Database Components in Oracle 8i
Hello,
How to find all the Oracle Database features installed on Oracle 8i.
Thanks
launch oracle uinversal installer and view it from there
Similar Messages
-
Ensure that all database components/objects provided by Oracle are VALID
Hi Guys
need some clarification concern the below point from -> 1503653.1
Ensure that all database components/objects provided by Oracle are VALID in the source database prior to starting the upgrade.
Ensure that you do not have duplicate objects in the SYS and SYSTEM schema.
Question 1:
what do you really mean by all the database components/ objects provided by oracle are Valid?
does the below object consider an Oracle object? I got to know this objects is invalid after after running -> dbupgdiag.sql
SQLTXADMIN SYNONYM 1
Question 2:
if my user application objects is invalid? Can i still be able to forward with the upgrade?
It seem that the main concern is those ORACLE's component/ objects have to be VALID.hi all,
want to add on.
does ORACLE's component means objects own by SYS and SYSTEM?
like the below objects that is spool out by the script -> dbupgdiag.sql
that it is in invalid status.
SYS USER_AUDIT_TRAIL VIEW
SYS DBA_AUDIT_SESSION VIEW
SYS USER_AUDIT_SESSION VIEW
SYS DBA_AUDIT_STATEMENT VIEW
SYS DBA_COMMON_AUDIT_TRAIL VIEW
SYS DBA_AUDIT_OBJECT VIEW
SYS USER_AUDIT_OBJECT VIEW
SYS DBA_AUDIT_EXISTS VIEW
SYS USER_AUDIT_STATEMENT VIEW -
Which are Oracle database components that Siebel need?
Hi Everyone,
I'm a beginner about Siebel application. I will install Oracle database software but Installation guide cannot be found about Oracle database components.
Please suggest about this.
Thanks,
HikoHi,
If your question is related with the installation of Oracle database, then you can find the step by step installation from the link below:
http://www.oracle.com/technetwork/database/enterprise-edition/documentation/index.html
In addition, if you're new to Siebel Applications then you better download the documentation library about Siebel Applications:
http://www.oracle.com/technology/documentation/siebel.html
After you check the documentation, if you have questions, I'd like to help.
Regards,
Cuneyt -
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
How to reinstall the database components of BI Publisher (11.1.1.5)
Hi,
We're using BI Publisher 11.1.1.5 installed within an existing Weblogic 10.3.6 instance running on Oracle Linux 5.6.
We installed it against an existing 10g test database.
We decided to refresh the database from the production system and we had to rebuild the test db from scratch, meaning we lost all BIP components installed in it.
We re-ran the BIP RCU to create the schemas but we can't see how we can reinstall the other required BIP database components without doing a full deinstall and then install of everything.
The other required db components are such things as the bipcatalog java classes. These are not installed by the RCU from what it seems.
We have another test database with the BIP components in it and I can see them there so we could export/import them if necessary, but I thought there must be a way to use an assistant or something to do it.
Any ideas how to go about reinstalling just the db objects?
Thanks,
DaveI have found out what it was that needed loading into the database, it wasn't BI Publisher specific after all. It is the database callout utility and JPublisher classes, which are used when calling out to invoke web services. They're loaded using loadjava command into the database.
-
Database Upgradation from oracle 9.2.0.8 to oracle11gR2
Hi
we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2
i am having some doubt from below pre-upgrade scripts out put.
oratst@ebsdevdb on /tmp # sqlplus "/as sysdba"
SQL*Plus: Release 9.2.0.8.0 - Production on Mon Jul 4 10:11:48 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> spool 11202_upgrade.txt
SQL> @utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 07-04-2011 10:17:06
Script Version: 11.2.0.2.0 Build: 001
Database:
--> name: EBSTEST
--> version: 9.2.0.8.0
--> compatible: 9.2.0
--> blocksize: 8192
--> timezone file: V1
Logfiles: [make adjustments in the current environment]
--> The existing log files are adequate. No changes are required.
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
--> TOOLS tablespace is adequate for the upgrade.
.... minimum required size: 8 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 61 MB
--> AR_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 33497 MB
--> FND_TABLE tablespace is adequate for the upgrade.
