Database creation with Sapinst

Hi all.
We are testing an ECC5.0 no unicode to unicode conversion. We are trying to minimize downtime in the process.
We want to know if it is possible to create an empty database (with the expected unicode database size) previously to the import phase. Basically, we don't want to create the database with the sapinst program and just use it for importing data.
Is it possible to tell sapinst to skip the create database phase?
Anyone knows how to do this?
Thanks and regards.

Hi
Ya itis possible to skip the database phase..................you will have to do some modifications in control.xml.My suggestion is not to edit control.xml if your not an expert.
Rather go for systemcopy.
There are two options in systemcopy
1.Using database speacific tools
2.Normal systemcopy
You can go for the first option.Here whole of your database contents will get imported.
For any futher clarification feel free to contact.

Similar Messages

Physical Standby Database Creation with RMAN

Hi,
I'm in 10g on Linux. I want to create a standby database on another Linux server. I did not find a clear procedure to create it in Oracle® Database Backup and Recovery Advanced User's Guide 10g Release 2 (10.2) Part Number B14191-02
and niether in Oracle® Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-04
In the last one chapter 3 sends you to F appendix and F appendix says do nothing before having than all in chapter 3 :
In F.1.1 page F-2 it is said :
See Chapter 3 for a complete discussion of physical standby database preparation,including initialization parameter settings. You must perform all necessary preparation tasks described in these chapters before RMAN can successfully create the standby database files and mount the standby database.
Any way I'm looking for a procedure or clear article to create it.
Many thanks before.

Physical Standby Database Creation with RMAN
Use the DUPLICATE command.
Check out this metalink doc: Note:374069.1 and Note:118409.1
Message was edited by:
STW
Message was edited by:
STW

