms.
We have develoed a adobe form using adobe reader 9.
Now when user are posting the purchase requistion using the form,they are able to post the data using
Adobe Reader 9 but not with Adobe Reader professional.
Can anyone please advice me what can be the problem here.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Data appears in the tree but not in the display

Post Author: TheBig1980s
CA Forum: General
Hello:
When I print data for one month, data appears in both the Preview tree and the Preview display. When I print the data for another month, the data does show in the Preview tree but not in the Preview display.
Forgetting the tables the report is pulling from, forgetting which month is which, etc., why (in any case) would Crystal show data in the Preview tree but not show that same data in the Preview display? That makes no sense. I wish I could just take my mouse and just drag the tree onto the displayu2026..
I have nothing suppressed. This is Crystal 9.
Thanks!
TheBig1980s

Post Author: SKodidine
CA Forum: General
I encounter this in CR XI once in a while. What I found from my research, if I have a group and then I have certain conditions to either display or eliminate the data selected for whatever reason then the group tree will show the group and since the data is eliminated by either the select criteria or another way there is no data displayed.
Try this. In the second month where you see the data in the tree but on the report, see if you can narrow it down further by day and see if you can find the reason why.

Form created but not visible!!

Form created but not visible!!
Hi everyBody,
I've created 2 user Forms binded with a 2 user tables (with diffrent UDOs) and everything works perfectly. When I tried to run it on a machine at a customer, the first form functions perfectly and the second one is created but does not appear!!!,
I am lost!!
Is there a problem of SQL Server 2005?!
Is it because of the nature of the machine (server or client machine)?
Is there a problem of configuration (Operating System)? I'm using Windows XP but the other machine is using Windows 2000.
would somebody have an idea or suggestion?
Thank you in advance

HI Haifa,
When the second form opens (but doesn't appear on screen) choose Windows--Cascade from the top menu. Sometimes a form will open outside the viewable area in the SBO client so choosing this menu option will reset it.
Kind Regards,
Owen

My Javascript works in Dreamweaver Live View, But Not On The Server

I set up a javascript function to set the focus to the first field in a form as the page loads. It works fine in Dreamweaver's Live View, but not on the local or remote servers. Here's the code:
In the heading I have the following function:
<script type="text/javascript">
function setFocus()
document.getElementById("firstname").focus();
</script>
In the <head tag, I have:
<body onload="setFocus()" ...
and the first field in the form is:
            <input name="firstname" type="text" id="firstname" style="text-align: center; color: #009; text-transform: capitalize; font-variant: normal; font-weight: bold; line-height: normal; font-style: normal; font-size: 14px; font-family: Arial, Helvetica, sans-serif;" tabindex="1" value="<?php echo $fstname; ?>" size="15" maxlength="20">
I guess I must be missing something, but don't know what.

EUREKA! (and OOOPPPPSS!) I found the problem (and I thought javascript was case sensitive - according to the tutorial, it's supposed to be).
Here's apparently wha hoppen. The first field in the form is the person's first name, but it's also a SPRY validation field. I gave the actual field the name and id of "firstname", and the SPRY validation the name "FirstName", figuring that scripts would be case sensitive. In fact, when I first inserted the SPRY object, I tried to name it "firstname" also, but it wouldn't let me, so I capitalized the first letters, and it accepted that; that made me feel that this is OK. Here's the entire field's code:          <label>First Name:
           <span id="FirstName">
            <input name="fstname" type="text" id="fstname" style="text-align: center; color: #009; text-transform: capitalize; font-variant: normal; font-weight: bold; line-height: normal; font-style: normal; font-size: 14px; font-family: Arial, Helvetica, sans-serif;" tabindex="1" value="<?php echo $fstname; ?>" size="15" maxlength="20">
            <span class="textfieldRequiredMsg">A value is required.</span><span class="textfieldMinCharsMsg">Minimum number of characters not met.</span></span></label>
I accidentally tripped over the answer when I started using the Dreamweaver's Edit>Find Next search to see if I had something else named "firstname", and I found that it located every permutation of that word (e.g. firstname, FirstName, FIRSTNAME etc.). Having seen that, I tried changing the "name=" and "id=" to "fstname, and the same corresponding change in the javascript, and VOILA! it worked. That leaves me rather curious about this alleged "case sensitivity" thing. I get the impression that it IS case sensitive, except when IT'S NOT. How does this work, and how do I know when it is and isn't?

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

Data Table module enabled script is not visible in Oracle Test Manager

Hi,
Data Table module enabled script is not visible in Oracle Test Manager (OTM)
Steps to reproduce:
1.     Create new script (Oracle EBS/Forms)
2.     Enable Data Table module (Script--->Script Properties-->Modules) and save.
3.     Try to add the script in Oracle Test Manager.
Environment details:
Windows 7
OATS Version: 12.1.0.2 Build 58
IE 9
Thanks
-Pops

Hi Deepu,
I'm trying to add Data Table enabled script in Oracle Test Manager.
Data Table Module enable script is not visible in OTM.
In OATS 12.3, also i'm facing the same issue.
Thanks,
POPS

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

Data written to Live cache but not visible in SNP Planning Book

Similar Messages

Maybe you are looking for