Database creation with ASM: Out of Memory Error.

Greetings,
So I'm running DBCA, choose my ASM configuration, the first thing that sticks out to me is that the password I enter fails, but it still allows me to choose the ASM container. Go forward, choose my options, hit finish, and right out of the gate in the "Creating and Starting Oracle Instance" phase, I get an:
ORA-27102: out of memory
There are no other instances on this RHEL 4 installation. There's 32GB of Memory. Any ideas??
Thanks!

I would make sure you set all the Kernel parameters correctly in the install guide.
So ASM is already running and you are creating the DB or you are trying to create an ASM instance?
Also found this on Metalink:
Applies to:
Oracle Server - Enterprise Edition - Version: 9.2.0.4
SUSE \ UnitedLinux x86-64
Red Hat Enterprise Linux Advanced Server x86-64 (AMD Opetron Architecture)
Linux x86-64
Symptoms
When trying to increase the SGA to approach half available RAM with an Oracle 64bit version on a Linux 64bit operating system, even though shmmax is set to match half the amount of RAM, you get the following error when trying to start the instance:
SQL> startup nomount
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
Changes
shmall is set to default at 2097152
Cause
shmall is number of pages of shared memory to be made available system-wide.
Solution
Set shmall equal to shmmax divided by the page size.
FYI: The page size can be seen using the following command:
$ getconf PAGE_SIZE
Errors
ORA-27102 out of memory

Similar Messages

Can anyone help with an out of memory error on CS2?

Hello,
I have been battling with an out of memory error on a dell laptop running 2gb of ram. I have had no prior issues with this laptop running CS2 until last week when I started getting the out of memory errors. I have seen several articles about this occuring on later versions of illustrator. Just prior to this issue appearing I had to delete and rebuild the main user profile on the computer due to it consistently logging into a temporary account.
Once the new profile was established and all user documents and profile settings were transferred back into it, this problem started showing up. The error occurs when clicking on files listed as Illustrator files, and when opening the illustrator suite. Once I click on the out of memory error it still continues to load illustrator. The files are located on a server and not on the remote computer. I have tried to copy the files to the local hard drive with the same result when I try to open them. I also tried to change the extension to .pdf and got no further. I tried to open a file and recreate the work and all I got was the black outline of the fonts. none of the other artwork appeared. once rebuilt, when trying to save, It gives the out of memory error and does not save the file.
Illustrator was installed on another dell laptop, same model, etc and works fine. no problem accessing network files. I just attempted to use Illustrator from the admin profile on the machine in question and it works fine and lightening fast. Just not from the new rebuilt profile. I have tried to uninstall and reinstall the software. it has not helped. could there be stray configuration settings that we transfered over to the new profile that should not have been?
Any insights will be helpful.
Thank You,
Brad Yeutter

Here are some steps that could help you:
http://kb2.adobe.com/cps/320/320782.html
http://kb2.adobe.com/cps/401/kb401053.html
I hope this helps!

Database creation = ora-27102 out of memory

Hi,
     I have a solaris sparc 9.5
Memory size: 16384 Megabytes
     swapfile dev swaplo blocks free
/dev/dsk/c1t0d0s1 32,25 16 1068464 1068464
     And when I try to create a database with the following configuration
     DUMMY AREA NAME SUM(BYTES)
2 Shared Pool shared pool 603979776
3 Large Pool large pool 352321536
4 Java Pool java pool 33554432
5 Redo Log Buffer log_buffer 787456
6 Fixed SGA fixed_sga 731328
     =>     ora-27102 out of memory
     Help me please

The error is reported by Oracle during allocation of the SGA and will happen
in cases where the kernel parameter SHMMAX/SHM_MAX is not set high enough.
The SHMMAX kernel parameter decides the maximum size of a shared memory segment
that can be allocated in the system. Since Oracle implements SGA using shared
memory, this parameter should be set appropriately. The value of the SHMMAX
kernel parameter should be higher than the maximum of SGA sizes of the Oracle
instances used in the server. In cases where the SHMMAX is smaller than the SGA
size, Oracle tries to fit the entire SGA into a single shared memory segment,
which will fail, and you will see the warning message in the alert.log.
The recommended value for this parameter is 4294967295 (4 GB), or the size of
physical memory, or half the size of physical memory, depending on platform.
Setting the SHMMAX to recommended value in the kernel parameter configuration
file and rebooting the server will get rid of the warning messages. See the
platform specific Oracle installation guide for detailed information on how to
modify the SHMMAX/SHM_MAX kernel parameter.
General guidelines for SHMMAX on common platforms
(check with your vendor for maximum settings):
Platform Recommended value
Solaris/Sun 4 GB or max sga whichever is higher

