(2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database
First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
lock could not be placed on database ." Configuration as follows:
<Informational>: This server might need to be restarted after the installation completes.
Active Directory Rights Management Services
Cluster Type
Root cluster
Trust Hierarchy
Production
Configuration Database Server
Windows Internal Database
Service Account
<SERVER>\adrms
Cluster Key Storage
AD RMS centrally managed key storage
Cluster Web Site
Active Directory RMS
Cluster Internal Address
https://adrms.<SERVER>.local:443/
SSL Certificate
Create a self-signed certificate
Licensor Certificate Name
<SERVER>
Register SCP
Register now
Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
references could not be translated"
Bit of background. This server has another express instance of SQL Server 2008. I have
used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
I am installing a named instance with the same name as before but fails. I have tried
creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
Cheers
Similar Messages
-
Error Could not connect to the database - ora-12545: tns:name lookup failure
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, MaryCopy the tnsname.ora file from Oracle Database serve onto the client PC.
Path: %Oracle_home%\net80\admin\
Send me a mail if there is any other issues
Regards
Oluseyi Funmi Oduberu
Oracle Consultant
Email:[email protected]
Hi,
I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
Thanks, Mary -
Application Server failed to start- Could not sign on to database HR91
Hello there,
I am not able to boot App Server Domain (started but the status is idle.) In the log, i also find the message that
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/100
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/200
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/300
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSBRKDSP_dflt_100\
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSPUBDSP_dflt_200\
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSSUBDSP_dflt_300\
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:54](0) Server failed to start
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Server failed to start
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Server failed to start
Below is the information of my configuration file.
[Startup]
;=========================================================================
; Database Signon settings
;=========================================================================
DBName=HR91
DBType=ORACLE
UserId=PS
UserPswd=PS
ConnectId=people
ConnectPswd=peop1e
ServerName=HR91
StandbyDBName=
StandbyDBType=
StandbyUserId=
StandbyUserPswd=
[Database Options]
;=========================================================================
; Database-specific configuration options
;=========================================================================
SybasePacketSize=
UseLocalOracleDB=0
;ORACLE_SID=
EnableDBMonitoring=1
PSDB Maximum Cursors=
[Security]
;=========================================================================
; Security settings
;=========================================================================
Validate Signon with Database=0
DomainConnectionPwd=PS
Also, i can use PS/PS log into the Datamover but can not use them to log into the application designer
Any help will be appreciated...
Thank youbandar wrote:
When you have a oracle server running on the same physical machine, why do you need client to support your needs?
As you said, your oracle client installation might be an error, u can always point BIN on app server to your server installation and start the server.That was true up to Oracle 11.1 because the 32bit librairies were shipped in ORACLE_HOME even if that one was a 64bit installation.
It has been dramatically changed within Oracle 11.2 though. The 32bit libraries are not coming anymore within the Oracle 11.2 64bit, you have to explicitely install a 11.2 32bit client to make it work with Peoplesoft on Windows. And configure your Peoplesoft installation to work within that 32bit client.
Consequently, if you have all together installed on the same server (Oracle database 11.2 64bit and Peoplesoft), you must have two Oracle homes : one for the 64bit database, one for the 32bit client.
Nicolas. -
I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
.bash_profile edited for oracle11g user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=ora11g
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
.bash_profile edited for grid user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
export ORACLE_SID=+ASM
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
Till here everything seems to be OK!!!!
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
select status from v$instance
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
[grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
[grid@orcl11g ~]$ srvctl start database -d ora11g
And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
+ASM:/u01/app/grid/product/11.2.0/grid:N # line added by Agent
ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
NOW QUESTIONS!!!!!
1. Why I can't change the status of database to OPEN as grid user?
2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
3. When checking database as grid user it seems to be Database runnning... If running why it is not in OPEN state? What is running means here?
4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup the database then another error occured as in above. WHY?
5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
Thanks,
DBA_84I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems. -
Database Signon: Could not sign on to database PSH92DMO with user PS
I am trying to instal peoplesoft HRMS 9.2 on Win2003(64bits) and Oracle 11g release 11.2.0.1.0 - 64bits.
TUXEDO : 11.1.1.2.0 WITH VS2010
FRAMEWORK : V4.0
WEBLOGIC : 10.3.6.0
JAVA JDK 7 UPDATE 9 for Win x64
PEOPLETOOLS : 8.53 (directory c:PT8.53)
vARIABLE
PS_CFG_HOME
VALUE :C:\PT8.53\bin\client\winx86;C:\PT8.53\bin\server
PS_HOME
C:\PT8.53\bin\client\winx86;C:\PT8.53\bin\server
I installed
1-Oracle Database
2-Tuxedo
3-Weblogic
4-PeopleTools
5-HRMS Application
Create Database and run the scripts
Import the datamover scripts
But when I configure the application server appears the error below
APPSRV LOG :
PSADMIN.27292 (0) [2014-01-20T17:44:01.910](0) Begin boot attempt on domain PSH92DMO
PSAPPSRV.28248 (0) [2014-01-20T17:44:12.644](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.28248 (0) [2014-01-20T17:44:12.707](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\PSH92DMO\CACHE\PSAPPSRV_2\
PSAPPSRV.28248 (0) [2014-01-20T17:44:13.910](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PSH92DMO with user PS.