Database creation with ASM using dbca

hi all,
i found the steps to create the database using ASM diskgroup.
but i received errors when configuring the FRA(flash recovery area), DBF(normal), +ARCH(archival dest),
i tried atleast 2 to 3 times from scratch but found the same error....................
ORA: 19624
ORA: 19870
here are the steps can somebody correct these steps..................
Create Virtual Disks from VM Ware software when server is down.
Choose Edit Virtual Machine Settings.
Click on Add button
Press Next and Highlight Hard Disk, then click Next
Check ‘Create a New Virtual Disk’
Choose SCSI as type
Select Size as 2 GB
Name the virtual disk as ‘ASMDBF1.vmdk’
Create additional disks as:
ASMDBF1.vmdk for DBF files
ASMDBF2.vmdk Failover group
ASMFRA.vmdk Flash Back Recovery Area
ASMREDO.vmdk Redo Log Area
ASMARCH.vmdk Archived Logs
•     Start up the server OraWorld1
•     Go to Disk Management and you will be prompted with a screen which should display all five disks with a check mark. Accept defaults and Click next.
•     On second script all five will be unchecked, click Next
•     Press Finish to complete and you should see all 5 disks as Type Basic Unallocated. For each of the disk perform:
1.     Right click, New Partition, Extended Partition and Finish
2.     Right click, New Logical drive, Do not assign drive letter nor partition it.
3.     From command prompt type Diskpart and enter Automount enable.
4.     From command prompt, configure basic CRS services as
5.     C:\oracle\product\10.2.0\db_1>localconfig add
6.     C:\oracle\product\10.2.0\db_1>localconfig add
7.     Step 1: creating new OCR repository
8.     Successfully accumulated necessary OCR keys.
9.     Creating OCR keys for user 'administrator', privgrp ''..
10.     Operation successful.
11.     Step 2: creating new CSS service
12.     successfully created local CSS service
13.     successfully added CSS to home
•     Launch DBCA and choose Configure Storage Management.
•     Select Create New group, choose stamp disks which will show you all of your five disks. Configure ASM links to all these disks as:
1.     ORCLDISKASMDBF1 \Device\Harddisk1\Partition1
2.     ORCLDISKASMDBF2 \Device\Harddisk2\Partition1
3.     ORCLDISKASMFRA \Device\Harddisk3\Partition1
4.     ORCLDISKASMREDO \Device\Harddisk4\Partition1
5.     ORCLDISKASMARCH \Device\Harddisk5\Partition1
Now make Change Disk Discovery Path as Null and you should see all disks.
Now create Disk groups as :
ARCH \\.\ORCLDISKASMARCH External 1GB
REDO \\.\ORCLDISKASMREDO External 1GB
FRA \\.\ORCLDISKASMFRA External 2GB
DBF (MAIN GROUP WITH 2 SUB-GROUPS) Must create as Normal Redundancy
DBFP \\.\ORCLDISKASMDBF1 External 2GB
DBFS \\.\ORCLDISKASMDBF2 External 2GB
You now have a running ASM instance on the server.
•     Checking ASM instance
You can always use DBCA to check settings of ASM.
Alternatively, go to command prompt:
Set ORACLE_SID=+ASM
Sqlplus /nolog
Connect sys/password as sysdba
Show sga (80MB)
Total System Global Area 83886080 bytes
Fixed Size 1247420 bytes
Variable Size 57472836 bytes
ASM Cache 25165824 bytes
SQL>desc You can then check C:\oracle\product\10.2.0\db_1\database for these files. You can also view v$parameter for all possible values for ASM instance.
+asm.asm_diskgroups='DATA1','ARCH','REDO','FRA','DBF'#Manual Mount
*.asm_diskgroups='DATA1','ARCH','REDO','FRA','DBF'
*.asm_diskstring=''
*.background_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\bdump'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\cdump'
*.instance_type='asm'
*.large_pool_size=12M
*.remote_login_passwordfile='SHARED'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\+ASM\udump'
You can change some of the values like large pool and even db cache size. You can also manually create the disk group as:
Create diskgroup DBF NORMAL redundancy
Failgroup flgrp1 disk ‘\\.\ORCLDISKDATA0’, ‘\\.\ORCLDISKDATA1’
Failgroup flgrp2 disk ‘\\.\ORCLDISKDATA2’, ‘\\.\ORCLDISKDATA3’;
Check Candidate disks:
select group_number, disk_number, mount_status, header_status, state, path from v$asm_disk;
Other useful queries:
Select group_number, name, total_mb, free_mb, state, type
From v$asm_diskgroup;
Select group_number, disk_number, mount_status, header_status, state, path, failgroup
From v$asm_disk;
You can use sql commands to perform most of the ASM tasks, however EM console can also be used here
Oracle Database Installation
•     Launch DBCA
•     Choose Create Database and select OLTP type
•     Name it as ORCL2, choose ASM as file system, select all disk groups to be used.
•     Use oracle managed files as:+DBF press Next
*•     Specify Flash Recovery Area as +FRA*
*•     Enable archiving at +ARCH*
*•     Choose Auto SGA as 55% of memory*
*•     Leave else default and complete DB creation.*
*•     Launch NetConfig and define Listener with default settings.* here i received the errors,.................
Database ORCL2 is created with the following attributes:
NAME: ORCL2
SPFILE: +ARCH/ORCL2/spfileORCL2.ora
URL: http://oraworld1:1158/em

Strange, those messages are RMAN backup errors -- are you trying to backup the database?
Or...if you selected "create starter database" it may be that dbca is not finding the backup files from the "demo" database.
:p