Database creation with ASM using dbca

hi all,
i found the steps to create the database using ASM diskgroup.
but i received errors when configuring the FRA(flash recovery area), DBF(normal), +ARCH(archival dest),
i tried atleast 2 to 3 times from scratch but found the same error....................
ORA: 19624
ORA: 19870
here are the steps can somebody correct these steps..................
Create Virtual Disks from VM Ware software when server is down.
Choose Edit Virtual Machine Settings.
Click on Add button
Press Next and Highlight Hard Disk, then click Next
Check ‘Create a New Virtual Disk’
Choose SCSI as type
Select Size as 2 GB
Name the virtual disk as ‘ASMDBF1.vmdk’
Create additional disks as:
ASMDBF1.vmdk for DBF files
ASMDBF2.vmdk Failover group
ASMFRA.vmdk Flash Back Recovery Area
ASMREDO.vmdk Redo Log Area
ASMARCH.vmdk Archived Logs
•     Start up the server OraWorld1
•     Go to Disk Management and you will be prompted with a screen which should display all five disks with a check mark. Accept defaults and Click next.
•     On second script all five will be unchecked, click Next
•     Press Finish to complete and you should see all 5 disks as Type Basic Unallocated. For each of the disk perform:
1.     Right click, New Partition, Extended Partition and Finish
2.     Right click, New Logical drive, Do not assign drive letter nor partition it.
3.     From command prompt type Diskpart and enter Automount enable.
4.     From command prompt, configure basic CRS services as
5.     C:\oracle\product\10.2.0\db_1>localconfig add
6.     C:\oracle\product\10.2.0\db_1>localconfig add
7.     Step 1: creating new OCR repository
8.     Successfully accumulated necessary OCR keys.
9.     Creating OCR keys for user 'administrator', privgrp ''..
10.     Operation successful.
11.     Step 2: creating new CSS service
12.     successfully created local CSS service
13.     successfully added CSS to home
•     Launch DBCA and choose Configure Storage Management.
•     Select Create New group, choose stamp disks which will show you all of your five disks. Configure ASM links to all these disks as:
1.     ORCLDISKASMDBF1 \Device\Harddisk1\Partition1
2.     ORCLDISKASMDBF2 \Device\Harddisk2\Partition1
3.     ORCLDISKASMFRA \Device\Harddisk3\Partition1
4.     ORCLDISKASMREDO \Device\Harddisk4\Partition1
5.     ORCLDISKASMARCH \Device\Harddisk5\Partition1
Now make Change Disk Discovery Path as Null and you should see all disks.
Now create Disk groups as :
ARCH \\.\ORCLDISKASMARCH External 1GB
REDO \\.\ORCLDISKASMREDO External 1GB
FRA \\.\ORCLDISKASMFRA External 2GB
DBF (MAIN GROUP WITH 2 SUB-GROUPS) Must create as Normal Redundancy
DBFP \\.\ORCLDISKASMDBF1 External 2GB
DBFS \\.\ORCLDISKASMDBF2 External 2GB
You now have a running ASM instance on the server.
•     Checking ASM instance
You can always use DBCA to check settings of ASM.
Alternatively, go to command prompt:
Set ORACLE_SID=+ASM
Sqlplus /nolog
Connect sys/password as sysdba
Show sga (80MB)
Total System Global Area 83886080 bytes
Fixed Size 1247420 bytes
Variable Size 57472836 bytes
ASM Cache 25165824 bytes
SQL>desc You can then check C:\oracle\product\10.2.0\db_1\database for these files. You can also view v$parameter for all possible values for ASM instance.
+asm.asm_diskgroups='DATA1','ARCH','REDO','FRA','DBF'#Manual Mount
*.asm_diskgroups='DATA1','ARCH','REDO','FRA','DBF'
*.asm_diskstring=''
*.background_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\bdump'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\cdump'
*.instance_type='asm'
*.large_pool_size=12M
*.remote_login_passwordfile='SHARED'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\udump'
You can change some of the values like large pool and even db cache size. You can also manually create the disk group as:
Create diskgroup DBF NORMAL redundancy
Failgroup flgrp1 disk ‘\\.\ORCLDISKDATA0’, ‘\\.\ORCLDISKDATA1’
Failgroup flgrp2 disk ‘\\.\ORCLDISKDATA2’, ‘\\.\ORCLDISKDATA3’;
Check Candidate disks:
select group_number, disk_number, mount_status, header_status, state, path from v$asm_disk;
Other useful queries:
Select group_number, name, total_mb, free_mb, state, type
From v$asm_diskgroup;
Select group_number, disk_number, mount_status, header_status, state, path, failgroup
From v$asm_disk;
You can use sql commands to perform most of the ASM tasks, however EM console can also be used here
Oracle Database Installation
•     Launch DBCA
•     Choose Create Database and select OLTP type
•     Name it as ORCL2, choose ASM as file system, select all disk groups to be used.
•     Use oracle managed files as:+DBF press Next
*•     Specify Flash Recovery Area as +FRA*
*•     Enable archiving at +ARCH*
*•     Choose Auto SGA as 55% of memory*
*•     Leave else default and complete DB creation.*
*•     Launch NetConfig and define Listener with default settings.* here i received the errors,.................
Database ORCL2 is created with the following attributes:
NAME: ORCL2
SPFILE: +ARCH/ORCL2/spfileORCL2.ora
URL: http://oraworld1:1158/em

Strange, those messages are RMAN backup errors -- are you trying to backup the database?
Or...if you selected "create starter database" it may be that dbca is not finding the backup files from the "demo" database.
:p

Thread: Out of memory error

I'm running a program that reads a file of more than 20k lines. Each line of this file is being processed by a thread. Sometimes the program is being halted with the out of memory error.
What can I do to solve this problem ? Is it better to change the logic of this program and instead of calling a new thread for each line, call few threads to be responsible of processing multiple lines ?
The current java version is 1.4.2.13. Upgrading it to the most recent version can solve the problem ?
I'm running it with the following configuration:
"-Xms1024m -Xmx2048m -XX urvivorRatio=10"
Thanks a lot,
Marcos.