.... minimum required size: 45447 MB
--> AMVD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> ASOD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> CCTD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> IBUD tablespace is adequate for the upgrade.
.... minimum required size: 1 MB
--> IEMD tablespace is adequate for the upgrade.
.... minimum required size: 5 MB
--> IEOD tablespace is adequate for the upgrade.
.... minimum required size: 4 MB
--> JTFD tablespace is adequate for the upgrade.
.... minimum required size: 135 MB
--> OKCD tablespace is adequate for the upgrade.
.... minimum required size: 34 MB
--> XDPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> XNPD tablespace is adequate for the upgrade.
.... minimum required size: 7 MB
--> APPS_UNDOTS1 tablespace is adequate for the upgrade.
.... minimum required size: 849 MB
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "compatible" must be set to at least 10.1.0
WARNING: --> "shared_pool_size" needs to be increased to at least 532 MB
WARNING: --> "java_pool_size" needs to be increased to at least 128 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> optimizer_max_permutations 10.1 OBSOLETE
--> row_locking 10.1 OBSOLETE
--> undo_suppress_errors 10.1 OBSOLETE
--> max_enabled_roles 10.1 DEPRECATED
--> enqueue_resources 10.2 OBSOLETE
--> sql_trace 10.2 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Real Application Clusters [upgrade] INVALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [install]
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Passwords exist in some database links.
.... Passwords will be encrypted during the upgrade.
.... Downgrade of database links with passwords is not supported.
WARNING: --> Deprecated CONNECT role granted to some user/roles.
.... CONNECT role after upgrade has only CREATE SESSION privilege.
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 9.2.0.8.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER ADWANIAH has 1 INVALID objects.
.... USER APPS has 34 INVALID objects.
.... USER CHAKKACHANSA has 1 INVALID objects.
.... USER FA_USER has 9 INVALID objects.
.... USER SYSSEL has 2 INVALID objects.
.... USER SYSTEM has 30 INVALID objects.
.... USER XXITDFINAD has 7 INVALID objects.
WARNING: --> SYSTEM schema default tablespace has been altered.
.... The SYSTEM schema default tablespace is currently set to TOOLS.
.... Prior to upgrading your database please reset the
.... SYSTEM schema default tablespace to SYSTEM using the command:
.... ALTER USER SYSTEM DEFAULT TABLESPACE SYSTEM;
WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following commands
while connected as SYSDBA:
EXECUTE dbms_stats.gather_schema_stats('CTXSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('DBSNMP',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('MDSYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDPLUGINS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('ORDSYS',options=>'GATHER'
estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('OUTLN',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYS',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
EXECUTE dbms_stats.gather_schema_stats('SYSTEM',options=>'GATHER'
,estimate_percent=>DBMS_STATS.AUTO_SAMPLE_SIZE
,method_opt=>'FOR ALL COLUMNS SIZE AUTO'
,cascade=>TRUE);
Oracle recommends removing all hidden parameters prior to upgrading.
To view existing hidden parameters execute the following command
while connected AS SYSDBA:
SELECT name,description from SYS.V$PARAMETER WHERE name
LIKE '\_%' ESCAPE '\'
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
Changes will need to be made in the init.ora or spfile.
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SYSAUX Tablespace:
[Create tablespace in the Oracle Database 11.2 environment]
--> New "SYSAUX" tablespace
.... minimum required size for database upgrade: 500 MB
From above output script
1)SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 8546 MB
From system tablespace minimum required size means free space from system tablespace or total size of system tablespace?
i am going to use dbua utility for upgrade means does it alter tablespace as per output of scripts or we need to manually alter tablespace size as per requirement?
2)WARNING: --> Database contains schemas with objects dependent on DBMS_LDAP package.
.... Refer to the 11g Upgrade Guide for instructions to configure Network ACLs.
.... USER APPS has dependent objects.
what is above warning and how can i configure ACL's for APPS User?
Thanks
With Regards
A-ZHi
oratst@ebsdevdb on /ebdbh/11g/data/cfgtoollogs/dbua/ebstest/upgrade1 # more Upgrade_Directive.log
Connected.