PSAPPSRV.28248 (0) [2014-01-20T17:44:13.925](0) Server failed to start
PSADMIN.27292 (0) [2014-01-20T17:44:20.378](0) End boot attempt on domain PSH92DMO
Setup application server
Features Settings
========== ==========
1) Pub/Sub Servers : Yes 16) DBNAME :[PSH92DMO]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[ps]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : Yes 21) AddToPATH :[C:\app\Administrator\product\11.
2.0\dbhome_2\BIN]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: Yes 23) ConnectPswd:[]
9) MCF Servers : No 24) ServerName :[]
10) Perf Collator : No 25) DomainConnectPswd:[]
11) Analytic Servers : Yes 26) WSL Port :[7000]
12) Domains Gateway : No 27) JSL Port :[9000]
28) JRAD Port :[9100]
Can anybody please help me?Thank you for the answers
But ,i made the changes, same error
Quick-configure menu -- domain: PSH92DMO
Features Settings
========== ==========
1) Pub/Sub Servers : Yes 16) DBNAME :[PSH92DMO]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : Yes 21) AddToPATH :[C:\app\Administrator\product\11.
2.0\dbhome_2\BIN]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: No 23) ConnectPswd:[peop1e]
9) MCF Servers : No 24) ServerName :[]
10) Perf Collator : No 25) DomainConnectPswd:[]
11) Analytic Servers : No 26) WSL Port :[7000]
12) Domains Gateway : No 27) JSL Port :[9000]
28) JRAD Port :[9100]
ERROR
Booting server processes ...
exec PSWATCHSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" -A -- -ID 46611 -D TESTSER
V -S PSWATCHSRV :
process id=58888 ... Started.
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D TESTSE
RV -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha
ndler
tmshutdown -qy
LOG TUXEDO
133036.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: 01-21-2014: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
133036.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: LIBTUX_CAT:262: INFO: Standard main starting
133037.WIN-1DTPDIA3H9P!PSAPPSRV.58332.58456.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
133037.WIN-1DTPDIA3H9P!tmboot.58844.59328.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
133041.WIN-1DTPDIA3H9P!BBL.57376.58876.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
133044.WIN-1DTPDIA3H9P!PSADMIN.59216: End boot attempt on domain PSH92DMO
LOG APPSRV
PSADMIN.59216 (0) [2014-01-21T13:30:25.689](0) Begin boot attempt on domain PSH92DMO
PSAPPSRV.58332 (0) [2014-01-21T13:30:36.533](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.58332 (0) [2014-01-21T13:30:36.611](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\PSH92DMO\CACHE\PSAPPSRV_2\
PSAPPSRV.58332 (0) [2014-01-21T13:30:37.830](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PSH92DMO with user PS.
PSAPPSRV.58332 (0) [2014-01-21T13:30:37.830](0) Server failed to start
PSADMIN.59216 (0) [2014-01-21T13:30:44.174](0) End boot attempt on domain PSH92DMO
file stderr is empty -
OS Version: 2000.4.3a
OS Service Release: 2000.4.5bSR21
OS Upgrade: 2000.4.5a
Bars Version: 4.0.15000
CUCM Version: 4.2(3)sr4b
During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars is misconfigured after the republishing process.
Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
I am runnig out of ideas... :-(
Any hint or idea on how to fix this is kindly appreciated
best regards
MichaelMike,
I don't have anything definitive here but I am wondering if there is a discrepency between the database names. In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is. It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302. You should see more than one. Anyway, take note of the name.
Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
Look at the values for DBConnection0 and DBConnection1.
It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
Does the in the DSN match what you expect?
Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\). This can be used to resync system account passwords.
TBH, I am just shooting in the dark here but these are things I would check.
