Database fails on startup
HI
I have copied the database from tape. When i try to start it - I get the error message:
ORA-01122: databasefile 1 failed verification check
ORA-01110: datafile 1 '/dev/rlvdbsfm-01.db'
ORA-01207: file is more recent than controlfile -old controlfile
Is there a command to fix up the controllfile?
Without knowing the details of what you did, how you restored, etc. I would say you're probably going to need to...
1.Startup in mount mode
2.recover database using backup controlfile
3.open the database with resetlogs
That's assuming you don't have a more current controlfile than what you restored from tape. You're getting this message because the SCN in your datafile is more current than it is in your controlfile. Might want to open a TAR with Oracle though, and you can walk them through exactly what you did.
Similar Messages
-
Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
BoHi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo -
hi am trying to do backup using rman but database fail
C:\>rman target sys/pswd@sid NOCATALOG
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Nov 7 17:47:34 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SMSDEV (DBID=3638300981, not open)
using target database control file instead of recovery catalog
RMAN> backup database;
Starting backup at 07-NOV-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00010 name=C:\APP\TSHIFHIWA\PRODUCT\11.2.0\DBHOME_1\DATABASE\TEST
input datafile file number=00008 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\GATEWAY_TBS.DBF
input datafile file number=00001 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\SYSTEM01.DBF
input datafile file number=00002 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\SYSAUX01.DBF
input datafile file number=00003 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\UNDOTBS01.DBF
input datafile file number=00004 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\USERS01.DBF
input datafile file number=00007 name=C:\APP\TSHIFHIWA\PRODUCT\11.2.0\DBHOME_1\DATABASE\TEMP09
input datafile file number=00009 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\ECADASTRE_TBS.DBF
input datafile file number=00005 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\TEMP06.DBF
input datafile file number=00006 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\TEMP05.DBF
channel ORA_DISK_1: starting piece 1 at 07-NOV-13
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/07/2013 17:51:55
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 5218762752 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 07-NOV-13
channel ORA_DISK_1: finished piece 1 at 07-NOV-13
piece handle=C:\APP\TSHIFHIWA\FLASH_RECOVERY_AREA\SMSDEV\BACKUPSET\2013_11_07\O1_MF_NCSNF_TAG2013110
t=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/07/2013 17:51:55
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 5218762752 limiti did this still geting error
SQL> connect /as sysdba
Connected.
SQL> ALTER SYSTEM SET DB_RECOVERY_FILE_DEST_SIZE=4294967296 SCOPE=BOTH;
System altered.
SQL> commit;
Commit complete.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1375792 bytes
Variable Size 373293520 bytes
Database Buffers 155189248 bytes
Redo Buffers 5804032 bytes
Database mounted.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\>rman target sys/pswd@SID NOCATALOG
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Nov 7 19:16:33 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SMSDEV (DBID=3638300981, not open)
using target database control file instead of recovery catalog
RMAN> delete backup;
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=133 device type=DISK
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
3 3 1 1 AVAILABLE DISK C:\APP\TSHIFHIWA\FLASH_RECOVERY_
AREA\SMSDEV\BACKUPSET\2013_11_07\O1_MF_NCSNF_TAG20131107T182444_97QHXTTS_.BKP
4 4 1 1 AVAILABLE DISK C:\APP\TSHIFHIWA\FLASH_RECOVERY_
AREA\SMSDEV\BACKUPSET\2013_11_07\O1_MF_NCSNF_TAG20131107T183949_97QJSS14_.BKP
7 7 1 1 AVAILABLE DISK C:\APP\TSHIFHIWA\FLASH_RECOVERY_
AREA\SMSDEV\BACKUPSET\2013_11_07\O1_MF_NCSNF_TAG20131107T191006_97QLKMYL_.BKP
Do you really want to delete the above objects (enter YES or NO)? yes
deleted backup piece
backup piece handle=C:\APP\TSHIFHIWA\FLASH_RECOVERY_AREA\SMSDEV\BACKUPSET\2013_1
1_07\O1_MF_NCSNF_TAG20131107T191006_97QLKMYL_.BKP RECID=7 STAMP=830891603
Deleted 1 objects
RMAN-06207: WARNING: 2 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece C:\APP\TSHIFHIWA\FLASH_RECOVERY_AREA\SMSDEV\BACKUPSE
T\2013_11_07\O1_MF_NCSNF_TAG20131107T182444_97QHXTTS_.BKP
RMAN-06214: Backup Piece C:\APP\TSHIFHIWA\FLASH_RECOVERY_AREA\SMSDEV\BACKUPSE
T\2013_11_07\O1_MF_NCSNF_TAG20131107T183949_97QJSS14_.BKP
RMAN> backup database;
Starting backup at 07-NOV-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00010 name=C:\APP\TSHIFHIWA\PRODUCT\11.2.0\DBHOME_1\D
ATABASE\TEST
input datafile file number=00008 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\GATEWAY_TB
S.DBF
input datafile file number=00001 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\SYSTEM01.D
BF
input datafile file number=00002 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\SYSAUX01.D
BF
input datafile file number=00003 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\UNDOTBS01.
