Database backup problem in DB13
Dear All,
<b>When we take backup from the command prompt using Brbackup or Brarchive it executes the backup process successfully, but when I schedule the same thing in the DBA calendar it shows that job finished but it actually does not take the backup. I have given all parameter required for the backup in the DBA calendar like eg, the scheduled time, the tape generic name, archive type.</b>
Can anybody guide what is going wrong ...because of that I am not able to schedule backup using DB13 tcode.
At present I am using Brtools( Brbackup) to take the backup.
Thanks in adv.
Bhaskar
Dear Mr. Fidel,
Thanks for your reply.
My operating system is Windows 2003.
I am loged in with <SID>adm.
When I use DB13 to schedule the backup (online full database backup) it completes sucussfully......but if I choose to schedule backup(online full database + redo logs file) after taking backup of the database when it to take redo logs file give an error message as:-----
<b>I am giving lines where the error occurs...</b>
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.19
BR0063I 43 of 43 files processed - 120279.500 MB of 120279.500 MB done
BR0204I Percentage done: 100.00%, estimated end time: 19:32
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.23
BR0340I Switching to next online redo log file for database instance MRP ...
BR0321I Switch to next online redo log file for database instance MRP successful
BR0117I ARCHIVE LOG LIST after backup for database instance MRP
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination F:\oracle\MRP\oraarch\MRParch
Archive format ARC%S_%R.%T
Oldest online log sequence 3173
Next log sequence to archive 3176
Current log sequence 3176 SCN: 33992945
Database block size 8192 Thread: 1
BR0018I Waiting for the next offline redo log file...
BR0017E Offline redo log file E:\oracle\MRP\102\RDBMS\ARC03175_0603728372.001 not found
BR0056I End of database backup: bdvoqpkp.ant 2007-06-27 19.32.28
BR0280I BRBACKUP time stamp: 2007-06-27 19.32.28
BR0054I BRBACKUP terminated with errors
thanks.
Similar Messages
-
Dear Team,
I am using HP-UX with Oracle. When I am doing Full Online backup via db13 . It give error
BR0428W File /oracle/PRD/sapreorg/sr3700.data11.Z will be overwritten
BR0202I Saving /oracle/PRD/sapreorg/sr3.data1.Z
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C dd obs=128k bs=128k if=/oracle/PRD/sapreorg/sr3.data1.Z of=/dev/rmt/0mn':
1190+0 records in
1189+1 records out
I/O error
BR0280I BRBACKUP time stamp: 2009-07-15 03.12.35
BR0279E Return code from 'LANG=C dd obs=128k bs=128k if=/oracle/PRD/sapreorg/sr3.data1.Z of=/dev/rmt/0mn': 2
BR0222E Copying /oracle/PRD/sapreorg/sr3.data1.Z to/from /dev/rmt/0mn failed due to previous errors
BR0280I BRBACKUP time stamp: 2009-07-15 03.12.37
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bebadoop.fnt 2009-07-15 03.12.35
But archive log is working fine.
RajHi,
What is the pathc level of BR*Tools. Check if this Note 994136 - Backup to hard disk fails with error BR0278E SAP note helps you.
I/O error
Also check OS logs.
Thanks
Sushil -
Dear Team ,
During Full Online backup . I am facing the problem . The BRBACKUP Detail Log is
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdzbskui.fnt 2008-10-21 09.42.40
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0280I BRBACKUP time stamp: 2008-10-21 09.42.41
BR0301E SQL error -1587 at location BrCtlCopy-1, SQL statement:
'/* BRBACKUP */ ALTER DATABASE BACKUP CONTROLFILE TO '/oracle/PRD/sapbackup/cntrlPRD.dbf''
ORA-01587: error during control file backup file copy
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
HPUX-ia64 Error: 2: No such file or directory
Additional information: 4
Additional information: 195
Additional information: 417792
BR0320E Copying of control file to /oracle/PRD/sapbackup/cntrlPRD.dbf failed
BR0314E Collection of information on database files failed
BR0056I End of database backup: bdzbskui.fnt 2008-10-21 09.42.41
BR0280I BRBACKUP time stamp: 2008-10-21 09.42.41
BR0054I BRBACKUP terminated with errors
please help
manuone active control file is enough for database to run, you can do copy/paste on line, but make sure that what you do. make sure that all the control files are in same in size.
i suggest you make a copy of existing control file and then perform copy.