Regards,
Bill -
Could not load library for database connection LCA
Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c 241]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c 4731]
B ***LOG BYG=> could not load library for database connection LCA [dbds#1 @ 1035] [dbds 1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors DBIF_DSQL2_CONNECTERR
Exception CX_SY_NATIVE_SQL_ERROR
Date and Time 20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
SurajHi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities e:/sapdb/programs 7.7.02.08 64 bit valid
DB Analyzer e:/sapdb/programs 7.7.02.08 64 bit valid
PCR 7301 e:/sapdb/programs 7.3.01.21 valid
PCR 7500 e:/sapdb/programs 7.5.00.42 64 bit valid
SAP Utilities e:/sapdb/programs 7.7.02.08 64 bit valid
APO LC APPS f:/sapdb/lcs/db/sap 6.00.004 64 bit valid
Redist Python e:/sapdb/programs 7.7.02.08 64 bit valid
Base e:/sapdb/programs 7.7.02.08 64 bit valid
JDBC e:/sapdb/programs 7.6.03.02 valid
Messages e:/sapdb/programs MSG 0.5010 valid
ODBC e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC 77 e:/sapdb/programs 7.7.02.08 64 bit valid
Database Kernel f:/sapdb/lcs/db 7.7.02.08 64 bit valid
Loader e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC e:/sapdb/programs 7.7.02.08 64 bit valid
SQLDBC 76 e:/sapdb/programs 7.6.01.15 64 bit valid
Fastload API e:/sapdb/programs 7.7.02.08 64 bit valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release 701
kernel make variant 701_REL
compiled on NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 6 2009 23:47:55
update level 0
patch number 50
source id 0.050
supported environment
database (SAP, table SVERS) 700
701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj -
What's wrong with this MySQL connection? "Could not create connection to database server"
I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF. -
Glom – Could not create the new database
I would like to try Glom, but always get the this error
"Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator."
This happens with both local and extern server configuration. Any ideas on how to fix this?
Regards,
RenkeIt would also help, if you install the application and just tell me, if you get the same error, when trying to create a database. Maybe it's just a problem on my side.
Regards,
Renke -
While trying to re-install Mac OS X, appears the following screen:
Install failed
Mac OS X could not be installed on your computer
The installer encountered an error that caused the installation to fail.
Contact the software manufacture for assistance.
Click Restart to restart your computer and try installing again.You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests. Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it. The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer. Also
10.7 came both on USB Flash drive and Mac App Store installer versions. Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed. A combo update is available for installing on top of any version of 10.7. Otherwise only the preceding version could be updated to the next.
10.8 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed. A combo update is available for installing on top of any version of 10.8. Otherwise only the preceding version could be updated to the next.
10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
10.9.2 combo could be installed only once 10.9 had been installed.
For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility. -
Could not signon to the database with user VP1!!
Hello All,
people tools : 8.53 - windows 7, my local one
peoplesoft application: HRMS 9.2 version -- oracle linux OS
oracle 11g database -- oracle linux OS
when i start the app server domain for HSMS application using psadmin, its not starting
when i look for appserv logs, i got this error
Password has expired
could not sign on to database with user vp1
i can able to login into the database, and able to connect to SYSADM schema also
so i tried manually updated the password operpswd in sysadm.psoprdefn table as VP1 and updated,. committed.
and tried to connect to database using datamover to encrypt the password in my local machine, it says tns could not find the id specified
but i can able to ping to linux database , tnsping is working, and i can able to establish a database session from my local one to linux server.
Still unable to start the HRMS application domain in linux server
kindly help.
Regards.oops sorry Nicolas. ITs my typo mistake.
Its peoplesoft finance application. not the hrms. and user id and password is VP1/VP1 was set during implementation.
After implementation , we have not used the application for some months. I think that may be the reason for password expire.
the following are the error:
File: sql access ManagerSQL error . stmt #: 2 Error Position: 0 Return:28001 - ORA 28001: the password has expired
SQL Access Manager: File: SQL Access ManagerSQL error. stmt #: 2 Error Position: 0 Return: 2 ORA 28001: the password has expired
Database Options: override_connection_reset:0
Database Signon: Could not sign on to database PSFNDEMO with user VP1
Server failed to start
End boot attempt on domain PSFNDEMO
i also performed the steps pointed by Hakan in your blog
On The Peoplesoft Road: Peoplesoft passwords
Still no luck.
kindly suggest
Thanks. -
Could not connect to the database
I have installed Oracle 11.5.10.2 and ADI 7.1.3.10.5
I can logon to oracle 11i but I cannot logon to ADI using the same username and password of oracle 11i.
In the ADI define databases form I have the following:
GWYUID: applsyspub/pub
FNDNAM: apps
NCA Connection: (blank)
Server ID: (blank)
I receive the following message:
''Could not connect to the database. Invalid Username or Password''
I can use tnsping and tnsping80 successfully from the client.
Any help would be appreciated
Thank you.Starting from 11.5.10 and above, you have to provide the 'Server ID'. Change the current value of 'Server ID' to match APPL_SERVER_ID value found in your dbc file.
Find the dbc file under:
$FND_TOP/secure directory
The Server ID field is one of the parameters used in setting up the database definition in ADI. -
Could not connect to Oracle database from excel macro. Getting connection not open.