Indeed this design is flawed. It is an old system that came to my hands and now I have to fix some bugs on it.
What is the difference between calling thousand of threads and having this backport of concurrent to take care of it ? I mean, isn't the jvm responsible for managing the both cases ?
Using the backport of concurrent and defining a limited size thread pool, what will happen if the number of lines in the file is greater than the size of this pool ?
Do you have an example or a link to where I can get a good example on how to use it ?
Thanks for helping!

Loading JPEG/Gif images causes Out Of Memory Error

Hello Java gurus, please shed some light on this.....
I am not a java newbie, but I am a java newbie in the area of dealing with graphics. I am using JDK 1.4.2_01 on Win XP with 2.4ghz and 512 RAM. When I try to read in a (or a few) JPEG image into a JLabel using ImageIcon, I get an out of memory error everytime. This happens whether I am reading the image out of a jar file or out of a local directory. The JPEG's are 8.5" x 11", and range between 150kb to 900kb. I am trying to load approximately 10 images in a JTabbedPane using new JLabel(ImageIcon) on individual JPanels (one JPanel for each JPEG). Now I get the java.lang.outofmemory error whether I try to load 1 image or 10 images. Anyone got a clue as to what I am doing wrong? I actually do get one image loaded before the error gets thrown. So I do know that it is trying to load the right image. What is going on here? Is it an ImageIcon problem, or are there others who have run into this. It has brought this project to a grinding halt, and I had thought this would be the easier part!!!! Please help me out gurus! Thanks!

What options/values are you suggesting that I set? Or do you mean something else? Thank you for any ideas that can help me solve this problem. I never had any issues dealing with using ImageIcon for toolbar button graphics (file sizes of 1-3kb), but now with dealing with full page graphics I have run into a brick wall with this out of memory error.

Keep getting Out of Memory error on InDesign CC 2014

I work with 5 documents on a daily basis that can have over 150 images imported each. When I try to move around the document, it either freezes up and the wheel keeps turning or it comes up with an Out of Memory error message and locks up. It also will just quit.
I had seen somewhere about being able to "assign" a certain amount of memory to the software using the "get info" panel, but I can't find any reference to memory on the "get info" panel.
Any help would be greatly appreciated.
Thanks
CJ

I inherited the file from a previous employee and they had lots of embedded files. I am slowly replacing them with linked as they are updated. Are linked or embedded better?

Out of Memory error on database Create

Have installed 9i on Sun Solaris, and when I try and create a database I alwys get
27102 - Out of memory error. I am selectng General Database from the dbca choices
and take all the defaults. I tried removing options but still get the same error.
The machine has 2GB Ram .
Help: [email protected] , [email protected]

Hey guys I am wondering whether you configure or allocated memory before you started your installation???? That should be in /etc just vi system as root of course and look for the line *To set variables in Unix
after the set maxuser=XX
add the folowing
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_sshmseg=10
set semsys:seminfo_semmni=100
set semsys:seminfo_semmsl=100
set semsys:seminfo_semmns=430
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=100
and reboot you server then your installation won't hung this is the setting of my oracle 817 on Sun box
PS Take special care with set semsys:seminfo_semmns=430 if you are gona have more tha 200 process then do some calculation
If you didn't get the previous

Report with more than 600 kb image - BO Server getting Out Of memory Error

Hi,
   We have a report which displays images and size is above 600 KB.We are getting an "Out Of memory" Error while previewing this report in Business Object Server.
In another situation we tried by giving a dynamic path to the OLE object, but the report is not showing error. We are not able to view the image whose size is more than 600KB
Notes: 1. Image is stored as a BLOB in Oracle Database
           2. Connection used inside the report is OLEDB
           3. UNIX Environment
Regards,
Sathish

Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line.

Out of memory Error with jdk 1.6

Hello,
I have a swing application launched on the client with the help of Java web start. The applications works fine in jre 1.4 and jre 1.5. The heap sizes are :
initial-heap-size="5m" max-heap-size="24m"
But when I run this using jre 1.6.0_05-b13, I am getting Out of memory Error, java heap size. And I see the memory usage is growing rapidly which I didn't notice in other jre versions (1.4 and 1.5).
Does anyone have any idea on this?
Thanks in advance,
MR.

Thanks for your response Peter. During my continuous testing I identified that error happens on jdk 1.5 also. And I have increased the min-heap-size to 24 MB and max-heap-size to 64 MB. But in that case also I noticed the out of memory error. The interesting thing is, the min-heap-size is never increased from 24MB and lot of free memory also.
Memory: 24,448K Free: 12,714K (52%) ... completed.
The Outofmemoryerror triggers from the reader thread which does the job of reading the data from the InputStream. One thing is we are continuously pushing more data on the output stream from the other end. Is that any limitation on InputStream which can hold some definite amount of data.
Please throw some light on this.

Out of memory error with 80Kb file?

Hi, my pc has 2Gb of Ram, a page file that is setup correctly
and the physical ram is almost non-used (500Mb)
When I start DW and load a php file of 80Kb approx., it just
hangs/locks up. When I wait for it, it gives me an "out of memory"
error, and when you look in windows task manager, it just keeps
hogging up ram.
My laptop is a "simple", 1Gb Hp pavillion, and when I open
the file there, it just works like it's supposed to, using about
70Mb of ram, instead of the gigabyte(s) it does on my developer
machine....
Adjusting virtual memory has absolutely no effect.. It seems,
after some reading, that people using 2gb of ram, have the most
problems in this area?
Adobe, please help here !
EDIT: i just tested another file, 136Kb large, that loads
normal!, so it has to do with the files in specific... If you want
to test the files, just download "Simplemachines Forum" and load
the "load.php" or the "post.php" files from the source directory,
to trigger the lockup...

mmm... just tried using a "workaround" if you still can call
it that
Installed a virtual machine (xp) with less than 2gigs, and it
works... I really hope someone else has got these kind of errors
yet.... 2500$ + software, wich I can't use for now... Using
notepad2 for time being...