For example the control files details:
SQL> show parameter control_files;
NAME TYPE VALUE
control_files string /oracle/PRD/sapdata1/cntrl/cntrlPRD.dbf,
/oracle/PRD/sapdata2/cntrl/cntrlPRD.dbf,
/oracle/PRD/saparch/cntrl/cntrlPRD.dbf
cheers,
-Sunil -
Full Database Backup in DB13 for MS SQL Server databases
Hello,
We have some SAP systems using the MS SQL Server database. I want to know if it is possible to setup the Full Database Backup option in transaction DB13 to store the files in a hard disk space.
I already did this type of configuration in SAP systems in Oracle databases and for this I used the init<SID>.sap where we can put all the configuration, for instance the disk path where we want to save the backup files! But for MS SQL Server databases, in DB13, I don´t know how to do that, when I add the "Full Database Backup" option in DB13, this show me some options but only for tape, but I don´t want to store the backup files in tapes, I want to store/save the files on the server disk itself or else to an external disk but I don´t see where I can set this way of storage!
This is what you see in DB13 (when using a MS SQL Server database) in "Full Database Backup" and as you see I only have options for TAPE not for a disk or other type of storage! How can I do that? (if that is possible):
Can you help me please?
Kind regards,
samid raifHello Raja
Sorry for the delay of my answer! Many thanks for that tip, it helps a lot and it solve the last error/problem that I reported here, in fact, the problem was we had named the device with two words containing a space. So we removed that space from the backup device (in SQL management studio) with one word only and the job runs successfully without any errors!
It works in Development and Quality systems but in our Production system (AM1) the Full backup option in DB13 stopped with the following error, in fact the error is on verification of backup, it means that the Full backup finished with success, but when it does the backup verification, the job in DB13 stops with an error, the following one:
***************************** SQL Job information ******************************
Jobname: SAP CCMS Full DB Backup of AM1 [20140417103726-4-103726]
Type: TSQL
DB-Name: AM1
For Run: 20140417 10:37:26
**************************** Job history information *****************************
Stepname: CCMS-step 1
Command: declare @exeStmt nvarchar(2000) exec am1.sap_backup_databases @dbList=
"AM1",@r3Db="AM1",@bDev="fullprd",@expDays= 27,@jobName= "SAP CCMS Ful
l DB Backup of AM1 [20140417103726-4-103726]",@bkupChecksum="Y",@bkupT
ype="F",@nativeBkup="N",@exeDate = "20140417103726",@bkupSim = "N",@fo
rmat = 0,@init = 0,@bkupDb = "AM1",@unload = 0,@exeStmt = @exeStmt OUT
PUT
Status: (success)
Message: 3014
Severity: 0
Duration: 4 hours(s) 41 min(s) 22 sec(s)
Last msg: Executed as user: am1. Processed 7434328 pages for database 'AM1', fil
e 'A01DATA1' on file 1. [SQLSTATE 01000] (Message 4035) Processed 315
1504 pages for database 'AM1', file 'A01DATA2' on file 1. [SQLSTATE 01
000] (Message 4035) Processed 4574152 pages for database 'AM1', file
'A01DATA3' on file 1. [SQLSTATE 01000] (Message 4035) Processed 44363
92 pages for database 'AM1', file 'A01DATA4' on file 1. [SQLSTATE 0100
0] (Message 4035) Processed 25598 pages for database 'AM1', file 'A01
LOG1' on file 1. [SQLSTATE 01000] (Message 4035) BACKUP DATABASE succ
essfully processed 19621974 pages in 16881.638 seconds (9.521 MB/sec).
