Database/Password Information not being saved in CMC

Product:  CR Server XI R2.  Server is Windows Server 2003 operating system
An issue just popped up today where the database info for a report in the CMC is not being saved.   I'm in the Process tab (database link) of the Report properties of the CMC and trying to enter Custom Database login information.
The Driver is Oracle and the Server and Username fields are set correctly.  However, when setting the Password field, regardlesws of what length of a password I use, it defaults to 7 characters when showing on the screen and none of the reports run.  Even when I set the password to blank and set the password on the InfoView, the reportsw still error out.
The error message when running the report is always
Error Message:  The database logon information for this report is either incomplete or incorrect.
We've been running these reports for weeks without any issue until today.  Are there any known issues with any recent MS patches or anything that could be causing this?  The only thing I noticed was a MS Patch (KB960714) that was installed on Friday night.  Uninstalled and rebooted and still no resolution.

Hi Eric,
I'm experiencing a similar problem.  Did you ever get this problem solved?
Steve Teraji ~ 408-535-8339
Technical Manager: Capital Project Management System (CPMS)
Information Technology Dept.
City of San Jose
200 East Santa Clara Street, 5th Floor
San José, CA 95113-1905

Similar Messages

  • My Usernames Passwords are not being saved, the pop up question about saving a password or not never shows. Please let me know how I can fix this problem.

    My usernames and passwords are not being saved. I never get the prompt:
    "Do you want Firefox to remember the password?"
    I've tried the help screens but I can't find the answer. Please let me know how this can be fixed.
    Thanks,
    Doug Clarke

    Make sure that you have set Firefox to remember passwords.
    * Tools > Options > Security: Passwords: "Remember passwords for sites"
    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"

  • Passwords are not being saved at all ... settings are correct

    My setting are correct, it wont even ask me to save passwords. It works fine on my laptop. but this is my desktop. I would like this feature to work and its not .... again, my settings are correct .... please help or i will have to switch ...

    Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
    Websites remembering you and automatically log you in is stored in a cookie.
    * http://kb.mozillazine.org/Cookies
    Make sure that you do not run Firefox in permanent Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

  • Passwords are not being saved

    Firefox doesn't remember passwords. I do see a window which asks me if I want to save the password, but when I click ''Remember'' nothing happens. I can click on it countles times, but Firefox just doesn't respond.

    See http://kb.mozillazine.org/Password_Manager (Troubleshooting)

  • FTP settings not being saved

    I moved my Dreamweaver 8 to a Win 7 machine and after installing the 8.02 update the FTP settings, user and password, are not being saved.  I tried the regedit alterations with no joy.  Any thing new for Win 7?
    Kirk

    Hi N6SXR,
    As you correctly guessed, Nancy is our expert contributor on Adobe forums and not an Adobe employee. We are glad that you managed to sort your issue. Thank you for sharing the information with other users that will potentially benefit from your post.
    The versions supported by Adobe can be found at http://www.adobe.com/support/programs/policies/supported.html. While it is not our intention to force users to upgrade their software, it is also true that there has been a sea change in the way people design web pages. The team has been relentlessly focused on creating a software that meets the current demands of web designers through periodic updates that provide users with bug fixes and new features.
    The Dreamweaver standalone product is available for 30$ monthly subscription. Do have a look at the offers available http://www.adobe.com/ca/products/dreamweaver/buying-guide.html when you have the time.
    Thanks,
    Preran

  • Recently, my passwords on many websites are not being saved, forcing me to log in every 15 minutes or so.  Is anyone else experiencing this?  I am wondering if it is a result of a "bad" update?

    For the past few weeks, I have noticed that passwords on many different websites are not being saved.  I literally have to log back into each page every 15 minutes or so.  Is this the result of a bad software update?  Have an appointment at the Genius Bar tomorrow but if this can be resolved without going in, it would be preferred. 

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Messages are not being saved on N96

    On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

    I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • My outgoing messages are not being saved in my sent folder

    Half of my message that I try to send are not being saved in my sent folder. This is a huge problem causing lost documentation and copies of information and conversations I have had. The error message I get says that thunderbird was unable to save to my sent folder and asks if I would like to try again. If I say yes I get the same message over and over again until I give up and let the message be lost to cyberspace. What can I do to fix this issue and stop loosing valuable information for work?
    I am using an HP laptop running windows 8.

    What protocol is your email account using (POP or IMAP)?
    If POP, you need to make sure your local disk space is enough to save the sent messages. Check where the copies are located by looking at the account settings under '''Copies & Folders'''. When using POP, I believe a copy needs to be saved on both sides: local and server.
    If IMAP, the email server is where such copies are saved. You can also double-check such settings as mentioned above.
    Finally, if your emails are too big, this may be a restriction of your email provider, perhaps get in touch with their support and inquire about this to rule it out as the cause of the problem. Could you share more details about the kind of emails that fail to have a local copy saved or is it for each and every email?

  • IR web client server(0):Database connection information not accessible.