Data merge with football tickets. Printing causes out of memory errors. Can only print 10 at a time!

Here's the deal. Printing football tickets for the local high school. 10 tickets per 8.5 x 11 sheet. All black and white. I couldn't data merge into one whole document of tickets because it was failing to do that. So, I end up with 3 documents. First two have 50 pages of tickets and the last has 37 pages.
When I go to print, I can only print 10 pages at a time or InDesign straight up crashes or I get an "Out of Memory" error which is bull because I've got plenty of ram available (unless it's complaining about lack of HD space for some reason)
Incredibly frustrating.
Each ticket has 3 images on it. Two of the images are the same. Those two images are about 103kb .ai files. Very very simple. The other image is a TIFF that is about 76kb. So there are 1000 .ai files / document and 500 TIFFs.
Here's a video I took of it ripping: http://www.youtube.com/watch?v=UCjvdmXuaYs&feature=c4-overview&list=UUf_1UFp80YLZJfCyIxXEg kg
Also, when printing, I have the Send Data set to Optimized Subsampling instead of "All". That's not seeming to help.
Any thoughts?
IDCS 5.5
OSX 10.8.4

I just ran a sample on my laptop.
AI file, duplicated, is 284k. Image is roughly 200k. The CSV has 2054 records, and the merged document with 10 per page is 250 megabytes. PDF is just under 50 megs.
This laptop has only 4 gigs memory but has a lot of free disk space. It took a good amount of time to do the merge, a bit longer to create the PDF-X1a PDF.
Mike

ORA-27102 Out of Memory Error

Hi, I am installing Oracle 11g 64 bit in my server which is having windows server 2008 R2, and 64GB RAM. The software is installed successfully but while database creation it hangs at 2% progress copying database files. At this moment the full 64 GB memory gets consumed by Oracle installer and out of memory error flashed.
Also i got some memory error report on oracle website as follows, but I am unable to find how to solve this problem
*5.2.4 ORA-27102 Out of Memory Error*
When creating a database on a computer with large physical memory, Oracle Universal Installer or Database Configuration may display an out of memory error.
Workaround:
Select the Advanced Installation type during installation, or run Database Configuration Assistant after a software only installation and reduce the memory allocated for Oracle based on the shared memory settings for your operating system.
This issue is tracked with Oracle bug 9811726.
Please help me.