[SQLSTATE 01000] (Message 3014). The step succeeded.
<------------- End of Job Step History --------------->
Stepname: CCMS-step 2
Command: declare @exeStmt nvarchar(2000) exec am1.sap_verify_backups @nativeBku
p = "N",@bkupSim = "N",@bDev = "fullprd",@bkupChecksum = "Y",@exeDate
= "20140417103726",@unload = 1,@dbCnt =1,@exeStmt = @exeStmt OUTPUT
Status: (failure)
Message: 3201
Severity: 16
Duration: 0 hours(s) 8 min(s) 30 sec(s)
Last msg: Executed as user: am1. Cannot open backup device 'fullprd(\\10.0.0.45\
backupsap\prd\prdfullqua.bak)'. Operating system error 1265(error not
found). [SQLSTATE 42000] (Error 3201). The step failed.
<------------- End of Job Step History --------------->
**************************** Job history information *****************************
Can you help me please with this one!? Can you tell me why in verification it stops with that error?
Kind regards,
samid raif -
Db backup failure with DB13 for whole database offline backup
Dear experts,
I found a problem after using DB13 for whole database offline backup,it prompt the following error information :
BR0143I Backup type: offline_force
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2008-09-06 22.03.32
BR0307I Shutting down database instance DEV ...
BR0278E Command output of '/sapdev/oracle/DEV/102_64/bin/sqlplus':
SQL*Plus: Release 10.2.0.2.0 - Production on Sat Sep 6 22:03:33 2008
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> Connected.
SQL> csh: The file access permissions do not allow the specified action.
SQL> ORA-01013: user requested cancel of current operation
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
BR0280I BRBACKUP time stamp: 2008-09-06 23.03.40
BR0279E Return code from '/sapdev/oracle/DEV/102_64/bin/sqlplus': 0
BR0302E SQLPLUS call for database instance DEV failed
BR0309E Shutdown of database instance DEV failed
BR0056I End of database backup: bdythfth.aff 2008-09-06 23.03.40
BR0280I BRBACKUP time stamp: 2008-09-06 23.03.40
BR0054I BRBACKUP terminated with errors
i have checked the file mode in the directory of sapbackup and it seem no problem.please help me to analyze it,thanks.Hi,
If you are using oracle database than you can take backup using brtools(online or offline). login as user <sid>adm & run brtools command at command prompt.Than you will get a menu driven screen .
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
select option 4(Backup & database copy)
than you get the following screen
Backup and database copy
1 = Database backup
2 - Archivelog backup
3 - Database copy
4 - Non-database backup
5 - Backup of database disk backup
6 - Verification of database backup
7 - Verification of archivelog backup
8 - Additional functions
9 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
select 8(Additional functions)
you get the following screen
Additional functions for backup and copy
1 = Update of compression rates
2 - Preparation of RMAN backups
3 - Deletion of database disk backups
4 - Deletion of archivelog disk backups
5 - Controlling of BRARCHIVE run
6 - Initialization of BRBACKUP tape volumes
7 - Initialization of BRARCHIVE tape volumes
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
select option 6(Initialization of BRBACKUP tape volumes)
than u get the following screen
Options for initialization of BRBACKUP tape volumes
1 - BRBACKUP profile (profile) ....... http://initPRD.sap
2 - Initialization type (initialize) . rename
3 ~ Number of volumes (number) ....... []
4 - Confirmation mode (confirm) ...... yes
5 - Message language (language) ...... [E]
6 ~ Tape volume names (volume) ....... PRDB01
7 - BRBACKUP command line (command) .. http://-p initPRD.sap -i -l E -v PRDB01
choose option 2 & put force & enter
than choose 6 give tape name which one you define in init<sid>.sap file
than press "c"
press "c" to initialize the tape
After that go back to main menu
Backup and database copy
1 = Database backup
2 - Archivelog backup
3 - Database copy
4 - Non-database backup
5 - Backup of database disk backup
6 - Verification of database backup
7 - Verification of archivelog backup
8 - Additional functions
9 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
chose option 1
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... http://initPRD.sap
2 - Backup device type (device) ...... tape
3 ~ Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [/]
6 - Backup type (type) ............... offline_force
7 - Disk backup for backup (backup) .. no
8 # Delete disk backup (delete) ...... no
9 ~ Files for backup (mode) .......... all
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
chose option 3
give the tape volume name (Ex -PRDB01)
tahn c & c&c &c backup will start
Let me know If you have any query related to backup.