ODMA_DIRECTIVE:VERSION:9.2.0.8
ODMA_DIRECTIVE:MIGRATE_SID:
ODMA_DIRECTIVE:ORA:IGNORE:06512:
ODMA_DIRECTIVE:ORA:FATAL:00600:
ODMA_DIRECTIVE:ORA:FATAL:01012:
ODMA_DIRECTIVE:ORA:FATAL:01031:
ODMA_DIRECTIVE:ORA:FATAL:01034:
ODMA_DIRECTIVE:ORA:FATAL:01078:
ODMA_DIRECTIVE:ORA:FATAL:01092:
ODMA_DIRECTIVE:ORA:FATAL:01109:
ODMA_DIRECTIVE:ORA:FATAL:01119:
ODMA_DIRECTIVE:ORA:FATAL:01507:
ODMA_DIRECTIVE:ORA:FATAL:01722:
ODMA_DIRECTIVE:ORA:FATAL:03113:
ODMA_DIRECTIVE:ORA:FATAL:03114:
ODMA_DIRECTIVE:ORA:FATAL:07445:
ODMA_DIRECTIVE:ORA:FATAL:12560:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01650:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01651:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01652:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01653:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01654:
ODMA_DIRECTIVE:ORA:RECOVER_TBS:01655:
ODMA_DIRECTIVE:ORA:RECOVER_ROLL:01562:
ODMA_DIRECTIVE:ORA:RECOVER_INIT:04031:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catupgrd.sql:
ODMA_DIRECTIVE:BOUNCE_DATABASE:UPGRADE:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:rdbms/admin/catuppst.sql:
ODMA_DIRECTIVE:SCRIPT:UPGRADE:sqlplus/admin/help/hlpbld.sql helpus.sql:
Thanks
With Regards
A-Z -
What components of Oracle BI EE are mandatory for Oracle BI Applications?
Hi All,
We have to install below Oracle Business Intelligence Applications Modules
1) Financial Analytics
2) HR Analytics
3) Oracle Supply Chain Analytics
Before installing BI Appcations we have to install Oracle BI EE, and there are some components in Oracle BI EE.
I have some query regarding Oracle BI Application installation & configuration:
Which components of Oracle BI EE are mandatory to install above mentioned modules for Oracle BI Apps?
Which type of Installation should we select from BASIC and ADVANCED ?
Any help would be highly appreciated.
Thanks in advance.
Regards,
Manmohan SharmaHi all
I want to install Oracle BI EE and it need OracleAS wich I can install from Oracle SOA suite (2nd choice of the installation type). But in the setup progression of AS, I had a message that the ORACLE HOME exist.
I had an instance of SOA suite installed, but I have uninstall it and remove the oracle home from system variables.
in my machine, I have : Windows Vista, Oracle database 11g, JDeveloper 10.1.3.3, Oracle 10 XE.
Any help please !!!! -
Database componentes required/excluded for RMAN and Grid control repository
I'm planning creation of a centralized 10gR2 RMAN repository for my production/dev environment, and needed a basic, barebones database. We may also use that same database as a repository for 10g OEM Grid Control in the future, so I wanted to ensure I was prepared for that.
None of the documentation says anything about particular required components for RMAN, only that a database is needed. So am I allowed to deselect all items from the following DBCA list? I didn't expect any problems with the optional components, but wanted to make sure that RMAN or Grid control would function, were I to disable Oracle JVM or XML DB. My standard loadout (for better or worse) is to include everything in my production/dev databases, and I didn't want that to be the case with this one.
Database Components:
Oracle Data Mining
Oracle Text
Oracle OLAP
Oracle Spatial
Enterprise Manager Repository
Standard Database Components:
Oracle JVM
Oracle XML DB
Oracle IntermediaThanks. For that matter, do DBA's in the general population install those standard oracle components? I have them there in my default installs just because of the message 'Oracle recommends you have these installed.' in the DBCA screen.
-
How to know what database components have been installed on my database?
How to know what database components that have been installed on my database using SQL*PLUS tool? (10g 10.2.0)
Edited by: frank.qian on Nov 8, 2008 10:55 PMHi..