DBF
input datafile file number=00004 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\USERS01.DB
F
input datafile file number=00007 name=C:\APP\TSHIFHIWA\PRODUCT\11.2.0\DBHOME_1\D
ATABASE\TEMP09
input datafile file number=00009 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\ECADASTRE_
TBS.DBF
input datafile file number=00005 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\TEMP06.DBF
input datafile file number=00006 name=C:\APP\TSHIFHIWA\ORADATA\SMSDEV\TEMP05.DBF
channel ORA_DISK_1: starting piece 1 at 07-NOV-13
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/07/2013 19:20:
10
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 4294967296 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 07-NOV-13
channel ORA_DISK_1: finished piece 1 at 07-NOV-13
piece handle=C:\APP\TSHIFHIWA\FLASH_RECOVERY_AREA\SMSDEV\BACKUPSET\2013_11_07\O1
_MF_NCSNF_TAG20131107T191653_97QLYCJK_.BKP tag=TAG20131107T191653 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/07/2013 19:20:
10
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk
space from 4294967296 limit -
Palm Desktop Fails at startup wiht AppName: palm.exe AppVer: 4.1.4.0 ModName: mfc.dll
Folks, Wifes phone appears to have something wrong with the address book. When she syncs to the palm desk top we get the following error at palm desktop startup : Palm Desktop Fails at startup wiht AppName: palm.exe AppVer: 4.1.4.0 ModName: mfc.dll .
If i remove the address folder the desktop works until we sync again. Help!
Tony (fixer of wife phone problems.)
Post relates to: Treo 650 (Sprint)There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
Remove the address folder like you did so you can start up palm desktop. Sync DBfixit to the phone using quick install. Scan for db corruption on the device and Blobs in the calendar. After that is done, sync the Treo to the PC with the conduits set at handheld overwrites desktop. This will create a new "clean" address book on the PC and this should allow Palm desktop to open correctly.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo650sprint/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705 -
Oracle 816 for Linux "CREATE DATABASE failed"
svrmgr>startup nomount
svrmgr>create database "ora1"
CREATE DATABASE "ora1"
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-27102: out of memory
Linux Error: 1100: Unknown error 1100
Additional information: 1373184436
Additional information: 6154254
Additional information: 8
trace listing:
*** SESSION ID:(11.1) 2000-10-23 15:32:59.153
ORA-00604: error occurred at recursive SQL level 1
ORA-27102: out of memory
Linux Error: 1100: Unknown error 1100
Additional information: 1373184436
Additional information: 6154254
Additional information: 8
Offending statement at line 401
create tablespace SYSTEM datafile '/u01/app/oracle/oradata/ora1/system01.dbf' S
IZE 54M AUTOEXTEND ON NEXT 640K
default storage (initial 10K next 10K) online
linux kernel 2.2-14
glibc-2.1.3Don't run dbassist or shell script
"create database generated dbassist" under
mc (midnight commander )
Use shell promt only -
Error message: "Querying or saving changes to the database failed."