Karan -
Database backup restore problem
This question was asked in Setember but was not answered and is now archived.
I'm using final cut server 1.1.1 on snow leopard Server.
i can not restore my backup file(XXXXXX.zip)
below is the error display....
Checking for other backup processes...
Checking backup archive...
No errors detected in /XXXXX.zip for the 2 files tested.
Checking backup version against current installed version ...
Got version info. Backup file SourceVersion: 10336, Current SourceVersion: 10336
Stopping the server...
Restoring database support files...
Initializing a new database...
Restoring postgresql.conf ...
Restoring database from backup file '/XXXXX.zip'...
Restore failed: unzip exited with code 81. <---- what is code 81 ????
what's the problem ????? anyone help me...
I have substituted XXXXX for the name of my backup file
I really need some help here. My database was lost and I need to restore the backup. We have a lot of hours of cataloguing and metatagging in there!
thanksHello Everyone,
I haven't solved the problem, but I have found the root of it. The short answer is DO NOT RUN FINAL CUT SERVER 1.1.1 ON A MACHINE WITH SNOW LEOPARD SERVER!!!
I finally realized through a long and painful process of trying to restore our database, rolling back to Leopard server, upgrading again to Snow Leopard Server, and going back again to Leopard Server, that ALL of our database backups created after the Snow Leopard Server upgrade cannot be restored in FCServer 1.1.1. I don't know if FCServer 1.5 will read them, and I'm not about to spend the money to find out.
I'm really disappointed here. Apple does say that FCServer 1.5 is the compatible version to run with Snow Leopard server, but they certainly don't warn of the disaster that could occur if you try to run FCserver 1.1.1 with Snow Leopard Server.
Right now I'm trying to figure out how to extract the data from hundreds of items that have been entered so that we don't have to re-enter them all again.
So again, be warned. If you are upgrading to Snow Leopard Server, upgrade your FCServer too. At least I hope that's all it takes. For our part, we're back to Leopard Server and staying there for a while.
Regards,
Wayne Giesbrecht
Senior Media Developer
University of Saskatchewan -
DB13 Full Database Backup - Error
Hello Everybody,
Got this error with DB13 Full Database Backup.
2006-05-28 07:20:13.92 spid91 BackupMedium::ReportIoError: read failure on backup device '
ERB-HQ-BK2\SAPBK\DVE.BAK'.
Operating system error 59(An unexpected network error occurred.).
2006-05-28 07:20:13.93 spid91 Internal I/O request 0x0000000089028080: Op: Read, pBuffer: 0x00000000069D0000, Size: 65536, Position: 111032779264, UMS: Internal: 0x89029FE8, InternalHigh: 0x89028140, Offset: 0xDA11C200, OffsetHigh: 0x19, m_buf: 0x00000
000069D0000, m_len: 65536, m_actualBytes: 0, m_errcode: 59, BackupFile:
ERB-HQ-BK2\SAPBK\DVE.BAK
Best Regards.
DarwinDarwin,
Seems like the system is not recognizing your backup device. Have you verified that it installed/configured properly. -
Send database backup logs (DB13) to administrator e-mail
Hello,
I want to know if there is an automated way to periodically send the database backup logs (those shown in DB13) to an e-mail.