>
SQL> select comp_name,comp_id,version,status from dba_registry;
select comp_name,comp_id,version,status from dba_registry
The error on the first line:
ORA-00942:The table or view not exis.
>
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
sys >desc dba_registry
Name Null? Type
COMP_ID NOT NULL VARCHAR2(30)
COMP_NAME VARCHAR2(255)
VERSION VARCHAR2(30)
STATUS VARCHAR2(11)
MODIFIED VARCHAR2(20)
NAMESPACE NOT NULL VARCHAR2(30)
CONTROL NOT NULL VARCHAR2(30)
SCHEMA NOT NULL VARCHAR2(30)
PROCEDURE VARCHAR2(61)
STARTUP VARCHAR2(8)
PARENT_ID VARCHAR2(30)
OTHER_SCHEMAS VARCHAR2(4000)
sys >select COMP_ID,COMP_NAME,VERSION,STATUS from dba_registry;
COMP_ID COMP_NAME VERSION STATUS
CATALOG Oracle Database Catalog Views 10.2.0.4.0 VALID
CATPROC Oracle Database Packages and T 10.2.0.4.0 VALID
ypes
OWM Oracle Workspace Manager 10.2.0.4.3 VALID
JAVAVM JServer JAVA Virtual Machine 10.2.0.4.0 VALID
XML Oracle XDK 10.2.0.4.0 VALID
CATJAVA Oracle Database Java Packages 10.2.0.4.0 VALID
EXF Oracle Expression Filter 10.2.0.4.0 VALID
ODM Oracle Data Mining 10.2.0.4.0 VALID
CONTEXT Oracle Text 10.2.0.4.0 VALID
XDB Oracle XML Database 10.2.0.4.0 VALID
RUL Oracle Rules Manager 10.2.0.4.0 VALID
ORDIM Oracle interMedia 10.2.0.4.0 VALID
APS OLAP Analytic Workspace 10.2.0.4.0 VALID
XOQ Oracle OLAP API 10.2.0.4.0 VALID
AMD OLAP Catalog 10.2.0.4.0 VALID
SDO Spatial 10.2.0.4.0 VALID
EM Oracle Enterprise Manager 10.2.0.4.0 VALID -
Adding a database to the Oracle Restart Configuration
Hi,
I have:
- 2 nodes - Linux RHEL 5
- Grid Infrastructure 11.2.0.1
- Database Standard Edition 11.2.0.1 + RAC
- All database files on ASM (integrated with GI), software on local storage
I manually created a clustered database and I am currently trying to add it the Oracle Restart Configuration. The first step is to create a cluster resource for the database using the 'srvctl add database' command. In the documentation I found [http://docs.oracle.com/cd/E11882_01/server.112/e10595/restart005.htm]
Important:When you manually add a database to the Oracle Restart configuration, you must also add the Oracle grid infrastructure software owner as a member of the OSDBA group of that database. This is because the grid infrastructure components must be able to connect to the database as SYSDBA to start and stop the database.
For example, if the host user who installed the grid infrastructure home is named grid and the OSDBA group of the new database is named dba, then user grid must be a member of the dba group.>
In my test system I created the resource without adding the grid user to the OSDBA group of the database and all work fine (at least I don't see any problem). The database is correctly started every time the system starts.
My question is why it is necessary to add the grid user to the osdba group?
Regards,
TimThanks for the reply.
It's not so obvious for me. If it was written "...you should...", than it could be treated as recommended. I see "...you MUST also add..." and that for me means it's obligatory.
When you create a database with DBCA, the grid user is not added to the OSDBA group of the database. I am trying to figure out why.
Regards,
Tim -
Clarification on Prerequisite components for Oracle IDM 11gR2PS2
I am new to Oracle Fusion Middleware. However, I am familiar with IDM concepts of a different vendor.
I started with installation documentation and would like to have clarification on IDM components (Includes OAM, OAAM, OIM, OSTS, OES, OIN, OUD, OIF, ESSO, OIC, OPAM). While referring "Oracle Identity and Access Management 11g Release 2 (11.1.2.x) Certification Matrix", first section describes system requirements which tells us about supported "Processor type, OS Version, OS 32/64 Bit, Database" etc for 11gR2PS2 (11.1.2.2.0). "ID&Access" tab tells about LDAP supported for specific component(s).