Hi all,
I can sense I'm becoming a regular on this particular forum - the problem of spending 8 hours a day trying to get this software working!
_*The problem*_
When i try and setup a new device, or modify an existing one, I get an error message when i get to the Transcode Settings page. The error message is "Querying or saving changes to the database failed." After this I get a blank screen and can no longer see my settings.
No amount of restarting has fixed this. And I cannot see a way to create a device through the client software and add transcode settings.
Help?
Thanks in advance,
BenAh very good!
Ok - it seems then that this works absolutely fine as a work around. I can create a device and then assign the device to transcode settings through the client adminsitration panel (which is indeed what I meant).
So, there is a work around. Far less pressing now, but I would like to know why I'm getting the error message all the same - I'm now concerned about the integrity of the database...
Thanks Tony!
B -
Connect to database failed,rc=-10709 Connection failed (RTE:Database name)
Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
trc file: "dev_w0", trc level: 1, release: "701"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon May 16 23:57:31 2011
B create_con (con_name=R/3)
B Loading DB library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
B Library '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
B Version of '
sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid SED
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 212
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22784 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B2C0050, size: 6607136)
M DpShMCreate: allocated sys_adm at 000000000B2C0050
M DpShMCreate: allocated wp_adm at 000000000B2C2270
M DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
M DpShMCreate: allocated tm_adm at 000000000B2C7BD0
M DpShMCreate: allocated wp_ca_adm at 000000000B86B450
M DpShMCreate: allocated appc_ca_adm at 000000000B871250
M DpShMCreate: allocated comm_adm at 000000000B873190
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
M DpShMCreate: allocated gw_adm at 000000000B8F9EA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B8F9ED0
M DpShMCreate: allocated wall_adm at 000000000B8F9EE0
M
M Mon May 16 23:57:32 2011
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sirillium1
M
M Mon May 16 23:57:33 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 212
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon May 16 23:57:33 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c 334]
We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
XUSER Entry 1
Key :DEFAULT
Username :SAPSID
UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 2
Key :c
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
XUSER Entry 3
Key :c_J2EE
Username :CONTROL
UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
XUSER Entry 4
Key :w
Username :SUPERDBA
UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :SID
Nodename :server1
Sqlmode :INTERNAL
Cachelimit :-1
Timeout :-1
Isolation :-1
Charset :<unspecified>
Any idea? we are out of ideas at this moment.
Regards
Edited by: Gustavo Goicochea on May 17, 2011 6:37 PMNatalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
We update kernel to release 142
R3trans -d and -x exit with (all with user SIDADM)
SVERS table does exist and belongs to SAPSID
dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
OK
END
'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
Why it still says that SVERS table does not exist and SQL error 942?
C Now I'm connected to SAP DB
C 00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C *** ERROR => prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
dbsdbsql.cpp 1604]
C *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp 7253]
C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS
C SELECT VERSION INTO ? FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#4 @ 1301] [dblink 1301 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1515]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10824]
M
Users seem to be ok
dbmcli on SID>sql_execute SELECT username, usermode FROM users
OK
END
'CONTROL';'ADMIN'
'SUPERDBA';'SYSDBA'
'SAPSID';'DBA'
'SAPR3';'DBA'
User SAPR3 does not have anything on database
dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
ERR
-24988,ERR_SQL: SQL error
100,Row not found
Any idea?
regards -
Firefox fails to startup, with no error message whatsoever, after installing the Fireftp add-on.
Firefox fails to startup on OS X 10.6.4, after I install the FireFTP plugin. There's no crash message or anything, just a bouncing icon on the dock and then nothing happens. Creating a new profile solves the issue until i install FireFTP, which again produces the same effect.
Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us. -
Constant failures in setting up scalable wordpress. Update ClearDB database failed.
I've been having Constant failures in setting up scalable wordpress with no luck on finding a fix.