Does anybody know how to do this?
Thanks for your help.
Regards.Hello,
I am not sure if your admin would want to recieve the logs irrespective if the backup was successfull or not, because the log can be huge one at times.
Also,
Its better to have the status emailed instead of entire log files.
so for example if the backup log has some warnings, then a yellow alert is sent.
or if it has failed a RED alert is sent.
The administrator can then investigate the cause of yellow and green alerts.
Check the following note:
SAP Note Number: 746193 - RZ20: Generating all-clears ("green alerts")
Regards,
Siddhesh -
Online Backup Failed from DB13, brbackup runs on application server
Hi Everone,
I am getting problem when i am scheduling Online Backup from DB13 t-code.
Backup gets failed because logical command BRBACKUP execute on our Application server host rather than DBCI server host.
I have pest the lob logs below:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000389, user ID BASIS)
Execute logical command BRBACKUP On host xyzapp - (Application server)
Parameters:-u / -jid ALLOG20110824210000 -c force -t online -m all -p initSEP.sap -a -c force -p initSEP.sap -s
d
BR0051I BRBACKUP 7.00 (40)
BR0252E Function fopen() failed for '/oracle/client/10x_64/instantclient/dbs/initSEP.sap' at location BrInitSapRead-1
BR0253E errno 2: No such file or directory
BR0159E Error reading BR*Tools profile /oracle/client/10x_64/instantclient/dbs/initSEP.sap
BR0280I BRBACKUP time stamp: 2011-09-02 21.01.09
BR0301E SQL error -12545 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-12545: Connect failed because target host or object does not exist
BR0310E Connect to database instance SEP failed
BR0056I End of database backup: begroqyn.log 2011-09-02 21.01.09
BR0280I BRBACKUP time stamp: 2011-09-02 21.01.09
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Please help.
Thanks,
OceanHello
The previous contributor is correct, the profile is usually read from ORACLE_HOME. I have never seen this error linking to the Oracle client directory, please double check the following
Ensure that your envirionment variables are correctly set ORACLE_HOME, DIR_LIBRARY
Brtools are always installed on the DB server and can be called from any application server. if you are scheduling from DB13 on the application server, what is the connection setup? RSH, RFC, standalone gateway?
If using a standalone gateway, it must be installed on the DB server, please refer to oss notes #446172, #1025707
Best Regards
Rachel -
Online Backup Problems - DOA Error
Hi all!
I tried to establish an online backup for one of my Testservers. I configured the init<SID>.ora in the same way as the file is configured on an other Server (Backup works fine there).
In addition I adapted the parameter-file.
Are there any other configurations have to be done?
The Backup should be performed by an other Server.
The Backuputility (BAckupExec 10) allready starts the BAckupJob but this Job fails (without any Error -> I canceled the job after 30 Minutes without writing data...)
I planned the Job in DB13 - attached the second PArt of the Log!
Perhaps somebody can give me a hint to solve the Problem!
Would be great to solve that,
Alex
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.12
BR0057I Backup of database: RTS
BR0058I BRBACKUP action ID: bdrjxmye
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: D:\oracle\RTS\sapbackup\cntrlRTS.dbf
BR0061I 10 files found for backup, total size 10446.469 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file_online
BR0109I Files will be saved by backup utility
BR0142I Files will be switched to backup status during the backup
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.12
BR0229I Calling backup utility with function 'backup'...
BR0278I Command output of 'D:\usr\sap\RTS\SYS\exe\run\backint.exe -u RTS -f backup -i D:\oracle\RTS\sapbackup\.bdrjxmye.lst -t file_online -p D:\usr\sap\RTS\sys\exe\run\testparam.ini -c':
<b>DAO error: 8676593, 800a0be3
3043, DAO.DbEngine, Disk or network error.</b>
BR0232E 0 of 10 files saved by backup utility
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.13
BR0231E Backup utility call failed
BR0056I End of database backup: bdrjxmye.anf 2005-11-29 10.28.13
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.16
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.16
BR0291I BRARCHIVE will be started with options '-U -d util_file -c force -p initRTS.sap -cds'
BR0280I BRBACKUP time stamp: 2005-11-29 10.28.18
BR0292I Execution of BRARCHIVE finished with return code 5Hi,
Check below threads.