Notes -
"Some Oracle Identity and Access Management components require an Oracle Database. Ensure that you have an Oracle Database installed on your system before installing Oracle Identity and Access Management. The database must be up and running to install the relevant Oracle Identity and Access Management component. The database does not have to be on the same system where you are installing the Oracle Identity and Access Management component."
I am aware of the fact that configuration will be difficult in these type of architecture I mention below and it is not recommended. Moreover, I will not be able to use RCU. Let's ignore the configuration part for a while.
As mentioned above, when I went through first section it says, database supported for Identity Management 11gR2PS2 (11.1.2.2.0) is "Oracle Database". Whereas in the section which specifies about the supported LDAP type, specification are as below -
(for ease of understanding I have just take two components from the IDM suite).
OAM - Oracle Internet Directory
- Oracle Virtual Directory
- Microsoft Active Directory 2008,
- Novell eDirectory 8.8,
- IBM Tivoly Directory Server 6.3
- And as per list...
Whereas, OIM Server supports,
OIM - Oracle Internet Directory,
- Oracle unified Directory,
- Microsoft Active Directory 2008
However, I do not find Novell eDirectory or IBM Tivoli Directory server in the LDAP supported list for OIM Server.
My Question is,
In the list of supported database, it has been listed as "Oracle Database" everywhere. Whereas support for LDAP type we have option(s) from different vendors. Does this mean that if I plan to use LDAP something other than Oracle Internet Directory / Oracle unified Directory / Oracle Virtual Directory, my database should be 'Oracle Database' only ?
Scenario 1 - I want to use OAM server and since OAM supports LDAP from Microsoft, IBM, Novell.
Can I go for IBM Tivoli Directory Server as LDAP type and IBM DB2 as database type ?
or
IBM DB2 as database type and Oracle Internet Directory / Oracle Unified Directory ?
or
(If deploying on Windows system) Microsoft SQL server as database type and Microsoft Active Directory 2008 as LDAP type ?
Or is it Mandate that my database should be "Oracle Database" irrespective of LDAP (IBM TDS / Microsoft Active Directory / Novell eDirectory) I select.
Scenario 2 - I want to use OIM server and apart from Oracle Internet Direcotry / Oracle Unified Directory it only supports Microsoft Active Directory 2008 as per list.
Does this mean that if I use 'OIM Server' component of Oracle IDM 11gR2PS2 (11.1.2.2.0),
My database will be 'Oracle Database' and as a option for LDAP I have Microsoft Active Direcotry 2008 ? Yes, We have Oracle Unified Directory if we don't opt for Microsoft Active Directory.
or
If I plan to use Microsoft Active Directory 2008 as my LDAP can I use Microsoft SQL server as database ? Or Should I use "Oracle Database" only ?
And, the OIM components doesn't support IBM's DB2 or IBM's Directory server / Novell eDirectory. ?Any OIM experts, can you guys help!!
-
Creating a database on Personal Oracle 9i on Windows 2000
Hi,
Well, I cannot create database on Personal Oracle 9i on Windows 2000 via Database Configuration Assistant. Same problem occurs during installation. Here is the message:
CreateProcess: null -new -sid DES -startmode m error=2
Does anyone know anything about it?
Please reply...
Thank you...Apply the lastest patch to the OS and try.
Joel Perez -
RC-00118: Error occurred during creation of database Raised by oracle.apps.
Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again. -
DATABASE RESOURCE MANAGER ( ORACLE 8I NEW FEATURE )
제품 : ORACLE SERVER
작성날짜 : 2004-08-16
DATABASE RESOURCE MANAGER ( ORACLE 8I NEW FEATURE )
===================================================
SCOPE
8i~10g Standard Edition 에서는 Database Resource Manager 를 지원하지 않는다.
Explanation
Database Resource Manager란 OS에서 제공하는 자원 (예 : CPU 자원 )에 대해 DB
차원에서 계획을 세워, 세부 관리를 할 수 있도록 해 주는 서비스이다.