    Hi,
    We upgraded our system from Hyperion 9.3 to EPM 11.1.2.2. We mainly use the reporting tools SQR production and Interactive reporting.
    Using workspace as an admin if I run a BQY everything works fine but when I try to do the same as other users I get the error "server(0):Database connection information not accessible. Processing is disabled" from the
    I have migrated everything form the old version and haven't changes anything since. It looks like a provisioning issue and I tried looking and comparing everything from the present production(old 9.3 system).
    Did anyone else face the same issue before? Any suggestions on where to look into.
    Thank you in advance.

    Hi ,
    You have to go to my oracle support website link is : https://support.oracle.com/epmos/faces/MosIndex.jspx?_afrLoop=7929796452543&_afrWindowMode=0&_adf.ctrl-state=113hdvh7xd_4
    login with your oracle ID and password you have for your company and search for the document number in the "search knowledge base" which will show up on the top right corner of the page.
    The search will show you the document and you can access it.
    Hope this helps.

  • Start Menu Configuration not being saved using BootCamp in Windows 7

    On a couple nearly identical MacBook Pros (ordered and built within the last couple months) I've encountered an issue where my Start Menu configuration is not being saved using BootCamp in Windows 7. Only the 64 bit version was tested, I don't have a 32 bit handy.
    "Stickying" icons on the top of the shortcuts seems to hold, but changing the display to small icons, adding "administrative tools", menu displays from opening folders to showing lists, or even just telling it to not highlight newly installed programs are lost on a reboot. The changes do appear to work at first, but again, are lost on reboot.
    Fwiw I'm using the machine in an Active Directory environment. If you need any additional information or further details just ask.

    On a couple nearly identical MacBook Pros (ordered and built within the last couple months) I've encountered an issue where my Start Menu configuration is not being saved using BootCamp in Windows 7. Only the 64 bit version was tested, I don't have a 32 bit handy.
    "Stickying" icons on the top of the shortcuts seems to hold, but changing the display to small icons, adding "administrative tools", menu displays from opening folders to showing lists, or even just telling it to not highlight newly installed programs are lost on a reboot. The changes do appear to work at first, but again, are lost on reboot.
    Fwiw I'm using the machine in an Active Directory environment. If you need any additional information or further details just ask.

  • Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

    Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

    Here is more information and hopefully a better explanation. My version of
    LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
    done in the basic module. That means that I can correct exposure,
    highlights, shadows etc. but once I go to another picture and returned to
    the edited one the histogram (on the edited photo) and specifically the
    clipping triangles are white or some other color. This is normally suppose
    to indicate that some channel or all channels are clipped in the
    highlight/shadow areas. If I adjust any slider in the Basic panel even as
    little as one +/- value or press the J-key, the histogram will now show the
    original edit. Moving on to another photo and then returning to to
    previously edited one and again the edits are "not saved" and I have to hit
    the J-key or adjust a slider to see the previously edited information
    reflected in the histogram.
    This is especially frustrating for fours reasons. If I have edited a shoot
    and return to it I cannot see from the clipping information whether the
    original edit was correct and of course I might re-edit it (to some now
    incorrect value). This brings up the second issue synchronization. I can't
    rely on it because if I go back to fine tune a specific image in the batch
    the triangles are white or some other color for that and every image. I have
    to hit the J-key to show/hide clipping or the back slash key to see
    before/after previews. This is the third issue which is very time consuming
    and inefficient regarding my workflow. The forth issue is that I have
    noticed that normally when an image is saved in PS, LR adds a copy of the
    saved version to its catalogue. I have noticed that the PS to LR saves are
    all wrong in terms of exposure (they are much lighter in tone) than the
    original LR edit and the PS edit on my screen. If I check the PS to LR photo
    in LR I notice that the Basic panel values have been changed and that I have
    to sync the image with the originally edited RAW/NEF LR file to get it to
    look the same.
    Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
    monitor to view my NEF files. I have reverted back to using LR 4 however I
    am not sure if I should expect compatibility problems with Camera Raw 7.4 in
    LR 4 vs. Camera Raw 8.6 in LR 5.
    Note 2.) I am going to do an import converting everything to .dng  to see if
    this is a work around.
    Note 3). I would be interested in knowing if this issue is related to the PS
    RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
    Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
    10.10.1
    Hopefully someone else has noticed this problem. Any shared information
    would be valuable. Thanks for the reply.

  • Sent emails on my iphone not being saved on my hotmail's sent items

    Sent emails on my iphone are not being saved on my hotmail's sent items

    Delete the account on your phone under settings> Mail, contacts, calendars> hotmail account> delete. This will not erase anything on your email account as your phone only accesses the server. Then you can add the account again in the same place in settings. Just make sure you have the password so you can add it right away. Sometimes people forget their password because they never use it. If that's the case you can go online and click "forgot password" and resset it before you uninstall it on your phone. Hope this helps.

  • Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    Hi there ethangabe,
    You may find the information in the article below helpful.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/ht2589
    -Griff W. 

Maybe you are looking for