This is the dbca log file->
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.781 IST ] [Utils.getLocalHost:356] Hostname retrieved: MIPAS-SERVER, returned: MIPAS-SERVER
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.781 IST ] [WindowsSystem.dorunRemoteExecCmd:2061] WS: Calling windowsNative with cmd: C:\Windows\system32\acfsutil.exe
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.797 IST ] [WindowsSystem.dorunRemoteExecCmd:2064] WS: WinNative returned: false
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [CmdToolUtil.doexecute:374] nativeSystem.runRemoteExecCmd failed. Command = C:\Windows\system32\acfsutil.exe arguments = [info, fs, /o, ismountpoint, Y:\] env = null error = PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [OFSUtil.doIsACFSPartition:298] CmdToolUtil execute failed. boolean result = false
PRCT-1114 : Execution of acfsutil command failed on node localnode for location Y:\
PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
     at oracle.cluster.deployment.ClusterwareInfo.do1_isOFSPartition(ClusterwareInfo.java:1646)
     at oracle.cluster.deployment.ClusterwareInfo.do_isOFSPartition(ClusterwareInfo.java:1540)
     at oracle.cluster.deployment.ClusterwareInfo.isOFSPartition(ClusterwareInfo.java:1505)
     at oracle.sysman.assistants.util.hasi.HAUtils.isACFSFileSystem(HAUtils.java:1961)
     at oracle.sysman.assistants.dbca.backend.Verifier.checkIfACFS(Verifier.java:1948)
     at oracle.sysman.assistants.dbca.ui.DatabaseAreaPage.validateStorageDest(DatabaseAreaPage.java:675)
     at oracle.sysman.assistants.dbca.ui.DatabaseAreaPage.validate(DatabaseAreaPage.java:1187)
     at oracle.sysman.assistants.util.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:214)
     at oracle.ewt.wizard.WizardPage.processWizardValidateEvent(Unknown Source)
     at oracle.ewt.wizard.WizardPage.validatePage(Unknown Source)
     at oracle.ewt.wizard.BaseWizard.validateSelectedPage(Unknown Source)
     at oracle.ewt.wizard.BaseWizard.doNext(Unknown Source)
     at oracle.sysman.assistants.util.wizard.WizardExt.doNext(WizardExt.java:265)
     at oracle.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
     at oracle.ewt.button.PushButton.processActionEvent(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at oracle.ewt.button.PushButton.activate(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseReleased(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Component.java:5517)
     at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Component.java:5282)
     at java.awt.Container.processEvent(Container.java:1966)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Component.java:3984)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1791)
     at java.awt.Component.dispatchEvent(Component.java:3819)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: PRCT-1114 : Execution of acfsutil command failed on node localnode for location Y:\
PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
     at oracle.cluster.cmdtools.OFSUtil.doIsACFSPartition(OFSUtil.java:300)
     at oracle.cluster.cmdtools.OFSUtil.isOFSPartition(OFSUtil.java:260)
     at oracle.cluster.cmdtools.OFSUtil.isOFSPartition(OFSUtil.java:236)
     at oracle.cluster.deployment.ClusterwareInfo.do1_isOFSPartition(ClusterwareInfo.java:1642)
     ... 51 more
Caused by: PRCT-1011 : Failed to run {0}, PRKN-1014 : Failed to execute remote command "C:\Windows\system32\acfsutil.exe" on node "MIPAS-SERVER".executable doesn't exist
     at oracle.cluster.cmdtools.CmdToolUtil.doexecute(CmdToolUtil.java:379)
     at oracle.cluster.cmdtools.CmdToolUtil.execute(CmdToolUtil.java:339)
     at oracle.cluster.cmdtools.CmdToolUtil.doexecute(CmdToolUtil.java:271)
     at oracle.cluster.cmdtools.CmdToolUtil.execute(CmdToolUtil.java:233)
     at oracle.cluster.cmdtools.OFSUtil.doIsACFSPartition(OFSUtil.java:294)
     ... 54 more
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.812 IST ] [Verifier.checkIfACFS:1955] Y:\orcl1 is ACFS :false
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.844 IST ] [Verifier.setOradataDest:4897] setOradataDest:dfDest=Y:\orcl1
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.844 IST ] [TemplateManager.updateDatafileDestination:2081] updateDatafiles:datafileDir=Y:\orcl1
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.953 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=1
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo01.log
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=2
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo02.log
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.968 IST ] [TemplateManager.updateDatafileDestination:2225] From template, RedoLogGrName=3
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [TemplateManager.updateDatafileDestination:2240] new file name redo03.log
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1295] Storage Attribute OMF Mode false
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1296] Storage Attribute OSM Mode false
[AWT-EventQueue-0] [ 2012-09-27 13:30:00.984 IST ] [DatabaseAreaPage.validate:1297] set omf param false
[AWT-EventQueue-0] [ 2012-09-27 13:31:37.564 IST ] [DatabaseRecoveryAreaPage.invokeFileDialog:569] after setDrives
[AWT-EventQueue-0] [ 2012-09-27 13:31:37.564 IST ] [DatabaseRecoveryAreaPage.invokeFileDialog:595] Before runDialog
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.670 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:32:37.686 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.onSampleSchemaStateChange:277] Tbs Name: EXAMPLE
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.onSampleSchemaStateChange:278] Datafile Name: example01.dbf
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.addTransportableDatafiles:230] PluggableTablespaceTabPage::->addTransportableDatafiles()
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.035 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [TemplateManager.isInstallTemplate:2300] Selected Template by user:=General Purpose
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [TemplateManager.isInstallTemplate:2307] The Message Id to be searched:=GENERAL_PURPOSE
[AWT-EventQueue-0] [ 2012-09-27 13:33:00.847 IST ] [PluggableTablespacesTabPage.configureSampleSchema:256] PluggableTablespaceTabPage::->configureSampleSchema()
[AWT-EventQueue-0] [ 2012-09-27 13:33:27.289 IST ] [Verifier.processRawConfigFile:4031] StorageType == 0
[AWT-EventQueue-0] [ 2012-09-27 13:33:27.289 IST ] [DatabaseOptionPage.doNext:273] processRawConfigFile=false
[AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:33:27.320 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:228] InitParametersPage->validate: in SPFile condition
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:232] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [Verifier.validateSPFile:5233] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.validateRawDevice:760] Inside validateRawDevice
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.validateRawDevice:772] Device Exception
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [ClusterUtils.isRaw:738] The handle is invalid.
[AWT-EventQueue-0] [ 2012-09-27 13:33:29.145 IST ] [InitParametersPage.validate:340] InitParametersPage->validate: calling createUndoAttributes
[AWT-EventQueue-0] [ 2012-09-27 13:33:32.411 IST ] [Verifier.processRawConfigFile:4031] StorageType == 0
[AWT-EventQueue-0] [ 2012-09-27 13:33:32.411 IST ] [DatabaseOptionPage.doNext:273] processRawConfigFile=false