BRbackup problem on new system
Offline backup failed with BR0253E errno 13: Permission denied
BR0268E Asynchronous execution of program interrupted, exit status: c000009
Thanks,
Sushil
Edited by: Sushil Suryawanshi on May 28, 2009 8:16 PM -
Backup failed by DB13 & brtools both
Hi gurus,
I am trying to full database Backup Online, yesterday I was started it by using brtools but it was stoped after complition of 67%
Error is :
BR0801I BRCONNECT 7.00 (18)
PID=5216
BR0312E Database instance ECD shutdown during online backup
BR0280I BRCONNECT time stamp: 2008-07-31 19.26.24
#SIGNAL SENT: 22
Now today I m trying to start backup again & failed by both DB13 as well as brtools with same error
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdymldsi.ant 2008-08-01 14.08.24
BR0477I Oracle pfile D:\oracle\ECD\102\database\initECD.ora created from spfile D:\oracle\ECD\102\database\spfileECD.ora
BR0280I BRBACKUP time stamp: 2008-08-01 14.08.27
BR0319I Control file copy created: F:\oracle\ECD\sapbackup\CNTRLECD.DBF 13844480
BR0328E Database file F:\ORACLE\ECD\SAPDATA1\SR3700_1\SR3700.DATA1 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA1\SR3700_2\SR3700.DATA2 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA1\SR3700_3\SR3700.DATA3 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA1\SR3700_4\SR3700.DATA4 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA2\SR3700_5\SR3700.DATA5 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA2\SR3700_6\SR3700.DATA6 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA2\SR3700_7\SR3700.DATA7 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA2\SR3700_8\SR3700.DATA8 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA3\SR3700_9\SR3700.DATA9 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA3\SR3700_10\SR3700.DATA10 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA3\SR3700_11\SR3700.DATA11 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA3\SR3700_12\SR3700.DATA12 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA4\SR3700_13\SR3700.DATA13 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA4\SR3700_14\SR3700.DATA14 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA4\SR3700_15\SR3700.DATA15 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file F:\ORACLE\ECD\SAPDATA4\SR3700_16\SR3700.DATA16 of tablespace PSAPSR3700 is already in backup status
BR0056I End of database backup: bdymldsi.ant 2008-08-01 14.08.27
BR0280I BRBACKUP time stamp: 2008-08-01 14.08.28
BR0054I BRBACKUP terminated with errors
I checked to reset program status in brtools but same error found again.
Thanks & Best Regards,
Darshan..Hi,
check backup problem
regards,
kaushal -
MaxDB backup problem through Data protector
When I start the Online MaxDB database backup through Data Protector GUI the backup fails with error as below,
Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:30:49 AM
OB2BAR application on "ttcmaxdr" successfully started.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `user_logon'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_1 OB2OPTS=""'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_2 OB2APPNAME=MAX'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_3 OB2BARHOSTNAME=ttcmaxdr'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_4 TimeoutWaitFiles=30'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `dbm_configset -raw BSI_ENV /var/opt/omni/tmp/MAX.bsi_env'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `medium_put BACKDP-Data[2]/2 /var/opt/omni/tmp/MAX.BACKDP-Data[2].2 PIPE DATA 0 8'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `util_connect'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `backup_start BACKDP-Data[2] DATA'.