Hi all,
I could not connect to oracle database using excel macro. After much R&D also, I cannot find right solution. Please help me where I am doing wrong.
Sub Button2_Click()
Dim Conn As New ADODB.Connection
Dim RS As New ADODB.Recordset
Dim Cmd As New ADODB.Command
Dim sqlText As String
Dim Row As Long
Dim Findex As Long
Dim Data As Worksheet
Dim X As Long
Dim UID As String
Dim PWD As String
Dim Server As String
Dim strCon As String
Application.Calculation = xlCalculationManual
UID = "myUserid" 'Enter the User ID
PWD = "myPassword" 'Enter the password
Server = "myHostname or myServername"
Set Data = Sheets("Sheet2")
Data.Select
Range("A:J").ClearContents
strCon1 = "Provider = Microsoft.ACE.OLEDB.12.0;DATA SOURCE=myHostName;Database=myDBname;uid=myUserid;pwd=myPassword;"
Conn.Open (strCon1)
Cmd.ActiveConnection = Conn
Cmd.CommandType = adCmdText
' Put your query next
sqlText = " select * from table "
Cmd.CommandText = sqlText
Set RS = Cmd.Execute
For X = 0 To 17
Data.Cells(1, X + 1) = RS.Fields(X).Name
Next
Do While Not RS.EOF 'this loops through the data and puts it in the spreadsheet
Row = Row + 1
For Findex = 0 To RS.Fields.Count - 1
Data.Cells(Row + 1, Findex + 1) = RS.Fields(Findex).Value
Next Findex
RS.MoveNext
Loop
Application.Calculation = xlCalculationAutomatic
Application.Calculate
End Sub
sammyI have set oci.dll in to the path specified. Prior to this I musy say that, I have 64 bit excel 2010 & installed respective drivers from the link provided http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
But
still I am facing as:-" Provider cannot be found. It may not be properly installed."
sammy -
Could not connect to Oracle database. (HY000): BI Answers Problem
Hi,
I am using OBIEE 11g and 11g admin client tool is installed in my machine. I created one rpd and I deploy that rpd in the server through Enterprise manager fusion middleware control. But when try to run the analysis from BI answers it throws and error like
"TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)".
In the rpd I use OCI default (10g/11g) and cheked that connection is successful and also when I click on view data option in the physical layer I am able to see the data. I cheked with DBAs and correct TNS entries are also there in the server. Could not understand where is the problem.
Please help.
Thanks
TitasTry like this
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE
BTW: Whats the client bit version 32/64 bit, if you have 64bit and above is not working try with Oracle client 32bit.
Pls mark correct/helpful if helps -
ORA-12154: TNS:Could not connect to Oracle database.
Hi All,
I'm getting the following error while trying to access OBIEE dashboard.
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
I have oracle 10g R2, I can connect my database using SQLPLUS. I am not able to do Update Row Count from Admin tool also. If anyone come across this issue, please share your experience. Anyhelp would be appreciated.
Thanks,
RaviThe problem is OBIEE server not able to read the tnsnames.ora file. That depends upon the what you set as ORACLE_HOME. that can be find with tnsping command at command line. Follow this article about setting up oracle home and oci drivers
http://oraclebizint.wordpress.com/2007/10/03/oracle-bi-ee-101332-identifying-oracle-homes-for-oci-drivers/
please make sure that your DB-home is the first entry in your PATH environment variable.
Have you created TNS_ADMIN environment variable. Create a environment variable TNS_ADMIN which maps to location where tnsnames.ora file located.
let me know if you are not able to load after this steps.
- Madan
Maybe you are looking for
-
ITunes music in folder but iTunes can't locate it after transfer to exHD.
I recently purchased an external hard drive to transfer all my music to since my internal hard drive is full. I followed all the directions to change the iTunes folder to the external drive but it only copied 338 of 619 folders(artist). I tried it ag
-
Hi, The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment Notebook PC support The number of my computer is : LM610EA#A2N. Could anyone please at this splendid forum take some of their precious time out to really reply my questions
-
ITunes could not copy to the iPhone because the file could not be read
So here we go again, just put some newly imported from CD songs on my iPhone the other night no problem. Updated iTunes and now I get iTunes could not copy "whatever" to the iPhone "myphone" because the file could not be read. just for fun i removed
-
PO line items delete after GRN
Hi Experts, In any PO if I have done GRN its line items should not be deleted. Means afrer grn po should not be delete only lock and delivery complete indicatior active . If any message is ther please suggest me Pooja
-
My iPad colors are fuzzy with lots of reds and purples. Looks like my digital camera when it needs to be recharged if that helps describe the issue. Can anyone help?