Problem in new database creation with the help of online backup

Dear dba's
i am using oracle 11gR2 database in windows server 2003. database is running in ARCHIVE LOG mode.
i have taken an online backup of all datafile,controlfile and spfile.Then i crated folders in all the locations as required for new database.
then i registerd the service of new database named as 'newdb' by
oradim -NEW -SID newdb
then i created a password file manually in 'oracle_home\database' location.
i created a new contolfile named as controlfile_01.ctl. the content of controlfile as follows
STARTUP NOMOUNT
CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_1_7FK0XG7B_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_1_7FK0XHWB_.LOG'
) SIZE 50M,
GROUP 2 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_2_7FK0XM0Z_.LOG'
) SIZE 50M,
GROUP 3 (
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_3_7FK0XNOZ_.LOG',
'D:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\NEWDB\ONLINELOG\O1_MF_3_7FK0XOWB_.LOG'
) SIZE 50M
DATAFILE
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSAUX_7FK0SKPG_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_UNDOTBS1_7FK0SKTC_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_USERS_7FK0SKWB_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_EXAMPLE_7FK0Z5LK_.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\MARSH.DBF',
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\JOMARSH.DBF'
CHARACTER SET AL32UTF8
the control file path was registered in pfile also.
then i brought the database to nomount stage.
the problem is when i try to mount database it shows following error. anyone can help me to over come from this issue????????
SQL> startup pfile='D:\app\Administrator\product\11.1.0\db_1\database\INITnewdb.ora' nomount;
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 301990804 bytes
Database Buffers 226492416 bytes
Redo Buffers 5844992 bytes
SQL> ALTER DATABASE MOUNT;
ALTER DATABASE MOUNT
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
the alert massage is:
ORA-00210: cannot open the specified control file
ORA-00202: control file: 'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\CONTROLFILE\CONTROLFILE_01.CTL'
ORA-27048: skgfifi: file header information is invalid
OSD-04001: invalid logical block size (OS 1413563730)
Fri Dec 09 13:11:59 2011
Checker run found 1 new persistent data failures
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thanks & Regards,
John Marshal.A

Hi;
Error: ORA 205
Text: error in identifying control file <name>
Cause: The system could not find a control file of the specified name and
size.
Action: Either
Check that the proper control filename is referenced in the
CONTROL_FILES initialization parameter in the initialization parameter
file and try again.
When using mirrored control files, that is, more than one control file
is referenced in the initialization parameter file, remove the control
filename listed in the message from the initialization parameter file
and restart the instance.
If the message does not recur, remove the problem control file from
the initialization parameter file and create another copy of the
control file with a new filename in the initialization parameter file.
Regard
Helios

Standby database creation with the Grid Control Wizard.

Has anyone had issues with this tool ? I keep getting 'Failed' with the following error on the step 'Restore One Datafile'
and step 'Restore Current Logs' .
SQL> Connected to an idle instance.
ORA-01034: ORACLE not available
All the other steps 'Succeeded' .
We need to make this wizard work since the customer needs the capability and they are NOT going to do a manual setup.
Thanks for any pertinent assistance in advance .

Blues Breaker wrote:
Has anyone had issues with this tool ? I keep getting 'Failed' with the following error on the step 'Restore One Datafile'
and step 'Restore Current Logs' .
SQL> Connected to an idle instance.
ORA-01034: ORACLE not available
All the other steps 'Succeeded' .
We need to make this wizard work since the customer needs the capability and they are NOT going to do a manual setup.
Thanks for any pertinent assistance in advance .Instance status in not even in no mount status, instance not started and no background processes of oracle are running.
You want to restore only datafile? then database should be in mount status.

Database creation with dreamweaver without internet

Dear all,
I have a database with acces in the folder of my website on my computer.
I have two files : Accountcreation.html and Accountdatabase.accdb
When I input datas in the html file, i would create a new line in the accdb file. Is it possible inside dreamweaver to create this link without a mysql server?
Because i need to configurate my website without connection.
Thanks in advance

Hi
The question I have to ask here is, "How good is your php or javascript?".
The reason I ask this is that there are 2 or 3 ways to do this.
The first would be to use a localhost server and database, (if it is just for use on your computer) -
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
The second would be to use 'IndexedDB' which is a browser based database, see -
http://msdn.microsoft.com/en-us/library/ie/hh673548%28v=vs.85%29.aspx
The third method would be to use a simple csv text based database, (similar to the old 'flat file' database) but this one I would not recommend.
PZ

Database creation with ASM: Out of Memory Error.