[AWT-EventQueue-0] [ 2012-09-27 13:35:00.941 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:00.956 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:00.956 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.050 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.175 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.284 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:01.986 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.079 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.189 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.204 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.204 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.329 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.469 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:02.859 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.000 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.109 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.109 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.125 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.218 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.374 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.483 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:03.967 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.185 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.310 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.419 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:04.607 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [OsUtilsBase.getTotalPhysicalMemory:375] Total Physical Memory in MB: 65525
[AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [OsUtilsBase.is64Bit:359] architecture is 64 bit: true
[AWT-EventQueue-0] [ 2012-09-27 13:35:26.308 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:28.710 IST ] [MemoryCalculator.calculateMemory:215] Setting SGA to MAX_SGA 1610612736
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:228] InitParametersPage->validate: in SPFile condition
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:232] original spFileName with variables ={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [Verifier.validateSPFile:5233] The SPFILE={ORACLE_HOME}\database\spfile{SID}.ora
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.validateRawDevice:760] Inside validateRawDevice
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.validateRawDevice:772] Device Exception
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [ClusterUtils.isRaw:738] The handle is invalid.
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.399 IST ] [InitParametersPage.validate:340] InitParametersPage->validate: calling createUndoAttributes
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.524 IST ] [StoragePage.selectAndExpandItem:353] item=oracle.sysman.emSDK.client.dataComponent.dataDrivenTree.TreeParentNode[label=Storage,index=0]
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.602 IST ] [StoragePage.selectAndExpandItem:362] item.isExpanded=true
[AWT-EventQueue-0] [ 2012-09-27 13:35:47.602 IST ] [StoragePage.selectAndExpandItem:373] selection.isSelected(item)=false
[AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
[AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
[AWT-EventQueue-0] [ 2012-09-27 13:36:00.130 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
[AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
[AWT-EventQueue-0] [ 2012-09-27 13:36:04.576 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[AWT-EventQueue-0] [ 2012-09-27 13:36:27.761 IST ] [DBCAVttgControlfileProxy.getVtoObject:123] DBCAVttgControlfileProxy: In getVtoObject function
[AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:73] val1=1 val2=2
[AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:73] val1=2 val2=3
[AWT-EventQueue-0] [ 2012-09-27 13:37:51.243 IST ] [RedoLogGroupsComparator.compare:93] result=-1
[TaskScheduler timer] [ 2012-09-27 13:37:52.232 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:37:53.489 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:37:54.536 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:37:55.800 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:37:56.206 IST ] [DBCAVbogRedoLogGroupImpl.getDefaultLogfilePath:327] defaultPath=Y:\orcl1\orcl1\
[AWT-EventQueue-0] [ 2012-09-27 13:37:58.499 IST ] [StoragePage.validate:995] StoragePage: In validate function
[AWT-EventQueue-0] [ 2012-09-27 13:37:58.499 IST ] [Verifier.validateTemplate:2019] StorageType == 0
[AWT-EventQueue-0] [ 2012-09-27 13:37:58.514 IST ] [CreationOptionPage.setSaveTemplateVisible:467] Setting save template visible = true
[AWT-EventQueue-0] [ 2012-09-27 13:38:18.155 IST ] [DBCAWizard.onFinish:1134] m_bFinishClicked: false
[TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
[TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySYSTEM\CurrentControlSet\Services\OracleServiceORCL
[TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [OsUtilsWindows.enumerateSIDs:428] imagepath c:\users\administrator\documents\product\11.2.0\dbhome_1\bin\ORACLE.EXE ORCL\bin
[TaskScheduler timer] [ 2012-09-27 13:38:18.170 IST ] [Verifier.validateTemplate:2019] StorageType == 0
[TaskScheduler timer] [ 2012-09-27 13:38:18.186 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.233 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.248 IST ] [Verifier.calculateCloneDatafilePathsAndSizes:3460] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.calculateRedoLogGroupFileSizes:3591] canonicalPath=Y:\orcl1\
[TaskScheduler timer] [ 2012-09-27 13:38:18.264 IST ] [Verifier.getControlfFileSizes:3510] No. of Control files:=2
[Thread-35] [ 2012-09-27 13:38:18.326 IST ] [UIHost.getHtmlSummary:1081] UIHost:getHtmlSummary: running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-35] [ 2012-09-27 13:38:18.342 IST ] [UIHost.getHtmlSummary:1087] UIHost:getHtmlSummary: after running createTemplateDocument NOT for SHOW_TEMPLATE condition
[Thread-35] [ 2012-09-27 13:38:18.342 IST ] [XSLConst.generateHeaderXSL:214] NLS:Template Name:= null
[Thread-35] [ 2012-09-27 13:38:18.342 IST ] [XSLConst.generateHeaderXSL:219] Template Description:= Use this database template to create a pre-configured database optimized for general purpose or transaction processing usage.
[Thread-35] [ 2012-09-27 13:38:18.404 IST ] [UIHost.getHtmlSummary:1117] UIHost->getHtmlSummary: start printing of transformed document
[TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [Host.executeSteps:5039] Executing steps....
[TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [Host.setUpForOperation:3625] setUpForOperation: Mode = 128
[TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
[TaskScheduler timer] [ 2012-09-27 13:38:51.814 IST ] [OsUtilsBase.getBaseFromOrabase:611] cmds: D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
[TaskScheduler timer] [ 2012-09-27 13:38:51.892 IST ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
Oracle home environment variable not set
[TaskScheduler timer] [ 2012-09-27 13:38:51.892 IST ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= null
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [InventoryUtil.getHomeName:111] homeName = OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getOracleHomeKeyImpl:979] getting home key for home name: OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySOFTWARE\ORACLE\KEY_OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getBaseFromOrabase:602] oraBaseUtility D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
[TaskScheduler timer] [ 2012-09-27 13:38:51.907 IST ] [OsUtilsBase.getBaseFromOrabase:611] cmds: D:\app\Administrator\product\11.2.0\dbhome_3\bin\orabase.exe
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getBaseFromOrabase:616] baseLocation from orabase
Oracle home environment variable not set
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getBaseFromOrabase:641] orabaseLocation= null
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [InventoryUtil.getHomeName:111] homeName = OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getOracleHomeKeyImpl:979] getting home key for home name: OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getRegistryEntry:1021] hklmKey while getting registry entryHKEY_LOCAL_MACHINE
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.getRegistryEntry:1022] keyToSet while getting registry entrySOFTWARE\ORACLE\KEY_OraDb11g_home4
[TaskScheduler timer] [ 2012-09-27 13:38:51.985 IST ] [OsUtilsBase.copyFile:1499] OsUtilsBase.copyFile:
[TaskScheduler timer] [ 2012-09-27 13:38:52.001 IST ] [OsUtilsBase.copyFile:1547] **write of file at destination complete...
[TaskScheduler timer] [ 2012-09-27 13:38:52.001 IST ] [OsUtilsBase.copyFile:1582] **file copy status:= true