예를 들어 주간에 batch 작업을 처리하더라도, OLTP 업무에는 지장을 주지 않아야
할 경우 batch 작업에 CPU 자원을 적게 할당해 주는 것이 바람직 하며, Resource
Manager를 활용하여 CPU 자원을 batch 작업과 OLTP 업무에 서로 다르게 할당해 줄
수 있다. ( Oracle 8.1.6 까지는 Resouurce Manager에서 CPU 자원에 대해서만
관리만 가능하다 )
1. 용어
1) Resource Consumer Group
사용자 session들의 집합. Resource에 대한 요구사항에 따라 나뉘어진 그룹.
2) Resource Plan
Consumer Group에 자원을 할당 해 주기 위한 resource plan directive들을
포함.
3) Resource Allocation Method
Resource Manager에서 자원을 할당해 주는 방법/정책.
4) Resource Plan Directive
Resource Plan에 대해 자원을 할당해 주는 세부 내역.
2. Resource Consumer Group
* 기본 group
[ 사용자가 삭제, 수정할 수 없는 group ]
OTHER_GROUPS : active plan schema에 속하지 않는 consumer group의 모든
session
DEFAULT_CONSUMER_GROUP : consumer group을 지정하지 않은 모든
session.(default)
[ 기본적으로 제공되나 사용자가 삭제하거나 변경할 수 있는 group ]
SYS_GROUP : SYSTEM_PLAN에 대한 high priority consumer group
SYSTEM, SYS user에 할당한다.
LOW_GROUP : SYSTEM_PLAN에 대한 low priority consumer group
3. Resource Plan
Consumer group에 속하는 session들은 해당 group에 대한 resource plan에
따라 자원 할당이 결정되며, 자원 할당에 대한 세부 사항은 resource plan에
대한 resource plan directive에서 지정된다.
Resource plan은 subplan을 둘 수 있다.
4. Resource Allocation Method
Round-robin Method : Consumer group 내에서 session들에 대한 CPU 할당
Emphasis Method : Consumer group에 할당되는 CPU
Absolute Method : Parallel degree 한계 ( 예 : Parallel Query에서의
degree )
5. Resource Plan Directive
Resource Plan Directive에 지정된 내용들은 resource plan에 따라
consumer group에 자원을 할당할 때 반영된다.
6. 구현 예제
MYDB PLAN +-> MAILDB PLAN +-> POSTMAN GROUP (40% Level 1)
| (30% Level 1) |
| +-> USERS GROUP (80% Level 2)
| |
| +-> MAILMAINT GROUP (20% Level 2)
| |
| +-> OTHER GROUP (100% Level 3)
|
+-> BUGDB PLAN +-> ONLINE GROUP (80% Level 1)
(70% Level 1) |
+-> BATCH GROUP (20% Level 1)
|
+-> BUGMAINT GROUP (100% Level 2)
|
+-> OTHER GROUP (100% Level 3)
위 예에서 MYDB PLAN에는 2개의 subplan ( MAILDB PLAN, BUGDB PLAN )이
있으며 각각 30%와 70%의 CPU 자원을 할당하였다.
Level 1, Level 2, Level 3 는 우선순위 레벨을 의미하며, 하나의
resource plan에서 동일한 level의 합이 100%를 넘지 못한다.
( Level 은 1부터 8까지 지정할 수 있으며 level 1이 가장 우선순위가
높으며 level 8이 가장 우선순위가 낮다 )
예를 들어 전체 CPU 자원의 70%를 할당 받은 BUGDB PLAN은 다시
ONLINE GROUP과 BATCH GROUP을 두고 있는데, 이 둘의 Level이 모두 1이며
두개의 percentage의 합이 100%이다. 하지만, 즉, level 1인 ONLINE GROUP
에 90%를 할당하였다면, level 1인 BATCH GROUP에는 10% 이상을 할당할 수
없다.