Greetings,
So I'm running DBCA, choose my ASM configuration, the first thing that sticks out to me is that the password I enter fails, but it still allows me to choose the ASM container. Go forward, choose my options, hit finish, and right out of the gate in the "Creating and Starting Oracle Instance" phase, I get an:
ORA-27102: out of memory
There are no other instances on this RHEL 4 installation. There's 32GB of Memory. Any ideas??
Thanks!

I would make sure you set all the Kernel parameters correctly in the install guide.
So ASM is already running and you are creating the DB or you are trying to create an ASM instance?
Also found this on Metalink:
Applies to:
Oracle Server - Enterprise Edition - Version: 9.2.0.4
SUSE \ UnitedLinux x86-64
Red Hat Enterprise Linux Advanced Server x86-64 (AMD Opetron Architecture)
Linux x86-64
Symptoms
When trying to increase the SGA to approach half available RAM with an Oracle 64bit version on a Linux 64bit operating system, even though shmmax is set to match half the amount of RAM, you get the following error when trying to start the instance:
SQL> startup nomount
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
Changes
shmall is set to default at 2097152
Cause
shmall is number of pages of shared memory to be made available system-wide.
Solution
Set shmall equal to shmmax divided by the page size.
FYI: The page size can be seen using the following command:
$ getconf PAGE_SIZE
Errors
ORA-27102 out of memory

Error in installing Database Control with Database Creation Assistant

I'm trying to install the Database Control on Win2003 with the Database Creation Assistant. I get the following error. D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora (The system cannot find the path specified).
Our init.ora file is not in that path and our file is named initECOMDB.ora. How do I tell DBCA the correct path and file name to use?
By the way I'm a unix guy and this is the first time I've done Oracle on Windows. The database had been created by someone else and the files are sort of slung all over the place.
Replies appreciated.
Kirk

Open initECOMDB.ora, it may be calling D:\oracle\product\10.2.0\admin\ECOMDB\pfile\init.ora which does not exist. Change it to the correct directory or remove it if all the required parameters are already in initECOMDB.ora. The line to look for is ifile
BTW - if your database has already been created, you can create its database control from the command line:
emca -config dbcontrol db -repos create

LiveCache Installation (Database creation) problems

We are trying to install liveCache 7.6.29 (SCM 5.0 SR2), during the database creation phase we are encountering the below error;
Execute Command : /sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Start subprocess as user with uid: root
> Subprocess stops at 20070522205211
ERR
-24875,ERR_NEEDADMI: The operating system user is not a member of the database administrators group
-24994,ERR_RTE: Runtime environment error
20145,UNIX password ********
Please let me know if any of you have faced this issue and resolved the same.
Eagerly waiting for your reply, as this is a high priority for me.
Regards,
Thilaka

Hi Thilaka,
hm, why are you now askig the forum when you've direct email contact with me?
Anyway, this really should be handled over OSS...
Just fyi:
It seems that SAPINST is trying to issue the following command:
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,
Can you try and see if you can issue it from the commandline on your machine (with the same user, i.e. probably root)? Please do not forget to add the password of the ql1adm, which is either not visible in the above command or forgotten (by SAPINST):
/sapdb/programs/bin/dbmcli -n ql1ap01.cardinalhealth.net -R /sapdb/QL1/db db_create QL1 CONTROL,******** ql1adm,<b><password></b>
After issueing this, please try to continue using SAPINST (and please update the OSS message accordingly).
Regards,
Roland

Faced an error ora-01092 at the time of 9i manual database creation

Hi
i faced an error when i installing 9i on my linux manually
error is ORA-01092:oracle instance terminated disconnected forcibly
Any one please help
with regards
neo

HI,
Are you create UNDO TABLESPACE or specify undo tablespace creation in CREATE DATABASE command.
post your CREATE database command with ALERT<SID>.LOG file.
regards
Taj