Uploading large files from applet to servlet throws out of memory error

I have a java applet that needs to upload files from a client machine
to a web server using a servlet. the problem i am having is that in
the current scheme, files larger than 17-20MB throw an out of memory
error. is there any way we can get around this problem? i will post
the client and server side code for reference.
Client Side Code:
import java.io.*;
import java.net.*;
// this class is a client that enables transfer of files from client
// to server. This client connects to a servlet running on the server
// and transmits the file.
public class fileTransferClient
private static final String FILENAME_HEADER = "fileName";
private static final String FILELASTMOD_HEADER = "fileLastMod";
// this method transfers the prescribed file to the server.
// if the destination directory is "", it transfers the file to
"d:\\".
//11-21-02 Changes : This method now has a new parameter that
references the item
//that is being transferred in the import list.
public static String transferFile(String srcFileName, String
destFileName,
String destDir, int itemID)
if (destDir.equals(""))
destDir = "E:\\FTP\\incoming\\";
// get the fully qualified filename and the mere filename.
String fqfn = srcFileName;
String fname =
fqfn.substring(fqfn.lastIndexOf(File.separator)+1);
try
//importTable importer = jbInit.getImportTable();
// create the file to be uploaded and a connection to
servlet.
File fileToUpload = new File(fqfn);
long fileSize = fileToUpload.length();
// get last mod of this file.
// The last mod is sent to the servlet as a header.
long lastMod = fileToUpload.lastModified();
String strLastMod = String.valueOf(lastMod);
URL serverURL = new URL(webadminApplet.strServletURL);
URLConnection serverCon = serverURL.openConnection();
// a bunch of connection setup related things.
serverCon.setDoInput(true);
serverCon.setDoOutput(true);
// Don't use a cached version of URL connection.
serverCon.setUseCaches (false);
serverCon.setDefaultUseCaches (false);
// set headers and their values.
serverCon.setRequestProperty("Content-Type",
"application/octet-stream");
serverCon.setRequestProperty("Content-Length",
Long.toString(fileToUpload.length()));
serverCon.setRequestProperty(FILENAME_HEADER, destDir +
destFileName);
serverCon.setRequestProperty(FILELASTMOD_HEADER, strLastMod);
if (webadminApplet.DEBUG) System.out.println("Connection with
FTP server established");
// create file stream and write stream to write file data.
FileInputStream fis = new FileInputStream(fileToUpload);
OutputStream os = serverCon.getOutputStream();
try
// transfer the file in 4K chunks.
byte[] buffer = new byte[4096];
long byteCnt = 0;
//long percent = 0;
int newPercent = 0;
int oldPercent = 0;
while (true)
int bytes = fis.read(buffer);
byteCnt += bytes;
//11-21-02 :
//If itemID is greater than -1 this is an import file
transfer
//otherwise this is a header graphic file transfer.
if (itemID > -1)
newPercent = (int) ((double) byteCnt/ (double)
fileSize * 100.0);
int diff = newPercent - oldPercent;
if (newPercent == 0 || diff >= 20)
oldPercent = newPercent;
jbInit.getImportTable().displayFileTransferStatus
(itemID,
newPercent);
if (bytes < 0) break;
os.write(buffer, 0, bytes);
os.flush();
if (webadminApplet.DEBUG) System.out.println("No of bytes
sent: " + byteCnt);
finally
// close related streams.
os.close();
fis.close();
if (webadminApplet.DEBUG) System.out.println("File
Transmission complete");
// find out what the servlet has got to say in response.
BufferedReader reader = new BufferedReader(
new
InputStreamReader(serverCon.getInputStream()));
try
String line;
while ((line = reader.readLine()) != null)
if (webadminApplet.DEBUG) System.out.println(line);
finally
// close the reader stream from servlet.
reader.close();
} // end of the big try block.
catch (Exception e)
System.out.println("Exception during file transfer:\n" + e);
e.printStackTrace();
return("FTP failed. See Java Console for Errors.");
} // end of catch block.
return("File: " + fname + " successfully transferred.");
} // end of method transferFile().
} // end of class fileTransferClient
Server side code:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.net.*;
// This servlet class acts as an FTP server to enable transfer of
files
// from client side.
public class FtpServerServlet extends HttpServlet
String ftpDir = "D:\\pub\\FTP\\";
private static final String FILENAME_HEADER = "fileName";
private static final String FILELASTMOD_HEADER = "fileLastMod";
public void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException,
IOException
doPost(req, resp);
public void doPost(HttpServletRequest req, HttpServletResponse
resp)
throws ServletException,
IOException
// ### for now enable overwrite by default.
boolean overwrite = true;
// get the fileName for this transmission.
String fileName = req.getHeader(FILENAME_HEADER);
// also get the last mod of this file.
String strLastMod = req.getHeader(FILELASTMOD_HEADER);
String message = "Filename: " + fileName + " saved
successfully.";
int status = HttpServletResponse.SC_OK;
System.out.println("fileName from client: " + fileName);
// if filename is not specified, complain.
if (fileName == null)
message = "Filename not specified";
status = HttpServletResponse.SC_INTERNAL_SERVER_ERROR;
else
// open the file stream for the file about to be transferred.
File uploadedFile = new File(fileName);
// check if file already exists - and overwrite if necessary.
if (uploadedFile.exists())
if (overwrite)
// delete the file.
uploadedFile.delete();
// ensure the directory is writable - and a new file may be
created.
if (!uploadedFile.createNewFile())
message = "Unable to create file on server. FTP failed.";
status = HttpServletResponse.SC_INTERNAL_SERVER_ERROR;
else
// get the necessary streams for file creation.
FileOutputStream fos = new FileOutputStream(uploadedFile);
InputStream is = req.getInputStream();
try
// create a buffer. 4K!
byte[] buffer = new byte[4096];
// read from input stream and write to file stream.
int byteCnt = 0;
while (true)
int bytes = is.read(buffer);
if (bytes < 0) break;
byteCnt += bytes;
// System.out.println(buffer);
fos.write(buffer, 0, bytes);
// flush the stream.
fos.flush();
} // end of try block.
finally
is.close();
fos.close();
// set last mod date for this file.
uploadedFile.setLastModified((new
Long(strLastMod)).longValue());
} // end of finally block.
} // end - the new file may be created on server.
} // end - we have a valid filename.
// set response headers.
resp.setContentType("text/plain");
resp.setStatus(status);
if (status != HttpServletResponse.SC_OK)
getServletContext().log("ERROR: " + message);
// get output stream.
PrintWriter out = resp.getWriter();
out.println(message);
} // end of doPost().
} // end of class FtpServerServlet