Update ClearDB database failed is the most common issue, with Update deployment being the second issue. I though maybe it had to do with Azure changes over the last few months (beta portal), but have yet to successfully deploy a site.
Any suggestions / fixes would be greatly appreciated.
Also, i've tried utilizing the support link but it seems to hang perpetually (regardless of browser) when checking my subscription.Hi,
Two points need confirmed:
1.Have you already purse the ClearDB database?
2.What's error did you encounter when you scalable WP site?
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
One Daemon fails on startup, but I don't know which one
Hi!
During startup I see the message, that one of the daemons fails on startup, but my eyes are too slow to see which one it is
I don't have any troubles and everything works fine but I want to know what's going wrong on startup. I know there are log files in /var/log but I can't find the information I looking for.
These daemons I have in my rc.conf:
syslog-ng network netfs crond cups hal !fam alsa acpid slim mpd
So, not that much, but I don't get it (I don't know about the fam-daemon, I think I don't need it, do I?)
Thanks
BarghestThanks for your suggestion, but that didn't work.
But I just used sudo reboot after login and had a chance to see that it is the acpid daemon that fails.
I'm a bit confused, because it works fine (I can shutdown by pressing the power button) and in /var/log/acpid.log I can't find an error message.
So, is it a good idea to start it in the background?
Last edited by Barghest (2008-02-08 10:58:41) -
Attached database failed for sever "blah". (Microsoft.SqlServer.Smo)
===================================
Attach database failed for Server 'DENR-HP'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
Program Location:
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files)
at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabaseData.PrimaryFile.Attach()
at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.SendDataToServer()
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabaseWorker(String name, StringCollection files, String owner, AttachOptions attachOptions)
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files)
===================================
The database 'PlanningDB' cannot be opened because it is version 655. This server supports version 611 and earlier. A downgrade path is not supported.
Could not open new database 'PlanningDB'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=948&LinkId=20476
Server Name: (local)
Error Number: 948
Severity: 20
State: 1
Line Number: 1
Program Location:
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ConnectionManager.ExecuteTSql(ExecuteTSqlAction action, Object execObject, DataSet fillDataSet, Boolean catchException)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)Hi,
As Olaf’s post, you cannot restore or attach a database which is created from a higher version of SQL Server to a lower version of SQL Server.
However, there are some ways which can help you to move a database to a lower version of SQL Server. I recommend you to use Generate Scripts Wizard of SQL Server Management Studio (SSMS), you can script all the database objects in SQL Server 2008, then run
the SQL scripts in SQL Server 2005, for more details, you can follow the steps in this blog:
How to migrate a SQL Server database to a lower version. Also you can try to use the Import and Export Wizard to move database from SQL Server 2008 to SQL Server 2005,for more details, please review this article:
How to: Run the SQL Server Import and Export Wizard.
Thanks
Lydia Zhang -
First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register nowHi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers -
Database does not startup automatically
Oracle8i/Windows 2000 server
we have three database ,all are 9am to 6pm database
running on ARCHIVELOGMODE.
Few days back due to disk crash,
we have recovered our database using coldback up.
since we did not copy archive logs to different disk,
we lost some data.
disk was under warranty ,it was replaced.
then the database did not startup automatically.
okay the problem was,during booting(since 9am to 6pm database), we were daily logging in svrmgrl and startup the database manually.
now we have automated the above(startup) script in
windows scheduled task.
what to do to solve this problem.Hi
c:\document and settings\admin>ORADIM -EDIT -SID <SID> -startmode auto -pfile D:\oradata\SID\initsid.ora
This will add few entries to the regedit
Go to regedit
HKEY_LOCALMACHINE\software\oracle
ORA_SID_PFILE=D:\oradata\SID\initsid.ora
ORA_SID_AUTOSTART=TRUE
check these values -
9.2 create Database fails in sql.bsq
I have installed Oracle 9.2.0.1.0. It appears to have installed correctly.
I am attempting to create a new database. The script sql.bsq in %ORACLE_HOME%\rdbms\admin appears to be trying to create a cluster around line 1329. I don't use clusters (per se).