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Database creation in oracle 9i

can any one tell me step of database creation in oracle 9i
i try many times from 2 days through script because my DBCA is not open
when i click it. DBCA created orcl during instalation but now
it is not running. will i have to install it ?
1)i add db_name=mukesh below db_name=orcl and run script but errors
2)i crete initm.ora by copy init.ora and change db_name=orcl by db_name=mukesh
in initm.ora but errors
1)when i use init.ora without adding db_name=mukesh
i also change undo_management by AUTO to manual i get
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> create database mukesh
2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
3 logfile
4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
create database mukesh
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-01504: database name 'mukesh' does not match parameter db_name 'orcl'
after that i add db_name=mukesh below db_name=orcl
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup pfile=D:\oracle\admin\orcl\pfile\init.ora nomount
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> create database mukesh
2 datafile 'D:\oracle\oradata\mukesh\system01.dbf' size 325m
3 logfile
4 group 1 ('D:\oracle\oradata\mukesh\redo01.log') size 100m,
5 group 2 ('D:\oracle\oradata\mukesh\redo02.log') size 100m,
6 group 3 ('D:\oracle\oradata\mukesh\redo03.log') size 100m;
create database mukesh
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: 'D:\oracle\oradata\orcl\CONTROL01.CTL'
ORA-27038: skgfrcre: file exists
OSD-04010: <create> option specified, file already exists

Hi,
If you getting a problem with DBCA go for manually process:-
I had listed steps which I follow
Step 1: Decide on Your Instance's System Identifier (SID)
Step 2: Create the Initialization Parameter File
Note:- Name the copied init.ora file init<SID>.ora because this is the default naming convention that the Oracle server looks for when it tries to start up the instance ORACLE_HOME/dbs directory (exists over the prefered path)
Edit this file's parameters so that your database and your instance will run effectively on your system.
DB_NAME Must be set to a text string of eight characters or less. During database creation, the value assigned to DB_NAME is recorded in the database's datafiles, redo log files, and control files. If, when you attempt to start the database instance, the value of DB_NAME as recorded in the initialization parameter file and the database name in the control files are not the same, the database will not start.
DB_DOMAIN A text string that specifies the network domain where the database is created.
CONTROL_FILES Is assigned the comma-separated list of control file names to use for the new database. When you execute the CREATE DATABASE statement, the control files listed as values assigned to this parameter are created. If you fail to specify a filename for the CONTROL_FILES parameter, Oracle creates a file with a default operating system dependant filename.
DB_BLOCK_SIZE Specifies the standard block size of the database. This size is used in the creation of the system tablespace and by default in any other tablespaces created. Take care when determining what this value should be because after the database is created, the value cannot be changed.
UNDO_MANAGEMENT Determines whether the database starts in automatic undo management mode. A value of AUTO enables automatic undo management; MANUAL enables manual undo management mode. In 9i, AUTO is suggested, but MANUAL is default.
UNDO_TABLESPACE When the instance starts in automatic undo management mode, it needs to have a tablespace in which to store its undo information. The default is SYS_UNDOTBS and is automatically created if you execute a CREATE DATABASE statement with the UNDO_MANAGEMENT initialization parameter set to AUTO and no UNDO TABLESPACE statement in the CREATE DATABASE statement.
Step 3: Connect to and Start the Instance
Connect to the instance as SYSDBA either using operating system authentication or the password file method of authentication and start up the instance using the STARTUP command.
sqlplus '/ as sysdba'
If your parameter file is not in the default location or is not named init<SID>.ora, you may need to specify the PFILE clause in the STARTUP command for the instance to start.
Because you do not yet have a database attached to the instance, you need to start up the instance in NOMOUNT state:
startup nomount;
The instance is now started and ready for the CREATE DATABASE command.
Step 4: Issue the CREATE DATABASE Statement
create database mydb1 controlfile reuse
Logfile
Group 1 ('/mydb1/log1/log01a.log',
'/mydb2/mydb1/log01b.log') size 50M,
Group 2 ('/mydb1/log1/log02a.log',
'/mydb2/log1/log02b.log') size 50M,
Group 3 ('/mydb1/log1/log03a.log',
'/mydb2/mydb1/log03b.log') size 50M
Datafile '/mydb1/mydb1_system.dbf' 250M
AUTOEXTEND ON MAXSIZE 500M
Undo tablespace mydb1_undo1
Datafile '/mydb/mydb1/mydb1_undo1.dbf' 50M
Default temporary tablespace mydb1temp tempfile
'/mydb/mydb1/mydb1temp1.dbf' size 75M
Extent management local
Character set US7ASCII
MAXLOGFILES 10
MAXLOGMEMBERS 10
MAXLOGHISTORY 1
MAXDATAFILES 500;
Thanks
Pavan Kumar N