OK - the problem you describe is definitely what's giving you grief.
The workaround is to use a socket connection and send your own request headers, with the content length filled in. You may have to multi-part mime encode the stream on its way out as well (I'm not about that...).
You can use the following:
http://porsche.cis.udel.edu:8080/cis479/lectures/slides-04/slide-02.html
on your server to get a feel for the format that the request headers need to take.
- Kevin
I get the out of Memory Error on the client side. I
was told that this might be a bug in the URLConnection
class implementation that basically it wont know the
content length until all the data has been written to
the output stream, so it uses an in memory buffer to
store the data which basically causes memory issues..
do you think there might be a workaround of any kind..
or maybe a way that the buffer might be flushed after
a certain size of file has been uploaded.. ?? do you
have any ideas?

Out of memory errors

I'm having problems starting 8i. When started from /etc/rc.d/
init.d/dbora during bootup or manually by root, I get an out of
memory error.
If I start it from the dbadmin user (oracle), I either get the
same out of memory error, or I end up with several hundred shell
logins and the database still doesn't respond.
This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a sample of
what happens when I get the out of memory error:
Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
6532K buff
Swap: 656360K av, 0K used, 656360K free
36328K cached
Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Release 8.1.5.0.0 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> Connected.
SVRMGR> ORA-27102: out of memory
Linux Error: 22: Invalid argument
SVRMGR>
Server Manager complete.
Database "ORCL" warm started.
null

It turns out that the problem I was having with a large number of
shell processes being created was due to the use of oraenv in my
.bashrc file (so much for following the instructions!) It was
calling itself recursively until the process limit was reached.
However, even with this fixed, the out of memory error still
exists.
max (guest) wrote:
: dan....
: check your init.ora......
Aside from comments, it has these lines, which were created by
dbassist:
db_name = test
instance_name = ORCL
service_names = test
control_files = ("/u02/oradata/test/control01.ctl", "/u02/oradata/
test/control02.ctl")
db_block_buffers = 8192
shared_pool_size = 4194304
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
# I reduced processes to see if it would help
processes = 10
log_buffer = 163840
background_dump_dest = /u01/admin/test/bdump
core_dump_dest = /u01/admin/test/cdump
user_dump_dest = /u01/admin/test/udump
db_block_size = 2048
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.1.0"
: also check ulimit
Here's ulimit -a:
core file size (blocks) 1000000
data seg size (kbytes) unlimited
file size (blocks) unlimited
max memory size (kbytes) unlimited
stack size (kbytes) 8192
cpu time (seconds) unlimited
max user processes 256
pipe size (512 bytes) 8
open files 1024
virtual memory (kbytes) 2105343
Everything looks pretty large to me.
: Dan Wilga (guest) wrote:
: : I'm having problems starting 8i. When started from /etc/rc.d/
: : init.d/dbora during bootup or manually by root, I get an out
: of
: : memory error.
: : If I start it from the dbadmin user (oracle), I either get
the
: : same out of memory error, or I end up with several hundred
: shell
: : logins and the database still doesn't respond.
: : This is RedHat Linux 6.0, kernel 2.2.5-22smp. Here is a
sample
: of
: : what happens when I get the out of memory error:
: : Mem: 160448K av, 53488K used, 106960K free, 26264K shrd,
: : 6532K buff
: : Swap: 656360K av, 0K used, 656360K free
: : 36328K cached
: : Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
: : Oracle8i Release 8.1.5.0.0 - Production
: : With the Java option
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> Connected.
: : SVRMGR> ORA-27102: out of memory
: : Linux Error: 22: Invalid argument
: : SVRMGR>
: : Server Manager complete.
: : Database "ORCL" warm started.
null

Database creation with ASM: Out of Memory Error.

Similar Messages

Maybe you are looking for