[Critical] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:31:45
Error: SAPDB responded with:
-24988,ERR_SQL: SQL error
-903,Host file I/O error
3,Data backup failed
17,Servertask Info: because Error in backup task occured
10,Job 2 (Backup / Restore Medium Task) [executing] WaitingT170 Result=3700
6,Error in backup task occured, Error code 3700 "hostfile_error"
1,Backupmedium #1 (/var/opt/omni/tmp/MAX.BACKDP-Data[2].1) Wrong file type
6,Backup error occured, Error code 3700 "hostfile_error"
17,Servertask Info: because Error in backup task occured
10,Job 1 (Backup / Restore Medium Task) [executing] WaitingT170 Result=3700
6,Error in backup task occured, Error code 3700 "hostfile_error"
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:31:45
Executing the dbmcli command: `exit'.
[Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
OB2BAR application on "ttcmaxdr" disconnected.
[Critical] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
None of the Disk Agents completed successfully.
Session has failed.
[Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
Backup Statistics:
Session Queuing Time (hours) 0.00
Completed Disk Agents ........ 0
Failed Disk Agents ........... 0
Aborted Disk Agents .......... 0
Disk Agents Total ........... 0
========================================
Completed Media Agents ....... 0
Failed Media Agents .......... 0
Aborted Media Agents ......... 0
Media Agents Total .......... 0
========================================
Mbytes Total ................. 0 MB
Used Media Total ............. 0
Disk Agent Errors Total ...... 0
But I have noticed the error is because of this line as below,
Executing the dbmcli command: `medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8'.
Actually it should execute the dbmcli command as
medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8 NO NO \" \" "BACK"
But I donu2019t know where to make changes so that when I start the backup through DP GUI it should use backup tool as u201CBACKu201D
But same DP backup specification is working through MaxDB Database Manager GUI.
Any solution appreciatedu2026
Thanks,
SubbaHi Natalia,
Thanks for the reply...Please find the answer as below,
-> What is the version of Data Protector?
Data Protector 5.5
-> What is the version of the database?
SAP MaxDB 7.6
-> According your information you could use the DBMGUI to create the medium of u201CBACKu201D type and create the databackup using this medium. Correct?
Yes
The problems are with Data Protector GUI, not with MAXDB or DBMGUI. Correct?
Yes
Please let me know where to make any changes or any enviornment settings to be done in Data Protector GUI so that it will use the medium "BACK" as backup tool while i start the backup through Data Protector GUI.
Thanks,
Subba -
DBACockpit Configuration - Remote Database backup of Java Stack.
Hi All,
I am configuring remote database backup of my SAP Java stack system.
I have successfully connected the system in dbacockpit. I have gateway installed also on the remote host system. but Database scheduling on DB13 failed.
On the OS of CEN system, I can connect to the host system of the remote using the OPS$ logon and i.e
sqlplus /@SID as sysdba - (It connected, to confirm i querried the v$instance I was also able to shutdown the remote system)
E:\>sqlplus /@SID as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed May 18 15:37:46 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
But when I ran the brtools to perform the backup I got this error.
"BR0301W SQL error -12560 at location BrDbConnect-2, SQL statement:Hi Niyi,
This is a TNS error. The system is not able to connect TNS by using br*tools.
Firstly, check your environment variables. They should be as same as java system environmnt variables.
Secondly, check the link below;
[BR0301W SQL error -1017;
You need to create a synonym and SAPUSER table for the gateway installation <sid>adm user on Java database. By doing so, br*tools will be able to connect to the java database.
Best regards,
Orkun Gedik -
I have a SQL 2008 R2 database that I am trying to move to 2012. Made a full backup of the database in 2008 R2. Recovery model is Simple, compatibility level is 2008 Went to 2012, created a dummy database, did Tasks--> Restore -->
Database , located the backup file, selected it, changed the file locations and tried to restore the backup (with overwrite option), got the following error:
BACKUP LOG cannot be performed because there is no current database backup.
This is a simple task that has always worked in 2008 R2. Does anyone know what the problem is and a possible solution?
ThanksHi,
This error occurs when the database recovery model has been changed to Simple and/or the recovery model has been changed back to Full but a full backup has not been performed since the change.
