Database link create but not fatch data from link database give me this err

Sir I create database link with this command system create link
but when I user query then system give me this error you see in blow
SQL> create database link xyz connect to mfatest identified by mfa786 using 'aamir';
Database link created.
SQL> select * from accbal@xyz;
select * from accbal@xyz
ERROR at line 1:
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-02068: following severe error from XYZ
ORA-03113: end-of-file on communication channel
this is same database but diffrent user
scott user
mfatest user
please give me idea how i fatch data from link database/link other user
thank
aamir

On the machine where you get that error does this work ?
SQL> connect mfatest/mfa786@aamir
SQL> select count(*) from accbal;
If it doesn't, please post tnsnames.ora and sqlnet.ora from local machine, and the result, on remote machine, of
C:\> lsnrctl services

Similar Messages

  • Create release not picking data from Requisition table

    Hi All,
    I have imported release data from 11i to R12 through Requisition import program. Data got imported successfully. I have updated BLANKET_PO_HEADER_ID and BLANKET_PO_LINE_NUM column in po_requisition_lins_all table. Then I have ran Create Release Concurrent Program but that program Not picking the release from Requisition table.
    Can any one face this issue...Please let me know what thing i missing while doing this.
    Thanks.

    According to what I understand from your question, you have the Req successfully created but the the release is not happening when you run the create releases program.
    You have to have a ASL for this item with release property as Automatic Release and the BPO document number attached in the ASL attributes.
    Let me know if you have this setup or not.
    Karthik.

  • The send button is greyed out when I try to text some but not all people from my iPod touch. Any ideas how I can fix this?

    The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?

    This issue can be caused by the McAfee SiteAdvisor extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • How to allow some fixed extension go in from outside to inside but not allow go from inside to outside

    how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
    for example, allow JPEG, MOV, AVI data flow from outside to inside
    but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
    how to configure?

    Hi,
    The ZBF link sent earlier show how we can inspect URI in http request
    parameter-map type regex uri_regex_cm
       pattern “.*cmd.exe”
    class-map type inspect http uri_check_cm
       match request uri regex uri_regex_cm
    ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
    Thanks

  • PLD Report does not show data from Query

    Hello,
    SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
    Thanks,
    Nick

    Hi Nicholas,
    Please check below links.
    query based print layout design
    Print Layout Designer \Custom Reports
    How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
    http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
    Hope this help
    Regards::::
    Atul Chakraborty

  • Works in RSA3 but not when pulling from BI

    Hi,
      I created a generic dataSource(Function Module) for Bill Of Material. When testing in RSA3 it is working fine. But when pulling data from BI with particular material in the Data Selection, it is saying "No data available". If I am pulling the same with no data selection then it is giving an error message "Job terminated in source system --> Request set to red".
    When checked in SM37 I see the following error messages.
    No active nametab exists for /SAPAPO/MATKEY             DA 300
    Job cancelled after system exception ERROR_MESSAGE
    Can any body help me on this
    Thanks for your help
    Subra

    Every thing is fine in all these transactions SM58, BD87, & WE05. There is no problem with the connections at all. I replicated many times and the error is always the same.
    The error message below is the reason.
    No active nametab exists for /SAPAPO/MATKEY
    This messsage is not coming when testing in RSA3. Only when pulling the data from BI, this error is happening.
    We are not using SAPAPO but still this message is coming up.
    thanks
    Subra

  • I can not synchronize data from the prelude livelog

    I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
    The Prelude can not apply metadata in it.
    please can someone help me

    Hi -
    When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
    We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
    Michael

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Form created but not visible!!

    Form created but not visible!!
    Hi everyBody,
    I've created 2 user Forms binded with a 2 user tables (with diffrent UDOs)  and  everything works perfectly. When I tried to run it on a machine at a customer, the first form functions perfectly and the second one is created but does not appear!!!,
    I am lost!!
    Is there a problem of SQL  Server 2005?!
    Is it because of the nature of the machine (server or client machine)?
    Is there a problem of configuration (Operating System)?  I'm using Windows XP but the other machine is using Windows 2000.
    would somebody have an idea or suggestion?
    Thank you in advance

    HI Haifa,
    When the second form opens (but doesn't appear on screen) choose Windows--Cascade from the top menu. Sometimes a form will open outside the viewable area in the SBO client so choosing this menu option will reset it.
    Kind Regards,
    Owen

  • Master idoc is created but not communication idoc

    Hi Experts,
    Thrugh the change pointers i m sending the customer  master data through idocs ,
    there master idoc  is creating but not the communication idocs .
    it is not triggering the function module MASTER_IDOC_DISTRIBUTE.
    How to rectify this ,, please anybody asap..
    Regards

    Initially, check the Partner profiles(Sending and Receiving), port definitions and Distribution model(where the model view should be distributed).
    Check out for any filters added, enable change pointer also.
    Cheers..
    Santosh.
    <i><b>Reward Points for all Usefull Answers.</b></i>

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • GUI_UPLOAD NOT READING DATA FROM PRESENTATION SERVER

    H HI IN   MY APPLICATION I HAVE USED GUI _UPLOAD        TO READ DATA FROM   PRESENTATION SERVER   IT WAS WORKING FINE BUT NOW I HAVE SCHEDULED IT IN BACK BACKGROUND WHEN I   DEBUGGED IT GUI _UPLOADI NOT READING DATA FROM PRESENTATION SERVER
    Edited by: ravikumar1006 on Mar 10, 2012 1:18 PM
    Moderator message: FAQ, please search before posting, do not write in all upper case.
    Edited by: Thomas Zloch on Mar 10, 2012 3:17 PM

    The issue is that, when you schedule a program as background job runs on application server not on local pc for that program use the application server resurces  and its not possible to read files from pc. You can find a lot of answers in forum for this

  • 've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

Maybe you are looking for

  • Event ID:7405 Sql reporting services

    Hi, I received a SMS_SRS_Reporting_Point failing with 7405 on the component status failure message like this: Event ID:7405 SQL reporting services root folder "ConfigMgr_CM3" is not present or not properly configured on the reporting point server. On

  • ABAP OLE Word - Delete last page

    Dear all, I have a SAP program which prints some documents in Microsoft Word by using ABAP OLE Objects. I use a template to take the main context, and after that I send some variables in order to populate the word document. The problem is when I crea

  • Movie not transferring to iPad

    I just bought a movie on iTunes and now want to transfer it to my iPad. Whenever I try to sync it it says it was not copied "because it cannot be played on this iPad". The movie plays fine on the computer and I can find no difference between this mov

  • Downloading Firefox on Windows for Mac OS

    Is there anyway I can download FireFox for Mac OS X on my Windows 7 machine? I want to try to run it on my Mac emulator. I don't know how to setup the Mac emulator to download, so I want to download it on my W7 partition. Thank You.

  • Forcing a send to VRU label

    Hi all, i would like to know if it's possible to specify which send to vru label icm to send, regards,