I am rcving an the following error a trace file.
*** SESSION ID:(10.1) 2003-09-08 16:59:56.000
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
Offending statement at line 1332
create cluster c_cobj# (obj# number)
pctfree 0 pctused 50
/* space for: update cdef$ set condition = 'col IS NOT NULL' at // */
size 300
storage (initial 50K) /* avoid space management during IOR I */
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 1332
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
Can someone point me to an answer for this?
I have 2 95MB files being created in the system tablespace. and I can provide you either my create database script and/or my init.ora file, if they will assist.
Thnak youThank you.
I have changed the create database statement several times to try different possiblities.
I have put maxsize unlimited. That failed.
I have put maxsize 200M (with a second file of maxsize 200M) that failed.
I have added the temp storage syntax. That failed.
All of these failed in sql.bsq and all used the ORA 1569 error about a data file being too small.
WHAT DATA FILE? The system tablespace data file(s) have never been increased (by Oracle) from the original size value I provided (whether that size was 500K, or 95M). So what data file is Oracle complaining about?
In addition, I have seen the following message in the alert_project.log:
========================================
Assigning activation ID 2846189359 (0xa9a5672f)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: D:\DATA\ORACLE\ORADATA\BURKE\LOGS\LOGFILE1.LOG
Current log# 1 seq# 1 mem# 1: D:\ORACLE\ORADATA\BURKE\LOGS\LOGFILE1.LOG
Successful open of redo thread 1.
Tue Sep 09 11:42:39 2003
SMON: enabling cache recovery
Tue Sep 09 11:42:39 2003
create tablespace SYSTEM datafile 'd:\data\Oracle\oradata\burke\system01.dbf' size 500K REUSE
autoextend on next 500K maxsize 200M,
'd:\data\Oracle\oradata\burke\system02.dbf' size 500k REUSE
autoextend on next 500K maxsize 200M
default storage (initial 10K next 10K) EXTENT MANAGEMENT DICTIONARY online
Tue Sep 09 11:42:39 2003
Completed: create tablespace SYSTEM datafile 'd:\data\Oracle
Tue Sep 09 11:42:39 2003
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
Tue Sep 09 11:42:40 2003
Errors in file d:\data\oracle\admin\burke\udump\project_ora_1324.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-01569: data file too small for system dictionary tables
========================================
The line that says
default storage (initial 10K next 10K) EXTENT MANAGEMENT DICTIONARY online
is not in my create database statement. Can it be a portion of my problem?
I don't see it in the 9.2 SQL manual for create database.
I appreciate the assistance that has been provided, but I still need some more.
Thanks you all again.
Maybe you are looking for
-
How to manage two internal hard drives
I just got my new iMac 27" with two internal hard drives (256gb SSD and 1Tb). When I migrated from my old computer it moved everything to the SSD drive. Are there some instructions somewhere to manage this and move things to the proper drive and have
-
Multiple velocity inputs in a sequence of blended moves
I used the template 'Sequence of Blended Vector Moves' in order to synchronize two different motions on two different axes. I am trying, however, to input two different velocity vectors (one for each axis move) and can't seem to find a good way to in
-
I just tried to buy the Battlestar Galactica Miniseries (4 episodes) and the message came up that there was a problem with the iTunes store using my balance to pay for it. Clues?
-
How to copy and use the RAID files for ATI SB600 for a new build
WinXP Home MSI K9A Platinum AMD Athlon X2-3600+ 2 x Seagate 250GB SATA2 3GB/s HHD 2 x HIS X1950Pro in Crossfire 2 x OCZ2A8002GK Crossfire certified modules Enermax Galaxy 850 Hello, I plan on setting this new build up with SATA RAID 0. I tried to fol
-
Often when I build a document on my Mac 10.4.1 in InDesign CS3, RE-opening it brings up a box that says that Times (TT) font is missing and that a substitute font will be used. In all of these cases i don't even have Times as one of the fonts in the