If a full backup has been performed, the following conditions will require that another full backup be taken:
· The recovery model had been changed without taking a full backup
· A SQL maintenance plan task had changed the recovery model (reindexing can cause this)
· A backup specifying TRUNCATE_ONLY had been run on the database
· The database was detached from another server and attached to the current server
Additionally, if we take full database backup after the Database is set to readonly, Then transaction log backup we will end up with this error. This is expected behavior. I have list an example within the link below.
Please check above conditions and fix your issue, if you have any concern, please let me know.
Example:
BACKUP LOG cannot be performed because there is no current database backup.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/b5c36e60-836f-4c9e-b9d7-3fb3f3ee4d37/backup-log-cannot-be-performed-because-there-is-no-current-database-backup
Thanks
Candy Zhou -
Dear Experts,
We are taking backup through db13 ECC Deve Server but getting following error--
Job started
Step 001 started (program RSDBAJOB, variant &0000000000029, user ID BASIS)
Execute logical command BRBACKUP On host sapeccdev
Parameters:-u / -jid TAPIN20091130155408 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaipbs.tib 2009-11-30 15.54.08
BR0484I BRBACKUP log file: /oracle/DEV/sapbackup/becaipbs.tib
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0301W SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310W Connect to database instance DEV failed
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaipbs
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.09
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0202I Copying /oracle/DEV/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/2mn ...
BR0209I Volume in device /dev/rmt/2mn has name SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.16
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0301E SQL error -27140 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-27140: attach to post/wait facility failed
BR0310E Connect to database instance DEV failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 15.54.18
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Kindly revert with helful suggestion.
Regards,
AjitDear Markus,
after the relink all, this is the following log----
Job started
Step 001 started (program RSDBAJOB, variant &0000000000005, user ID BASIS)
Execute logical command BRBACKUP On host qserv
Parameters:-u / -jid TAPIN20091130174249 -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.00 (32)
BR0055I Start of database backup: becaiysn.tib 2009-11-30 17.42.49
BR0484I BRBACKUP log file: /oracle/QAS/sapbackup/becaiysn.tib
BR0477I Oracle pfile /oracle/QAS/102_64/dbs/initQAS.ora created from spfile /oracle/QAS/102_64/dbs/spfileQAS.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: becaiysn
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt/2mn
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt/2mn will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.49
BR0226I Rewinding tape volume in device /dev/rmt/2m ...
BR0278E Command output of 'LANG=C mt -f /dev/rmt/2m rew':
/dev/rmt/2m: No such device or address
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0279E Return code from 'LANG=C mt -f /dev/rmt/2m rew': 1
BR0213E Winding tape volume in device /dev/rmt/2mn failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt/2mn failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2009-11-30 17.42.50
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
Regards,
Ajit
Maybe you are looking for
-
Problem in designe selection screen
Hi Experts, i have to design a selection screen like Month -> january to sepetmber tear -> 2005 to current year i am using the field delivery_date for this purpose(which has no data element). the field is dats and lenth 8 it con
-
Submit Form as XML / Rename attached XML file
Hello, I am using the followig script to submit a form: var Mailto = "[email protected]"; var mySubject = "This is the subject"; var myMessage = "Please find attached my file."; var Mail = "mailto:" + Mailto + "?Subject=" + mySubject + "&Body=" + my
-
Required code on to find out mfcc in speech recognition
Hi frenzs I'm doing my acdemic project in speech recognition. so i have to find out mfcc for a wav file. so please send me the code. my id [email protected] Thanks Anjali
-
Mount_webdav has been updated
Suddenly, my Mac started to annoy me with the folowing dialogue: "mount_webdav has been updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version? This change is permanent and affects
-
Problem with search engines and BC
Hi This is what google does when look for my website. is hosted with BC and this domain is listed on the sites that BC gave me. do I need to elliminate this from the list. if yes, how is that done? I cannot have a site declared insecured by google!