Example
* 구현을 위한 코드
BEGIN
/* PLAN schema 작업 영역 생성 */
DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
/* BUGDB PLAN, MAILDB PLAN, MYDB PLAN 생성 */
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'bugdb_plan',
COMMENT => 'Resource plan/method for bug users sessions');
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'maildb_plan',
COMMENT => 'Resource plan/method for mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'mydb_plan',
COMMENT => 'Resource plan/method for bug and mail users sessions');
/* CONSUMER GROUP 생성 */
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Online_group', COMMENT => 'Resource consumer group/method for
online bug users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Batch_group', COMMENT => 'Resource consumer group/method for
bug users sessions who run batch jobs');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Maintenance_group', COMMENT => 'Resource consumer group/method
for users sessions who maintain the bug db');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_users_group', COMMENT => 'Resource consumer group/method for
mail users sessions');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_Postman_group', COMMENT => 'Resource consumer group/method for
mail postman');
DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_Maintenance_group', COMMENT => 'Resource consumer group/method
for users sessions who maintain the mail db');
/* BUGDB PLAN에 대한 DIRECTIVE 생성 */
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Online_group', COMMENT => 'online bug users
sessions at level 1', CPU_P1 => 80, CPU_P2=> 0,
PARALLEL_DEGREE_LIMIT_P1 => 8);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Batch_group', COMMENT => 'batch bug users
sessions at level 1', CPU_P1 => 20, CPU_P2 => 0,
PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Maintenance_group',COMMENT => 'bug
maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 => 100,
PARALLEL_DEGREE_LIMIT_P1 => 3);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'OTHER_GROUPS', COMMENT => 'all other users
sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, CPU_P3 =>
100);
(참고) CPU_P1 : cpu allocation for level 1
/* MAILDB PLAN에 대한 DIRECTIVE 생성 */
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_Postman_group',COMMENT => 'mail postman at
level 1', CPU_P1 => 40, CPU_P2 => 0, PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_users_group', COMMENT => 'mail users
sessions at level 2', CPU_P1 => 0, CPU_P2 => 80,
PARALLEL_DEGREE_LIMIT_P1 => 4);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_Maintenance_group',COMMENT => 'mail
maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 => 20,
PARALLEL_DEGREE_LIMIT_P1 => 2);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'OTHER_GROUPS', COMMENT => 'all other users
sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, CPU_P3 =>
100);
/* MYDB PLAN에 대한 DIRECTIVE 생성 */
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan',
GROUP_OR_SUBPLAN => 'maildb_plan', COMMENT=> 'all mail users
sessions at level 1', CPU_P1 => 30);
DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan',
GROUP_OR_SUBPLAN => 'bugdb_plan', COMMENT => 'all bug users sessions
at level 1', CPU_P1 => 70);
/* PLAN schema 작업 내용을 저장 */
DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
end;
7. CONSUMER GROUP에 사용자나 세션을 할당하는 방법
먼저 인스턴스에서 사용할 TOP Level resource plan 을 지정한다.
initSID.ora에 RESOURCE_MANAGER_PLAN = MRDB_PLAN 지정이나 아래와 같이
session level에 ALTER SYSTEM command를 사용하여 지정한다.
ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = MYDB_PLAN;
그리고 SCOTT 계정에 BUG_ONLINE_GROUP과 BUB_BATCH_GROUP 에 속할 수 있는
권한을 부여
DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT',
'BUG_ONLINE_GROUP', TRUE);
DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT',
'BUG_BATCH_GROUP', TRUE);
* DBMS_RESOURCE_MANAGER.SET_INITIAL_CONSUMER_GROUP( user in
varchar2, consumer_group in varchar2);
예)
DBMS_RESOURCE_MANAGER.SET_INITIAL_CONSUMER_GROUP('SCOTT',
'BUG_ONLINE_GROUP');
SCOTT 계정을 BUG_BATCH_GROUP에 할당
* DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS (
session_id IN NUMBER,
session_serial IN NUMBER,
consumer_group IN VARCHAR2);
예)
DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS( 11, 2,
'BUG_ONLINE_GROUP');
* DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER (
user IN VARCHAR2,
consumer_group IN VARCHAR2);
예)
DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER('SCOTT',
'BUG_BATCH_GROUP');
8. 관련된 Dictionary
DBA_RSRC_PLANS : Resource plan과 status
DBA_RSRC_PLAN_DIRECTIVES : Resource plan directives와 status
DBA_RSRC_CONSUMER_GROUPS : Consumer group과 status
DBA_RSRC_CONSUMER_GROUP_PRIVS : 사용자에게 부여된 Consumer group
DBA_USERS : INITIAL_RSRC_CONSUMER_GROUP라는 새로운 column이 추가
V$SESSION : RESOURCE_CONSUMER_GROUP라는 새로운 column이 추가
V$RSRC_PLAN : 새로운 view로 active resource plan을 보여준다
V$RSRC_CONSUMER_GROUP : 새로운 view로 consumer group의 active session
을 보여준다.