Database creation in oracle 8.0.4

Hi,
I'm creating a database in Oracle 8.0.4. I choose the custom option to give all the parameters. One of these parameters is the password of internal user. I give it as oracle. After giving all the other parameters and then click on finish to create the database, i get ORA-01017 error and i'm being forced to abort the database creation.
After this error has occured, i've created another two databases with a different names and all went fine. I didnt have any problems while creating the databases. Again after the creation of the new databases, i tried to create the old database. Even then i got the same error.
can anyone let me know what might be the reason for this and the solution to overcome this problem.
Thanks in advance,
Jaikanth V Garlapati.

Found this in Oracle Doc,
NLS_DATABASE_PARAMETERS is the one you set when you do Create Database.
NLS_INSTANCE_PARAMETERS is the one you set in your spfile when you start instance.
So if you didn't set NLS_INSTANCE_PARAMETERS in spfile, then instance will start with NLS_DATABASE_PARAMETERS
And alter session will over write them all.
It's not new behavior in 10.2.0.4
==============================================
NLS Database Parameters
When a new database is created during the execution of the CREATE DATABASE statement, the NLS-related database configuration is established. The current NLS instance parameters are stored in the data dictionary along with the database and national character sets. The NLS instance parameters are read from the initialization parameter file at instance startup.
You can find the values for NLS parameters by using:
NLS Data Dictionary Views
NLS Dynamic Performance Views
OCINlsGetInfo() Function
NLS Data Dictionary Views
Applications can check the session, instance, and database NLS parameters by querying the following data dictionary views:
NLS_SESSION_PARAMETERS shows the NLS parameters and their values for the session that is querying the view. It does not show information about the character set.
NLS_INSTANCE_PARAMETERS shows the current NLS instance parameters that have been explicitly set and the values of the NLS instance parameters.
NLS_DATABASE_PARAMETERS shows the values of the NLS parameters for the database. The values are stored in the database.

Oracle 10g database creation in windows2003 server

hi,
i need the step by step procedure to create oracle 10g database in windows 2003 server.
with regards
velu

asifkabirdba wrote:
http://download.oracle.com/docs/cd/B19306_01/install.102/b15681/toc.htm
Asif,
IMO, the OP wanted to have steps given to him for the database creation , not the installation of the software.Not sure though since the wording chosen by him is not very clear.
@OP,
If you are looking for the database creation steps , the best would be to use DBCA! Other than that, you may want to look at the manual way of doing the same, given over here.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#i1017640
That said, if you were looking for the installation instructions, please look at the link given by Asif.
HTH
Aman....

Oracle 9i manual database creation on the Red Hat 9 Linux

I installed Oracle 9I on the Red Hat 9 Linux successfully with automatic database creation.
I tried to create second database manually and everything seemed to be fine until I issued create database statement. I got the following error:
ERROR at line 1
ORA-01092: ORACLE instance terminated. Disconnection forced.
Please help me to solve the problem.
Thank you,

Ok I am having the same exact problem and I am typing this into the shell before I run the installer.
export DISPLAY=yourdesktop:0.0
I thought that would fix the problem but it still hangs and gives the same message as the other guy gets. How can I solve this problem and get the installer running? I would really appreciate any help. This is the message I get:
[oracle@localhost linux]$ ./runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2003-08-02_10-09-53PM/jre/bin/java. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Window.<init>(Window.java:188)
at java.awt.Frame.<init>(Frame.java:315)
at java.awt.Frame.<init>(Frame.java:262)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
[oracle@localhost linux]$

Database creation with Sapinst

Similar Messages

Maybe you are looking for