Reference Ducumment
---------------------user1 is the schema present in DB1
user2 is the schema present in DB2. I just have a DB link
as below:
create database link link_to_DB2 connect to user2 identified by user2 using 'DB2';---Connects from user1 of DB1 to user2 of DB2.
Requirement is as below:
CPU for DB2 - 25%
Out of above 25%, CPU for user2 - 70%
CPU for user1 30% -- whenever it conncts using the link)
Please help me out. -
Database Error: DBD::Oracle::db do failed: ORA-04030: out of process memory
Hi
I have a stored procedure that uses the XMLQuery function (SELECT XMLQuery( '......' RETURNING CONTENT) FROM dual; ) to extract data from 3 different tables and store the xml file in XML DB. This store procedure was running fine for a long time until 2 weeks ago where I started seeing the following error:
Database Error: DBD::Oracle::db do failed: ORA-04030: out of process memory when trying to allocate 92 bytes (koh dur heap d,qmxtkWriteXobToOpn:heap)
Currently I have 16,000 records. I am not sure what is going on, the size of the previous successful output xml file is about 2M. I also noticed when the stored procedure runs with 3G of system memory available, it basically used up all the memory and cpu time. The store proc consistently dies after 3.5 hour and spits out the ORA-04030 out of process memory error.
Does anyone have any suggestion what to look for or what parameters I need to set? ThanksUnless your database is strictly a DSS-type of database, your AWR report exposes loads of issues with it. And I think none of the time during the AWR window was spent on database. Look at the DB time (with all those multi cores) compared with the elapsed time of the AWR.
As you are on 11g, why not make use of MEMORY_TARGET (a single parameter to manage both SGA and PGA)? If you are already on it, ignore this as I can't see it anywhere. If not, get rid of SGA_TARGET and PGA_AGGREGATE_TARGET and replace it with a single MEMORY_TARGET parameter. However you may have a minimum threshold set for different SGA pools so that they won't shrink beyond that point.
Having said that, setting MEMORY_TARGET is not a guarantee to avoid ORA-4030. Just a single bad PL/SQL code could go and exploit the untunable part of your process memory and even go and blow up the physical memory. If you are using FORALL and BULK load, see if you can cut it down into few chunks rather than running as a single process.
What does your V$PGASTAT say?
Maybe you are looking for
-
Ipod classic always has to restore, then doesn't sync
Hello, my ipod's problem is the following. Whenever I connect it to itunes it comes up saying itunes has found a damaged ipod and it need to be restored, so then I restore, because I have no other option. After this, I press sync and it starts syncin
-
install itunes on my pc windows xp. got message: itunes library itl cannot be read because created by newer version of itunes. should i go to add/remove programs & uninstall then reinstall?
-
How do I change the thickness properties of underline in Adobe Reader XI.4?
I have been using the underline tool in Adobe Reader. Over the last couple of weeks the line has been thick - so easy to see. Today however I began using it and now it is a very narrow line. I have tried going into tool default properties but I only
-
Canon SD 750 Elph not recognized by iPhoto '08
Hi discussions. This is just an answer to a problem I was having and might be helpful to anyone having iPhoto camera connection problems. First off, I have four apple computers; three running 10.4.11 and one, a new 2.8ghz MacBook Pro, running 10.5.5.
-
Report not showing my image in BLOB field
Hi, I m using report 6i. But I just upgraded my server from Oracle 8.0 to 9i and now that I have a new table with image, I created the field to be a BLOB field. However, in old days, I uses LongRaw and I save my images using the following:- READ_IMAG